Download or read book Rotary Kilns written by Akwasi A. Boateng and published by Butterworth-Heinemann. This book was released on 2015-11-13 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotary Kilns—rotating industrial drying ovens—are used for a wide variety of applications including processing raw minerals and feedstocks as well as heat-treating hazardous wastes. They are particularly critical in the manufacture of Portland cement. Their design and operation is critical to their efficient usage, which if done incorrectly can result in improperly treated materials and excessive, high fuel costs. This professional reference book will be the first comprehensive book in many years that treats all engineering aspects of rotary kilns, including a thorough grounding in the thermal and fluid principles involved in their operation, as well as how to properly design an engineering process that uses rotary kilns. This new edition contains an updated CFD section with inclusion of recent case studies and in line with recent developments covers pyrolysis processes, torrefaction of biomass, application of rotary kilns in C02 capture and information on using rotary kilns as incinerators for hydrocarbons. - Provides essential information on fluid flow, granular flow, mixing and segregation, and aerodynamics during turbulent mixing and recirculation - Gives guidance on which fuels to choose, including options such as natural gas versus coal-fired rotary kilns - Covers principles of combustion and flame control, heat transfer and heating and material balances - New edition contains information on pyrolysis processes with low temperatures and torrefaction of biomass. It also covers calcination of petcoke, how rotary kilns are used as incinerators for chlorinated hydrocarbons. - Includes updated material on CFD simulation of kiln gas and solids flow with a selection of recent case studies.

Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors

Download or read book Cement Production Technology written by Anjan Kumar Chatterjee and published by CRC Press. This book was released on 2018-04-27 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is an outcome of the author’s active professional involvement in research, manufacture and consultancy in the field of cement chemistry and process engineering. This multidisciplinary title on cement production technology covers the entire process spectrum of cement production, starting from extraction and winning of natural raw materials to the finished products including the environmental impacts and research trends. The book has an overtone of practice supported by the back-up principles.

Download or read book Industrial and Process Furnaces written by Barrie Jenkins and published by Butterworth-Heinemann. This book was released on 2013-10-23 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Furnaces sit at the core of all branches of manufacture and industry, so it is vital that these are designed and operated safely and effi-ciently. This reference provides all of the furnace theory needed to ensure that this can be executed successfully on an industrial scale. Industrial and Process Furnaces: Principles, 2nd Edition provides comprehensive coverage of all aspects of furnace operation and design, including topics essential for process engineers and operators to better understand furnaces. This includes: the combustion process and its control, furnace fuels, efficiency, burner design and selection, aerodynamics, heat release profiles, furnace atmosphere, safety and emissions. These elements and more are brought together to illustrate how to achieve optimum design and operation, with real-world case studies to showcase their application. - Up-to-date and comprehensive reference encompassing not only best practice of operation but the essential elements of furnace theory and design, essential to anyone working with furnaces, ovens and combustion-based systems. - More case studies, more worked examples. - New material in this second edition includes further application of Computational Fluid Dynamics (CFD), with additional content on flames and burners, costs, efficiencies and future trends.

Download or read book Incineration Technologies written by Alfons Buekens and published by Springer Science & Business Media. This book was released on 2013-01-04 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste incineration is the art of completely combusting waste, while maintaining or reducing emission levels below current emission standards. Where possible, objectives include the recovering of energy as well as the combustion residues. Successful waste incineration makes it possible to achieve a deep reduction in waste volume, obtain a compact and sterile residue, and eliminate a wide array of pollutants. This book places waste incineration within the wider context of waste management, and demonstrates that, in contrast to landfills and composting, waste incineration can eliminate objectionable and hazardous properties such as flammability and toxicity, result in a significant reduction in volume, and destroy gaseous and liquid waste streams leaving little or no residues beyond those linked to flue gas neutralization and treatment. Moreover, waste incineration sterilizes and destroys putrescible matter, and produces usable heat. Incineration Technologies first appeared as a peer-reviewed contribution to the Encyclopedia of Sustainability Science and Technology. It provides detailed treatment of the challenges of this technically complex process, which requires huge investment and operating costs, as well as good technical skills in maintenance and plant operation. Particular attention is paid to technologies for ensuring the complete burn-out of flue gas and residues and for controlling the resulting pollutants.

Download or read book Industrial Burners Handbook written by Jr., Charles E. Baukal and published by CRC Press. This book was released on 2003-10-29 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid development in the field precipitated by the increased demand for clean burner systems has made the Industrial Burners Handbook into the fields go-to resource. With this resource, bestselling author, editor, and combustion expert Charles Baukal, Jr. has put together a comprehensive reference dedicated to the design and applications of indust

Download or read book Biomass Gasification and Pyrolysis written by Prabir Basu and published by Academic Press. This book was released on 2010-07-19 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers comprehensive coverage of the design, analysis, and operational aspects of biomass gasification, the key technology enabling the production of biofuels from all viable sources--some examples being sugar cane and switchgrass. This versatile resource not only explains the basic principles of energy conversion systems, but also provides valuable insight into the design of biomass gasifiers. The author provides many worked out design problems, step-by-step design procedures and real data on commercially operating systems. After fossil fuels, biomass is the most widely used fuel in the world. Biomass resources show a considerable potential in the long term if residues are properly handled and dedicated energy crops are grown. Includes step-by-step design procedures and case studies for Biomass GasificationProvides worked process flow diagrams for gasifier design. Covers integration with other technologies (e.g. gas turbine, engine, fuel cells)

Download or read book PbZn 2020 9th International Symposium on Lead and Zinc Processing written by A. Siegmund and published by Springer Nature. This book was released on 2020-01-24 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: Established in 1970, the PbZn symposium series is considered the leading international technical forum for the lead and zinc processing industries. The PbZn 2020 volume addresses all aspects of current processing technologies for primary and secondary lead and zinc, as well as emerging technologies for both metals.

Download or read book Waste Management for the Food Industries written by Ioannis S. Arvanitoyannis and published by Academic Press. This book was released on 2010-07-28 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continuously increasing human population, has resulted in a huge demand for processed and packaged foods. As a result of this demand, large amounts of water, air, electricity and fuel are consumed on a daily basis for food processing, transportation and preservation purposes. Although not one of the most heavily polluting, the food industry does contribute to the increase in volume of waste produced as well as to the energy expended to do so. For the first time, nine separate food industry categories are thoroughly investigated in Waste Management for the Food Industries in an effort to help combat this already acute problem. The current state of environmental management systems is described, offering comparisons of global legislation rarely found in other resources. An extensive review of commercial equipment, including advantages and disadvantages per employed waste management technique, offers a unique perspective for any academic, student, professional, and/or consultant in the food, agriculture and environmental industries. - Thoroughly examines the most prevalent and most polluting industries such as Meat, Fish, Dairy, Olive Oil, Juice and Wine industries - Includes synoptical tables [methods employed, physicochemical or microbiological parameters altered after treatment etc] and comparative figures of the effectiveness of various waste management methods - Contains nearly 2500 of the most up-to-date references available

Download or read book Industrial Boilers and Heat Recovery Steam Generators written by V. Ganapathy and published by CRC Press. This book was released on 2002-10-16 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filled with over 225 boiler/HRSG operation and design problems, this book covers steam generators and related systems used in process plants, refineries, chemical plants, electrical utilities, and other industrial settings. Emphasizing the thermal engineering aspects, the author provides information on the design and performance of steam generators

Download or read book Chemical Recovery in the Alkaline Pulping Processes written by Gerald Hough and published by Tappi. This book was released on 1985 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Metallurgy written by S Seetharaman and published by Elsevier. This book was released on 2005-10-10 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: As product specifications become more demanding, manufacturers require steel with ever more specific functional properties. As a result, there has been a wealth of research on how those properties emerge during steelmaking. Fundamentals of metallurgy summarises this research and its implications for manufacturers.The first part of the book reviews the effects of processing on the properties of metals with a range of chapters on such phenomena as phase transformations, types of kinetic reaction, transport and interfacial phenomena. Authors discuss how these processes and the resulting properties of metals can be modelled and predicted. Part two discusses the implications of this research for improving steelmaking and steel properties.With its distinguished editor and international team of contributors, Fundamentals of metallurgy is an invaluable reference for steelmakers and manufacturers requiring high-performance steels in such areas as automotive and aerospace engineering. It will also be useful for those dealing with non-ferrous metals and alloys, material designers for functional materials, environmentalists and above all, high technology industries designing processes towards materials with tailored properties. - Summarises key research and its implications for manufacturers - Essential reading for steelmakers and manufacturers - Written by leading experts from both industry and academia

Download or read book A Dictionary of Chemical Engineering written by Carl Schaschke and published by OUP Oxford. This book was released on 2014-01-09 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Dictionary of Chemical Engineering is one of the latest additions to the market leading Oxford Paperback Reference series. In over 3,400 concise and authoritative A to Z entries, it provides definitions and explanations for chemical engineering terms in areas including: materials, energy balances, reactions, separations, sustainability, safety, and ethics. Naturally, the dictionary also covers many pertinent terms from the fields of chemistry, physics, biology, and mathematics. Useful entry-level web links are listed and regularly updated on a dedicated companion website to expand the coverage of the dictionary. Comprehensively cross-referenced and complemented by over 60 line drawings, this excellent new volume is the most authoritative dictionary of its kind. It is an essential reference source for students of chemical engineering, for professionals in this field (as well as related disciplines such as applied chemistry, chemical technology, and process engineering), and for anyone with an interest in the subject.

Download or read book Materials Chemistry written by Bradley D. Fahlman and published by Springer. This book was released on 2018-08-28 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of this successful textbook continues to build on the strengths that were recognized by a 2008 Textbook Excellence Award from the Text and Academic Authors Association (TAA). Materials Chemistry addresses inorganic-, organic-, and nano-based materials from a structure vs. property treatment, providing a suitable breadth and depth coverage of the rapidly evolving materials field — in a concise format. The 3rd edition offers significant updates throughout, with expanded sections on sustainability, energy storage, metal-organic frameworks, solid electrolytes, solvothermal/microwave syntheses, integrated circuits, and nanotoxicity. Most appropriate for Junior/Senior undergraduate students, as well as first-year graduate students in chemistry, physics, or engineering fields, Materials Chemistry may also serve as a valuable reference to industrial researchers. Each chapter concludes with a section that describes important materials applications, and an updated list of thought-provoking questions.

Download or read book Thermochemical Processing of Biomass written by Robert C. Brown and published by John Wiley & Sons. This book was released on 2019-05-28 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive examination of the large number of possible pathways for converting biomass into fuels and power through thermochemical processes Bringing together a widely scattered body of information into a single volume, this book provides complete coverage of the many ways that thermochemical processes are used to transform biomass into fuels, chemicals and power. Fully revised and updated, this new edition highlights the substantial progress and recent developments that have been made in this rapidly growing field since publication of the first edition and incorporates up-to-date information in each chapter. Thermochemical Processing of Biomass: Conversion into Fuels, Chemicals and Power, 2nd Edition incorporates two new chapters covering: condensed phased reactions of thermal deconstruction of biomass and life cycle analysis of thermochemical processing systems. It offers a new introductory chapter that provides a more comprehensive overview of thermochemical technologies. The book also features fresh perspectives from new authors covering such evolving areas as solvent liquefaction and hybrid processing. Other chapters cover combustion, gasification, fast pyrolysis, upgrading of syngas and bio-oil to liquid transportation fuels, and the economics of thermochemically producing fuels and power, and more. Features contributions by a distinguished group of European and American researchers offering a broad and unified description of thermochemical processing options for biomass Combines an overview of the current status of thermochemical biomass conversion as well as engineering aspects to appeal to the broadest audience Edited by one of Biofuels Digest’s "Top 100 People" in bioenergy for six consecutive years Thermochemical Processing of Biomass: Conversion into Fuels, Chemicals and Power, 2nd Edition will appeal to all academic researchers, process chemists, and engineers working in the field of biomass conversion to fuels and chemicals. It is also an excellent book for graduate and advanced undergraduate students studying biomass, biofuels, renewable resources, and energy and power generation.

Download or read book Kiln Drying of Lumber written by R.B. Keey and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: At present, no single book adequately covers a basic understanding of wood book satisfies the need for such a work. It describes drying in practice. This the fundamental basis of kiln-drying technology, to enable forest companies to imFrove their drying operations as high-quality timbers become scarcer and of yesteryear can no longer be tolerated. Adaptive the wasteful practices is no longer good enough. Innovations change based on past experience of the material being dried and the processes require a sound understanding of drying. Newer techniques, such as the use of ultrahigh temperature sea soning and superheated steam under vacuum, require an even greater depth of physical understanding for these methods to be used effectively and economically. book provides a description of modern ideas about wood structure, This moisture movement and stress development, from which models of the drying process are developed to give the kiln operator important information about the course of drying under specified conditions, and thus a means is compared with practice wherever for rational process improvement. Theory possible.

Download or read book Cement Plant Operations Handbook written by Philip A. Alsop and published by Tradeship Publications Ltd. This book was released on 2007 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: