Download or read book 2010 DOE Hydrogen Program Annual Merit Review and Peer Evaluation Report written by and published by . This book was released on 2010 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report summarizes comments from the Peer Review Panel at the 2010 DOE Hydrogen Program Annual Merit Review, held on June 7-11, 2010, in Washington, DC. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R & D; technology validation; safety, codes, and standards; education; and systems analysis.
Download or read book Hydrogen Science and Engineering written by Detlef Stolten and published by John Wiley & Sons. This book was released on 2016-01-04 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by 50 top academic, government and industry researchers, this handbook explores mature, evolving technologies for a clean, economically viable alternative to non-renewable energy. In so doing, it also discusses such broader topics as the environmental impact, education, safety and regulatory developments. The text is all-encompassing, covering a wide range that includes hydrogen as an energy carrier, hydrogen for storage of renewable energy, and incorporating hydrogen technologies into existing technologies.
Download or read book Hydrogen and Fuel Cells written by International Energy Agency and published by Simon and Schuster. This book was released on 2004 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen and fuel cells are vital technologies to ensure a secure and CO2-free energy future. Their development will take decades of extensive public and private effort to achieve technology breakthroughs and commercial maturity. Government research programs are indispensable for catalyzing the development process. This report maps the IEA countries' current efforts to research, develop and deploy the interlocking elements that constitute a "hydrogen economy", including CO2 capture and storage when hydrogen is produced out of fossil fuels. It provides an overview of what is being done, and by whom, covering an extensive complexity of national government R & D programs. The survey highlights the potential for exploiting the benefits of the international cooperation. This book draws primarily upon information contributed by IEA governments. In virtually all the IEA countries, important R & D and policy efforts on hydrogen and fuel cells are in place and expanding. Some are fully-integrated, government-funded programs, some are a key element in an overall strategy spread among multiple public and private efforts. The large amount of information provided in this publication reflects the vast array of technologies and logistics required to build the "hydrogen economy."--Publisher description.
Download or read book Energy and Water Development Appropriations for 2010 written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 2009 with total page 1662 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diesel Emissions and Their Control 2nd Edition written by W. Addy Majewski and published by SAE International. This book was released on 2023-12-20 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers, applied scientists, students, and individuals working to reduceemissions and advance diesel engine technology will find the secondedition of Diesel Emissions and Their Control to be an indispensablereference. Whether readers are at the outset of their learning journey orseeking to deepen their expertise, this comprehensive reference bookcaters to a wide audience.In this substantial update to the 2006 classic, the authors have expandedthe coverage of the latest emission technologies. With the industryevolving rapidly, the book ensures that readers are well-informed aboutthe most recent advances in commercial diesel engines, providing acompetitive edge in their respective fields. The second edition has alsostreamlined the content to focus on the most promising technologies.This book is rooted in the wealth of information available on DieselNet.com, where the “Technology Guide” papers offer in-depth insights. Eachchapter includes links to relevant online materials, granting readers accessto even more expertise and knowledge.The second edition is organized into six parts, providing a structuredjourney through every aspect of diesel engines and emissions control: Part I: A foundational exploration of the diesel engine, combustion, andessential subsystems. Part II: An in-depth look at emission characterization, health andenvironmental impacts, testing methods, and global regulations. Part III: A comprehensive overview of diesel fuels, covering petroleumdiesel, alternative fuels, and engine lubricants. Part IV: An exploration of engine efficiency and emission controltechnologies, from exhaust gas recirculation to engine control. Part V: The latest developments in diesel exhaust aftertreatment,encompassing catalyst technologies and particulate filters. Part VI: A historical journey through the evolution of dieselengine technology, with a focus on heavy-duty engines in the NorthAmerican market. (ISBN 9781468605693, ISBN 9781468605709, ISBN 9781468605716, DOI: 10.4271/9781468605709)
Download or read book 2009 DOE Hydrogen Program Annual Merit Review and Peer Evaluation Report written by and published by . This book was released on 2009 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report summarizes comments from the Peer Review Panel at the 2009 DOE Hydrogen Program Annual Merit Review, held on May 18-22, 2009, in Arlington, Virginia. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; education; safety, codes, and standards; technology validation; systems analysis; and manufacturing R & D.
Download or read book Review of the Research Program of the FreedomCAR and Fuel Partnership written by National Research Council and published by National Academies Press. This book was released on 2010-11-23 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: The public-private partnership to develop vehicles that require less petroleum-based fuel and emit fewer greenhouse gases should continue to include fuel cells and other hydrogen technologies in its research and development portfolio. The third volume in the FreedomCAR series states that, although the partnership's recent shift of focus toward technologies that could be ready for use in the nearer term-such as advanced combustion engines and plug-in electric vehicles-is warranted, R&D on hydrogen and fuel cells is also needed given the high costs and challenges that many of the technologies must overcome before widespread use. The FreedomCAR (Cooperative Automotive Research) and Fuel Partnership is a research collaboration among the U.S. Department of Energy, the United States Council for Automotive Research - whose members are the Detroit automakers-five major energy companies, and two electric utility companies. The partnership seeks to advance the technologies essential for components and infrastructure for a full range of affordable, clean, energy efficient cars and light trucks. Until recently, the program primarily focused on developing technologies that would allow U.S. automakers to make production and marketing decisions by 2015 on hydrogen fuel cell-powered vehicles. These vehicles have the potential to be much more energy-efficient than conventional gasoline-powered vehicles, produce no harmful tailpipe emissions, and significantly reduce petroleum use. In 2009, the partnership changed direction and stepped up efforts to advance, in the shorter term, technologies for reducing petroleum use in combustion engines, including those using biofuels, as well as batteries that could be used in plug-in hybrid-electric or all electric vehicles.
Download or read book Carbon Fiber written by Pratima Bajpai and published by Elsevier. This book was released on 2020-11-25 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Fiber, Second Edition, brings together available information on the production, properties, application and future of carbon fibers. This book will be of interest to those involved in the investigation of carbon fiber, carbon fiber manufacturing, and users. In addition, the recycling of carbon fiber reinforced polymers and the manufacturing of composites from recycled carbon fiber reinforced polymers are discussed. The book offers in-depth coverage on the production of carbon fiber and the global carbon fiber market, demand and major growth drivers. Carbon structures from biowaste, waste lignin and novel processes to obtain high purity lignin are presented, along with future directions. - Provides thorough and in-depth coverage of carbon fiber production - Presents the global carbon fiber market, demand and major growth drivers - Covers carbon structures from biowaste and waste lignin - Discusses novel process to obtain high purity lignin - Includes discussions of future directions for the carbon fiber industry
Download or read book Carbon Fibre from Lignin written by Pratima Bajpai and published by Springer. This book was released on 2017-03-20 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents detailed information on the production and properties of carbon fibers derived from lignin precursors. Focusing on future directions in the carbon fiber industry, it also introduces a novel process for obtaining high-purity lignin, a key aspect in the manufacture of high-quality carbon fiber. Carbon fiber is currently the most preferred lightweight manufacturing material and is rapidly becoming the material of choice for manufacturers around the world. Although more than 80% of commercial carbon fiber is estimated to use PAN (polyacrylonitrile) as a precursor, carbon fiber manufactured from PAN is expensive and therefore its application is limited to high-performance structural materials. Lignin is the second most abundant biopolymer in nature after cellulose and offers a carbon-rich, renewable resource. As a byproduct of the pulp and paper industry and the production of cellulosic ethanol, lignin is also available at low cost, making it an economically attractive alternative to PAN for the production of carbon fibers, as highlighted in this book. The information presented will be of interest to all those involved in the investigation of carbon fiber materials, carbon fiber manufacturers and carbon fiber users.
Download or read book Energy and Water Development Appropriations for 2011 Dept of Energy fiscal year 2011 justifications written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 2010 with total page 1732 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PEM Fuel Cells written by Gurbinder Kaur and published by Elsevier. This book was released on 2021-11-16 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: PEM Fuel Cells: Fundamentals, Advanced Technologies, and Practical Application provides a comprehensive introduction to the principles of PEM fuel cell, their working condition and application, and the latest breakthroughs and challenges for fuel cell technology. Each chapter follows a systematic and consistent structure with clear illustrations and diagrams for easy understanding. The opening chapters address the basics of PEM technology; stacking and membrane electrode assembly for PEM, degradation mechanisms of electrocatalysts, platinum dissolution and redeposition, carbon-support corrosion, bipolar plates and carbon nanotubes for the PEM, and gas diffusion layers. Thermodynamics, operating conditions, and electrochemistry address fuel cell efficiency and the fundamental workings of the PEM. Instruments and techniques for testing and diagnosis are then presented alongside practical tests. Dedicated chapters explain how to use MATLAB and COMSOL to conduct simulation and modeling of catalysts, gas diffusion layers, assembly, and membrane. Degradation and failure modes are discussed in detail, providing strategies and protocols for mitigation. High-temperature PEMs are also examined, as are the fundamentals of EIS. Critically, the environmental impact and life cycle of the production and storage of hydrogen are addressed, as are the risk and durability issues of PEMFC technology. Dedicated chapters are presented on the economics and commercialization of PEMFCs, including discussion of installation costs, initial capital costs, and the regulatory frameworks; apart from this, there is a separate chapter on their application to the automotive industry. Finally, future challenges and applications are considered. PEM Fuel Cells: Fundamentals, Advanced Technologies, and Practical Application provides an in-depth and comprehensive reference on every aspect of PEM fuel cells fundamentals, ideal for researchers, graduates, and students. - Presents the fundamentals of PEM fuel cell technology, electrolytes, membranes, modeling, conductivity, recent trends, and future applications - Addresses commercialization, public policy, and the environmental impacts of PEMFC in dedicated chapters - Presents state-of-the-art PEMFC research alongside the underlying concepts
Download or read book Reducing Fuel Consumption and Greenhouse Gas Emissions of Medium and Heavy Duty Vehicles Phase Two written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-05-15 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medium- and heavy-duty trucks, motor coaches, and transit buses - collectively, "medium- and heavy-duty vehicles", or MHDVs - are used in every sector of the economy. The fuel consumption and greenhouse gas emissions of MHDVs have become a focus of legislative and regulatory action in the past few years. This study is a follow-on to the National Research Council's 2010 report, Technologies and Approaches to Reducing the Fuel Consumption of Medium-and Heavy-Duty Vehicles. That report provided a series of findings and recommendations on the development of regulations for reducing fuel consumption of MHDVs. On September 15, 2011, NHTSA and EPA finalized joint Phase I rules to establish a comprehensive Heavy-Duty National Program to reduce greenhouse gas emissions and fuel consumption for on-road medium- and heavy-duty vehicles. As NHTSA and EPA began working on a second round of standards, the National Academies issued another report, Reducing the Fuel Consumption and Greenhouse Gas Emissions of Medium- and Heavy-Duty Vehicles, Phase Two: First Report, providing recommendations for the Phase II standards. This third and final report focuses on a possible third phase of regulations to be promulgated by these agencies in the next decade.
Download or read book Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance written by Richard Folkson and published by Elsevier. This book was released on 2014-03-19 with total page 803 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most vehicles run on fossil fuels, and this presents a major emissions problem as demand for fuel continues to increase. Alternative Fuels and Advanced Vehicle Technologies gives an overview of key developments in advanced fuels and vehicle technologies to improve the energy efficiency and environmental impact of the automotive sector. Part I considers the role of alternative fuels such as electricity, alcohol, and hydrogen fuel cells, as well as advanced additives and oils, in environmentally sustainable transport. Part II explores methods of revising engine and vehicle design to improve environmental performance and fuel economy. It contains chapters on improvements in design, aerodynamics, combustion, and transmission. Finally, Part III outlines developments in electric and hybrid vehicle technologies, and provides an overview of the benefits and limitations of these vehicles in terms of their environmental impact, safety, cost, and design practicalities. Alternative Fuels and Advanced Vehicle Technologies is a standard reference for professionals, engineers, and researchers in the automotive sector, as well as vehicle manufacturers, fuel system developers, and academics with an interest in this field. - Provides a broad-ranging review of recent research into advanced fuels and vehicle technologies that will be instrumental in improving the energy efficiency and environmental impact of the automotive sector - Reviews the development of alternative fuels, more efficient engines, and powertrain technologies, as well as hybrid and electric vehicle technologies
Download or read book U S Department of Energy Hydrogen Program 2022 Annual Merit Review and Peer Evaluation Report June 6 8 2022 written by and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document summarizes peer review comments and scores for the U.S. Department of Energy (DOE) Hydrogen Program 2022 Annual Merit Review and Peer Evaluation Meeting (AMR), held virtually June 6-8, 2022. The report also provides a brief overview of the Program, highlights key accomplishments since the previous AMR (held in June 2021), and summarizes activities and accomplishments within each Program office. Five Hydrogen and Fuel Cell Technologies Office subprogram chapters provide summaries of key activities and accomplishments since the preceding AMR, summaries of projects presented orally during this year's AMR, and a summary of peer reviewer comments on the subprogram.
Download or read book Hydrogen Energy and Fuel Cells written by European Commission. Directorate General for Research and published by . This book was released on 2003 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Electrolyte Fuel Cells 15 PEFC 15 written by H. A. Gasteiger and published by The Electrochemical Society. This book was released on 2015 with total page 1391 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrogen Energy written by Lalit Mohan Das and published by John Wiley & Sons. This book was released on 2024-03-04 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: HYDROGEN ENERGY Comprehensive resource exploring integrated hydrogen technology with guidance for developing practical operating systems Hydrogen Energy presents all-inclusive knowledge on hydrogen production and storage to enable readers to design guidelines for its production, storage, and applications, addressing the recent renewed interest in hydrogen energy to manage the global energy crisis and discussing the electrochemical potential of hydrogen in transportation and fuel cells. Written by a highly qualified author, Hydrogen Energy explores sample topics such as: Essentials of hydrogen energy, such as its occurrence, physico-chemical properties, production, transmission, delivery, storage, and utilization Technology of hydrogen utilization in the land transport sector, such as automobiles, as well as other modes of transport, like marine and air Combustion characteristics and environmental pollution features, internal combustion engines, and fuel cells Guidelines to design prototype systems, covering their safety, hydrogen induced damages and life cycle analysis Providing in-depth coverage of the subject, Hydrogen Energy is an ideal resource for researchers and professionals working towards developing time-bound goal-oriented hydrogen-based programs in the chemical, automobile, power, and process engineering sectors.
