EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book 50 MW X band Klystron Sources for the Next Generation of Linear Colliders

Download or read book 50 MW X band Klystron Sources for the Next Generation of Linear Colliders written by and published by . This book was released on 1994 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first in a new series of high-power pulsed klystrons has been tested with the following results: Frequency = 11.4 GHz, beam voltage = 415 kV, power output = 51 MW, pulse length = 1.5 [mu]s, and efficiency = 37%. Several tubes of this type will be used in the Next Linear Collider Test Accelerator (NLCTA) at SLAC. The rf performance of the klystron, which employs a standing-wave extended-interaction output circuit, is closely approximated by simulations performed with the SLAC CONDOR code. The same code predicts considerably higher efficiency, using a traveling-wave output circuit. A klystron with such a circuit will be constructed in the future. Another klystron is also planned in which beam confinement is accomplished by a periodic permanent magnet (PPM) stack, for which simulations also predict good performance.

Book Design of a 50 MW Klystron at X band

Download or read book Design of a 50 MW Klystron at X band written by and published by . This book was released on 1995 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper describes the design and performance of the XL-1 klystron; a 50 MW klystron operating at a frequency of 11.424 GHz for use on the SLAC Next Linear Collider Test Accelerator (NLCTA). Problems associated with the development of high-power rf sources for NLC, and the solutions implemented on XL-1 are discussed.

Book European Particle Accelerator Conference  Epac 94   In 3 Volumes

Download or read book European Particle Accelerator Conference Epac 94 In 3 Volumes written by Christine Petit-jean-genaz and published by World Scientific. This book was released on 1994-11-26 with total page 2968 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings aim to provide a comprehensive overview of research, technology and applications in the field of accelerators. Contributions from the entire field of accelerators are presented, including low and high energy machines, and medical and industrial accelerators.

Book High Energy Accelerators  Heacc 92    Proceedings Of The Xv International Conference  In 2 Volumes

Download or read book High Energy Accelerators Heacc 92 Proceedings Of The Xv International Conference In 2 Volumes written by J Rossbach and published by World Scientific. This book was released on 1993-02-10 with total page 1288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The High Energy Accelerator Conference has always been the monitor of the state of the art and the new trends in planning, construction and operation of large particle accelerators. It is held every three years. The 1992 conference is devoted to High Energy Hadron Accelerators and Colliders, Linear Colliders, e⁺e⁻ Storage Rings and related Technologies for these machines. In addition to status reports and contributed papers, the program features twelve survey talks which include summaries of individual poster papers.

Book Energy Research Abstracts

Download or read book Energy Research Abstracts written by and published by . This book was released on 1994 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book SLAC RF Source Research at X Band

Download or read book SLAC RF Source Research at X Band written by and published by . This book was released on 2003 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-band klystrons capable of 75 MW and utilizing either solenoidal or Periodic Permanent Magnet (PPM) focusing are undergoing design, fabrication and testing at the Stanford Linear Accelerator Center (SLAC). The klystron development is part of an effort to realize components necessary for the construction of the Next Linear Collider (NLC). SLAC has developed a solenoidal-focused X-band klystron which is currently the workhorse of high power component testing for the NLC. A state-of-the-art modulator will drive eight of these tubes which, in turn, will power an rf distribution system referred to as the ''8-pack'' in order to test these modulators and waveguide components. Eventually, in an interest to save millions of dollars per year in the operational cost of the NLC, these tubes will be replaced by PPM klystrons. The PPM devices built to date which fit this class of operation consist of a variety of 50 MW and 75 MW devices constructed by SLAC, KEK (Tsukuba, Japan), and industry. These tubes follow from the successful 50 MW PPM design of 1996. Recent testing of this particular tube at wider pulsewidths has reached 50 MW at 55% efficiency, 2.4 [mu]s and 60 Hz. Two 50 MW PPM klystrons produced by industry have been delivered to SLAC. One of these devices arrived with a vacuum suitable for test. Testing during 2001 revealed a serious, but curious, vacuum response which limited the operation to an rf output of ≈40 MW. A 75 MW PPM klystron prototype was first constructed in 1997 and later modified in 1999 to eliminate oscillations. This tube has reached the NLC design target of 75 MW at 1.5 [mu]s though at a significantly reduced rep rate. Two new 75 MW PPM klystrons were constructed and tested in 2002 after a diode was successfully tested in 2001. The new design was aimed at reducing the cost and increasing the reliability of such high-energy devices. The rf circuit and beam focusing for one of these devices was built by industry and incorporated into one of the tubes. Both of these latest devices suffered from a variety of issues concerning gun stability, beam confinement and rf stability. A rebuilt version of this latest design was constructed in early 2003 and completed testing in June. The performance of these various klystrons, particularly during 2002 and 2003, will be presented along with results of studies pertinent to their construction. Design and manufacturing issues of the various klystrons are discussed, along with plans for future modifications and areas of research.

Book X band Klystrons as a Power Source of the Next Linear Collider

Download or read book X band Klystrons as a Power Source of the Next Linear Collider written by Hajime Mizuno and published by . This book was released on 1994 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book X Band Klystron Development at the Stanford Linear Accelerator Center

Download or read book X Band Klystron Development at the Stanford Linear Accelerator Center written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: X-band klystrons capable of 75 MW and utilizing either solenoidal or Periodic Permanent Magnet (PPM) focusing are undergoing design, fabrication and testing at the Stanford Linear Accelerator Center (SLAC). The klystron development is part of an effort to realize components necessary for the construction of the Next Linear Collider (NLC). SLAC has completed a solenoidal-focused X-band klystron development effort to study the design and operation of tubes with beam microperveances of 1.2. As of early 2000, nine 1.2[micro]K klystrons have been tested to 50 MW at 1.5[micro]s. The first 50 MW PPM klystron, constructed in 1996, was designed with a 0.6[micro]K beam at 465 kV and uses a 5-cell traveling-wave output structure. Recent testing of this tube at wider pulsewidths has reached 50 MW at 55% efficiency, 2.4[micro]s and 60 Hz. A 75 MW PPM klystron prototype was constructed in 1998 and has reached the NLC design target of 75 MW at 1.5[micro]s. A new 75 MW PPM klystron design, which is aimed at reducing the cost and increasing the reliability of multi-megawatt PPM klystrons, is under investigation. The tube is scheduled for testing during early 2001.

Book High Energy Density and High Power RF

Download or read book High Energy Density and High Power RF written by David K. Abe and published by Springer Science & Business Media. This book was released on 2006-01-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the seventh in a series of international workshops on high-power and high-energy density microwave devices for accelerator, plasma physics, and defense applications. The scope of this workshop included accelerators for high energy physics, plasma heating and current drive in controlled thermonuclear fusion research, radar and directed energy/high power microwave systems, THz sources and technologies, and advanced 2D/3D computational tool development.

Book Pulsed RF Sources for Linear Colliders

Download or read book Pulsed RF Sources for Linear Colliders written by Richard Clinton Fernow and published by . This book was released on 1995 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book EPAC 92

    Book Details:
  • Author : H. Henke
  • Publisher : Atlantica Séguier Frontières
  • Release : 1992
  • ISBN : 9782863321140
  • Pages : 910 pages

Download or read book EPAC 92 written by H. Henke and published by Atlantica Séguier Frontières. This book was released on 1992 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Current Status of the Next Linear Collider X Band Klystron Development Program

Download or read book Current Status of the Next Linear Collider X Band Klystron Development Program written by C. Pearson and published by . This book was released on 2005 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: Klystrons capable of driving accelerator sections in the Next Linear Collider (NLC) have been developed at SLAC during the last decade. In addition to fourteen 50 MW solenoid-focused devices and a 50 MW Periodic Permanent Magnet focused (PPM) klystron, a 500 kV 75 MW PPM klystron was tested in 1999 to 80 MW with 3 {micro}s pulses, but very low duty. Subsequent 75 MW prototypes aimed for low-cost manufacture by employing reusable focusing structures external to the vacuum, similar to a solenoid electromagnet. During the PPM klystron development, several partners (CPI, EEV and Toshiba) have participated by constructing partial or complete PPM klystrons. After early failures during testing of the first two devices, SLAC has recently tested this design (XP3-3) to the full NLC specifications of 75 MW, 1.6 {micro}s pulse length, and 120 Hz. This 14.4 kW average power operation came with an efficiency of 50%. The XP3-3 average and peak output power, together with the focusing method, arguably makes it the most advanced high power klystron ever built anywhere in the world. Design considerations and test results for these latest prototypes will be presented.

Book X BAND KLYSTRON DEVELOPMENT AT SLAC

Download or read book X BAND KLYSTRON DEVELOPMENT AT SLAC written by and published by . This book was released on 2009 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of X-band klystrons at SLAC originated with the idea of building an X-band Linear Collider in the late 1980's. Since then much effort has been expended in developing a reliable X-band Power source capable of delivering>50 MW RF power in pulse widths>1.5 [mu]s. I will report on some of the technical issues and design strategies which have led to the current SLAC klystron designs.

Book PPM Focused X band Klystron Development at the Stanford Linear Accelerator Center

Download or read book PPM Focused X band Klystron Development at the Stanford Linear Accelerator Center written by and published by . This book was released on 1996 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-band klystrons capable of 50 MW and utilizing Periodic Permanent Magnet (PPM) focusing are undergoing design and fabrication at the Stanford Linear Accelerator Center (SLAC). The klystron development is part of an effort to realize components necessary for the construction of the Next Linear Collider (NLC). The first klystron to be tested this year has a 0.6 microK beam at 465 kV, a 5 cells traveling wave output structure and a predicted efficiency of 63%. A 465 kV, 190 A beam stick with 12 periods of PPM focusing has recently operated to verify the gun optics and transmission of the beam in the absence of rf bunching. Beam transmission greater than 99.8% has been measured. Design and simulation of the beam stick and klystron are discussed, along with performance of the beam stick under confined flow and shielded conditions.

Book Development of C band 50 MW Pulse Klystron for E e  Linear Collider

Download or read book Development of C band 50 MW Pulse Klystron for E e Linear Collider written by T. Shintake and published by . This book was released on 1997 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Periodic Permanent Magnet Development for Linear Collider X band Klystrons

Download or read book Periodic Permanent Magnet Development for Linear Collider X band Klystrons written by and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Stanford Linear Accelerator Center (SLAC) klystron group is currently designing, fabricating and testing 11.424 GHz klystrons with peak output powers from 50 to 75 MW at 1 to 2[micro]s rf pulsewidths as part of an effort to realize components necessary for the construction of the Next Linear Collider (NLC). In order to eliminate the projected operational-year energy bill for klystron solenoids, Periodic Permanent Magnet (PPM) focusing has been employed on the latest X-band klystron designs. A PPM beam tester has operated at the same repetition rate, voltage and average beam power required for a 75 MW NLC klystron. Prototype 50 and 75 MW PPM klystrons were built and tested during 1996 and 1997 which operate from 50 to 70 MW at efficiencies greater than 55%. Construction and testing of 75 MW research klystrons will continue while the design and reliability is perfected. This paper discusses the design of these PPM klystrons and the results of testing to date along with future plans for the development of a low-cost Design for Manufacture (DFM) 75 MW klystron and invitation for industry participation.

Book INIS Atomindex

Download or read book INIS Atomindex written by and published by . This book was released on 1995 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: