Download or read book Graphene written by Hongwei Zhu and published by Academic Press. This book was released on 2017-09-01 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene: Fabrication, Characterizations, Properties and Applications presents a comprehensive review of the current status of graphene, especially focused on synthesis, fundamental properties and future applications, aiming to giving a comprehensive reference for scientists, researchers and graduate students from various sectors. Graphene, a single atomic layer of carbon hexagons, has stimulated a lot of research interest owing to its unique structure and fascinating properties. The book is devoted to understanding graphene fundamentally yet comprehensively through a wide range of issues in the areas of materials science, chemistry, physics, electronics and biology. The book is an important resource of comprehensive knowledge pertinent to graphene and to related expanding areas. This valuable book will attract scientists, researchers and graduate students in physics and chemistry because it aims at providing all common knowledge of these communities including essential aspects of material synthesis and characterization, fundamental physical properties and detailed chapters focused on the most promising applications. Presents a comprehensive and up-to-date review of current research of graphene, especially focused on synthesis, fundamental properties and future applications Includes not only fundamental knowledge of graphene materials, but also an overview of special properties for different potential applications of graphene in the fields of solar cells, photodetectors, energy storage, composites, environmental materials and bio-materials Emphasizes graphene-based applications that are quickly emerging as potential building blocks for nanotechnological commercial applications
Download or read book 3D Graphene written by Ram K. Gupta and published by Springer Nature. This book was released on 2023-07-20 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the synthesis, properties, and emerging applications of 3D graphene. It begins with an introduction to 3D graphene and covers the methods for synthesizing and printing 3D graphene. The book explores the characteristics of 3D graphene, including its morphology, surface area, and porosity, and the techniques used for characterizing it. Architectural and chemical aspects of 3D graphene for emerging applications are discussed, including energy storage, environmental remediation, and biosensing. The book reviews recent advancements in 3D graphene for electrochemical sensors, biosensors, and optical sensors, as well as its use in flexible sensors. It also covers the use of graphene-based materials for the remediation of hydrogen sulfide gas and the removal of inorganic pollutants and pharmaceutical residues. The book further explores the use of 3D graphene in metal-ion and metal-air batteries, flexible and wearable batteries, and high-performance supercapacitors. It also covers its use in photovoltaics, fuel cells, and as electrocatalysts and photocatalysts for water splitting. Additionally, the book discusses the use of 3D graphene in flexible electronics, capacitive de-ionization of water, and theranostic applications. Finally, the book addresses the toxicity, stability, recycling, and risk assessments of 3D graphene, providing a comprehensive understanding of the material's safety and sustainability considerations. Overall, this book is a valuable resource for researchers, engineers, and students interested in the synthesis, properties, and applications of 3D graphene.
Download or read book Graphene Oxide written by Ayrat M. Dimiev and published by John Wiley & Sons. This book was released on 2016-11-14 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to its unique properties, graphene oxide has become one of the most studied materials of the last decade and a great variety of applications have been reported in areas such as sensors, catalysis and biomedical applications. This comprehensive volume systematically describes the fundamental aspects and applications of graphene oxide. The book is designed as an introduction to the topic, so each chapter begins with a discussion on fundamental concepts, then proceeds to review and summarize recent advances in the field. Divided into two parts, the first part covers fundamental aspects of graphene oxide and includes chapters on formation and chemical structure, characterization methods, reduction methods, rheology and optical properties of graphene oxide solutions. Part Two covers numerous graphene oxide applications including field effect transistors, transparent conductive films, sensors, energy harvesting and storage, membranes, composite materials, catalysis and biomedical applications. In each case the differences and advantages of graphene oxide over its non-oxidised counterpart are discussed. The book concludes with a chapter on the challenges of industrial-scale graphene oxide production. Graphene Oxide: Fundamentals and Applications is a valuable reference for academic researchers, and industry scientists interested in graphene oxide, graphene and other carbon materials.
Download or read book Graphene written by Wonbong Choi and published by CRC Press. This book was released on 2016-04-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the late 20th century, graphene-a one-atom-thick planar sheet of sp2-bonded carbon atoms densely packed in a honeycomb crystal lattice-has garnered appreciable attention as a potential next-generation electronic material due to its exceptional properties. These properties include high current density, ballistic transport, chemical inertness,
Download or read book Graphene Production and Application written by Sadia Ameen and published by BoD – Books on Demand. This book was released on 2020-05-06 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is a super thin and strong material with potential to revolutionize the field of technology. As such, graphene is quickly attracting attention from researchers seeking to identify new concepts and applications of this “supermaterial.” Graphene Production and Application is a comprehensive and easy-to-understand source of information on the advances in the growing research on graphene. Written by experts in the field, this book covers the topics of synthetic approaches, characterization techniques, and applications of graphene. It is ideally suited for a broad range of readers including students, instructors, and professionals.
Download or read book Printing of Graphene and Related 2D Materials written by Leonard W. T. Ng and published by Springer. This book was released on 2018-07-24 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the functional ink systems of graphene and related two-dimensional (2D) layered materials in the context of their formulation and potential for various applications, including in electronics, optoelectronics, energy, sensing, and composites using conventional graphics and 3D printing technologies. The authors explore the economic landscape of 2D materials and introduce readers to fundamental properties and production technologies. They also discuss major graphics printing technologies and conventional commercial printing processes that can be used for printing 2D material inks, as well as their specific strengths and weaknesses as manufacturing platforms. Special attention is also paid to scalable production methods for ink formulation, making this an ideal book for students and researchers in academia or industry, who work with functional graphene and other 2D material ink systems and their applications. Explains the state-of-the-art 2D material production technologies that can be manufactured at the industrial scale for functional ink formulation; Provides starting formulation examples of 2D material, functional inks for specific printing methods and their characterization techniques; Reviews existing demonstrations of applications related to printed 2D materials and provides possible future development directions while highlighting current knowledge gaps; Gives a snapshot and forecast of the commercial market for printed GRMs based on the current state of technologies and existing patents.
Download or read book Physics and Chemistry of Graphene written by Toshiaki Enoki and published by CRC Press. This book was released on 2013-01-24 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: From a chemistry aspect, graphene is the extrapolated extreme of condensed polycyclic hydrocarbon molecules to infinite size. Here, the concept on aromaticity which organic chemists utilize is applicable. Interesting issues appearing between physics and chemistry are pronounced in nano-sized graphene (nanographene), as we recognize the importance of the shape of nanographene in understanding its electronic structure. In this book, the fundamental issues on the electronic, magnetic, and chemical properties of condensed polycyclic hyodrocarbon molecules, nanographene and graphene are comprehensively discussed.
Download or read book Graphene based 3D Macrostructures for Clean Energy and Environmental Applications written by Professor Rajasekhar Balasubramanian and published by Royal Society of Chemistry. This book was released on 2021-04-07 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: With escalating global population, increased consumption of fossil fuels, spiralling energy demand, rapid environmental degradation and global climate change, energy and environmental issues are receiving considerable attention worldwide from the purview of sustainable development. In order to address these complex and interlinked challenges, the development of new materials for affordable green energy technologies (batteries, supercapacitors, fuel cells and solar cells) and environmental remediation methods (adsorption, photocatalysis, separation, and sensing) is essential. Three-dimensional graphene-based macrostructures (3D GBMs) are of great interest in these applications given their large surface area and adaptable surface chemistry. Graphene-based 3D Macrostructures for Clean Energy and Environmental Applications provides a critical and comprehensive account of the recent advances in the development and potential applications of high performance 3D GBMs for tackling global energy and environmental issues in a sustainable manner. Particular attention is paid to the fabrication schemes, modulation of physiochemical properties, and their integration into practical devices, and the roles of surface chemistry and pore morphology, as well as their interplay, on the overall performance of 3D GBMs are examined. With contributions from authors around the world this book is a useful resource for both environmental scientists interested in sustainable energy and remediation solutions and materials scientists interested in applications for 3D GMBs.
Download or read book Graphene Science Handbook written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2016-04-21 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the Low Resistivity, High Mobility, and Zero Bandgap of GrapheneThe Graphene Science Handbook is a six-volume set that describes graphene's special structural, electrical, and chemical properties. The book considers how these properties can be used in different applications (including the development of batteries, fuel cells, photovoltaic
Download or read book 2D Materials written by Phaedon Avouris and published by Cambridge University Press. This book was released on 2017-06-29 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn about the most recent advances in 2D materials with this comprehensive and accessible text. Providing all the necessary materials science and physics background, leading experts discuss the fundamental properties of a wide range of 2D materials, and their potential applications in electronic, optoelectronic and photonic devices. Several important classes of materials are covered, from more established ones such as graphene, hexagonal boron nitride, and transition metal dichalcogenides, to new and emerging materials such as black phosphorus, silicene, and germanene. Readers will gain an in-depth understanding of the electronic structure and optical, thermal, mechanical, vibrational, spin and plasmonic properties of each material, as well as the different techniques that can be used for their synthesis. Presenting a unified perspective on 2D materials, this is an excellent resource for graduate students, researchers and practitioners working in nanotechnology, nanoelectronics, nanophotonics, condensed matter physics, and chemistry.
Download or read book Laser induced Graphene written by Ruquan Ye and published by . This book was released on 2020-11-30 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: LIG is a revolutionary technique that uses a common CO2 infrared laser scriber, like the one used in any machine shop, for the direct conversion of polymers into porous graphene under ambient conditions. This technique combines the preparation and patterning of 3D graphene in a single step, without the use of wet chemicals. The ease in the structural engineering and excellent mechanical properties of the 3D graphene obtained have made LIG a versatile technique for applications across many fields. This book compiles cutting-edge research on LIG by different research groups all over the world. It discusses the strategies that have been developed to synthesize and engineer graphene, including controlling its properties such as porosity, composition, and surface characteristics. The authors are pioneers in the discovery and development of LIG and the book will appeal to anyone involved in nanotechnology, chemistry, environmental sciences, and device development, especially those with an interest in the synthesis and applications of graphene-based materials.
Download or read book 2D and 3D Graphene Nanocomposites written by Olga E. Glukhova and published by CRC Press. This book was released on 2019-10-31 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent decades, graphene composites have received considerable attention due to their unique structural features and extraordinary properties. 2D and 3D graphene hybrid structures are widely used in memory, microelectronic, and optoelectronic devices; energy- and power-density supercapacitors; light-emitting diodes; and sensors, batteries, and solar cells. This book covers the fundamental properties of the latest graphene-based 2D and 3D composite materials. The book is a result of the collective work of many highly qualified specialists in the field of experimental and theoretical research on graphene and its derivatives. It describes experimental methods for obtaining and characterizing samples of chemically modified graphene, details conceptual foundations of popular methods for computer modeling of graphene nanostructures, and compiles original computational techniques developed by the chapter authors. It discusses the potential application areas and modifications of graphene-based 2D and 3D composite materials and interprets the interesting physical effects discovered for the first time for graphene materials under consideration. The book is useful for graduate students and researchers as well as specialists in industrial engineering. It will also appeal to those involved in materials science, condensed matter physics, nanotechnology, physical electronics, nano- and optoelectronics.
Download or read book Fundamentals Properties and Applications of Polymer Nanocomposites written by Joseph H. Koo and published by Cambridge University Press. This book was released on 2016-10-31 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused primarily on polymer nanocomposites, based on the author's research experience as well as open literature. The environmental health and safety aspects of nanomaterials and polymer nanocomposites, risk assessment and safety standards, and fire toxicity of polymer nanocomposites, are studied. In the final chapter, a brief overview of opportunities, trends, and challenges of polymer nanocomposites are included. Throughout the book, the theme is developed that polymer nanocomposites are a whole family of polymeric materials whose properties are capable of being tailored to meet specific applications. This volume serves as a general introduction to students and researchers just entering the field and to scholars from other subfields seeking information.
Download or read book Graphene Science Handbook Six Volume Set written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2016-04-26 with total page 3491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is the strongest material ever studied and can be an efficient substitute for silicon. This six-volume handbook focuses on fabrication methods, nanostructure and atomic arrangement, electrical and optical properties, mechanical and chemical properties, size-dependent properties, and applications and industrialization. There is no other major reference work of this scope on the topic of graphene, which is one of the most researched materials of the twenty-first century. The set includes contributions from top researchers in the field and a foreword written by two Nobel laureates in physics.
Download or read book Graphene written by Serhii Shafraniuk and published by CRC Press. This book was released on 2015-05-05 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is the first example of two-dimensional materials and is the most important growth area of contemporary research. It forms the basis for new nanoelectronic applications. Graphene, which comprises field-effect structures, has remarkable physical properties.This book focuses on practical applications determined by the unique properties of gr
Download or read book Innovations in Graphene Based Polymer Composites written by Sanjay Mavinkere Rangappa and published by Woodhead Publishing. This book was released on 2022-06-15 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovations in Graphene-Based Polymer Composites reviews recent developments in this important field of research. The book's chapters focus on processing methods, functionalization, mechanical, electrical and thermal properties, applications and life cycle assessment. Leading researchers from industry, academia and government research institutions from across the globe have contributed to the book, making it a valuable reference resource for materials scientists, academic researchers and industrial engineers working on recent developments in the area of graphene-based materials, graphene-based polymer blends and composites. Readers will gain insights into what has been explored to-date, along with associated benefits and challenges for the future. - Presents a strong emphasis on synthesis methods, functionalization, processing and properties - Includes chapters on characterization, electrical conductivity and modeling and simulation - Provides recent advances in applications, including drawbacks and future scope
Download or read book Handbook of Polymer and Ceramic Nanotechnology written by Chaudhery Mustansar Hussain and published by Springer. This book was released on 2021-09-13 with total page 1667 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook examines the recent advances in the nanotechnology of polymers and ceramics, which possess outstanding mechanical properties and compatibility given their unique physical and chemical properties caused by the unusually large surface area to volume ratios and high interfacial reactivity. This handbook highlights the various compositions and morphologies of polymer and ceramic nanomaterials that can serve as powerful tools for the diverse applications in areas such as electronics, photonics, shape-memory alloys, biomaterials and biomedical nanomaterials, graphene-based technologies, and textiles and packaging. The handbook addresses safety, economics, green production and sustainability. The book contains a section on functionalization of these molecules, which only increases the possibility of developing even more versatile materials that can be fine-tuned for specific applications. Filling a gap in the literature, this handbook provides comprehensive coverage of properties, fabrication, characterization, functionalization methods and applications at both experimental and theoretical models scales. Economic, toxicological, regulatory, and environmental concerns regarding applications are also discussed in detail. Special attention is paid to sustainable approaches that reduce costs in terms of chemicals and time consumption. The book covers research trends, challenges, and prospective topics as well.
