Download or read book 2024 IEEE ACM 3rd International Conference on AI Engineering Software Engineering for AI CAIN written by IEEE Staff and published by . This book was released on 2024-04-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The area of interest for CAIN is Software Engineering for AI improving the development of AI based systems throughout the full life cycle
Download or read book Contemporary Empirical Methods in Software Engineering written by Michael Felderer and published by Springer Nature. This book was released on 2020-08-27 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents contemporary empirical methods in software engineering related to the plurality of research methodologies, human factors, data collection and processing, aggregation and synthesis of evidence, and impact of software engineering research. The individual chapters discuss methods that impact the current evolution of empirical software engineering and form the backbone of future research. Following an introductory chapter that outlines the background of and developments in empirical software engineering over the last 50 years and provides an overview of the subsequent contributions, the remainder of the book is divided into four parts: Study Strategies (including e.g. guidelines for surveys or design science); Data Collection, Production, and Analysis (highlighting approaches from e.g. data science, biometric measurement, and simulation-based studies); Knowledge Acquisition and Aggregation (highlighting literature research, threats to validity, and evidence aggregation); and Knowledge Transfer (discussing open science and knowledge transfer with industry). Empirical methods like experimentation have become a powerful means of advancing the field of software engineering by providing scientific evidence on software development, operation, and maintenance, but also by supporting practitioners in their decision-making and learning processes. Thus the book is equally suitable for academics aiming to expand the field and for industrial researchers and practitioners looking for novel ways to check the validity of their assumptions and experiences. Chapter 17 is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.
Download or read book Software Architecture written by Stefan Biffl and published by Springer. This book was released on 2021-08-26 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 15th International Conference on Software Architecture, ECSA 2021, held in Sweden, in September 2021. Due to COVID-19 pandemic the conference was held virtually. In the Research Track, 11 full papers presented together with 5 short papers were carefully reviewed and selected from 58 submissions. The papers are organized in topical sections as follows: architectures for reconfigurable and self-adaptive systems; machine learning for software architecture; architectural knowledge, decisions, and rationale; architecting for quality attributes ̧ hitecture-centric source code analysis
Download or read book Business Modeling and Software Design written by Boris Shishkov and published by Springer Nature. This book was released on with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recommendation Systems in Software Engineering written by Martin P. Robillard and published by Springer Science & Business. This book was released on 2014-04-30 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the growth of public and private data stores and the emergence of off-the-shelf data-mining technology, recommendation systems have emerged that specifically address the unique challenges of navigating and interpreting software engineering data. This book collects, structures and formalizes knowledge on recommendation systems in software engineering. It adopts a pragmatic approach with an explicit focus on system design, implementation, and evaluation. The book is divided into three parts: “Part I – Techniques” introduces basics for building recommenders in software engineering, including techniques for collecting and processing software engineering data, but also for presenting recommendations to users as part of their workflow. “Part II – Evaluation” summarizes methods and experimental designs for evaluating recommendations in software engineering. “Part III – Applications” describes needs, issues and solution concepts involved in entire recommendation systems for specific software engineering tasks, focusing on the engineering insights required to make effective recommendations. The book is complemented by the webpage rsse.org/book, which includes free supplemental materials for readers of this book and anyone interested in recommendation systems in software engineering, including lecture slides, data sets, source code, and an overview of people, groups, papers and tools with regard to recommendation systems in software engineering. The book is particularly well-suited for graduate students and researchers building new recommendation systems for software engineering applications or in other high-tech fields. It may also serve as the basis for graduate courses on recommendation systems, applied data mining or software engineering. Software engineering practitioners developing recommendation systems or similar applications with predictive functionality will also benefit from the broad spectrum of topics covered.
Download or read book Management Information Systems written by Kenneth C. Laudon and published by Pearson Educación. This book was released on 2004 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Management Information Systems provides comprehensive and integrative coverage of essential new technologies, information system applications, and their impact on business models and managerial decision-making in an exciting and interactive manner. The twelfth edition focuses on the major changes that have been made in information technology over the past two years, and includes new opening, closing, and Interactive Session cases.
Download or read book Continuous Software Engineering written by Jan Bosch and published by Springer. This book was released on 2014-11-11 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides essential insights on the adoption of modern software engineering practices at large companies producing software-intensive systems, where hundreds or even thousands of engineers collaborate to deliver on new systems and new versions of already deployed ones. It is based on the findings collected and lessons learned at the Software Center (SC), a unique collaboration between research and industry, with Chalmers University of Technology, Gothenburg University and Malmö University as academic partners and Ericsson, AB Volvo, Volvo Car Corporation, Saab Electronic Defense Systems, Grundfos, Axis Communications, Jeppesen (Boeing) and Sony Mobile as industrial partners. The 17 chapters present the “Stairway to Heaven” model, which represents the typical evolution path companies move through as they develop and mature their software engineering capabilities. The chapters describe theoretical frameworks, conceptual models and, most importantly, the industrial experiences gained by the partner companies in applying novel software engineering techniques. The book’s structure consists of six parts. Part I describes the model in detail and presents an overview of lessons learned in the collaboration between industry and academia. Part II deals with the first step of the Stairway to Heaven, in which R&D adopts agile work practices. Part III of the book combines the next two phases, i.e., continuous integration (CI) and continuous delivery (CD), as they are closely intertwined. Part IV is concerned with the highest level, referred to as “R&D as an innovation system,” while Part V addresses a topic that is separate from the Stairway to Heaven and yet critically important in large organizations: organizational performance metrics that capture data, and visualizations of the status of software assets, defects and teams. Lastly, Part VI presents the perspectives of two of the SC partner companies. The book is intended for practitioners and professionals in the software-intensive systems industry, providing concrete models, frameworks and case studies that show the specific challenges that the partner companies encountered, their approaches to overcoming them, and the results. Researchers will gain valuable insights on the problems faced by large software companies, and on how to effectively tackle them in the context of successful cooperation projects.
Download or read book Case Study Research in Software Engineering written by Per Runeson and published by John Wiley & Sons. This book was released on 2012-03-07 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on their own experiences of in-depth case studies of software projects in international corporations, in this book the authors present detailed practical guidelines on the preparation, conduct, design and reporting of case studies of software engineering. This is the first software engineering specific book on the case study research method.
Download or read book Sensors for Health Monitoring written by Nilanjan Dey and published by Academic Press. This book was released on 2019-09-09 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensors for Health Monitoring discusses the characteristics of U-Healthcare systems in different domains, providing a foundation for working professionals and undergraduate and postgraduate students. The book provides information and advice on how to choose the best sensors for a U-Healthcare system, advises and guides readers on how to overcome challenges relating to data acquisition and signal processing, and presents comprehensive coverage of up-to-date requirements in hardware, communication and calculation for next-generation uHealth systems. It then compares new technological and technical trends and discusses how they address expected u-Health requirements. In addition, detailed information on system operations is presented and challenges in ubiquitous computing are highlighted. The book not only helps beginners with a holistic approach toward understanding u-Health systems, but also presents researchers with the technological trends and design challenges they may face when designing such systems. Presents an outstanding update on the use of U-Health data analysis and management tools in different applications, highlighting sensor systems Highlights Internet of Things enabled U-Healthcare Covers different data transmission techniques, applications and challenges with extensive case studies for U-Healthcare systems
Download or read book Information Technology and the U S Workforce written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-04-18 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have yielded significant advances in computing and communication technologies, with profound impacts on society. Technology is transforming the way we work, play, and interact with others. From these technological capabilities, new industries, organizational forms, and business models are emerging. Technological advances can create enormous economic and other benefits, but can also lead to significant changes for workers. IT and automation can change the way work is conducted, by augmenting or replacing workers in specific tasks. This can shift the demand for some types of human labor, eliminating some jobs and creating new ones. Information Technology and the U.S. Workforce explores the interactions between technological, economic, and societal trends and identifies possible near-term developments for work. This report emphasizes the need to understand and track these trends and develop strategies to inform, prepare for, and respond to changes in the labor market. It offers evaluations of what is known, notes open questions to be addressed, and identifies promising research pathways moving forward.
Download or read book Information Technology New Generations written by Shahram Latifi and published by Springer. This book was released on 2018-04-12 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a collection of peer-reviewed, scientific articles from the 15th International Conference on Information Technology – New Generations, held at Las Vegas. The collection addresses critical areas of Machine Learning, Networking and Wireless Communications, Cybersecurity, Data Mining, Software Engineering, High Performance Computing Architectures, Computer Vision, Health, Bioinformatics, and Education.
Download or read book E Learning Systems written by Aleksandra Klašnja-Milićević and published by Springer. This book was released on 2016-07-19 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph provides a comprehensive research review of intelligent techniques for personalisation of e-learning systems. Special emphasis is given to intelligent tutoring systems as a particular class of e-learning systems, which support and improve the learning and teaching of domain-specific knowledge. A new approach to perform effective personalization based on Semantic web technologies achieved in a tutoring system is presented. This approach incorporates a recommender system based on collaborative tagging techniques that adapts to the interests and level of students' knowledge. These innovations are important contributions of this monograph. Theoretical models and techniques are illustrated on a real personalised tutoring system for teaching Java programming language. The monograph is directed to, students and researchers interested in the e-learning and personalization techniques.
Download or read book Computational Intelligence written by David I. Poole and published by Oxford University Press on Demand. This book was released on 1998 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an integrated introduction to artificial intelligence. Develops AI representation schemes and describes their uses for diverse applications, from autonomous robots to diagnostic assistants to infobots. DLC: Artificial intelligence.
Download or read book Machine Learning in Non Stationary Environments written by Masashi Sugiyama and published by MIT Press. This book was released on 2012-03-30 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory, algorithms, and applications of machine learning techniques to overcome “covariate shift” non-stationarity. As the power of computing has grown over the past few decades, the field of machine learning has advanced rapidly in both theory and practice. Machine learning methods are usually based on the assumption that the data generation mechanism does not change over time. Yet real-world applications of machine learning, including image recognition, natural language processing, speech recognition, robot control, and bioinformatics, often violate this common assumption. Dealing with non-stationarity is one of modern machine learning's greatest challenges. This book focuses on a specific non-stationary environment known as covariate shift, in which the distributions of inputs (queries) change but the conditional distribution of outputs (answers) is unchanged, and presents machine learning theory, algorithms, and applications to overcome this variety of non-stationarity. After reviewing the state-of-the-art research in the field, the authors discuss topics that include learning under covariate shift, model selection, importance estimation, and active learning. They describe such real world applications of covariate shift adaption as brain-computer interface, speaker identification, and age prediction from facial images. With this book, they aim to encourage future research in machine learning, statistics, and engineering that strives to create truly autonomous learning machines able to learn under non-stationarity.
Download or read book Data Science for Undergraduates written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-11-11 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data science is emerging as a field that is revolutionizing science and industries alike. Work across nearly all domains is becoming more data driven, affecting both the jobs that are available and the skills that are required. As more data and ways of analyzing them become available, more aspects of the economy, society, and daily life will become dependent on data. It is imperative that educators, administrators, and students begin today to consider how to best prepare for and keep pace with this data-driven era of tomorrow. Undergraduate teaching, in particular, offers a critical link in offering more data science exposure to students and expanding the supply of data science talent. Data Science for Undergraduates: Opportunities and Options offers a vision for the emerging discipline of data science at the undergraduate level. This report outlines some considerations and approaches for academic institutions and others in the broader data science communities to help guide the ongoing transformation of this field.
Download or read book Introduction to Artificial Intelligence written by Mariusz Flasiński and published by Springer. This book was released on 2016-08-31 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the chapters in Part I of this textbook the author introduces the fundamental ideas of artificial intelligence and computational intelligence. In Part II he explains key AI methods such as search, evolutionary computing, logic-based reasoning, knowledge representation, rule-based systems, pattern recognition, neural networks, and cognitive architectures. Finally, in Part III, he expands the context to discuss theories of intelligence in philosophy and psychology, key applications of AI systems, and the likely future of artificial intelligence. A key feature of the author's approach is historical and biographical footnotes, stressing the multidisciplinary character of the field and its pioneers. The book is appropriate for advanced undergraduate and graduate courses in computer science, engineering, and other applied sciences, and the appendices offer short formal, mathematical models and notes to support the reader.
Download or read book Synthesis Techniques and Optimizations for Reconfigurable Systems written by Ryan Kastner and published by Springer Science & Business Media. This book was released on 2003-10-27 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis Techniques and Optimization for Reconfigurable Systems discusses methods used to model reconfigurable applications at the system level, many of which could be incorporated directly into modern compilers. The book also discusses a framework for reconfigurable system synthesis, which bridges the gap between application-level compiler analysis and high-level device synthesis. The development of this framework (discussed in Chapter 5), and the creation of application analysis which further optimize its output (discussed in Chapters 7, 8, and 9), represent over four years of rigorous investigation within UCLA's Embedded and Reconfigurable Laboratory (ERLab) and UCSB's Extensible, Programmable and Reconfigirable Embedded SystemS (ExPRESS) Group. The research of these systems has not yet matured, and we continually strive to develop data and methods, which will extend the collective understanding of reconfigurable system synthesis.