Download or read book 2015 International Conference on Planarization CMP Technology ICPT written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 2015 International Conference on Planarization CMP Technology ICPT written by IEEE Staff and published by . This book was released on 2015-09-30 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: ICPT, as an international symposium for planarization CMP, is a magnificent opportunity to have discussions on technologies including FEOL and BEOL CMP, 3D TSV, Fundamentals of CMP, Polishing Processes, Consumables, Equipment, Green Devices, New Applicaitons, Metrology, Cleaning, Defect Control, CMP Alternatives, SiC, GaN, Sapphire and Diamond The conference provides a place where every relevant researcher and engineer can get together to discuss openly and exchange information widely Enthusiastic presentations and discussions are expected to be on an euqal footing, irrespective of the attendees countries of origin, organizations positions and technology areas the attendees belong to

Download or read book Abrasive Technology written by Anna Rudawska and published by BoD – Books on Demand. This book was released on 2018-10-24 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject matter of this book is the information on the abrasive technology methods, the characteristics of the methods (for example, the technological parameters, tools, and machines), innovative methods, characteristics of surface structure and surface properties after this type of mechanical process, and application in various industrial branches and other technical and technological domains. Abrasive technology is very important, for example, in precision component manufacturing and nano-technology devices. The aim of this book is to present information on the characteristics and applications of abrasive technology, abrasive tools, tests, and also the innovative methods of this technology. This information enables scientists, engineers, and designers to ensure the soundness and integrity of the fabricated components and to develop new techniques effectively.

Download or read book Processes at the Semiconductor Solution Interface 7 written by C. O'Dwyer and published by The Electrochemical Society. This book was released on 2017 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Silicon Wafer Cleaning Technology written by Karen Reinhardt and published by William Andrew. This book was released on 2018-03-16 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Silicon Wafer Cleaning Technology, Third Edition, provides an in-depth discussion of cleaning, etching and surface conditioning for semiconductor applications. The fundamental physics and chemistry associated with wet and plasma processing are reviewed, including surface and colloidal aspects. This revised edition includes the developments of the last ten years to accommodate a continually involving industry, addressing new technologies and materials, such as germanium and III-V compound semiconductors, and reviewing the various techniques and methods for cleaning and surface conditioning. Chapters include numerous examples of cleaning technique and their results. The book helps the reader understand the process they are using for their cleaning application and why the selected process works. For example, discussion of the mechanism and physics of contamination, metal, particle and organic includes information on particle removal, metal passivation, hydrogen-terminated silicon and other processes that engineers experience in their working environment. In addition, the handbook assists the reader in understanding analytical methods for evaluating contamination. The book is arranged in an order that segments the various cleaning techniques, aqueous and dry processing. Sections include theory, chemistry and physics first, then go into detail for the various methods of cleaning, specifically particle removal and metal removal, amongst others. - Focuses on cleaning techniques including wet, plasma and other surface conditioning techniques used to manufacture integrated circuits - Reliable reference for anyone that manufactures integrated circuits or supplies the semiconductor and microelectronics industries - Covers processes and equipment, as well as new materials and changes required for the surface conditioning process

Download or read book Chemical Mechanical Polishing 14 written by R. Rhoades and published by The Electrochemical Society. This book was released on 2016-09-21 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Chemical Mechanical Planarization CMP written by Babu Suryadevara and published by Woodhead Publishing. This book was released on 2021-09-10 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Chemical Mechanical Planarization (CMP), Second Edition provides the latest information on a mainstream process that is critical for high-volume, high-yield semiconductor manufacturing, and even more so as device dimensions continue to shrink. The second edition includes the recent advances of CMP and its emerging materials, methods, and applications, including coverage of post-CMP cleaning challenges and tribology of CMP. This important book offers a systematic review of fundamentals and advances in the area. Part one covers CMP of dielectric and metal films, with chapters focusing on the use of current and emerging techniques and processes and on CMP of various materials, including ultra low-k materials and high-mobility channel materials, and ending with a chapter reviewing the environmental impacts of CMP processes. New content addressed includes CMP challenges with tungsten, cobalt, and ruthenium as interconnect and barrier films, consumables for ultralow topography and CMP for memory devices. Part two addresses consumables and process control for improved CMP and includes chapters on CMP pads, diamond disc pad conditioning, the use of FTIR spectroscopy for characterization of surface processes and approaches for defection characterization, mitigation, and reduction. Advances in Chemical Mechanical Planarization (CMP), Second Edition is an invaluable resource and key reference for materials scientists and engineers in academia and R&D. - Reviews the most relevant techniques and processes for CMP of dielectric and metal films - Includes chapters devoted to CMP for current and emerging materials - Addresses consumables and process control for improved CMP, including post-CMP

Download or read book Chemistry and Industrial Techniques for Chemical Engineers written by Lionello Pogliani and published by CRC Press. This book was released on 2020-05-14 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Chemistry and Industrial Techniques for Chemical Engineers, brings together innovative research, new concepts, and novel developments in the application of new tools for chemical and materials engineers. It contains significant research, reporting new methodologies, and important applications in the fields of chemical engineering as well as the latest coverage of chemical databases and the development of new methods and efficient approaches for chemists. With clear explanations, real-world examples, this volume emphasizes the concepts essential to the practice of chemical science, engineering, and technology while introducing the newest innovations in the field.

Download or read book High Mobility Materials for CMOS Applications written by Nadine Collaert and published by Woodhead Publishing. This book was released on 2018-06-29 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Mobility Materials for CMOS Applications provides a comprehensive overview of recent developments in the field of (Si)Ge and III-V materials and their integration on Si. The book covers material growth and integration on Si, going all the way from device to circuit design. While the book's focus is on digital applications, a number of chapters also address the use of III-V for RF and analog applications, and in optoelectronics. With CMOS technology moving to the 10nm node and beyond, however, severe concerns with power dissipation and performance are arising, hence the need for this timely work on the advantages and challenges of the technology. - Addresses each of the challenges of utilizing high mobility materials for CMOS applications, presenting possible solutions and the latest innovations - Covers the latest advances in research on heterogeneous integration, gate stack, device design and scalability - Provides a broad overview of the topic, from materials integration to circuits

Download or read book Nanoelectronics written by Joachim Knoch and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-03-18 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, nanoelectronics has become very interdisciplinary requiring students to master aspects of physics, electrical engineering, chemistry etc. The 2nd edition of this textbook is a comprehensive overview of nanoelectronics covering the necessary quantum mechanical and solid-state physics foundation, an overview of semiconductor fabrication as well as a brief introduction into device simulation using the non-equilibrium Greens function formalism. Equipped with this, the work discusses nanoscale field-effect transistors and alternative device concepts such as Schottky-barrier MOSFETs as well as steep slope transistors based on different materials. In addition, cryogenic operation of MOSFETs for the realization of, e.g., classical control electronics of semiconducting spin qubits is studied. The work contains a number of tasks, examples and exercises with step-by-step video solutions as well as tutorial videos that deepen the understanding of the material. With additional access to simulation tools that allow students to do computational experiments, the emphasis is on thorough explanation of the material enabling students to carry out their own research.

Download or read book Semiconductor Manufacturing Handbook 2E PB written by Hwaiyu Geng and published by McGraw Hill Professional. This book was released on 2017-10-06 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly Revised, State-of-the-Art Semiconductor Design, Manufacturing, and Operations Information Written by 70 international experts and reviewed by a seasoned technical advisory board, this fully updated resource clearly explains the cutting-edge processes used in the design and fabrication of IC chips, MEMS, sensors, and other electronic devices. Semiconductor Manufacturing Handbook, Second Edition, covers the emerging technologies that enable the Internet of Things, the Industrial Internet of Things, data analytics, artificial intelligence, augmented reality, and and smart manufacturing. You will get complete details on semiconductor fundamentals, front- and back-end processes, nanotechnology, photovoltaics, gases and chemicals, fab yield, and operations and facilities. •Nanotechnology and microsystems manufacturing •FinFET and nanoscale silicide formation •Physical design for high-performance, low-power 3D circuits •Epitaxi, anneals, RTP, and oxidation •Microlithography, etching, and ion implantations •Physical, chemical, electrochemical, and atomic layer vapor deposition •Chemical mechanical planarization •Atomic force metrology •Packaging, bonding, and interconnects •Flexible hybrid electronics •Flat-panel,flexible display electronics, and photovoltaics •Gas distribution systems •Ultrapure water and filtration •Process chemicals handling and abatement •Chemical and slurry handling systems •Yield management, CIM, and factory automation •Manufacturing execution systems •Advanced process control •Airborne molecular contamination •ESD controls in clean-room environments •Vacuum systems and RF plasma systems •IC manufacturing parts cleaning technology •Vibration and noise design •And much more

Download or read book Chemical Mechanical Planarization of Microelectronic Materials written by Joseph M. Steigerwald and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Mechanical Planarization (CMP) plays an important role in today's microelectronics industry. With its ability to achieve global planarization, its universality (material insensitivity), its applicability to multimaterial surfaces, and its relative cost-effectiveness, CMP is the ideal planarizing medium for the interlayered dielectrics and metal films used in silicon integrated circuit fabrication. But although the past decade has seen unprecedented research and development into CMP, there has been no single-source reference to this rapidly emerging technology-until now. Chemical Mechanical Planarization of Microelectronic Materials provides engineers and scientists working in the microelectronics industry with unified coverage of both the fundamental mechanisms and engineering applications of CMP. Authors Steigerwald, Murarka, and Gutmann-all leading CMP pioneers-provide a historical overview of CMP, explain the various chemical and mechanical concepts involved, describe CMP materials and processes, review the latest scientific data on CMP worldwide, and offer examples of its uses in the microelectronics industry. They provide detailed coverage of the CMP of various materials used in the making of microcircuitry: tungsten, aluminum, copper, polysilicon, and various dielectric materials, including polymers. The concluding chapter describes post-CMP cleaning techniques, and most chapters feature problem sets to assist readers in developing a more practical understanding of CMP. The only comprehensive reference to one of the fastest growing integrated circuit manufacturing technologies, Chemical Mechanical Planarization of Microelectronic Materials is an important resource for research scientists and engineers working in the microelectronics industry. An indispensable resource for scientists and engineers working in the microelectronics industry Chemical Mechanical Planarization of Microelectronic Materials is the only comprehensive single-source reference to one of the fastest growing integrated circuit manufacturing technologies. It provides engineers and scientists who work in the microelectronics industry with unified coverage of both the fundamental mechanisms and engineering applications of CMP, including: * The history of CMP * Chemical and mechanical underpinnings of CMP * CMP materials and processes * Applications of CMP in the microelectronics industry * The CMP of tungsten, aluminum, copper, polysilicon, and various dielectrics, including polymers used in integrated circuit fabrication * Post-CMP cleaning techniques * Chapter-end problem sets are also included to assist readers in developing a practical understanding of CMP.

Download or read book Chemical Mechanical Planarization of Semiconductor Materials written by M.R. Oliver and published by Springer Science & Business Media. This book was released on 2004-01-26 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a comprehensive review of CMP (Chemical-Mechanical Planarization) technology, one of the most exciting areas in the field of semiconductor technology. It contains detailed discussions of all aspects of the technology, for both dielectrics and metals. The state of polishing models and their relation to experimental results are covered. Polishing tools and consumables are also covered. The leading edge issues of damascene and new dielectrics as well as slurryless technology are discussed.

Download or read book Microelectronic Applications of Chemical Mechanical Planarization written by Yuzhuo Li and published by John Wiley & Sons. This book was released on 2007-10-19 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative, systematic, and comprehensive description of current CMP technology Chemical Mechanical Planarization (CMP) provides the greatest degree of planarization of any known technique. The current standard for integrated circuit (IC) planarization, CMP is playing an increasingly important role in other related applications such as microelectromechanical systems (MEMS) and computer hard drive manufacturing. This reference focuses on the chemical aspects of the technology and includes contributions from the foremost experts on specific applications. After a detailed overview of the fundamentals and basic science of CMP, Microelectronic Applications of Chemical Mechanical Planarization: * Provides in-depth coverage of a wide range of state-of-the-art technologies and applications * Presents information on new designs, capabilities, and emerging technologies, including topics like CMP with nanomaterials and 3D chips * Discusses different types of CMP tools, pads for IC CMP, modeling, and the applicability of tribometrology to various aspects of CMP * Covers nanotopography, CMP performance and defect profiles, CMP waste treatment, and the chemistry and colloidal properties of the slurries used in CMP * Provides a perspective on the opportunities and challenges of the next fifteen years Complete with case studies, this is a valuable, hands-on resource for professionals, including process engineers, equipment engineers, formulation chemists, IC manufacturers, and others. With systematic organization and questions at the end of each chapter to facilitate learning, it is an ideal introduction to CMP and an excellent text for students in advanced graduate courses that cover CMP or related semiconductor manufacturing processes.

Download or read book Materials Integration written by Takashi Goto and published by Trans Tech Publications Ltd. This book was released on 2012-03-27 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the International Symposium of GCOE: Materials Integration in Conjunction with the 2nd International Symposium on Advanced Synthesis and Processing Technology for Materials (ASPT2011), KINKEN-WAKATE 2011, December 1-2, 2011, Sendai, Japan

Download or read book Oxidation of Tungsten written by Vincent David Barth and published by . This book was released on 1961 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report presents a detailed review of available information on the oxidation of W and its alloys. W is relatively inert below 700 C. As the temperature is increased above this level, however, oxidation becomes progressively more rapid, reaching catastrophic rates at temperatures around 1200 C and above. Various theories for the mechanism and rates of W oxidation at different temperatures are reviewed, and the effect of pressure and water vapor on the stability of W oxides is discussed in detail. The elevatedtemperature reactions of W with other materials, such as refractory oxides, and with gases other than oxygen also are covered. Information on the protection of W by alloying and coating is included. (Author).

Download or read book Handbook of Semiconductor Manufacturing Technology written by Yoshio Nishi and published by CRC Press. This book was released on 2017-12-19 with total page 3276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Retaining the comprehensive and in-depth approach that cemented the bestselling first edition's place as a standard reference in the field, the Handbook of Semiconductor Manufacturing Technology, Second Edition features new and updated material that keeps it at the vanguard of today's most dynamic and rapidly growing field. Iconic experts Robert Doering and Yoshio Nishi have again assembled a team of the world's leading specialists in every area of semiconductor manufacturing to provide the most reliable, authoritative, and industry-leading information available. Stay Current with the Latest Technologies In addition to updates to nearly every existing chapter, this edition features five entirely new contributions on... Silicon-on-insulator (SOI) materials and devices Supercritical CO2 in semiconductor cleaning Low-κ dielectrics Atomic-layer deposition Damascene copper electroplating Effects of terrestrial radiation on integrated circuits (ICs) Reflecting rapid progress in many areas, several chapters were heavily revised and updated, and in some cases, rewritten to reflect rapid advances in such areas as interconnect technologies, gate dielectrics, photomask fabrication, IC packaging, and 300 mm wafer fabrication. While no book can be up-to-the-minute with the advances in the semiconductor field, the Handbook of Semiconductor Manufacturing Technology keeps the most important data, methods, tools, and techniques close at hand.