Download or read book A COMPARISON OF QUASI STATIC INDENTATION TO LOW VELOCITY IMPACT NASA TP 2000 210481 DEC 6 2000 written by and published by . This book was released on 2003* with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Summary of a Study to Determine Low Velocity Impact Damage and Residual Tension Strength for a Thick Graphite Epoxy Motor Case written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-11 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Impacters of various shapes and masses were dropped from various heights onto 36 mm (1.4 in.) thick graphite/epoxy cylinders, which represented filament wound cases (FWC) for the booster motors of the Space Shuttle. Insert solid propellant was cast into some of the cylinders. The cylinders were impacted numerous times around the circumference and then cut into 51 mm (2.0 in.) wide tension specimens, each containing an impact site. Four indenters were used: a sharp corner, two hemispheres, and a bolt-like rod. The diameters of the hemispheres were 12.7 mm mm (0.5 in.) and 25.4 mm (1.0 in.), and the diameter of the rod was 6.3 mm (0.25 in.). Impacts with the rod were simulated by pressing the rod against the face of specimens. For the hemispheres, the damage initiated beneath the surface at a critical contact pressure and was not visible on the surface until an even larger pressure was exceeded. The damage consisted of matrix cracking and broken fiber. The rod an corner made visible surface damage in all tests. For the hemispheres, the tension strength was reduced considerably before the damage was visible on the surface, 30 percent for the 25.4 mm (1.0 in.) diameter hemisphere and 10 percent for the 12.7 mm (0.5 in.) diameter hemisphere. Analytical methods were used to predict the damage and residual tension strength. A factor of safety to account for nonvisible damage was determined. Poe, C. C., Jr. Langley Research Center RTOP 505-63-01-05...
Download or read book Infrared Thermography Recent Advances and Future Trends written by Carosena Meola and published by Bentham Science Publishers. This book was released on 2012-08-03 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared thermography (IRT) is a non-contact, non-invasive methodology which allows for detection of thermal energy that is radiated from objects in the infrared band of the electromagnetic spectrum, for conversion of such energy into a visible image (such as a surface temperature map). This feature represents a great potential to be exploited in a vast variety of fields from aerospace to civil engineering, to medicine, to agriculture, etc. However, IRT is still not adequately enclosed in industrial instrumentation and there are still potential users who might benefit from the use of such a technique and who are not aware of their existence. This e-book conveys information about basic IRT theory, infrared detectors, signal digitalization and applications of infrared thermography in many fields such as medicine, foodstuff conservation, fluid-dynamics, architecture, anthropology, condition monitoring, non destructive testing and evaluation of materials and structures. The volume promotes an exchange of information between the academic world and industry, and shares methodologies which were independently developed and applied in specific disciplines.
Download or read book Infrared Thermography in the Evaluation of Aerospace Composite Materials written by Carosena Meola and published by Woodhead Publishing. This book was released on 2016-06-29 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared Thermography in the Evaluation of Aerospace Composite Materials: Infrared Thermography to Composites provides an update on infrared thermography, a fast and reliable method for non-destructive evaluation of composite materials used in the aerospace field. The book describes composites and the main problems that can arise both during manufacturing and when in service, and then covers different thermographic non-destructive testing and evaluation techniques, including pulse thermography, lock-in thermography, and pulse phase. Each technique includes key examples and relevant references, with sections devoted to the usefulness of an infrared imaging device to monitor the behavior of a material under load, such as impact and bending. The book also includes discussions on standards, personnel certification, and training. - Provides a comprehensive look at the use of infrared thermography in the materials science field - Describes thermographic techniques of non-destructive testing in an easy way, and with links to aeronautical standards - Addresses different types of composite problems and how they can be helped through the use of infrared thermography - Includes key examples and relevant references, with sections devoted to the usefulness of an infrared imaging device to monitor the behavior of a material under load
Download or read book A Comparison of Quasi Static Indentation to Low Velocity Impact written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-08-27 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: A static test method for modeling low-velocity foreign object impact events to composites would prove to be very beneficial to researchers since much more data can be obtained from a static test than from an impact test. In order to examine if this is feasible, a series of static indentation and low-velocity impact tests were carried out and compared. Square specimens of many sizes and thicknesses were utilized to cover the array of types of low velocity impact events. Laminates with a pi/4 stacking sequence were employed since this is by far the most common type of engineering laminate. Three distinct flexural rigidities -under two different boundary conditions were tested in order to obtain damage ranging from that due to large deflection to contact stresses and levels in-between to examine if the static indentation-impact comparisons are valid under the spectrum of damage modes that can be experienced. Comparisons between static indentation and low-velocity impact tests were based on the maximum applied transverse load. The dependent parameters examined included dent depth, back surface crack length, delamination area, and to a limited extent, load-deflection behavior. Results showed that no distinct differences could be seen between the static indentation tests and the low-velocity impact tests, indicating that static indentation can be used to represent a low-velocity impact event.Nettles, A. T. and Douglas, M. J.Marshall Space Flight CenterLOW SPEED; COMPOSITE MATERIALS; IMPACT TESTS; INDENTATION; STATIC TESTS; MECHANICAL PROPERTIES; CRACK PROPAGATION; DEFORMATION; DELAMINATING; BOUNDARY CONDITIONS; NONDESTRUCTIVE TESTS; TRANSVERSE LOADS...
Download or read book Design and Manufacture of Textile Composites written by A C Long and published by CRC Press. This book was released on 2006-01-05 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textile composites encompass a rather narrow range of materials, based on three-dimensional reinforcements produced using specialist equipment. This book describes the design, manufacture and applications of textile composites. The intention is to describe the broad range of polymer composite materials with textile reinforcements, from woven and non-crimp commodity fabrics to 3-D textiles and their applications. The book gives particular attention to the modelling of textile structures, composites manufacturing methods, and subsequent component performance. This practical book is an invaluable guide for manufacturers of polymer composite components, end-users and designers, structural materials researchers, and textile manufacturers involved in the development of new products with textile composites.
Download or read book Theory and Practice of Infrared Technology for Nondestructive Testing written by Xavier Maldague and published by Wiley-Interscience. This book was released on 2001-04-30 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes fundamental concepts of theory, instrumentation, and experimental practice as well as practical applications. An important chapter setting the book apart from other publications describes the properties of materials and presents case studies from industry. In addition, a program called IRNDT accompanies the book and is available on the Wiley ftp site. The program includes an image bank that can be used to test the principles covered in the book. * All chapters end with summaries, problems, and questions. * Authored by an acknowledged expert in the field. * Material draws on case studies to illustrate major points.
