Download or read book A Compressible Navier Stokes Solver with Two equation and Reynolds Stress Turbulence Close Models written by Joseph Hicks Morrison and published by . This book was released on 1992 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Compressible Navier Stokes Solver with Two equation and Reynolds Stress Turbulence Closure Models written by Joseph H. Morrison and published by . This book was released on 1992 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Compressible Navier Stokes Solver with Two Equation and Reynolds Stress Turbulence Closure Models written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-27 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report outlines the development of a general purpose aerodynamic solver for compressible turbulent flows. Turbulent closure is achieved using either two equation or Reynolds stress transportation equations. The applicable equation set consists of Favre-averaged conservation equations for the mass, momentum and total energy, and transport equations for the turbulent stresses and turbulent dissipation rate. In order to develop a scheme with good shock capturing capabilities, good accuracy and general geometric capabilities, a multi-block cell centered finite volume approach is used. Viscous fluxes are discretized using a finite volume representation of a central difference operator and the source terms are treated as an integral over the control volume. The methodology is validated by testing the algorithm on both two and three dimensional flows. Both the two equation and Reynolds stress models are used on a two dimensional 10 degree compression ramp at Mach 3, and the two equation model is used on the three dimensional flow over a cone at angle of attack at Mach 3.5. With the development of this algorithm, it is now possible to compute complex, compressible high speed flow fields using both two equation and Reynolds stress turbulent closure models, with the capability of eventually evaluating their predictive performance. Morrison, Joseph H. Unspecified Center NAS1-19320; RTOP 505-59-50-01...
Download or read book Assessment of an Explicit Algebraic Reynolds Stress Model written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-05-29 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study assesses an explicit algebraic Reynolds stress turbulence model in the in the three-dimensional Reynolds averaged Navier-Stokes (RANS) solver, ISAAC (Integrated Solution Algorithm for Arbitrary Con gurations). Additionally, it compares solutions for two select configurations between ISAAC and the RANS solver PAB3D. This study compares with either direct numerical simulation data, experimental data, or empirical models for several different geometries with compressible, separated, and high Reynolds number flows. In general, the turbulence model matched data or followed experimental trends well, and for the selected configurations, the computational results of ISAAC closely matched those of PAB3D using the same turbulence model.Carlson, Jan-ReneeLangley Research CenterCOMPUTATIONAL FLUID DYNAMICS; REYNOLDS STRESS; NAVIER-STOKES EQUATION; REYNOLDS AVERAGING; TURBULENCE MODELS; DIRECT NUMERICAL SIMULATION; MATHEMATICAL MODELS; TRENDS
Download or read book Navier Stokes Computations with One Equation Turbulence Model for Flows Along Concave Wall Surfaces written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-24 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents the use of a time-marching three-dimensional compressible Navier-Stokes equation numerical solver with a one-equation turbulence model to simulate the flow fields developed along concave wall surfaces without and with a downstream extension flat wall surface. The 3-D Navier- Stokes numerical solver came from the NASA Glenn-HT code. The one-equation turbulence model was derived from the Spalart and Allmaras model. The computational approach was first calibrated with the computations of the velocity and Reynolds shear stress profiles of a steady flat plate boundary layer flow. The computational approach was then used to simulate developing boundary layer flows along concave wall surfaces without and with a downstream extension wall. The author investigated the computational results of surface friction factors, near surface velocity components, near wall temperatures, and a turbulent shear stress component in terms of turbulence modeling, computational mesh configurations, inlet turbulence level, and time iteration step. The computational results were compared with existing measurements of skin friction factors, velocity components, and shear stresses of the developing boundary layer flows. With a fine computational mesh and a one-equation model, the computational approach could predict accurately the skin friction factors, near surface velocity and temperature, and shear stress within the flows. The computed velocity components and shear stresses also showed the vortices effect on the velocity variations over a concave wall. The computed eddy viscosities at the near wall locations were also compared with the results from a two equation turbulence modeling technique. The inlet turbulence length scale was found to have little effect on the eddy viscosities at locations near the concave wall surface. The eddy viscosities, from the one-equation and two-equation modeling, were comparable at most stream-wise stations. The present one-equation turbulence
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Earth to orbit Propulsion Technology 1994 written by Robert J. Richmond and published by . This book was released on 1994 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalogue United States Public Documents written by and published by . This book was released on 1995 with total page 1732 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A First Course in Turbulence written by Henk Tennekes and published by MIT Press. This book was released on 2018-04-27 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book specifically designed to offer the student a smooth transitionary course between elementary fluid dynamics (which gives only last-minute attention to turbulence) and the professional literature on turbulent flow, where an advanced viewpoint is assumed. The subject of turbulence, the most forbidding in fluid dynamics, has usually proved treacherous to the beginner, caught in the whirls and eddies of its nonlinearities and statistical imponderables. This is the first book specifically designed to offer the student a smooth transitionary course between elementary fluid dynamics (which gives only last-minute attention to turbulence) and the professional literature on turbulent flow, where an advanced viewpoint is assumed. Moreover, the text has been developed for students, engineers, and scientists with different technical backgrounds and interests. Almost all flows, natural and man-made, are turbulent. Thus the subject is the concern of geophysical and environmental scientists (in dealing with atmospheric jet streams, ocean currents, and the flow of rivers, for example), of astrophysicists (in studying the photospheres of the sun and stars or mapping gaseous nebulae), and of engineers (in calculating pipe flows, jets, or wakes). Many such examples are discussed in the book. The approach taken avoids the difficulties of advanced mathematical development on the one side and the morass of experimental detail and empirical data on the other. As a result of following its midstream course, the text gives the student a physical understanding of the subject and deepens his intuitive insight into those problems that cannot now be rigorously solved. In particular, dimensional analysis is used extensively in dealing with those problems whose exact solution is mathematically elusive. Dimensional reasoning, scale arguments, and similarity rules are introduced at the beginning and are applied throughout. A discussion of Reynolds stress and the kinetic theory of gases provides the contrast needed to put mixing-length theory into proper perspective: the authors present a thorough comparison between the mixing-length models and dimensional analysis of shear flows. This is followed by an extensive treatment of vorticity dynamics, including vortex stretching and vorticity budgets. Two chapters are devoted to boundary-free shear flows and well-bounded turbulent shear flows. The examples presented include wakes, jets, shear layers, thermal plumes, atmospheric boundary layers, pipe and channel flow, and boundary layers in pressure gradients. The spatial structure of turbulent flow has been the subject of analysis in the book up to this point, at which a compact but thorough introduction to statistical methods is given. This prepares the reader to understand the stochastic and spectral structure of turbulence. The remainder of the book consists of applications of the statistical approach to the study of turbulent transport (including diffusion and mixing) and turbulent spectra.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1984 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1994 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Finite Element Method Set written by O. C. Zienkiewicz and published by Elsevier. This book was released on 2005-11-25 with total page 1863 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sixth editions of these seminal books deliver the most up to date and comprehensive reference yet on the finite element method for all engineers and mathematicians. Renowned for their scope, range and authority, the new editions have been significantly developed in terms of both contents and scope. Each book is now complete in its own right and provides self-contained reference; used together they provide a formidable resource covering the theory and the application of the universally used FEM. Written by the leading professors in their fields, the three books cover the basis of the method, its application to solid mechanics and to fluid dynamics. * This is THE classic finite element method set, by two the subject's leading authors * FEM is a constantly developing subject, and any professional or student of engineering involved in understanding the computational modelling of physical systems will inevitably use the techniques in these books * Fully up-to-date; ideal for teaching and reference
Download or read book The Finite Element Method for Fluid Dynamics written by O. C. Zienkiewicz and published by Elsevier. This book was released on 2005-12-08 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dealing with general problems in fluid mechanics, convection diffusion, compressible and incompressible laminar and turbulent flow, shallow water flows and waves, this is the leading text and reference for engineers working with fluid dynamics in fields including aerospace engineering, vehicle design, thermal engineering and many other engineering applications. The new edition is a complete fluids text and reference in its own right. Along with its companion volumes it forms part of the indispensable Finite Element Method series. New material in this edition includes sub-grid scale modelling; artificial compressibility; full new chapters on turbulent flows, free surface flows and porous medium flows; expanded shallow water flows plus long, medium and short waves; and advances in parallel computing. A complete, stand-alone reference on fluid mechanics applications of the FEM for mechanical, aeronautical, automotive, marine, chemical and civil engineers. Extensive new coverage of turbulent flow and free surface treatments
Download or read book Transonic Symposium Theory Application and Experiment written by and published by . This book was released on 1989 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simulation and Modeling of Turbulent Flows written by Thomas B. Gatski and published by Oxford University Press. This book was released on 1996-07-11 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides students and researchers in fluid engineering with an up-to-date overview of turbulent flow research in the areas of simulation and modeling. A key element of the book is the systematic, rational development of turbulence closure models and related aspects of modern turbulent flow theory and prediction. Starting with a review of the spectral dynamics of homogenous and inhomogeneous turbulent flows, succeeding chapters deal with numerical simulation techniques, renormalization group methods and turbulent closure modeling. Each chapter is authored by recognized leaders in their respective fields, and each provides a thorough and cohesive treatment of the subject.
Download or read book AIAA Journal written by American Institute of Aeronautics and Astronautics and published by . This book was released on 2005 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Institute for Computational Mechanics in Propulsion Seventh Annual Report 1992 written by Charles E. Feiler and published by . This book was released on 1993 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
