Download or read book Advances in Monolithic Microwave Integrated Circuits for Wireless Systems Modeling and Design Technologies written by Marzuki, Arjuna and published by IGI Global. This book was released on 2011-08-31 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monolithic Microwave Integrated Circuit (MMIC) is an electronic device that is widely used in all high frequency wireless systems. In developing MMIC as a product, understanding analysis and design techniques, modeling, measurement methodology, and current trends are essential.Advances in Monolithic Microwave Integrated Circuits for Wireless Systems: Modeling and Design Technologies is a central source of knowledge on MMIC development, containing research on theory, design, and practical approaches to integrated circuit devices. This book is of interest to researchers in industry and academia working in the areas of circuit design, integrated circuits, and RF and microwave, as well as anyone with an interest in monolithic wireless device development.

Download or read book Microwave and Millimeter Wave Circuits and Systems written by Apostolos Georgiadis and published by John Wiley & Sons. This book was released on 2012-09-17 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave and Millimeter Wave Circuits and Systems: Emerging Design, Technologies and Applications provides a wide spectrum of current trends in the design of microwave and millimeter circuits and systems. In addition, the book identifies the state-of-the art challenges in microwave and millimeter wave circuits systems design such as behavioral modeling of circuit components, software radio and digitally enhanced front-ends, new and promising technologies such as substrate-integrated-waveguide (SIW) and wearable electronic systems, and emerging applications such as tracking of moving targets using ultra-wideband radar, and new generation satellite navigation systems. Each chapter treats a selected problem and challenge within the field of Microwave and Millimeter wave circuits, and contains case studies and examples where appropriate. Key Features: Discusses modeling and design strategies for new appealing applications in the domain of microwave and millimeter wave circuits and systems Written by experts active in the Microwave and Millimeter Wave frequency range (industry and academia) Addresses modeling/design/applications both from the circuit as from the system perspective Covers the latest innovations in the respective fields Each chapter treats a selected problem and challenge within the field of Microwave and Millimeter wave circuits, and contains case studies and examples where appropriate This book serves as an excellent reference for engineers, researchers, research project managers and engineers working in R&D, professors, and post-graduates studying related courses. It will also be of interest to professionals working in product development and PhD students.

Download or read book Electromagnetics and Network Theory and their Microwave Technology Applications written by Stefan Lindenmeier and published by Springer Science & Business Media. This book was released on 2011-07-13 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a discussion of the challenges and perspectives of electromagnetics and network theory and their microwave applications in all aspects. It collects the most interesting contribution of the symposium dedicated to Professor Peter Russer held in October 2009 in Munich.

Download or read book Advanced Microwave and Millimeter Wave Technologies written by Moumita Mukherjee and published by BoD – Books on Demand. This book was released on 2010-03-01 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is planned to publish with an objective to provide a state-of-the-art reference book in the areas of advanced microwave, MM-Wave and THz devices, antennas and systemtechnologies for microwave communication engineers, Scientists and post-graduate students of electrical and electronics engineering, applied physicists. This reference book is a collection of 30 Chapters characterized in 3 parts: Advanced Microwave and MM-wave devices, integrated microwave and MM-wave circuits and Antennas and advanced microwave computer techniques, focusing on simulation, theories and applications. This book provides a comprehensive overview of the components and devices used in microwave and MM-Wave circuits, including microwave transmission lines, resonators, filters, ferrite devices, solid state devices, transistor oscillators and amplifiers, directional couplers, microstripeline components, microwave detectors, mixers, converters and harmonic generators, and microwave solid-state switches, phase shifters and attenuators. Several applications area also discusses here, like consumer, industrial, biomedical, and chemical applications of microwave technology. It also covers microwave instrumentation and measurement, thermodynamics, and applications in navigation and radio communication.

Download or read book Slow wave Microwave and mm wave Passive Circuits written by Philippe Ferrari and published by John Wiley & Sons. This book was released on 2024-10-11 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive resource presenting the fundamentals and state of the art concepts, design examples, relevant components, and technology Slow-wave Microwave and mm-wave Passive Circuits presents the fundamentals and state of the art concepts, design examples, relevant components, and technology of the subject, plus examples of circuit layout optimization using slow-wave circuits. Recent advances in aspects of the slow-wave concept are covered, with potential applications including automotive radars, medical and security applications, and 5G and future 6G for very high-speed communications. The text considers a variety of slow-wave structures and associated concepts which are useful for circuit design, each structure electrically modeled with clear illustration. The highly qualified authors show that the use of the slow-wave concept can, in some cases, improve the performance of passive circuits. The techniques proposed make it possible to reduce the size and/or the performance of the circuits, with a beneficial cost-saving effect on semiconductor materials. Concepts are applied to several technologies, namely CMOS, PCB (Printed Circuit Board) and nanowires. Sample topics covered include: Concepts of energy storage with examples of slow-wave CPW (S-CPW), slow-wave SIW (SW-SIW), and slow-wave microstrip (S-MS), Transmission line topology and application in integrated technologies (CMOS), including possibilities offered by the BEOL (Back-End-Of-Line), Effect of the geometrical dimensions on the transmission line parameters (Zc, α, εreff, and Q) and comparisons between conventional CPW and CPS, and slow-wave CPW and CPS, Performance of slow-wave coupled lines and comparison with conventional microstrip coupled lines. Slow-wave Microwave and mm-wave Passive Circuits is a highly useful resource for graduate students (best complemented with a basic book on microwaves), engineers, and researchers. The text is also valuable for physicists wishing to implement comparable techniques in optics or mechanics.

Download or read book Microwave Journal written by and published by . This book was released on 2008 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Terahertz Electronics written by Jae-Sung Rieh and published by Springer Nature. This book was released on 2020-10-01 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a practical guide to terahertz electronics, especially for readers with an electronics background. The author guides readers through the all the key concepts of terahertz electronics, including terahertz sources, detectors, and waveguides, together with reviews on key terahertz applications on spectroscopy, imaging, communication, and radar. This book will serve as a handy reference for graduate students and engineers in the field of terahertz with a viewpoint from electronics. Presents the topic of terahertz from electronics viewpoint; Designed to be particularly helpful for the readers familiar with semiconductor devices and circuits; Enables optics-based terahertz researchers to understand terahertz electronics; Based on the author’s extensive experience from both industry and academia.

Download or read book Advanced Microwave Circuits and Systems written by Vitaliy Zhurbenko and published by BoD – Books on Demand. This book was released on 2010-04-01 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on recent research work conducted by the authors dealing with the design and development of active and passive microwave components, integrated circuits and systems. It is divided into seven parts. In the first part comprising the first two chapters, alternative concepts and equations for multiport network analysis and characterization are provided. A thru-only de-embedding technique for accurate on-wafer characterization is introduced. The second part of the book corresponds to the analysis and design of ultra-wideband low- noise amplifiers (LNA).

Download or read book SiGe Ge and Related Compounds 3 Materials Processing and Devices written by David Harame and published by The Electrochemical Society. This book was released on 2008 with total page 1136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced semiconductor technology is depending on innovation and less on "classical" scaling. SiGe, Ge, and Related Compounds have become a key component of the arsenal in improving semiconductor performance. This issue of ECS Transactions discusses the technology to form these materials, process them, FET devices incorporating them, Surfaces and Interfaces, Optoelectronic devices, and HBT devices.

Download or read book Parameter Extraction and Complex Nonlinear Transistor Models written by Gunter Kompa and published by Artech House. This book was released on 2019-12-31 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: All model parameters are fundamentally coupled together, so that directly measured individual parameters, although widely used and accepted, may initially only serve as good estimates. This comprehensive resource presents all aspects concerning the modeling of semiconductor field-effect device parameters based on gallium-arsenide (GaAs) and gallium nitride (GaN) technology. Metal-semiconductor field-effect transistors (MESFETs), high electron mobility transistors (HEMTs) and heterojunction bipolar transistors (HBTs), their structures and functions, and existing transistor models are also classified. The Shockley model is presented in order to give insight into semiconductor field-effect transistor (FET) device physics and explain the relationship between geometric and material parameters and device performance. Extraction of trapping and thermal time constants is discussed. A special section is devoted to standard nonlinear FET models applied to large-signal measurements, including static-/pulsed-DC and single-/two-tone stimulation. High power measurement setups for signal waveform measurement, wideband source-/load-pull measurement (including envelope source-/load pull) are also included, along with high-power intermodulation distortion (IMD) measurement setup (including envelope load-pull). Written by a world-renowned expert in the field, this book is the first to cover of all aspects of semiconductor FET device modeling in a single volume.

Download or read book Advances in Analog and RF IC Design for Wireless Communication Systems written by Gabriele Manganaro and published by Academic Press. This book was released on 2013-05-13 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Analog and RF IC Design for Wireless Communication Systems gives technical introductions to the latest and most significant topics in the area of circuit design of analog/RF ICs for wireless communication systems, emphasizing wireless infrastructure rather than handsets. The book ranges from very high performance circuits for complex wireless infrastructure systems to selected highly integrated systems for handsets and mobile devices. Coverage includes power amplifiers, low-noise amplifiers, modulators, analog-to-digital converters (ADCs) and digital-to-analog converters (DACs), and even single-chip radios. This book offers a quick grasp of emerging research topics in RF integrated circuit design and their potential applications, with brief introductions to key topics followed by references to specialist papers for further reading. All of the chapters, compiled by editors well known in their field, have been authored by renowned experts in the subject. Each includes a complete introduction, followed by the relevant most significant and recent results on the topic at hand. This book gives researchers in industry and universities a quick grasp of the most important developments in analog and RF integrated circuit design. - Emerging research topics in RF IC design and its potential application - Case studies and practical implementation examples - Covers fundamental building blocks of a cellular base station system and satellite infrastructure - Insights from the experts on the design and the technology trade-offs, the challenges and open questions they often face - References to specialist papers for further reading

Download or read book Reconfigurable Circuits and Technologies for Smart Millimeter Wave Systems written by Philippe Ferrari and published by Cambridge University Press. This book was released on 2022-05-26 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the theory, modeling, and design of tunable mm-wave circuits and systems using CMOS, RF MEMS, and microwave liquid crystals.

Download or read book Millimeter Wave Integrated Circuits written by Mladen Božanić and published by Springer Nature. This book was released on 2020-03-16 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This peer-reviewed book explores the methodologies that are used for effective research, design and innovation in the vast field of millimeter-wave circuits, and describes how these have to be modified to fit the uniqueness of high-frequency nanoelectronics design. Each chapter focuses on a specific research challenge related to either small form factors or higher operating frequencies. The book first examines nanodevice scaling and the emerging electronic design automation tools that can be used in millimeter-wave research, as well as the singular challenges of combining deep-submicron and millimeter-wave design. It also demonstrates the importance of considering, in the millimeter-wave context, system-level design leading to differing packaging options. Further, it presents integrated circuit design methodologies for all major transceiver blocks typically employed at millimeter-wave frequencies, as these methodologies are normally fundamentally different from the traditional design methodologies used in analogue and lower-frequency electronics. Lastly, the book discusses the methodologies of millimeter-wave research and design for extreme or harsh environments, rebooting electronics, the additional opportunities for terahertz research, and the main differences between the approaches taken in millimeter-wave research and terahertz research.

Download or read book SiGe based Re engineering of Electronic Warfare Subsystems written by Wynand Lambrechts and published by Springer. This book was released on 2016-10-19 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers a thorough understanding of the applicability of new-generation silicon-germanium (SiGe) electronic subsystems for electronic warfare and defensive countermeasures in military contexts. It explains in detail the theoretical and technical background, and addresses all aspects of the integration of SiGe as an enabling technology for maritime, land, and airborne / spaceborne electronic warfare, including research, design, development, and implementation. The coverage is supported by mathematical derivations, informative illustrations, practical examples, and case studies. While SiGe technology provides speed, performance, and price advantages in many markets, to date only limited information has been available on its use in electronic warfare systems, especially in developing nations. Addressing that need, this book offers essential engineering guidelines that especially focus on the speed and reliability of current-generation SiGe circuits and highlight emerging innovations that help to ensure the sustainable long-term integration of SiGe into electronic warfare systems.

Download or read book Advanced Materials and Technologies for Micro Nano Devices Sensors and Actuators written by Evgeni Gusev and published by Springer Science & Business Media. This book was released on 2010-03-15 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: A NATO Advanced Research Workshop (ARW) entitled “Advanced Materials and Technologies for Micro/Nano Devices, Sensors and Actuators” was held in St. Petersburg, Russia, from June 29 to July 2, 2009. The main goal of the Workshop was to examine (at a fundamental level) the very complex scientific issues that pertain to the use of micro- and nano-electromechanical systems (MEMS and NEMS), devices and technologies in next generation commercial and defen- related applications. Micro- and nano-electromechanical systems represent rather broad and diverse technological areas, such as optical systems (micromirrors, waveguides, optical sensors, integrated subsystems), life sciences and lab equipment (micropumps, membranes, lab-on-chip, membranes, microfluidics), sensors (bio-sensors, chemical sensors, gas-phase sensors, sensors integrated with electronics) and RF applications for signal transmission (variable capacitors, tunable filters and antennas, switches, resonators). From a scientific viewpoint, this is a very multi-disciplinary field, including micro- and nano-mechanics (such as stresses in structural materials), electronic effects (e. g. charge transfer), general electrostatics, materials science, surface chemistry, interface science, (nano)tribology, and optics. It is obvious that in order to overcome the problems surrounding next-generation MEMS/NEMS devices and applications it is necessary to tackle them from different angles: theoreticians need to speak with mechanical engineers, and device engineers and modelers to listen to surface physicists. It was therefore one of the main objectives of the workshop to bring together a multidisciplinary team of distinguished researchers.

Download or read book Noise Coupling in System on Chip written by Thomas Noulis and published by CRC Press. This book was released on 2018-01-09 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noise Coupling is the root-cause of the majority of Systems on Chip (SoC) product fails. The book discusses a breakthrough substrate coupling analysis flow and modelling toolset, addressing the needs of the design community. The flow provides capability to analyze noise components, propagating through the substrate, the parasitic interconnects and the package. Using this book, the reader can analyze and avoid complex noise coupling that degrades RF and mixed signal design performance, while reducing the need for conservative design practices. With chapters written by leading international experts in the field, novel methodologies are provided to identify noise coupling in silicon. It additionally features case studies that can be found in any modern CMOS SoC product for mobile communications, automotive applications and readout front ends.

Download or read book Systems Level Packaging for Millimeter Wave Transceivers written by Mladen Božanić and published by Springer. This book was released on 2019-03-26 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a system-level approach to making packaging decisions for millimeter-wave transceivers. In electronics, the packaging forms a bridge between the integrated circuit or individual device and the rest of the electronic system, encompassing all technologies between the two. To be able to make well-founded packaging decisions, researchers need to understand a broad range of aspects, including: concepts of transmission bands, antennas and propagation, integrated and discrete package substrates, materials and technologies, interconnects, passive and active components, as well as the advantages and disadvantages of various packages and packaging approaches, and package-level modeling and simulation. Packaging also needs to be considered in terms of system-level testing, as well as associated testing and production costs, and reducing costs. This peer-reviewed work contributes to the extant scholarly literature by addressing the aforementioned concepts and applying them to the context of the millimeter-wave regime and the unique opportunities that this transmission approach offers.