Download or read book Acute Exposure Guideline Levels for Selected Airborne Chemicals written by National Research Council and published by National Academies Press. This book was released on 2014-05-27 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extremely hazardous substances can be released accidentally as a result of chemical spills, industrial explosions, fires, or accidents involving railroad cars and trucks transporting EHSs. Workers and residents in communities surrounding industrial facilities where these substances are manufactured, used, or stored and in communities along the nation's railways and highways are potentially at risk of being exposed to airborne EHSs during accidental releases or intentional releases by terrorists. Pursuant to the Superfund Amendments and Reauthorization Act of 1986, the U.S. Environmental Protection Agency (EPA) has identified approximately 400 EHSs on the basis of acute lethality data in rodents. Acute Exposure Guideline Levels for Selected Airborne Chemicals, Volume 17 identifies, reviews, and interprets relevant toxicologic and other scientific data for selected AEGL documents for acrylonitrile, carbon tetrachloride, cyanogen, epichlorohydrin, ethylene chlorohydrin, toluene, trimethylacetyl chloride, hydrogen bromide, and boron tribromide in order to develop acute exposure guideline levels (AEGLs) for these high-priority, acutely toxic chemicals. AEGLs represent threshold exposure limits (exposure levels below which adverse health effects are not likely to occur) for the general public and are applicable to emergency exposures ranging from 10 minutes (min) to 8 h. Three levels - AEGL-1, AEGL-2, and AEGL-3 - are developed for each of five exposure periods (10 min, 30 min, 1 h, 4 h, and 8 h) and are distinguished by varying degrees of severity of toxic effects. This report will inform planning, response, and prevention in the community, the workplace, transportation, the military, and the remediation of Superfund sites.

Download or read book Human Thermal Environments written by Ken Parsons and published by CRC Press. This book was released on 2014-04-09 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the ten years since the publication of the second edition of Human Thermal Environments: The Effects of Hot, Moderate, and Cold Environments on Human Health, Comfort, and Performance, Third Edition, the world has embraced electronic communications, making international collaboration almost instantaneous and global. However, there is still a need for a compilation of up-to-date information and best practices. Reflecting current changes in theory and applications, this third edition of a bestseller continues to be the standard text for the design of environments for humans to live and work safely, comfortably, and effectively, and for the design of materials that help people cope with their environments. See What’s New in the Third Edition: All existing chapters significantly updated Five new chapters Testing and development of clothing Adaptive models Thermal comfort for special populations Thermal comfort for special environments Extreme environments Weather Outdoor environments and climate change Fun runs, cold snaps, and heat waves The book covers hot, moderate, and cold environments, and defines them in terms of six basic parameters: air temperature, radiant temperature, humidity, air velocity, clothing worn, and the person’s activity. It focuses on the principles and practice of human response, which incorporates psychology, physiology, and environmental physics with applied ergonomics. The text then discusses water requirements, computer modeling, computer-aided design, and current standards. A systematic treatment of thermal environments and how they affect humans in real-world applications, the book links the health and engineering aspects of the built environment. It provides you with updated tools, techniques, and methods for the design of products and environments that achieve thermal comfort.

Download or read book Principles of Occupational Health and Hygiene written by Sue Reed and published by Routledge. This book was released on 2020-07-27 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Occupational Health and Hygiene offers a comprehensive overview of occupational health risks and hazardous environments encountered in a range of industries and organisational settings. Leading industry professionals and educators explain how to identify key workplace hazards including chemical agents such as dusts, metals and gases; physical agents such as noise, radiation and extremes of heat and cold; and microbiological agents. They outline assessment procedures and processes for identifying exposure levels. They also explain how to evaluate risk and follow safety guidelines to control and manage these hazards effectively. Chapters are heavily illustrated with detailed case studies, diagrams, flowcharts and photos. Practical guidelines are provided for managing each hazard type. This third edition has been extensively revised and updated and reflects current research evidence and the Workplace Health and Safety legislation on workplace hazards. Principles of Occupational Health and Hygiene is an essential reference for Occupational Hygienists and anyone in an Occupational Health and Safety role.

Download or read book Acute Exposure Guideline Levels for Selected Airborne Chemicals written by National Research Council and published by National Academies Press. This book was released on 2012-04-29 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the request of the Department of Defense and the Environmental Protection Agency, the National Research Council has reviewed the relevant scientific literature compiled by an expert panel and established Acute Exposure Guideline Levels (AEGLs) for several chemicals. AEGLs represent exposure levels below which adverse health effects are not likely to occur and are useful in responding to emergencies, such as accidental or intentional chemical releases in community, workplace, transportation, and military settings, and for the remediation of contaminated sites. Three AEGLs are approved for each chemical, representing exposure levels that result in: 1) notable but reversible discomfort; 2) long-lasting health effects; and 3) life-threatening health impacts. This volume in the series includes AEGLs for bis-chloromethyl ether, chloromethyl methyl ether, chlorosilanes, nitrogen oxides, and vinyl chloride.

Download or read book Patty s Toxicology 6 Volume Set written by Eula Bingham and published by John Wiley & Sons. This book was released on 2012-07-31 with total page 5872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring the improved format used in the 5th edition, this updated set presents, in logical groupings, comprehensive toxicological data for industrial compounds, including CAS numbers, physical and chemical properties, exposure limits, and biological tolerance values for occupational exposures, making it essential for toxicologists and industrial hygienists. This edition has about 40% new authors who have brought a new and international perspective to interpreting industrial toxicology, and discusses new subjects such as nanotechnology, flavorings and the food industry, reactive chemical control to comprehensive chemical policy, metalworking fluids, and pharmaceuticals.

Download or read book Hamilton and Hardy s Industrial Toxicology written by Raymond D. Harbison and published by John Wiley & Sons. This book was released on 2015-03-16 with total page 1368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a concise, yet comprehensive, reference on all aspectsof industrial exposures and toxicants; this book aidstoxicologists, industrial hygienists, and occupational physiciansto investigate workplace health problems. • Updates and expands coverage with new chapterscovering regulatory toxicology, toxicity testing, physical hazards,high production volume (HPV) chemicals, and workplace druguse • Includes information on occupational and environmentalsources of exposure, mammalian toxicology, industrial hygiene,medical management and ecotoxicology • Retains a succinct chapter format that has become thehallmark for the previous editions • Distils a vast amount of information into one resourcefor both academics and professionals

Download or read book Handbook of Loss Prevention Engineering written by Joel M. Haight and published by John Wiley & Sons. This book was released on 2013-03-19 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt: Loss prevention engineering describes all activities intended to help organizations in any industry to prevent loss, whether it be through injury, fire, explosion, toxic release, natural disaster, terrorism or other security threats. Compared to process safety, which only focusses on preventing loss in the process industry, this is a much broader field. Here is the only one-stop source for loss prevention principles, policies, practices, programs and methodology presented from an engineering vantage point. As such, this handbook discusses the engineering needs for manufacturing, construction, mining, defense, health care, transportation and quantification, covering the topics to a depth that allows for their functional use while providing additional references should more information be required. The reference nature of the book allows any engineers or other professionals in charge of safety concerns to find the information needed to complete their analysis, project, process, or design.

Download or read book Exposure Assessment and Safety Considerations for Working with Engineered Nanoparticles written by Michael J. Ellenbecker and published by John Wiley & Sons. This book was released on 2015-06-26 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses health and safety issues associated with workplace Nanoparticle exposures • Describes methods to evaluate and control worker exposures to engineered nanoparticles • Provides guidance for concerned EHS professionals on acceptable levels of exposure to nanoparticles • Includes documentation on best practices to be followed by all researchers when working with engineered nanoparticles • Describes current knowledge on toxicity of nanoparticles • Includes coverage on Routes of Exposure for Engineered Nanoparticles

Download or read book Inhalation Toxicology Third Edition written by Harry Salem and published by CRC Press. This book was released on 2014-08-19 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: The lungs provide a significant opportunity for the introduction of both therapeutic and toxic chemicals into the human body. In occupational and domestic environments, hazardous chemicals can enter the body through the lungs via gases, aerosols, and particulates from natural and anthropogenic sources. Fully updated with new research and discoveries since the last edition, Inhalation Toxicology, Third Edition presents contributions from internationally recognized scientists in the academic, commercial/industrial, and governmental sectors. A pragmatic resource for practicing professionals and students, the book comprehensively examines the relationship between the respiratory system and the toxicology of inhaled substances. Topics include: Regulatory aspects of exposure and testing Testing equipment and procedures Respiratory allergy and irritation of the respiratory tract Risk assessment Toxicology theory Toxicology modeling Toxic effects of some individual toxicants New topics in this third edition include collection and characterization of airborne particulate matter, the inhalation toxicology of asbestos fibers and nanoparticles, and the development of lung-on-a-chip technology for predicting in vivo responses. Each chapter concludes with thought-provoking questions and answers, enhancing the book’s educational utility.

Download or read book The Construction Chart Book written by CPWR--The Center for Construction Research and Training and published by Cpwr - The Center for Construction Research and Training. This book was released on 2008 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Construction Chart Book presents the most complete data available on all facets of the U.S. construction industry: economic, demographic, employment/income, education/training, and safety and health issues. The book presents this information in a series of 50 topics, each with a description of the subject matter and corresponding charts and graphs. The contents of The Construction Chart Book are relevant to owners, contractors, unions, workers, and other organizations affiliated with the construction industry, such as health providers and workers compensation insurance companies, as well as researchers, economists, trainers, safety and health professionals, and industry observers.

Download or read book Oxford Textbook of Global Public Health written by Roger Detels and published by Oxford University Press. This book was released on 2017 with total page 1717 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sixth edition of the hugely successful, internationally recognised textbook on global public health and epidemiology, with 3 volumes comprehensively covering the scope, methods, and practice of the discipline

Download or read book PPI PE Environmental Review eText 1 Year written by Michael R. Lindeburg and published by Simon and Schuster. This book was released on 2019-01-07 with total page 2753 pages. Available in PDF, EPUB and Kindle. Book excerpt: You need this book for your CBT preparation! The PE Environmental CBT exam is NOT open book. You will only be allowed to use the NCEES supplied electronic reference on the exam. Ensure exam day success with the new PE Environmental Review from Michael R. Lindeburg, PE. PE Environmental Review offers the complete review for the new NCEES Environmental PE CBT exam. This book is the most up-to-date, comprehensive reference manual available, and is designed to the exact order of the exam. Topics Covered Water: Principles, Wastewater, Stormwater, Potable Water, Water Resources Air: Principles, Pollution Control Solid and Hazardous Waste: Principles, Municipal and Industrial Solid Waste, Hazardous, Medical, and Radioactive Waste Site Assessment and Remediation Environmental Health and Safety Associated Engineering Principles About the Exam The NCEES PE Environmental CBT Exam is a 9-hour computer-based exam. It is closed book with an electronic reference. Examinees have 9 hours to complete the 80 question exam. The 9-hour time includes a tutorial and optional break. This exam uses both the International System of units (SI) and the US Customary System (USCS). Key Features: Easy to find content organized in same order as the exam Use of NCEES Handbook equations, tables, and figures Teaching of how to solve exam problems with specific NCEES Handbook equations Industry-standard terminology and nomenclature Equal support of U.S. customary and SI units Binding: Paperback Publisher: PPI, A Kaplan Company After you Pass Your PE Environmental Review will serve as an invaluable reference throughout your environmental engineering career.

Download or read book Energy Performance in the Australian Built Environment written by Priyadarsini Rajagopalan and published by Springer. This book was released on 2018-07-11 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines energy efficiency in the Australian built environment and presents current developments with a particular focus on the temperate setting of Victoria state. It is divided into four main parts discussing policies, climate, and carbon footprint and presenting case studies on the energy performance and indoor environmental quality of various building types. The book is intended for readers wanting to understand the various policies related to different buildings types and their energy performance.

Download or read book Safe Work Practices for Wastewater Treatment Plants written by Frank R. Spellman and published by CRC Press. This book was released on 2018-10-08 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details how to start and maintain a successful safety program in a municipal or industrial water or wastewater plant with special emphasis on the practical implementation. This new edition provides the latest OSHA regulations and recommendations, and each chapter has been updated with new information, including the latest innovations related to all types of successfully proven health and safety protocols. Coverage includes safety programs, recordkeeping, safety training, safety equipment, and safe work practices for wastewater treatment facilities. In addition, much of the text should be relevant to safety and health professionals in almost any industrial setting.

Download or read book Niosh Criteria for a Recommended Standard Occupational Exposure to Heat and Hot Environments written by National Institute for Occupational Safety and Health (U.S.) and published by National Institute on Drug Abuse. This book was released on 2018-08-03 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Occupational exposure to heat can result in injuries, disease, reduced productivity, and death. To address this hazard, the National Institute for Occupational Safety and Health (NIOSH) has evaluated the scientific data on heat stress and hot environments and has updated the Criteria for a Recommended Standard: Occupational Exposure to Hot Environments [NIOSH 1986a]. This updated guidance includes information about physiological changes that result from heat stress, and relevant studies such as those on caffeine use, evidence to redefine heat stroke, and more. Related products: Weather & Climate collection is available here: https://bookstore.gpo.gov/catalog/weather-climate Emergency Management & First Responders can be found here: https://bookstore.gpo.gov/catalog/emergency-management-first-responders Fire Management collection is available here: https://bookstore.gpo.gov/catalog/fire-management

Download or read book Advances in Clinical Chemistry written by Gregory S. Makowski and published by Academic Press. This book was released on 2021-11-23 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Clinical Chemistry, Volume 105, the latest installment in this internationally acclaimed series, contains chapters authored by world-renowned clinical laboratory scientists, physicians and research scientists. The serial discusses the latest and most up-to-date technologies related to the field of clinical chemistry, with this new release focusing on IgG N-glycans, Extracellular Vesicles: Potential Impact on Cardiovascular Diseases, Advances in Bone Turnover Markers, Matrix Metalloproteinases and Tissue Inhibitors of Matrix Metalloproteinases in Kidney Disease, and The Prothrombotic State in Cancer. - Provides the most up-to-date technologies in clinical chemistry and clinical laboratory science - Authored by world renowned clinical laboratory scientists, physicians and research scientists - Presents the international benchmark for novel analytical approaches in the clinical laboratory

Download or read book Ergonomic Workplace Design for Health Wellness and Productivity written by Alan Hedge and published by CRC Press. This book was released on 2016-08-05 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Even with today’s mobile technology, most work is still undertaken in a physical workplace. Today’s workplaces need to be healthy environments that minimize the risks of illnesses or injuries to occupants to compete in the marketplace. This necessitates the application of good ergonomics design principles to the creation of effective workplaces, and this is the focus of this book. This book will: · Focus on ergonomic design for better health and ergonomic design for better productivity · Presents environments that support new ways of working and alternative workplace strategies, as well as the impacts of new technologies · Covers the role of ergonomics design in creating sustainable workplaces · Includes ergonomics design for a wide variety of workplaces, from offices to hospitals, to hotels to vehicles, etc... · Shows the design principles on how to design and create a healthy and productive workplace The market lacks an ergonomics design book that covers the topics that this book will cover. This book summarizes design principles for practitioners, and applies them to the variety of workplace settings described in the book. No other book currently on the market does that.