Download or read book A Clay Calibration Chamber for Testing Field Devices written by WF. Anderson and published by . This book was released on 1991 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper describes the design of a calibration chamber suitable for the preparation of uniform clay beds in which the performance of full-size field test devices may be studied. Details are given of the clay bed preparation procedure by which clay slurry is initially consolidated under K0 conditions and then further conso using equal or unequal horizontal and vertical stresses. Field equipment may be tested in the clay bed, which is maintained under known horizontal and vertical boundary stresses during the test. Self-boring pressuremeter tests have been successfully carried out in the clay bed.
Download or read book Calibration Chamber Testing written by An-Bin Huang and published by . This book was released on 1991 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sustainable Construction Materials and Technologies written by Yoon-Moon Chun and published by CRC Press. This book was released on 2007-05-31 with total page 1756 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction materials industry is a major user of the world’s resources. While enormous progress has been made towards sustainability, the scope and opportunities for improvements are significant. To further the effort for sustainable development, a conference on Sustainable Construction Materials and Technologies was held at Coventry University, Coventry, U.K., from June 11th - 13th, 2007, to highlight case studies and research on new and innovative ways of achieving sustainability of construction materials and technologies. This book presents selected, important contributions made at the conference. Over 190 papers from over 45 countries were accepted for presentation at the conference, of which approximately 100 selected papers are published in this book. The rest of the papers are published in two supplementary books. Topics covered in this book include: sustainable alternatives to natural sand, stone, and Portland cement in concrete; sustainable use of recyclable resources such as fly ash, ground municipal waste slag, pozzolan, rice-husk ash, silica fume, gypsum plasterboard (drywall), and lime in construction; sustainable mortar, concrete, bricks, blocks, and backfill; the economics and environmental impact of sustainable materials and structures; use of construction and demolition wastes, and organic materials (straw bale, hemp, etc.) in construction; sustainable use of soil, timber, and wood products; and related sustainable construction and rehabilitation technologies.
Download or read book Advances in Unsaturated Soils written by Bernardo Caicedo and published by CRC Press. This book was released on 2013-01-17 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: New theories and testing techniques related with Unsaturated Soil Mechanics have proven to be valuable tools to study a broad spectrum of geo-materials which includes rocks, rock fills, frozen soils and domiciliary solid wastes. These new theories and testing techniques have permitted the analysis of several traditional problems from a new perspect
Download or read book Unsaturated Soils Research Applications written by Nasser Khalili and published by CRC Press. This book was released on 2014-06-05 with total page 1850 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unsaturated Soils: Research and Applications contains 247 papers presented at 6th International Conference on Unsaturated Soils (UNSAT2014, Sydney, Australia, 2-4 July 2014). The two volumes provide an overview of recent experimental and theoretical advances in a wide variety of topics related to unsaturated soil mechanics: - Unsaturated Soil Behavior - Experimentation - Modelling - Case Histories - Geotechnical Engineering Problems - Multidisciplinary and New Areas Unsaturated Soils: Research and Applications presents a wealth of information, and is of interest to researchers and practising engineers in soil mechanics and geotechnical engineering. These proceedings are dedicated to Professor Geoffrey E. Blight (1934-2013), who passed in November 2013.
Download or read book The Exploitation of Natural Resources and the Consequences written by R. W. Sarsby and published by Thomas Telford. This book was released on 2001 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the pressure to conserve agricultural land and green-field sites has grown it has become increasingly important to reclaim land that has been damaged by past industrial usage, e.g. areas of mining subsidence, tailings dams and lagoons. Furthermore the need to conserve primary aggregates is providing an impetus for re-use of waste materials in engineered construction.This book is the proceedings of the GREEN3, the third in a four-yearly series of international symposia that discuss aspects of geotechnical engineering intimately related to the environment.
Download or read book The Pressuremeter and Its New Avenues written by Gerard Ballivy and published by CRC Press. This book was released on 1995-01-01 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressuremeter testing activities are of great interest for scientists and engineers concerned with the mechanical behaviour of civil engineering materials. The proceedings include the first Menard Lecture presented by Professor Branko Ladanyi and 57 technical papers from 16 countries. They are related to the application of pressuremeter testing to granular and alluvial soils, clay, rock, concrete and permafrost, and geotechnical design. It also includes a session on technological developments in the design, fabrication and installation of pressuremeters.
Download or read book Research in Progress written by and published by . This book was released on 1982 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical Instrumentation for Monitoring Field Performance written by John Dunnicliff and published by John Wiley & Sons. This book was released on 1993-10-06 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book on the subject written by a practitioner forpractitioners. Geotechnical Instrumentation for Monitoring FieldPerformance Geotechnical Instrumentation for Monitoring FieldPerformance goes far beyond a mere summary of the technicalliterature and manufacturers’ brochures: it guides readersthrough the entire geotechnical instrumentation process, showingthem when to monitor safety and performance, and how to do it well.This comprehensive guide: * Describes the critical steps of planning monitoring programsusing geotechnical instrumentation, including what benefits can beachieved and how construction specifications should bewritten * Describes and evaluates monitoring methods and recommendsinstruments for monitoring groundwater pressure, deformations,total stress in soil, stress change in rock, temperature, and loadand strain in structural members * Offers detailed practical guidelines on instrument calibrations,installation and maintenance, and on the collection, processing,and interpretation of instrumentation data * Describes the role of geotechnical instrumentation during theconstruction and operation phases of civil engineering projects,including braced excavations, embankments on soft ground,embankment dams, excavated and natural slopes, undergroundexcavations, driving piles, and drilled shafts * Provides guidelines throughout the book on the best practices
Download or read book Physical Modelling in Geotechnics written by P. Guo and published by Taylor & Francis. This book was released on 2022-11-22 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers cover topics including: physical modelling facilities; experimental advances; seismic experimental advances; education; soil behaviour; offshore systems; cold regions; geo-environment; dynamics; earthquake effects; and strategies for disaster reduction.
Download or read book Barrier Containment Technologies for Environmental Remediation Applications written by A. Bodocsi and published by Wiley-Interscience. This book was released on 1995-08-31 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive review and evaluation of waste containment technologies presently practiced in remediation applications. Covers the state-of-knowledge, construction and performance of the three main barrier types - vertical (walls), bottom (floors) and surface (caps).
Download or read book Calibration Chamber Testing written by An-Bin Huang and published by . This book was released on 1991 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Highway Research Abstracts written by and published by . This book was released on 1992 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrical Measuring Instruments and Measurements written by S.C. Bhargava and published by CRC Press. This book was released on 2012-12-27 with total page 1888 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, written for the benefit of engineering students and practicing engineers alike, is the culmination of the author's four decades of experience related to the subject of electrical measurements, comprising nearly 30 years of experimental research and more than 15 years of teaching at several engineering institutions. The unique feature of this book, apart from covering the syllabi of various universities, is the style of presentation of all important aspects and features of electrical measurements, with neatly and clearly drawn figures, diagrams and colour and b/w photos that illustrate details of instruments among other things, making the text easy to follow and comprehend. Enhancing the chapters are interspersed explanatory comments and, where necessary, footnotes to help better understanding of the chapter contents. Also, each chapter begins with a "recall" to link the subject matter with the related science or phenomenon and fundamental background. The first few chapters of the book comprise "Units, Dimensions and Standards"; "Electricity, Magnetism and Electromagnetism" and "Network Analysis". These topics form the basics of electrical measurements and provide a better understanding of the main topics discussed in later chapters. The last two chapters represent valuable assets of the book, and relate to (a) "Magnetic Measurements", describing many unique features not easily available elsewhere, a good study of which is essential for the design and development of most electric equipment – from motors to transformers and alternators, and (b) "Measurement of Non-electrical Quantities", dealing extensively with the measuring techniques of a number of variables that constitute an important requirement of engineering measurement practices. The book is supplemented by ten appendices covering various aspects dealing with the art and science of electrical measurement and of relevance to some of the topics in main chapters. Other useful features of the book include an elaborate chapter-by-chapter list of symbols, worked examples, exercises and quiz questions at the end of each chapter, and extensive authors' and subject index. This book will be of interest to all students taking courses in electrical measurements as a part of a B.Tech. in electrical engineering. Professionals in the field of electrical engineering will also find the book of use.
Download or read book Guidelines for Cone Penetration Test written by United States. Federal Highway Administration. Implementation Division and published by . This book was released on 1977 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual presents procedures and guidelines applicable to the use of the cone penetration test. It represents the author's interpretation of the state-of-the-art in Dutch static cone testing as of February 1977. Its contents should provide assistance and uniformity to engineers concerned with the interpretation of the data obtained from such testing. Only geotechnical engineers familiar with the fundamentals of soil mechanics and foundation engineering should use this manual. The manual includes: Introduction and review of the general principals concerning cone penetrometer testing. Individual design chapters which address topics such as: pile design, shear strength estimation, settlement calculation and compaction control; and Appendices which present previously published, pertinent information on cone penetrometer testing.
Download or read book Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering written by The Organizing Committee of the 16th ICSMGE and published by IOS Press. This book was released on 2005-09-12 with total page 3742 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 16th ICSMGE responds to the needs of the engineering and construction community, promoting dialog and exchange between academia and practice in various aspects of soil mechanics and geotechnical engineering. This is reflected in the central theme of the conference 'Geotechnology in Harmony with the Global Environment'. The proceedings of the conference are of great interest for geo-engineers and researchers in soil mechanics and geotechnical engineering. Volume 1 contains 5 plenary session lectures, the Terzaghi Oration, Heritage Lecture, and 3 papers presented in the major project session. Volumes 2, 3, and 4 contain papers with the following topics: Soil mechanics in general; Infrastructure and mobility; Environmental issues of geotechnical engineering; Enhancing natural disaster reduction systems; Professional practice and education. Volume 5 contains the report of practitioner/academic forum, 20 general reports, a summary of the sessions and workshops held during the conference.
Download or read book Slip Casting of Clay Pots for the Manufacture of Optical Glass at the National Bureau of Standards written by United States. Bureau of Standards and published by . This book was released on 1944 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
