Download or read book 2009 IEEE Control Applications CCA Intelligent Control ISIC written by Control Systems Society and published by . This book was released on 2009 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 2009 IEEE Control Applications 2009 CCA Intelligent Control ISIC written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robust and Intelligent Control of a Typical Underactuated Robot written by Jian Huang and published by Springer Nature. This book was released on 2023-02-09 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the achievements of the author's team in the research of a special underactuated system called mobile wheeled inverted pendulum (MWIP) developed over recent years. It focuses on a combination of theory and practice, and almost all algorithms are verified on the real MWIP system. Taking the dynamic modeling, control, and simulation as the mainline, this book first introduces the particularity, control challenges, and applications of the MWIP system. Then, Lagrange function is adopted to model the dynamics of two-dimensional and three-dimensional MWIP systems. Then, based on the special characteristics of the MWIP’s dynamics, a new high-order disturbance observer is designed, and a control strategy is proposed by combining the high-order disturbance observer with a novel design of sliding mode manifold. Furthermore, several methods to overcome the chattering problem of the traditional sliding mode control are presented in detail. Besides, some intelligent algorithms related to the interval type-2 fuzzy logic control are applied to the MWIP system. Finally, the future development of underactuated robot has been prospected.This book is intended for researchers and engineers in robotics and control. It can also be used as supplementary reading for nonlinear systems theory at the graduate level. The in-depth theory and detailed platform construction provide an excellent convenience for readers to build their platforms and learn the knowledge they need.

Download or read book New Perspectives and Applications of Modern Control Theory written by Julio B. Clempner and published by Springer. This book was released on 2017-09-30 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited monograph contains research contributions on a wide range of topics such as stochastic control systems, adaptive control, sliding mode control and parameter identification methods. The book also covers applications of robust and adaptice control to chemical and biotechnological systems. This collection of papers commemorates the 70th birthday of Dr. Alexander S. Poznyak.

Download or read book Extremum Seeking Control and Applications written by Chunlei Zhang and published by Springer Science & Business Media. This book was released on 2011-10-26 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extremum-seeking control tracks a varying maximum or minimum in a performance function such as output or cost. It attempts to determine the optimal performance of a control system as it operates, thereby reducing downtime and the need for system analysis. Extremum-seeking Control and Applications is divided into two parts. In the first, the authors review existing analog-optimization-based extremum-seeking control including gradient-, perturbation- and sliding-mode-based control designs. They then propose a novel numerical-optimization-based extremum-seeking control based on optimization algorithms and state regulation. This control design is developed for simple linear time-invariant systems and then extended for a class of feedback linearizable nonlinear systems. The two main optimization algorithms – line search and trust region methods – are analyzed for robustness. Finite-time and asymptotic state regulators are put forward for linear and nonlinear systems respectively. Further design flexibility is achieved using the robustness results of the optimization algorithms and the asymptotic state regulator by which existing nonlinear adaptive control techniques can be introduced for robust design. The approach used is easier to implement and tends to be more robust than those that use perturbation-based extremum-seeking control. The second part of the book deals with a variety of applications of extremum-seeking control: a comparative study of extremum-seeking control schemes in antilock braking system design; source seeking, formation control, collision and obstacle avoidance for groups of autonomous agents; mobile radar networks; and impedance matching. MATLAB®/Simulink® code which can be downloaded from www.springer.com/ISBN helps readers to reproduce the results presented in the text and gives them a head start for implementing the algorithms in their own applications. Extremum-seeking Control and Applications will interest academics and graduate students working in control, and industrial practitioners from a variety of backgrounds: systems, automotive, aerospace, communications, semiconductor and chemical engineering.

Download or read book Algorithms and Architectures for Parallel Processing written by Sheng Wen and published by Springer Nature. This book was released on 2020-01-21 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set LNCS 11944-11945 constitutes the proceedings of the 19th International Conference on Algorithms and Architectures for Parallel Processing, ICA3PP 2019, held in Melbourne, Australia, in December 2019. The 73 full and 29 short papers presented were carefully reviewed and selected from 251 submissions. The papers are organized in topical sections on: Parallel and Distributed Architectures, Software Systems and Programming Models, Distributed and Parallel and Network-based Computing, Big Data and its Applications, Distributed and Parallel Algorithms, Applications of Distributed and Parallel Computing, Service Dependability and Security, IoT and CPS Computing, Performance Modelling and Evaluation.

Download or read book Modeling and Control of Static Converters for Hybrid Storage Systems written by Fekik, Arezki and published by IGI Global. This book was released on 2021-09-17 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: The energy transition initiated in recent years has enabled the growing integration of renewable production into the energy mix. Microgrids make it possible to maximize the efficiency of energy transmission from source to consumer by bringing the latter together geographically and by reducing losses linked to transport. However, the lack of inertia and the micro-grid support system makes it weak, and energy storage is necessary to ensure its proper functioning. Current storage technologies do not make it possible to provide both a large capacity of energy and power at the same time. Hybrid storage is a solution that combines the advantages of several technologies and reduces their disadvantages. Modeling and Control of Static Converters for Hybrid Storage Systems covers the modeling, control theorems, and optimization techniques that solve many scientific problems for researchers in the field of power converter control for renewable energy hybrid storage and places particular emphasis on the modeling and control of static converters for hybrid storage systems. Covering topics ranging from energy storage to power generation, this book is ideal for automation engineers, electrical engineers, mechanical engineers, professionals, scientists, academicians, master's and doctoral students, and researchers in the disciplines of electrical and mechanical engineering.

Download or read book Hybrid Systems Optimal Control and Hybrid Vehicles written by Thomas J. Böhme and published by Springer. This book was released on 2017-02-01 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assembles new methods showing the automotive engineer for the first time how hybrid vehicle configurations can be modeled as systems with discrete and continuous controls. These hybrid systems describe naturally and compactly the networks of embedded systems which use elements such as integrators, hysteresis, state-machines and logical rules to describe the evolution of continuous and discrete dynamics and arise inevitably when modeling hybrid electric vehicles. They can throw light on systems which may otherwise be too complex or recondite. Hybrid Systems, Optimal Control and Hybrid Vehicles shows the reader how to formulate and solve control problems which satisfy multiple objectives which may be arbitrary and complex with contradictory influences on fuel consumption, emissions and drivability. The text introduces industrial engineers, postgraduates and researchers to the theory of hybrid optimal control problems. A series of novel algorithmic developments provides tools for solving engineering problems of growing complexity in the field of hybrid vehicles. Important topics of real relevance rarely found in text books and research publications—switching costs, sensitivity of discrete decisions and there impact on fuel savings, etc.—are discussed and supported with practical applications. These demonstrate the contribution of optimal hybrid control in predictive energy management, advanced powertrain calibration, and the optimization of vehicle configuration with respect to fuel economy, lowest emissions and smoothest drivability. Numerical issues such as computing resources, simplifications and stability are treated to enable readers to assess such complex systems. To help industrial engineers and managers with project decision-making, solutions for many important problems in hybrid vehicle control are provided in terms of requirements, benefits and risks.

Download or read book Design of an Intelligent Embedded System for Condition Monitoring of an Industrial Robot written by Alaa Abdulhady Jaber and published by Springer. This book was released on 2016-09-08 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis introduces a successfully designed and commissioned intelligent health monitoring system, specifically for use on any industrial robot, which is able to predict the onset of faults in the joints of the geared transmissions. However the developed embedded wireless condition monitoring system leads itself very well for applications on any power transmission equipment in which the loads and speeds are not constant, and access is restricted. As such this provides significant scope for future development. Three significant achievements are presented in this thesis. First, the development of a condition monitoring algorithm based on vibration analysis of an industrial robot for fault detection and diagnosis. The combined use of a statistical control chart with time-domain signal analysis for detecting a fault via an arm-mounted wireless processor system represents the first stage of fault detection. Second, the design and development of a sophisticated embedded microprocessor base station for online implementation of the intelligent condition monitoring algorithm, and third, the implementation of a discrete wavelet transform, using an artificial neural network, with statistical feature extraction for robot fault diagnosis in which the vibration signals are first decomposed into eight levels of wavelet coefficients.

Download or read book CTI SYMPOSIUM 2019 written by Euroforum Deutschland GmbH and published by Springer Nature. This book was released on 2021-04-13 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every year, the international transmission and drive community meets up at the International CTI SYMPOSIA – automotive drivetrains, intelligent, electrified – in Germany, China and USA to discuss the best strategies and technologies for tomorrow’s cars, busses and trucks. From efficiency, comfort or costs to electrification, energy storage and connectivity, these premier industry meetings cover all the key issues in depth.

Download or read book Intelligent Information Processing XI written by Zhongzhi Shi and published by Springer Nature. This book was released on 2022-05-23 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 12th IFIP TC 12 International Conference on Intelligent Information Processing, IIP 2022, held in Qingdao, China, in July 2022. The 37 full papers and 6 short papers presented were carefully reviewed and selected from 57 submissions. They are organized in topical sections on Machine Learning, Data Mining, Multiagent Systems, Social Computing, Blockchain Technology, Game Theory and Emotion, Pattern Recognition, Image Processing and Applications.

Download or read book Nonlinear Filtering written by Kumar Pakki Bharani Chandra and published by Springer. This book was released on 2018-11-20 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives readers in-depth know-how on methods of state estimation for nonlinear control systems. It starts with an introduction to dynamic control systems and system states and a brief description of the Kalman filter. In the following chapters, various state estimation techniques for nonlinear systems are discussed, including the extended, unscented and cubature Kalman filters. The cubature Kalman filter and its variants are introduced in particular detail because of their efficiency and their ability to deal with systems with Gaussian and/or non-Gaussian noise. The book also discusses information-filter and square-root-filtering algorithms, useful for state estimation in some real-time control system design problems. A number of case studies are included in the book to illustrate the application of various nonlinear filtering algorithms. Nonlinear Filtering is written for academic and industrial researchers, engineers and research students who are interested in nonlinear control systems analysis and design. The chief features of the book include: dedicated coverage of recently developed nonlinear, Jacobian-free, filtering algorithms; examples illustrating the use of nonlinear filtering algorithms in real-world applications; detailed derivation and complete algorithms for nonlinear filtering methods, which help readers to a fundamental understanding and easier coding of those algorithms; and MATLAB® codes associated with case-study applications, which can be downloaded from the Springer Extra Materials website.

Download or read book Automotive Air Conditioning written by Quansheng Zhang and published by Springer. This book was released on 2016-08-10 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents research advances in automotive AC systems using an interdisciplinary approach combining both thermal science, and automotive engineering. It covers a variety of topics, such as: control strategies, optimization algorithms, and diagnosis schemes developed for when automotive air condition systems interact with powertrain dynamics. In contrast to the rapid advances in the fields of building HVAC and automotive separately, an interdisciplinary examination of both areas has long been neglected. The content presented in this book not only reveals opportunities when interaction between on-board HVAC and powertrain is considered, but also provides new findings to achieve performance improvement using model-based methodologies.

Download or read book Hybrid Dynamical Systems written by Mohamed Djemai and published by Springer. This book was released on 2014-10-13 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of contributions defining the state of current knowledge and new trends in hybrid systems – systems involving both continuous dynamics and discrete events – as described by the work of several well-known groups of researchers. Hybrid Dynamical Systems presents theoretical advances in such areas as diagnosability, observability and stabilization for various classes of system. Continuous and discrete state estimation and self-triggering control of nonlinear systems are advanced. The text employs various methods, among them, high-order sliding modes, Takagi–Sugeno representation and sampled-data switching to achieve its ends. The many applications of hybrid systems from power converters to computer science are not forgotten; studies of flexible-joint robotic arms and – as representative biological systems – the behaviour of the human heart and vasculature, demonstrate the wide-ranging practical significance of control in hybrid systems. The cross-disciplinary origins of study in hybrid systems are evident. Academic researchers and graduate students interested in hybrid and switched systems need look no further than Hybrid Dynamical Systems for a single source which will bring them up to date with work in this area from around the world.

Download or read book Frontiers in Advanced Control Systems written by Ginalber Luiz Serra and published by BoD – Books on Demand. This book was released on 2012-07-25 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book pretends to bring the state-of-art research results on advanced control from both the theoretical and practical perspectives. The fundamental and advanced research results as well as the contributions in terms of the technical evolution of control theory are of particular interest. This book can serve as a bridge between people who are working on the theoretical and practical research on control theory, and facilitate the proposal of development of new control techniques and its applications. In addition, this book presents educational importance to help students and researchers to know the frontiers of the control technology.

Download or read book Comprehensive Energy Management Eco Routing Velocity Profiles written by Daniel Watzenig and published by Springer. This book was released on 2017-05-17 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses the emerging topic of comprehensive energy management in electric vehicles from the viewpoint of academia and from the industrial perspective. It provides a seamless coverage of all relevant systems and control algorithms for comprehensive energy management, their integration on a multi-core system and their reliability assurance (validation and test). Relevant European projects contributing to the evolvement of comprehensive energy management in fully electric vehicles are also included.

Download or read book Model Predictive Vibration Control written by Gergely Takács and published by Springer Science & Business Media. This book was released on 2012-03-05 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time model predictive controller (MPC) implementation in active vibration control (AVC) is often rendered difficult by fast sampling speeds and extensive actuator-deformation asymmetry. If the control of lightly damped mechanical structures is assumed, the region of attraction containing the set of allowable initial conditions requires a large prediction horizon, making the already computationally demanding on-line process even more complex. Model Predictive Vibration Control provides insight into the predictive control of lightly damped vibrating structures by exploring computationally efficient algorithms which are capable of low frequency vibration control with guaranteed stability and constraint feasibility. In addition to a theoretical primer on active vibration damping and model predictive control, Model Predictive Vibration Control provides a guide through the necessary steps in understanding the founding ideas of predictive control applied in AVC such as: · the implementation of computationally efficient algorithms · control strategies in simulation and experiment and · typical hardware requirements for piezoceramics actuated smart structures. The use of a simple laboratory model and inclusion of over 170 illustrations provides readers with clear and methodical explanations, making Model Predictive Vibration Control the ideal support material for graduates, researchers and industrial practitioners with an interest in efficient predictive control to be utilized in active vibration attenuation.