Download or read book A Comparative Study of Assembly Job Shop Scheduling Using Simulation Heuristics and Meta Heuristics written by Haili Lu and published by Open Dissertation Press. This book was released on 2017-01-26 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation, "A Comparative Study of Assembly Job Shop Scheduling Using Simulation, Heuristics and Meta-heuristics" by Haili, Lu, 吕海利, was obtained from The University of Hong Kong (Pokfulam, Hong Kong) and is being sold pursuant to Creative Commons: Attribution 3.0 Hong Kong License. The content of this dissertation has not been altered in any way. We have altered the formatting in order to facilitate the ease of printing and reading of the dissertation. All rights not granted by the above license are retained by the author. DOI: 10.5353/th_b4702901 Subjects: Genetic algorithms Heuristic programming Production scheduling

Download or read book A Comparative Study of Assembly Job Shop Scheduling Using Simulation Heuristics and Meta heuristics written by Haili Lü and published by . This book was released on 2011 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metaheuristics for Production Scheduling written by Bassem Jarboui and published by John Wiley & Sons. This book was released on 2013-06-12 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the potentialities of metaheuristics for solving production scheduling problems and the relationship between these two fields. For the past several years, there has been an increasing interest in using metaheuristic methods to solve scheduling problems. The main reasons for this are that such problems are generally hard to solve to optimality, as well as the fact that metaheuristics provide very good solutions in a reasonable time. The first part of the book presents eight applications of metaheuristics for solving various mono-objective scheduling problems. The second part is itself split into two, the first section being devoted to five multi-objective problems to which metaheuristics are adapted, while the second tackles various transportation problems related to the organization of production systems. Many real-world applications are presented by the authors, making this an invaluable resource for researchers and students in engineering, economics, mathematics and computer science. Contents 1. An Estimation of Distribution Algorithm for Solving Flow Shop Scheduling Problems with Sequence-dependent Family Setup Times, Mansour Eddaly, Bassem Jarboui, Radhouan Bouabda, Patrick Siarry and Abdelwaheb Rebaï. 2. Genetic Algorithms for Solving Flexible Job Shop Scheduling Problems, Imed Kacem. 3. A Hybrid GRASP-Differential Evolution Algorithm for Solving Flow Shop Scheduling Problems with No-Wait Constraints, Hanen Akrout, Bassem Jarboui, Patrick Siarry and Abdelwaheb Rebaï. 4. A Comparison of Local Search Metaheuristics for a Hierarchical Flow Shop Optimization Problem with Time Lags, Emna Dhouib, Jacques Teghem, Daniel Tuyttens and Taïcir Loukil. 5. Neutrality in Flow Shop Scheduling Problems: Landscape Structure and Local Search, Marie-Eléonore Marmion. 6. Evolutionary Metaheuristic Based on Genetic Algorithm: Application to Hybrid Flow Shop Problem with Availability Constraints, Nadia Chaaben, Racem Mellouli and Faouzi Masmoudi. 7. Models and Methods in Graph Coloration for Various Production Problems, Nicolas Zufferey. 8. Mathematical Programming and Heuristics for Scheduling Problems with Early and Tardy Penalties, Mustapha Ratli, Rachid Benmansour, Rita Macedo, Saïd Hanafi, Christophe Wilbaut. 9. Metaheuristics for Biobjective Flow Shop Scheduling, Matthieu Basseur and Arnaud Liefooghe. 10. Pareto Solution Strategies for the Industrial Car Sequencing Problem, Caroline Gagné, Arnaud Zinflou and Marc Gravel. 11. Multi-Objective Metaheuristics for the Joint Scheduling of Production and Maintenance, Ali Berrichi and Farouk Yalaoui. 12. Optimization via a Genetic Algorithm Parametrizing the AHP Method for Multicriteria Workshop Scheduling, Fouzia Ounnar, Patrick Pujo and Afef Denguir. 13. A Multicriteria Genetic Algorithm for the Resource-constrained Task Scheduling Problem, Olfa Dridi, Saoussen Krichen and Adel Guitouni. 14. Metaheuristics for the Solution of Vehicle Routing Problems in a Dynamic Context, Tienté Hsu, Gilles Gonçalves and Rémy Dupas. 15. Combination of a Metaheuristic and a Simulation Model for the Scheduling of Resource-constrained Transport Activities, Virginie André, Nathalie Grangeon and Sylvie Norre. 16. Vehicle Routing Problems with Scheduling Constraints, Rahma Lahyani, Frédéric Semet and Benoît Trouillet. 17. Metaheuristics for Job Shop Scheduling with Transportation, Qiao Zhang, Hervé Manier, Marie-Ange Manier. About the Authors Bassem Jarboui is Professor at the University of Sfax, Tunisia. Patrick Siarry is Professor at the Laboratoire Images, Signaux et Systèmes Intelligents (LISSI), University of Paris-Est Créteil, France. Jacques Teghem is Professor at the University of Mons, Belgium.

Download or read book A Comparative Study of Heuristics in Job shop Scheduling written by Fulvio Schizzi and published by . This book was released on 1972 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Comparative Study of Scheduling Heuristics to Improve the On time Performance of Jobs at an Electrical Manufacturing Facility written by Douglas H. Grabenstetter and published by . This book was released on 2001 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Comparative Study of Manpower Scheduling Algorithms written by Aaron Paul Blossom and published by . This book was released on 1993 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Planning Production and Inventories in the Extended Enterprise written by Karl G Kempf and published by Springer Science & Business Media. This book was released on 2011-03-23 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: In two volumes, Planning Production and Inventories in the Extended Enterprise: A State of the Art Handbook examines production planning across the extended enterprise against a backdrop of important gaps between theory and practice. The early chapters describe the multifaceted nature of production planning problems and reveal many of the core complexities. The middle chapters describe recent research on theoretical techniques to manage these complexities. Accounts of production planning system currently in use in various industries are included in the later chapters. Throughout the two volumes there are suggestions on promising directions for future work focused on closing the gaps. Included in Volume 1 are papers on the Historical Foundations of Manufacturing Planning and Control; Advanced Planning and Scheduling Systems; Sustainable Product Development and Manufacturing; Uncertainty and Production Planning; Demand Forecasting; Production Capacity; Data in Production and Supply Chain Planning; Financial Uncertainty in SC Models; Field Based Research in Production Control; Collaborative SCM; Sequencing and Coordination in Outsourcing and Subcontracting Operations; Inventory Management; Pricing, Variety and Inventory Decisions for Substitutable Items; Perishable and Aging Inventories; Optimization Models of Production Planning Problems; Aggregate Modeling of Manufacturing Systems; Robust Stability Analysis of Decentralized Supply Chains; Simulation in Production Planning; and Simulation-Optimization in Support of Tactical and Strategic Enterprise Decisions. Included in Volume 2 are papers on Workload and Lead-Time Considerations under Uncertainty; Production Planning and Scheduling; Production Planning Effects on Dynamic Behavior of A Simple Supply Chain; Supply and Demand in Assemble-to-Order Supply Chains; Quantitative Risk Assessment in Supply Chains; A Practical Multi-Echelon Inventory Model with Semiconductor Application; Supplier Managed Inventory for Custom Items with Long Lead Times; Decentralized Supply Chain Formation; A Cooperative Game Approach to Procurement Network Formation; Flexible SC Contracts with Options; Build-to-Order Meets Global Sourcing for the Auto Industry; Practical Modeling in Automotive Production; Discrete Event Simulation Models; Diagnosing and Tuning a Statistical Forecasting System; Enterprise-Wide SC Planning in Semiconductor and Package Operations; Production Planning in Plastics; SC Execution Using Predictive Control; Production Scheduling in The Pharmaceutical Industry; Computerized Scheduling for Continuous Casting in Steelmaking; and Multi-Model Production Planning and Scheduling in an Industrial Environment.

Download or read book Proceedings of the 14th International Conference on Flexible Automation and Intelligent Manufacturing written by Lihui Wang and published by NRC Research Press. This book was released on 2004 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Resource Constrained Project Scheduling written by Christian Artigues and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title presents a large variety of models and algorithms dedicated to the resource-constrained project scheduling problem (RCPSP), which aims at scheduling at minimal duration a set of activities subject to precedence constraints and limited resource availabilities. In the first part, the standard variant of RCPSP is presented and analyzed as a combinatorial optimization problem. Constraint programming and integer linear programming formulations are given. Relaxations based on these formulations and also on related scheduling problems are presented. Exact methods and heuristics are surveyed. Computational experiments, aiming at providing an empirical insight on the difficulty of the problem, are provided. The second part of the book focuses on several other variants of the RCPSP and on their solution methods. Each variant takes account of real-life characteristics which are not considered in the standard version, such as possible interruptions of activities, production and consumption of resources, cost-based approaches and uncertainty considerations. The last part presents industrial case studies where the RCPSP plays a central part. Applications are presented in various domains such as assembly shop and rolling ingots production scheduling, project management in information technology companies and instruction scheduling for VLIW processor architectures.

Download or read book Metaheuristic Search Concepts written by Günther Zäpfel and published by Springer Science & Business Media. This book was released on 2010-03-10 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many decision problems, e.g. from the area of production and logistics manage ment, the evaluation of alternatives and the determination of an optimal or at least suboptimal solution is an important but dif?cult task. For most such problems no ef?cient algorithm is known and classical approaches of Operations Research like Mixed Integer Linear Programming or Dynamic Pro gramming are often of limited use due to excessive computation time. Therefore, dedicated heuristic solution approaches have been developed which aim at providing good solutions in reasonable time for a given problem. However, such methods have two major drawbacks: First, they are tailored to a speci?c prob lem and their adaption to other problems is dif?cult and in many cases even impos sible. Second, they are typically designed to “build” one single solution in the most effective way, whereas most decision problems have a vast number of feasible solu tions. Hence usually the chances are high that there exist better ones. To overcome these limitations, problem independent search strategies, in particular metaheuris tics, have been proposed. This book provides an elementary step by step introduction to metaheuristics focusing on the search concepts they are based on. The ?rst part demonstrates un derlying concepts of search strategies using a simple example optimization problem.

Download or read book A Simulation Investigation of Group Scheduling Heuristics in a Job Shop Cell written by Robert A. Ruben and published by . This book was released on 1991 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 38 (thesis year 1993) a total of 13,787 thesis titles from 22 Canadian and 164 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 38 reports theses submitted in 1993, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.

Download or read book Computational Methods for Application in Industry 4 0 written by Nikolaos E. Karkalos and published by Springer. This book was released on 2018-05-21 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents computational and statistical methods used by intelligent systems within the concept of Industry 4.0. The methods include among others evolution-based and swarm intelligence-based methods. Each method is explained in its fundamental aspects, while some notable bibliography is provided for further reading. This book describes each methods' principles and compares them. It is intended for researchers who are new in computational and statistical methods but also to experienced users.

Download or read book Focused Simulated Annealing Search an Application to Job shop Scheduling written by Carnegie Mellon University. Robotics Institute and published by . This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: "This paper presents a simulated annealing search procedure developed to solve job shop scheduling problems simulataneously subject to tardiness and inventory costs. The procedure is shown to significantly increase schedule quality compared to multiple combinations of dispatch rules and release policies, though at the expense of intense computational efforts. A meta-heuristic procedure is developed that aims at increasing the efficiency of simulated annealing by dynamically inflating the costs associated with major inefficiencies in the current solution. Three different variations of this procedure are considered. One of these variations is shown to yield significant reductions in computation time, especially on problems where search is more likely to get trapped in local minima. We analyze why this variation of the meta- heuristic is more effective than the others."

Download or read book The job shop scheduling problem a simulation approach to finding suitable operating heuristics written by Izak Aldert Krige and published by . This book was released on 1975 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Focused Simulated Annealing Search an Application to Job shop Scheduling written by Carnegie-Mellon University. Robotics Institute and published by . This book was released on 1994 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: "This paper presents a simulated annealing search procedure developed to solve job shop scheduling problems simulataneously subject to tardiness and inventory costs. The procedure is shown to significantly increase schedule quality compared to multiple combinations of dispatch rules and release policies, though at the expense of intense computational efforts. A meta-heuristic procedure is developed that aims at increasing the efficiency of simulated annealing by dynamically inflating the costs associated with major inefficiencies in the current solution. Three different variations of this procedure are considered. One of these variations is shown to yield significant reductions in computation time, especially on problems where search is more likely to get trapped in local minima. We analyze why this variation of the meta- heuristic is more effective than the others."

Download or read book The Two machine Open Shop Problem with Time Delays written by Li Chuan Zhang and published by . This book was released on 2012 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: