Download or read book 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe EEEIC written by and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe EEEIC I and CPS Europe written by IEEE Staff and published by . This book was released on 2018-06-12 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The conference provides an opportunity for researchers, professors, academicians, scientists and professional engineers to present their work, publish their results, exchange ideas and network for scientific and industrial collaborations The main topics are related to the power systems and electrical engineering with particular interest to new technologies The general scope of the I and CPS Europe conference is to provide practical information about the planning, design, construction, operation and analysis of industrial and commercial power systems for Europe
Download or read book 2018 Conference Proceedings written by and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Indoor Thermal Comfort written by Francesca Romana d’Ambrosio Alfano and published by MDPI. This book was released on 2020-12-07 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the century begins, natural resources are under increasing pressure, threatening public health and development. As a result, the balance between man and nature has been disrupted, with climatic changes whose effects are starting to be irreversible. Due to the relationship between the quality of the indoor built environment and its energy demand, thermal comfort issues are still relevant in the disciplinary debate. This is also because the indoor environment has a potential impact on occupants' health and productivity, affecting their physical and psychological conditions. To achieve a sustainable compromise in terms of comfort and energy requirements, several challenging questions must be answered with regard to design, technical, engineering, psychological, and physiological issues and, finally, potential interactions with other IEQ issues that require a holistic way to conceive the building envelope design. This Special Issue collected original research and review articles on innovative designs, systems, and/or control domains that can enhance thermal comfort, work productivity, and wellbeing in a built environment, along with works considering the integration of human factors in buildings’ energy performance.
Download or read book Distributed Power Generation Scheduling Modelling and Expansion Planning written by Javier Contreras and published by MDPI. This book was released on 2021-06-02 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed generation is becoming more important in electrical power systems due to the decentralization of energy production. Within this new paradigm, new approaches for the operation and planning of distributed power generation are yet to be explored. This book deals with distributed energy resources, such as renewable-based distributed generators and energy storage units, among others, considering their operation, scheduling, and planning. Moreover, other interesting aspects such as demand response, electric vehicles, aggregators, and microgrid are also analyzed. All these aspects constitute a new paradigm that is explored in this Special Issue.
Download or read book Innovations in Land Water and Energy for Vietnam s Sustainable Development written by Mariano Anderle and published by Springer Nature. This book was released on 2020-11-28 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent innovative trends in land, water and energy management in Vietnam. Presenting the main projects and outcomes of a close collaboration between Italian and Vietnamese researchers in the last three years, the book is divided into three main sections: environment, climate change and land management in Vietnam; energy for Vietnam; and cities and utilities in Vietnam. The first section focuses on water systems, including rivers and seacoasts, and on new growing methods for more sustainable agriculture. The second section addresses energy and wastewater. The country’s rapid growth is a major challenge in terms of reinforcing the electrical infrastructures, and as such this section offers an overview of the government’s planned measures and their impact on the Vietnamese power system. The third section highlights cities and utilities in the context of increasing urbanization, exploring the urban morphology of the Vietnamese metropolis, particularly Hanoi and Ho Chi Minh City.
Download or read book IoT for Smart Operations in the Oil and Gas Industry written by Razin Farhan Hussain and published by Gulf Professional Publishing. This book was released on 2022-09-20 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: IoT for Smart Operations in the Oil and Gas Industry elaborates on how the synergy between state-of-the-art computing platforms, such as Internet of Things (IOT), cloud computing, artificial intelligence, and, in particular, modern machine learning methods, can be harnessed to serve the purpose of a more efficient oil and gas industry. The reference explores the operations performed in each sector of the industry and then introduces the computing platforms and smart technologies that can enhance the operation, lower costs, and lower carbon footprint. Safety and security content is included, in particular, cybersecurity and potential threats to smart oil and gas solutions, focusing on adversarial effects of smart solutions and problems related to the interoperability of human-machine intelligence in the context of the oil and gas industry. Detailed case studies are included throughout to learn and research for further applications. Covering the latest topics and solutions, IoT for Smart Operations in the Oil and Gas Industry delivers a much-needed reference for the engineers and managers to understand modern computing paradigms for Industry 4.0 and the oil and gas industry. Follows a systematic and categorical taxonomy of the upstream, midstream, and downstream processes paired with cutting-edge technologies, which benefit computer scientists and engineers Understands advanced computing technologies reducing the costs of existing operations and carbon footprint Deeply dives into case studies that cover the entire oil and gas spectrum and explain bridges into applications
Download or read book Proceedings of the 2nd International Conference on Emerging Technologies and Intelligent Systems written by Mohammed A. Al-Sharafi and published by Springer Nature. This book was released on 2023-03-12 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book sheds light on the recent research directions in intelligent systems and their applications. It involves two main themes, including management information systems and advances in information security and networking. The discussion of the most recent designs, advancements, and modifications of intelligent systems, as well as their applications, is a key component of the chapters contributed to the aforementioned subjects.
Download or read book Machine Learning Paradigm for Internet of Things Applications written by Shalli Rani and published by John Wiley & Sons. This book was released on 2022-03-02 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: MACHINE LEARNING PARADIGM FOR INTERNET OF THINGS APPLICATIONS As companies globally realize the revolutionary potential of the IoT, they have started finding a number of obstacles they need to address to leverage it efficiently. Many businesses and industries use machine learning to exploit the IoT’s potential and this book brings clarity to the issue. Machine learning (ML) is the key tool for fast processing and decision-making applied to smart city applications and next-generation IoT devices, which require ML to satisfy their working objective. Machine learning has become a common subject to all people like engineers, doctors, pharmacy companies, and business people. The book addresses the problem and new algorithms, their accuracy, and their fitness ratio for existing real-time problems. Machine Learning Paradigm for Internet of Thing Applications provides the state-of-the-art applications of machine learning in an IoT environment. The most common use cases for machine learning and IoT data are predictive maintenance, followed by analyzing CCTV surveillance, smart home applications, smart-healthcare, in-store ‘contextualized marketing’, and intelligent transportation systems. Readers will gain an insight into the integration of machine learning with IoT in these various application domains.
Download or read book Machine Learning and Data Science in the Power Generation Industry written by Patrick Bangert and published by Elsevier. This book was released on 2021-01-14 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machine Learning and Data Science in the Power Generation Industry explores current best practices and quantifies the value-add in developing data-oriented computational programs in the power industry, with a particular focus on thoughtfully chosen real-world case studies. It provides a set of realistic pathways for organizations seeking to develop machine learning methods, with a discussion on data selection and curation as well as organizational implementation in terms of staffing and continuing operationalization. It articulates a body of case study–driven best practices, including renewable energy sources, the smart grid, and the finances around spot markets, and forecasting. Provides best practices on how to design and set up ML projects in power systems, including all nontechnological aspects necessary to be successful Explores implementation pathways, explaining key ML algorithms and approaches as well as the choices that must be made, how to make them, what outcomes may be expected, and how the data must be prepared for them Determines the specific data needs for the collection, processing, and operationalization of data within machine learning algorithms for power systems Accompanied by numerous supporting real-world case studies, providing practical evidence of both best practices and potential pitfalls
Download or read book Methods Algorithms and Circuits for Photovoltaic Systems Diagnosis and Control written by Giovanni Spagnuolo and published by MDPI. This book was released on 2021-04-29 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: In modern photovoltaic systems, there is an ever-increasing need to improve the system efficiency, to detect internal faults and to guarantee service continuity. The only way to meet these objectives is to utilize and create synergies between diagnostic techniques and control algorithms. Diagnostic methods can be implemented through module-dedicated electronics, by running on real-time embedded systems or by using a huge database on the cloud, profiting from artificial intelligence, machine learning, and classifiers. Model-based diagnostic approaches and data-driven methods are attracting the interest of the scientific community for the automatic detection of phenomena like the occurrence of hot spots, the increase of the ohmic losses, the degradation due to unexpected potentials (PID), switch failures in power electronic converters, and also the reduction of the power production due to soiling or partial shadowing. The detection of malfunctioning or even faults affecting the whole power conversion chain, from the photovoltaic modules to the power conversion stages, allows to perform proper control actions, also in terms of MPPT. Control algorithms, running on an embedded system, are optimized, e.g., through the online adaptation of their own parameters, by suitably processing data coming from the diagnostic algorithms. This book presents recent and original results about the diagnostic approaches to photovoltaic modules and related power electronics and control strategies with the aim to maximize the photovoltaic output power, to increase the whole system efficiency and to guarantee service continuity.
Download or read book Computational Science and Its Applications ICCSA 2020 written by Osvaldo Gervasi and published by Springer Nature. This book was released on 2020-10-01 with total page 1003 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seven volumes LNCS 12249-12255 constitute the refereed proceedings of the 20th International Conference on Computational Science and Its Applications, ICCSA 2020, held in Cagliari, Italy, in July 2020. Due to COVID-19 pandemic the conference was organized in an online event. Computational Science is the main pillar of most of the present research, industrial and commercial applications, and plays a unique role in exploiting ICT innovative technologies. The 466 full papers and 32 short papers presented were carefully reviewed and selected from 1450 submissions. Apart from the general track, ICCSA 2020 also include 52 workshops, in various areas of computational sciences, ranging from computational science technologies, to specific areas of computational sciences, such as software engineering, security, machine learning and artificial intelligence, blockchain technologies, and of applications in many fields.
Download or read book Bio inspired Computing Theories and Applications written by Linqiang Pan and published by Springer Nature. This book was released on 2020-04-01 with total page 797 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set (CCIS 1159 and CCIS 1160) constitutes the proceedings of the 14th International Conference on Bio-inspired Computing: Theories and Applications, BIC-TA 2019, held in Zhengzhou, China, in November 2019. The 121 full papers presented in both volumes were selected from 197 submissions. The papers are organized according to the topical headings: evolutionary computation and swarm intelligence; bioinformatics and systems biology; complex networks; DNA and molecular computing; neural networks and articial intelligence.
Download or read book Networked Control Systems for Connected and Automated Vehicles written by Alexander Guda and published by Springer Nature. This book was released on 2022-11-15 with total page 2004 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of large-scale distributed energy systems over communication networks is an important topic with many application domains. The book presents novel concepts of distributed control for networked and cyber-physical systems (CPS), such as smart industrial production lines, smart energy grids, and autonomous vehicular systems. It focuses on new solutions in managing data and connectivity to support connected and automated vehicles (CAV). The book compiles original research papers presented at the conference “Networked Control Systems for Connected and Automated Vehicles” (Russia). The latest connected and automated vehicle technologies for next generation autonomous vehicles are presented. The book sets new goals for the standardization of the scientific results obtained and the advancement to the level of full autonomy and full self-driving (FSD). The book presents the latest research in artificial intelligence, assessing virtual environments, deep learning systems, and sensor fusion for automated vehicles. Particular attention is paid to new safety standards, safety and security systems, and control of epidemic spreading over networks. The issues of building modern transport infrastructure facilities are also discussed in the articles presented in this book. The book is of considerable interest to scientists, researchers, and graduate students in the field of transport systems, as well as for managers and employees of companies using or producing equipment for these systems.
Download or read book Disruptive Technologies for Big Data and Cloud Applications written by J. Dinesh Peter and published by Springer Nature. This book was released on 2022-08-01 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a written record of the synergy that already exists among the research communities and represents a solid framework in the advancement of big data and cloud computing disciplines from which new interaction will result in the future. This book is a compendium of the International Conference on Big Data and Cloud Computing (ICBDCC 2021). It includes recent advances in big data analytics, cloud computing, the Internet of nano things, cloud security, data analytics in the cloud, smart cities and grids, etc. This book primarily focuses on the application of knowledge that promotes ideas for solving the problems of society through cutting-edge technologies. The articles featured in this book provide novel ideas that contribute to the growth of world-class research and development. The contents of this book are of interest to researchers and professionals alike.
Download or read book ICIDC 2022 written by Zuriati Ahmad Zukarnain and published by European Alliance for Innovation. This book was released on 2022-10-13 with total page 2599 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2022 International Conference on Information Economy, Data Modeling and Cloud Computing (ICIDC 2022) was successfully held in Qingdao, China from June 17 to 19, 2022. Under the impact of COVID-19, ICIDC 2022 was held adopting a combination of online and offline conference. During this conference, we were greatly honored to have Prof Datuk Dr Hj Kasim Hj Md Mansur from Universiti Malaysia Sabah, Malaysia to serve as our Conference Chairman. And there were 260 individuals attending the conference. The conference agenda was composed of keynote speeches, oral presentations, and online Q&A discussion. The proceedings of ICIDC 2022 cover various topics, including Big Data Finance, E-Commerce and Digital Business, Modeling Method, 3D Modeling, Internet of Things, Cloud Computing Platform, etc. All the papers have been checked through rigorous review and processes to meet the requirements of publication. Data modeling allows us to obtain the dynamic change trend of various indicator data, so how to use big data information to model and study the development trend of economic operation plan is of great significance. And that is exactly the purpose of this conference, focusing on the application of big data in the economic field as well as conducting more profound research in combination with cloud computing.
Download or read book New Perspectives on Electric Vehicles written by Marian Găiceanu and published by BoD – Books on Demand. This book was released on 2022-03-30 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern transportation systems have adverse effects on the climate, emitting greenhouse gases and polluting the air. As such, new modes of non-polluting transportation, including electric vehicles and plug-in hybrids, are a major focus of current research and development. This book explores the future of transportation. It is divided into four sections: “Electric Vehicles Infrastructures,” “Architectures of the Electric Vehicles,” “Technologies of the Electric Vehicles,” and “Propulsion Systems.” The chapter authors share their research experience regarding the main barriers in electric vehicle implementation, their thoughts on electric vehicle modelling and control, and network communication challenges.
