Download or read book Electrical Properties of Solid Insulating Materials written by and published by ASTM International. This book was released on 1987 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors written by John H. Jackson and published by Springer. This book was released on 2018-12-20 with total page 2460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set represents a collection of papers presented at the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors. The purpose of this conference series is to foster an exchange of ideas about problems and their remedies in water-cooled nuclear power plants of today and the future. Contributions cover problems facing nickel-based alloys, stainless steels, pressure vessel and piping steels, zirconium alloys, and other alloys in water environments of relevance. Components covered include pressure boundary components, reactor vessels and internals, steam generators, fuel cladding, irradiated components, fuel storage containers, and balance of plant components and systems.

Download or read book Conference Record of the IEEE International Symposium on Electrical Insulation written by and published by . This book was released on 1988 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings International Conference on Large High Voltage Electric Systems CIGRE written by International Conference on Large High Voltage Electric Systems and published by . This book was released on 1994 with total page 1494 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IEEE Conference on Electrical Insulation and Dielectric Phenomena written by IEEE Dielectrics & Electrical Insulation and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1992 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineering Dielectrics Volume IIA Electrical Properties of Solid Insulating Materials written by R. Bartnikas and published by ASTM International. This book was released on 1983-12-31 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book written by 国立国会図書館 (Japan) and published by . This book was released on 1972 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book National Union Catalog written by and published by . This book was released on with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes entries for maps and atlases.

Download or read book Electrical Insulation in Power Systems written by Malik and published by CRC Press. This book was released on 2018-02-06 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the design, operations, diagnostics and testing of electrical insulation in high-voltage power networks. The book presents the fundamental properties of dielectrics essential for the optimum design of power systems. It provides a survey of advanced digital and electro-optic techniques used in both the field and research.

Download or read book Polymer Dielectrics written by Boxue Du and published by BoD – Books on Demand. This book was released on 2017-05-11 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives the reader an overview on electrical properties and applications such as converter transformer, transistor, and energy storage. Besides, this book also presents some recent researches on typical polymer material such as silicon rubber and LDPE, which may provide some clues of advanced polymer properties for both engineers and researches. The author has been a professor at the Department of Electrical Engineering, School of Electrical Engineering and Automation, Tianjin University, China, since 2002. He has been active in polymer insulation research since the 1990s. He is a member of IEEJ, senior member of CSEE, member at several WG in CIGRE, and associate editor of the IEEE Transactions on Dielectrics and Electrical Insulation.

Download or read book NIST Serial Holdings written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 2002 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Vacuum Interrupter written by Paul G. Slade and published by CRC Press. This book was released on 2020-11-29 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: Title: The Vacuum Interrupter: Theory, Design, and ApplicationShelving guide: Electrical Engineering Dr. Paul Slade draws from his nearly six decades of active experience to develop this second edition of The Vacuum Interrupter: Theory, Design, and Application. This book begins by discussing the design requirements for high voltage vacuum interrupters and then the contact requirements to interrupt the vacuum arc. It then continues by describing the various applications in which the vacuum interrupter is generally utilized. Part 1 of this book begins with a detailed review of the vacuum breakdown process. It continues by covering the steps necessary for the design and the manufacture of a successful vacuum interrupter. The vacuum arc is then discussed, including how it is affected as a function of current. An overview of the development and use of practical contact materials, along with their advantages and disadvantages, follows. Contact designs that are introduced to control the high current vacuum arc are also analyzed. Part 2, on application, begins with a discussion of the arc interruption process for low current and high current vacuum arcs. It examines the voltage escalation phenomenon that can occur when interrupting inductive circuits. The occurrence of contact welding for closed contacts subjected to the passage of high currents, and for contacts when closing on high currents, is explored. The general requirements for the successful manufacture and testing of vacuum circuit breakers is then presented. The general application of vacuum interrupters to switch load currents, especially when applied to capacitor circuits, is also given. The interruption of high short circuit currents is presented along with the expected performance of the two major contact designs. Owing to the ever-increasing need for environmentally friendly circuit protection devices, the development and application of the vacuum interrupter will only increase in the future. At present the vacuum circuit breaker is the technology of choice for distribution circuits (5kV to 40.5kV). It is increasingly being applied to transmission circuits (72.5kV to 242kV). In the future, its application for protecting high voltage DC networks is assured. Audience This is a practical source book for engineers and scientists interested in studying the development and application of the vacuum interrupter Research scientists in industry and universities Graduate students beginning their study of vacuum interrupter phenomena Design engineers applying vacuum interrupters in vacuum switches, vacuum contactors, vacuum circuit breakers, and vacuum contactors It provides a unique and comprehensive review of all aspects of vacuum interrupter technology for those new to the subject and for those who wish to obtain a deeper understanding of its science and application Scientists and engineers, who are beginning their research into vacuum breakdown and aspects of the vacuum arc, will find the extensive bibliography and phenomenological descriptions to be a useful introduction

Download or read book Electrical Insulating Liquids written by and published by ASTM International. This book was released on 1994 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Submarine Power Cables written by Thomas Worzyk and published by Springer Science & Business Media. This book was released on 2009-08-11 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for high-performance submarine power cables is increasing as more and more offshore wind parks are installed, and the national electric grids are interconnected. Submarine power cables are installed for the highest voltages and power to transport electric energy under the sea between islands, countries and even continents. The installation and operation of submarine power cables is much different from land cables. Still, in most textbooks on electrical power systems, information on submarine cables is scarce. This book is closing the gap. Different species of submarine power cables and their application are explained. Students and electric engineers learn on the electric and mechanic properties of submarine cables. Project developers and utility managers will gain useful information on the necessary marine activities such as pre-laying survey, cable lay vessels, guard boats etc., for the submarine cable installation and repair. Investors and decision makers will find an overview on environmental aspects of submarine power cables. A comprehensive reference list is given for those who want further reading.

Download or read book Electrical Breakdown and Discharges in Gases written by Erich E. Kunhardt and published by Springer Nature. This book was released on 1983 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Treatise on Clean Surface Technology written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanoparticle Reinforced Polymers written by Ana María Díez-Pascual and published by MDPI. This book was released on 2019-07-23 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, a collection of 12 original contributions and 4 reviews, provides a selection of the most recent advances in the preparation, characterization, and applications of polymeric nanocomposites comprising nanoparticles. The concept of nanoparticle-reinforced polymers came about three decades ago, following the outstanding discovery of fullerenes and carbon nanotubes. One of the main ideas behind this approach is to improve the matrix mechanical performance. The nanoparticles exhibit higher specific surface area, surface energy, and density compared to microparticles and, hence, lower nanofiller concentrations are needed to attain properties comparable to, or even better than, those obtained by conventional microfiller loadings, which facilitates processing and minimizes the increase in composite weight. The addition of nanoparticles into different polymer matrices opens up an important research area in the field of composite materials. Moreover, many different types of inorganic nanoparticles, such as quantum dots, metal oxides, and ceramic and metallic nanoparticles, have been incorporated into polymers for their application in a wide range of fields, ranging from medicine to photovoltaics, packaging, and structural applications.