Download or read book Proceedings of International Conference of Aerospace and Mechanical Engineering 2019 written by Parvathy Rajendran and published by Springer Nature. This book was released on 2020-06-12 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the International Conference of Aerospace and Mechanical Engineering 2019 (AeroMech 2019), held at the Universiti Sains Malaysia's School of Aerospace Engineering. Sharing new innovations and discoveries concerning the Fourth Industrial Revolution (4IR), with a focus on 3D printing, big data analytics, Internet of Things, advanced human-machine interfaces, smart sensors and location detection technologies, it will appeal to mechanical and aerospace engineers.

Download or read book Recapturing a Future for Space Exploration written by National Research Council and published by National Academies Press. This book was released on 2012-01-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than four decades have passed since a human first set foot on the Moon. Great strides have been made in our understanding of what is required to support an enduring human presence in space, as evidenced by progressively more advanced orbiting human outposts, culminating in the current International Space Station (ISS). However, of the more than 500 humans who have so far ventured into space, most have gone only as far as near-Earth orbit, and none have traveled beyond the orbit of the Moon. Achieving humans' further progress into the solar system had proved far more difficult than imagined in the heady days of the Apollo missions, but the potential rewards remain substantial. During its more than 50-year history, NASA's success in human space exploration has depended on the agency's ability to effectively address a wide range of biomedical, engineering, physical science, and related obstacles-an achievement made possible by NASA's strong and productive commitments to life and physical sciences research for human space exploration, and by its use of human space exploration infrastructures for scientific discovery. The Committee for the Decadal Survey of Biological and Physical Sciences acknowledges the many achievements of NASA, which are all the more remarkable given budgetary challenges and changing directions within the agency. In the past decade, however, a consequence of those challenges has been a life and physical sciences research program that was dramatically reduced in both scale and scope, with the result that the agency is poorly positioned to take full advantage of the scientific opportunities offered by the now fully equipped and staffed ISS laboratory, or to effectively pursue the scientific research needed to support the development of advanced human exploration capabilities. Although its review has left it deeply concerned about the current state of NASA's life and physical sciences research, the Committee for the Decadal Survey on Biological and Physical Sciences in Space is nevertheless convinced that a focused science and engineering program can achieve successes that will bring the space community, the U.S. public, and policymakers to an understanding that we are ready for the next significant phase of human space exploration. The goal of this report is to lay out steps and develop a forward-looking portfolio of research that will provide the basis for recapturing the excitement and value of human spaceflight-thereby enabling the U.S. space program to deliver on new exploration initiatives that serve the nation, excite the public, and place the United States again at the forefront of space exploration for the global good.

Download or read book Aeronautics and Astronautics written by Max Mulder and published by BoD – Books on Demand. This book was released on 2011-09-12 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: In its first centennial, aerospace has matured from a pioneering activity to an indispensable enabler of our daily life activities. In the next twenty to thirty years, aerospace will face a tremendous challenge - the development of flying objects that do not depend on fossil fuels. The twenty-three chapters in this book capture some of the new technologies and methods that are currently being developed to enable sustainable air transport and space flight. It clearly illustrates the multi-disciplinary character of aerospace engineering, and the fact that the challenges of air transportation and space missions continue to call for the most innovative solutions and daring concepts.

Download or read book 29th International Symposium on Shock Waves 1 written by Riccardo Bonazza and published by Springer. This book was released on 2015-07-09 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings present the results of the 29th International Symposium on Shock Waves (ISSW29) which was held in Madison, Wisconsin, U.S.A., from July 14 to July 19, 2013. It was organized by the Wisconsin Shock Tube Laboratory, which is part of the College of Engineering of the University of Wisconsin-Madison. The ISSW29 focused on the following areas: Blast Waves, Chemically Reactive Flows, Detonation and Combustion, Facilities, Flow Visualization, Hypersonic Flow, Ignition, Impact and Compaction, Industrial Applications, Magnetohydrodynamics, Medical and Biological Applications, Nozzle Flow, Numerical Methods, Plasmas, Propulsion, Richtmyer-Meshkov Instability, Shock-Boundary Layer Interaction, Shock Propagation and Reflection, Shock Vortex Interaction, Shock Waves in Condensed Matter, Shock Waves in Multiphase Flow, as well as Shock Waves in Rarefield Flow. The two Volumes contain the papers presented at the symposium and serve as a reference for the participants of the ISSW 29 and individuals interested in these fields.

Download or read book Conceptual Shape Optimization of Entry Vehicles written by Dominic Dirkx and published by Springer. This book was released on 2016-12-09 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the parameterization of entry capsules, including Apollo capsules and planetary probes, and winged entry vehicles such as the Space Shuttle and lifting bodies. The aerodynamic modelling is based on a variety of panel methods that take shadowing into account, and it has been validated with flight and wind tunnel data of Apollo and the Space Shuttle. The shape optimization is combined with constrained trajectory analysis, and the multi-objective approach provides the engineer with a Pareto front of optimal shapes. The method detailed in Conceptual Shape Optimization of Entry Vehicles is straightforward, and the output gives the engineer insight in the effect of shape variations on trajectory performance. All applied models and algorithms used are explained in detail, allowing for reconstructing the design tool to the researcher’s requirements. Conceptual Shape Optimization of Entry Vehicles will be of interest to both researchers and graduate students in the field of aerospace engineering, and to practitioners within the aerospace industry.

Download or read book Encyclopedia of Plasma Technology Two Volume Set written by J. Leon Shohet and published by CRC Press. This book was released on 2016-12-12 with total page 1654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical plasmas have a wide range of industrial applications. The Encyclopedia of Plasma Technology covers all aspects of plasma technology from the fundamentals to a range of applications across a large number of industries and disciplines. Topics covered include nanotechnology, solar cell technology, biomedical and clinical applications, electronic materials, sustainability, and clean technologies. The book bridges materials science, industrial chemistry, physics, and engineering, making it a must have for researchers in industry and academia, as well as those working on application-oriented plasma technologies. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Download or read book Advanced UAV Aerodynamics Flight Stability and Control written by Pascual Marqués and published by John Wiley & Sons. This book was released on 2017-04-27 with total page 1180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensively covers emerging aerospace technologies Advanced UAV aerodynamics, flight stability and control: Novel concepts, theory and applications presents emerging aerospace technologies in the rapidly growing field of unmanned aircraft engineering. Leading scientists, researchers and inventors describe the findings and innovations accomplished in current research programs and industry applications throughout the world. Topics included cover a wide range of new aerodynamics concepts and their applications for real world fixed-wing (airplanes), rotary wing (helicopter) and quad-rotor aircraft. The book begins with two introductory chapters that address fundamental principles of aerodynamics and flight stability and form a knowledge base for the student of Aerospace Engineering. The book then covers aerodynamics of fixed wing, rotary wing and hybrid unmanned aircraft, before introducing aspects of aircraft flight stability and control. Key features: Sound technical level and inclusion of high-quality experimental and numerical data. Direct application of the aerodynamic technologies and flight stability and control principles described in the book in the development of real-world novel unmanned aircraft concepts. Written by world-class academics, engineers, researchers and inventors from prestigious institutions and industry. The book provides up-to-date information in the field of Aerospace Engineering for university students and lecturers, aerodynamics researchers, aerospace engineers, aircraft designers and manufacturers.

Download or read book Intelligent and Fuzzy Systems written by Cengiz Kahraman and published by Springer Nature. This book was released on 2022-07-04 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent research in intelligent and fuzzy techniques on digital transformation and the new normal, the state to which economies, societies, etc. settle following a crisis bringing us to a new environment. Digital transformation and the new normal-appearing in many areas such as digital economy, digital finance, digital government, digital health, and digital education are the main scope of this book. The readers can benefit from this book for preparing for a digital “new normal” and maintaining a leadership position among competitors in both manufacturing and service companies. Digitizing an industrial company is a challenging process, which involves rethinking established structures, processes, and steering mechanisms presented in this book. The intended readers are intelligent and fuzzy systems researchers, lecturers, M.Sc., and Ph.D. students studying digital transformation and new normal. The book covers fuzzy logic theory and applications, heuristics, and metaheuristics from optimization to machine learning, from quality management to risk management, making the book an excellent source for researchers.

Download or read book Modular Systems for Energy Usage Management written by Yatish T. Shah and published by CRC Press. This book was released on 2020-01-22 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: "...[a] very unique book that integrates benefits of modular systems for enhanced sustainability to meet the global challenges of rapid and sometimes uncontrolled industrialization in the 21st century."—Pinakin Patel, T2M Global This book examines the role of the modular approach for the back end of the energy industry—energy usage management. It outlines the use of modular approaches for the processes used to improve energy conservation and efficiency, which are preludes to the prudent use of energy. Since energy consumption is conventionally broken down into four sectors—residential, transportation, industrial, and commercial—the discussions on energy usage management are also broken down into these four sectors in the book. The book examines the use of modular systems for five application areas that cover the sectors described above: buildings, vehicles, computers and electrical/electronic products, district heating, and wastewater treatment and desalination. This book also discusses the use of a modular approach for energy storage and transportation. Finally, it describes how the modular approach facilitates bottom-up, top-down, and hybrid simulation and modeling of the energy systems from various scientific and socioeconomic perspectives. Aimed at industry professionals and researchers involved in the energy industry, this book illustrates in detail, with the help of concrete industrial examples, how a modular approach can facilitate management of energy usage.

Download or read book Multiphysics Simulations in Automotive and Aerospace Applications written by Mojtaba Moatamedi and published by Academic Press. This book was released on 2021-07-20 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphysics Simulations in Automotive and Aerospace Applications provides the fundamentals and latest developments on numerical methods for solving multiphysics problems, including fluid-solid interaction, fluid-structure-thermal coupling, electromagnetic-fluid-solid coupling, vibro and aeroacoustics. Chapters describe the different algorithms and numerical methods used for solving coupled problems using implicit or explicit coupling problems from industrial or academic applications. Given the book's comprehensive coverage, automotive and aerospace engineers, designers, graduate students and researchers involved in the simulation of practical coupling problems will find the book useful in its approach. - Provides the fundamentals of numerical methods, along with comprehensive examples for solving coupled problems - Features multi-physics methods and available codes, along with what those codes can do - Presents examples from industrial and academic applications

Download or read book Computational Flight Testing written by Norbert Kroll and published by Springer Science & Business Media. This book was released on 2013-06-18 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the German research initiative ComFliTe (Computational Flight Testing), the main goal of which was to enhance the capabilities of and tools for numerical simulation in flight physics to support future aircraft design and development. The initiative was coordinated by the German Aerospace Center (DLR) and promoted collaboration between the aircraft industry and academia. Activities focused on improving physical modeling for separated flows, developing advanced numerical algorithms for series computations and sensitivity predictions, as well as surrogate and reduced order modeling for aero data production and developing robust fluid-, structure- and flight mechanics coupling procedures. Further topics included more efficient handling of aircraft control surfaces and improving simulation methods for maneuvers, such as gust encounter. The important results of this three-year initiative were presented during the ComFliTe closing symposium, which took place at the DLR in Braunschweig, Germany, on 11-12 June 2012. Computational Flight Testing addresses both students and researchers in the areas of mathematics, numerical simulation and optimization methods, as well as professionals in aircraft design working at the forefront of their field.

Download or read book Modern Flexible Multi Body Dynamics Modeling Methodology for Flapping Wing Vehicles written by Cornelia Altenbuchner and published by Academic Press. This book was released on 2017-09-15 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Flexible Multi-Body Dynamics Modeling Methodology for Flapping Wing Vehicles presents research on the implementation of a flexible multi-body dynamic representation of a flapping wing ornithopter that considers aero-elasticity. This effort brings advances in the understanding of flapping wing flight physics and dynamics that ultimately leads to an improvement in the performance of such flight vehicles, thus reaching their high performance potential. In using this model, it is necessary to reduce body accelerations and forces of an ornithopter vehicle, as well as to improve the aerodynamic performance and enhance flight kinematics and forces which are the design optimization objectives. This book is a useful reference for postgraduates in mechanical engineering and related areas, as well as researchers in the field of multibody dynamics. - Uses Lagrange equations of motion in terms of a generalized coordinate vector of the rigid and flexible bodies in order to model the flexible multi-body system - Provides flight verification data and flight physics of highly flexible ornithoptic vehicles - Includes an online companion site with files/codes used in application examples

Download or read book New Results in Numerical and Experimental Fluid Mechanics XIII written by Andreas Dillmann and published by Springer Nature. This book was released on 2021-07-13 with total page 787 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers timely insights into research on numerical and experimental fluid mechanics and aerodynamics, mainly for (but not limited to) aerospace applications. It reports on findings by members of the STAB (German Aerospace Aerodynamics Association) and DGLR (German Society for Aeronautics and Astronautics) and covers both nationally and EC-funded projects. Continuing on the tradition of the previous volumes, the book highlights innovative solutions, promoting translation from fundamental research to industrial applications. It addresses academics and professionals in the field of aeronautics, astronautics, ground transportation, and energy alike.

Download or read book An Introduction to Element Based Galerkin Methods on Tensor Product Bases written by Francis X. Giraldo and published by Springer Nature. This book was released on 2020-10-30 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the reader to solving partial differential equations (PDEs) numerically using element-based Galerkin methods. Although it draws on a solid theoretical foundation (e.g. the theory of interpolation, numerical integration, and function spaces), the book’s main focus is on how to build the method, what the resulting matrices look like, and how to write algorithms for coding Galerkin methods. In addition, the spotlight is on tensor-product bases, which means that only line elements (in one dimension), quadrilateral elements (in two dimensions), and cubes (in three dimensions) are considered. The types of Galerkin methods covered are: continuous Galerkin methods (i.e., finite/spectral elements), discontinuous Galerkin methods, and hybridized discontinuous Galerkin methods using both nodal and modal basis functions. In addition, examples are included (which can also serve as student projects) for solving hyperbolic and elliptic partial differential equations, including both scalar PDEs and systems of equations.

Download or read book Transdisciplinary Lifecycle Analysis of Systems written by R. Curran and published by IOS Press. This book was released on 2015-07-15 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concurrent Engineering (CE) is based on the premise that different phases of a product’s lifecycle should be conducted concurrently and initiated as early as possible within the Product Creation Process (PCP). It has become the substantive basic methodology in many industries, including automotive, aerospace, machinery, shipbuilding, consumer goods, process industry and environmental engineering. CE aims to increase the efficiency of the PCP and reduce errors in later phases while incorporating considerations for full lifecycle and through-life operations. This book presents the proceedings of the 22nd ISPE Inc. (International Society for Productivity Enhancement) International Conference on Concurrent Engineering (CE2015) entitled ‘Transdisciplinary Lifecycle Analysis of Systems’, and held in Delft, the Netherlands, in July 2015. It is the second in the series ‘Advances in Transdisciplinary Engineering’. The book includes 63 peer reviewed papers and 2 keynote speeches arranged in 10 sections: keynote speeches; systems engineering; customization and variability management; production oriented design, maintenance and repair; design methods and knowledge-based engineering; multidisciplinary product management; sustainable product development; service oriented design; product lifecycle management; and trends in CE. Containing papers ranging from the theoretical and conceptual to the highly pragmatic, this book will be of interest to all engineering professionals and practitioners; researchers, designers and educators.

Download or read book Trends in Intelligent Robotics written by Prahlad Vadakkepat and published by Springer Science & Business Media. This book was released on 2010-09-01 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: th This volume contains the papers selected for the 13 FIRA Robot World Congress, held at Amrita Vishwa Vidyapeetham Bangalore, India, September 15-17, 2010. The Federation of International Robot-soccer Association (FIRA – www.fira.net) is a non-profit organization that annually organizes robotic competitions and meetings around the globe. The robot soccer competitions started in 1996, and FIRA was est- lished on, June 5, 1997. The robot soccer competitions are aimed at promoting the spirit of science and technology to the younger generation. The congress is a forum to share ideas and future directions of technologies, and to enlarge the human networks in the robotics area. The objectives of the FIRA Cup and Congress are to explore the technical dev- opments and achievements in the field of robotics, and provide participants with a robot festival including technical presentations, robot soccer competitions, and exh- its under the theme “Where Theory and Practice Meet.” FIRA India aims to propagate and popularize robotics and robotic competitions across India.

Download or read book Real World Applications of Genetic Algorithms written by Olympia Roeva and published by BoD – Books on Demand. This book was released on 2012-03-07 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book addresses some of the most recent issues, with the theoretical and methodological aspects, of evolutionary multi-objective optimization problems and the various design challenges using different hybrid intelligent approaches. Multi-objective optimization has been available for about two decades, and its application in real-world problems is continuously increasing. Furthermore, many applications function more effectively using a hybrid systems approach. The book presents hybrid techniques based on Artificial Neural Network, Fuzzy Sets, Automata Theory, other metaheuristic or classical algorithms, etc. The book examines various examples of algorithms in different real-world application domains as graph growing problem, speech synthesis, traveling salesman problem, scheduling problems, antenna design, genes design, modeling of chemical and biochemical processes etc.