Download or read book 2016 International Conference on Software Networking ICSN written by IEEE Staff and published by . This book was released on 2016-05-23 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Conference Scope and Topics are the following Track 1 Advancement in SDN technology SDN and Virtualization architectures Advanced SDN services and validation Service chaining and orchestration New controller architectures Security and management on SDN Experimentation and deployment Track 2 SDN and NFV Network Function Virtualization and SDN Advances NFV infrastructure NFV management orchestration NFV Software architecture Reliability and availability Integration of SDN and NFV Experimentation and deployments Track 3 Interworking withlegacy networks Carrier grade SDN architectures Experimentation deployments Track 4 Application & management of SDN NFV Management architeture for SDN NFV
Download or read book ICSN 2016 written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Communications and Networking written by Bo Li and published by Springer. This book was released on 2018-03-26 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set LNICST 236-237 constitutes the post-conference proceedings of the 12th EAI International Conference on Communications and Networking, ChinaCom 2017, held in Xi’an, China, in September 2017. The total of 112 contributions presented in these volumes are carefully reviewed and selected from 178 submissions. The papers are organized in topical sections on wireless communications and networking, satellite and space communications and networking, big data network track, multimedia communications and smart networking, signal processing and communications, network and information security, advances and trends of V2X networks.
Download or read book Quality Reliability Security and Robustness in Heterogeneous Systems written by Lei Wang and published by Springer. This book was released on 2018-03-28 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-conference proceedings of the 13th International Conference on Quality, Reliability, Security and Robustness in Heterogeneous Networks, QShine 2017, held in Dalian, China, in December 2017. The 25 revised full papers were carefully reviewed and selected from 43 submissions. The papers are organized thematically in tracks, starting with mobile and wireless networks, quality and reliability, wireless networking algorithms and protocols, and smart applications.
Download or read book Science Engineering Management and Information Technology written by Abolfazl Mirzazadeh and published by Springer Nature. This book was released on 2023-08-20 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set constitutes selected papers presented during the First First International Conference on Science, Engineering Management and Information Technology, SEMIT 2022, held virtually in Ankara, Turkey, in February 2–3, 2022 and in September 8-9, 2022. The 37 papers presented were carefully reviewed and selected from the 261 qualified submissions. The papers are organized in the following topical sections: application of computer science and technology in operations and supply chain management; advances of engineering technology and Artificial Intelligence in application management; human factors management systems based on information technology; technology-aided decision-making: systems, applications, and modern solutions.
Download or read book Digital Transformation and Industry 4 0 for Sustainable Supply Chain Performance written by Sachin S. Kamble and published by Springer Nature. This book was released on 2023-02-03 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the interplay between digital transformation, industry 4.0 technologies, and sustainable supply chain performance. The book mainly focuses on presenting case studies and empirical studies demonstrating how the industry 4.0 technologies interact with the conventional manufacturing practices such as lean manufacturing, circular economy practices, total quality management, and maintenance management, while achieving enhanced sustainable supply chain performance. The book guides the practitioners to consider the status of conventional supply chains in their organisations while designing industry 4.0 systems. This book is a useful resource for researchers and academicians to understand the interplay between existing technologies, industry 4.0 technologies, and sustainable performance in the digital transformation journey.
Download or read book Security Privacy and Anonymity in Computation Communication and Storage written by Guojun Wang and published by Springer Nature. This book was released on 2021-02-04 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 13th International Conference on Security, Privacy, and Anonymity in Computation, Communication, and Storage, SpaCCS 2020, held in Nanjing, China, in December 2020. The 30 full papers were carefully reviewed and selected from 88 submissions. The papers cover many dimensions including security algorithms and architectures, privacy-aware policies, regulations and techniques, anonymous computation and communication, encompassing fundamental theoretical approaches, practical experimental projects, and commercial application systems for computation, communication and storage. SpaCCS 2020 is held jointly with the 11th International Workshop on Trust, Security and Privacy for Big Data (TrustData 2020), the 10th International Symposium on Trust, Security and Privacy for Emerging Applications (TSP 2020), the 9th International Symposium on Security and Privacy on Internet of Things (SPIoT 2020), the 6th International Symposium on Sensor-Cloud Systems (SCS 2020), the 2nd International Workshop on Communication, Computing, Informatics and Security (CCIS 2020), the First International Workshop on Intelligence and Security in Next Generation Networks (ISNGN 2020), the First International Symposium on Emerging Information Security and Applications (EISA 2020).
Download or read book Transportation and Power Grid in Smart Cities written by Hussein T. Mouftah and published by John Wiley & Sons. This book was released on 2018-11-28 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the increasing worldwide trend in population migration into urban centers, we are beginning to see the emergence of the kinds of mega-cities which were once the stuff of science fiction. It is clear to most urban planners and developers that accommodating the needs of the tens of millions of inhabitants of those megalopolises in an orderly and uninterrupted manner will require the seamless integration of and real-time monitoring and response services for public utilities and transportation systems. Part speculative look into the future of the world’s urban centers, part technical blueprint, this visionary book helps lay the groundwork for the communication networks and services on which tomorrow’s “smart cities” will run. Written by a uniquely well-qualified author team, this book provides detailed insights into the technical requirements for the wireless sensor and actuator networks required to make smart cities a reality.
Download or read book Computational Vision and Bio Inspired Computing written by S. Smys and published by Springer Nature. This book was released on 2022-03-30 with total page 877 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes selected papers from the 5th International Conference on Computational Vision and Bio Inspired Computing (ICCVBIC 2021), held in Coimbatore, India, during November 25–26, 2021. This book presents state-of-the-art research innovations in computational vision and bio-inspired techniques. The book reveals the theoretical and practical aspects of bio-inspired computing techniques, like machine learning, sensor-based models, evolutionary optimization and big data modeling and management that make use of effectual computing processes in the bio-inspired systems. It also contributes to the novel research that focuses on developing bio-inspired computing solutions for various domains, such as human–computer interaction, image processing, sensor-based single processing, recommender systems and facial recognition, which play an indispensable part in smart agriculture, smart city, biomedical and business intelligence applications.
Download or read book New Knowledge in Information Systems and Technologies written by Álvaro Rocha and published by Springer. This book was released on 2019-03-29 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes a selection of articles from The 2019 World Conference on Information Systems and Technologies (WorldCIST’19), held from April 16 to 19, at La Toja, Spain. WorldCIST is a global forum for researchers and practitioners to present and discuss recent results and innovations, current trends, professional experiences and challenges in modern information systems and technologies research, together with their technological development and applications. The book covers a number of topics, including A) Information and Knowledge Management; B) Organizational Models and Information Systems; C) Software and Systems Modeling; D) Software Systems, Architectures, Applications and Tools; E) Multimedia Systems and Applications; F) Computer Networks, Mobility and Pervasive Systems; G) Intelligent and Decision Support Systems; H) Big Data Analytics and Applications; I) Human–Computer Interaction; J) Ethics, Computers & Security; K) Health Informatics; L) Information Technologies in Education; M) Information Technologies in Radiocommunications; and N) Technologies for Biomedical Applications.
Download or read book New Trends in Intelligent Software Methodologies Tools and Techniques written by H. Fujita and published by IOS Press. This book was released on 2018-09-18 with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge-based systems, fully integrated with software, have become essential enablers for both science and commerce. But current software methodologies, tools and techniques are not robust or reliable enough for the demands of a constantly changing and evolving market, and many promising approaches have proved to be no more than case-oriented methods that are not fully automated. This book presents the proceedings of the 17th international conference on New Trends in Intelligent Software Methodology, Tools and Techniques (SoMeT18) held in Granada, Spain, 26-28 September 2018. The SoMeT conferences provide a forum for the exchange of ideas and experience, foster new directions in software development methodologies and related tools and techniques, and focus on exploring innovations, controversies, and the current challenges facing the software engineering community. The 80 selected papers included here are divided into 13 chapters, and cover subjects as diverse as intelligent software systems; medical informatics and bioinformatics; artificial intelligence techniques; social learning software and sentiment analysis; cognitive systems and neural analytics; and security, among other things. Offering a state-of-the-art overview of methodologies, tools and techniques, this book will be of interest to all those whose work involves the development or application of software.
Download or read book Computer Safety Reliability and Security written by Stefano Tonetta and published by Springer. This book was released on 2017-09-01 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of five workshops co-located with SAFECOMP 2017, the 36th International Conference on Computer Safety, Reliability, and Security, held in Trento, Italy, in September 2017. The 38 revised full papers presented together with 5 introductory papers to each workshop, and three invited papers, were carefully reviewed and selected from 49 submissions. This year's workshops are: ASSURE 2017 – Assurance Cases for Software-Intensive Systems; DECSoS 2017 – ERCIM/EWICS/ARTEMIS Dependable Embedded and Cyber-Physical Systems and Systems-of-Systems; SASSUR 2017 – Next Generation of System Assurance Approaches for Safety-Critical Systems; TIPS 2017 – Timing Performance in Safety Engineering; TELERISE 2017 Technical and legal Aspects of Data Privacy and Security.
Download or read book Architecture of Computing Systems ARCS 2018 written by Mladen Berekovic and published by Springer. This book was released on 2018-04-05 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 31st International Conference on Architecture of Computing Systems, ARCS 2018, held in Braunschweig, Germany, in April 2018. The 23 full papers presented in this volume were carefully reviewed and selected from 53 submissions. ARCS has always been a conference attracting leading-edge research outcomes in Computer Architecture and Operating Systems, including a wide spectrum of topics ranging from embedded and real-time systems all the way to large-scale and parallel systems.
Download or read book Microwave Devices and Circuits for Advanced Wireless Communication written by Dilip Kumar Choudhary and published by CRC Press. This book was released on 2024-08-27 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of design and analysis of microwave devices and circuits for 5G and beyond wireless communication systems. It focuses on modern microwave antennas, filters, metamaterials, and MIMO systems. It includes a design approach based on Artificial Intelligence and the practical use of microwave devices and circuits in commercial, medical, and military applications. Microwave Devices and Circuits for Advanced Wireless Communications: Design and Analysis explores the performance of microwave devices and circuits by highlighting the difficulties encountered by researchers and designers such as latency, interoperability, wireless coexistence, data streaming, safety, security, and privacy. The book explores the most important aspects of antenna design, including radiation pattern control, impedance matching with bandwidth improvement, and gain enhancement. It also examines different categories of metasurfaces, including frequency-selective surfaces (FSS) and electromagnetic bandgap (EBG) structures, and their distinct roles in antenna design. Additionally, the book examines concepts such as ultra-wideband (UWB) radar for 5G millimeter wave applications, and advanced techniques such as synthetic aperture radar (SAR), beam-forming, compressed sensing, and diffraction tomography for enabling high-resolution imaging across wider application areas. The authors also present an overview on applying machine learning (ML) techniques to advanced wireless communication for signal-processing tasks such as signal denoising, equalization, and modulation recognition. They then discuss the potential significance of UAV communication systems in achieving seamless connection, quality of service (QoS), as well as the difficulties and potential remedies involved in building dependable networks using UAVs. Throughout the book the authors offer a critical assessment of the strengths and limitations of each topic and approach presented, thus providing valuable guidance for future research in this exciting field. This book will be helpful for graduate students, researchers, and engineers working in the area of design and reliability of circuits for microwave and communication systems.
Download or read book Model driven Development for Embedded Software written by Jean-Aime Maxa and published by Elsevier. This book was released on 2018-03-27 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model-driven Development for Embedded Software: Application to Communications for Drone Swarm describes the principles of model-oriented design used in the aeronautical field, specifically for the UAV (Unmanned Aerial Vehicle). The book focuses on designing an embedded system for drones to carry out ad hoc communication within a drone fleet. In this context, an original methodology for rapid prototyping of embedded systems is presented. This approach saves time for the verification and formal validation phases, contributing to certification of the Unmanned Aerial System (UAS). The book also addresses the more traditional verification phases that must be performed to verify accuracy of the system. This evaluation is carried out in simulation and by real experimentation. The various tools necessary for the implementation of this methodology are described to allow the reader to be able to implement independently. Finally, to illustrate the contribution of this original methodology, an example of embedded system development is presented in which the different phases of the methodology are explained to conceive, validate and test a new secure routing protocol developed for communications within a fleet of drones. Describes the principles of model-oriented design used in the aeronautical field Presents an original methodology of rapid prototyping of embedded systems Presents a mode of development for embedded systems in the different phases
Download or read book Optimization of Automated Software Testing Using Meta Heuristic Techniques written by Manju Khari and published by Springer Nature. This book was released on 2022-09-26 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides awareness of different evolutionary methods used for automatic generation and optimization of test data in the field of software testing. While the book highlights on the foundations of software testing techniques, it also focuses on contemporary topics for research and development. This book covers the automated process of testing in different levels like unit level, integration level, performance level, evaluation of testing strategies, testing in security level, optimizing test cases using various algorithms, and controlling and monitoring the testing process etc. This book aids young researchers in the field of optimization of automated software testing, provides academics with knowledge on the emerging field of AI in software development, and supports universities, research centers, and industries in new projects using AI in software testing. Supports the advancement in the artificial intelligence used in software development; Advances knowledge on artificial intelligence based metaheuristic approach in software testing; Encourages innovation in traditional software testing field using recent artificial intelligence. ·
Download or read book MMBnet 2017 written by Udo R. Krieger and published by University of Bamberg Press. This book was released on 2017-09-12 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: