Download or read book BERRU Predictive Modeling written by Dan Gabriel Cacuci and published by Springer. This book was released on 2018-12-29 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the experimental calibration of best-estimate numerical simulation models. The results of measurements and computations are never exact. Therefore, knowing only the nominal values of experimentally measured or computed quantities is insufficient for applications, particularly since the respective experimental and computed nominal values seldom coincide. In the author’s view, the objective of predictive modeling is to extract “best estimate” values for model parameters and predicted results, together with “best estimate” uncertainties for these parameters and results. To achieve this goal, predictive modeling combines imprecisely known experimental and computational data, which calls for reasoning on the basis of incomplete, error-rich, and occasionally discrepant information. The customary methods used for data assimilation combine experimental and computational information by minimizing an a priori, user-chosen, “cost functional” (usually a quadratic functional that represents the weighted errors between measured and computed responses). In contrast to these user-influenced methods, the BERRU (Best Estimate Results with Reduced Uncertainties) Predictive Modeling methodology developed by the author relies on the thermodynamics-based maximum entropy principle to eliminate the need for relying on minimizing user-chosen functionals, thus generalizing the “data adjustment” and/or the “4D-VAR” data assimilation procedures used in the geophysical sciences. The BERRU predictive modeling methodology also provides a “model validation metric” which quantifies the consistency (agreement/disagreement) between measurements and computations. This “model validation metric” (or “consistency indicator”) is constructed from parameter covariance matrices, response covariance matrices (measured and computed), and response sensitivities to model parameters. Traditional methods for computing response sensitivities are hampered by the “curse of dimensionality,” which makes them impractical for applications to large-scale systems that involve many imprecisely known parameters. Reducing the computational effort required for precisely calculating the response sensitivities is paramount, and the comprehensive adjoint sensitivity analysis methodology developed by the author shows great promise in this regard, as shown in this book. After discarding inconsistent data (if any) using the consistency indicator, the BERRU predictive modeling methodology provides best-estimate values for predicted parameters and responses along with best-estimate reduced uncertainties (i.e., smaller predicted standard deviations) for the predicted quantities. Applying the BERRU methodology yields optimal, experimentally validated, “best estimate” predictive modeling tools for designing new technologies and facilities, while also improving on existing ones.
Download or read book Theory Application and Implementation of Monte Carlo Method in Science and Technology written by Pooneh Saidi Bidokhti and published by BoD – Books on Demand. This book was released on 2019-12-18 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Monte Carlo method is a numerical technique to model the probability of all possible outcomes in a process that cannot easily be predicted due to the interference of random variables. It is a technique used to understand the impact of risk, uncertainty, and ambiguity in forecasting models. However, this technique is complicated by the amount of computer time required to achieve sufficient precision in the simulations and evaluate their accuracy. This book discusses the general principles of the Monte Carlo method with an emphasis on techniques to decrease simulation time and increase accuracy.
Download or read book Radiation serving society written by American Nuclear Society. Radiation Protection and Shielding Division. Biennial Topical Meeting and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory Application and Implementation of Monte Carlo Method in Science and Technology written by and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Nuclear Data written by and published by . This book was released on 1957 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Launch vehicle Dynamics written by Harry L. Runyan and published by . This book was released on 1961 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diseases of the Pancreas written by Hans Günther Beger and published by Springer Science & Business Media. This book was released on 2008-01-08 with total page 921 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the latest comprehensive data about molecular mechanism of acute pancreatitis, chronic pancreatitis and pancreatic cancer. The diagnostic techniques including histology, radiology, sonography etc. are based on the sensitivity and specificity of the respective methods. Special focus is given to the indication and contraindication to surgical techniques. The book contains specific treatment modality and results for the first time after long-term outcome evaluation. There is detailed description of diagnosis and treatment, and the book is abundantly illustrated with approximately 300 color illustrations.
Download or read book Fusion Neutronics written by Yican Wu and published by Springer. This book was released on 2017-08-16 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive introduction to fusion neutronics, covering all key topics from the fundamental theories and methodologies, as well as a wide range of fusion system designs and experiments. It is the first-ever book focusing on the subject of fusion neutronics research. Compared with other nuclear devices such as fission reactors and accelerators, fusion systems are normally characterized by their complex geometry and nuclear physics, which entail new challenges for neutronics such as complicated modeling, deep penetration, low simulation efficiency, multi-physics coupling, etc. The book focuses on the neutronic characteristics of fusion systems and introduces a series of theories and methodologies that were developed to address the challenges of fusion neutronics. Further, it introduces readers to the unique principles and procedures of neutronics design, experimental methodologies and methodologies for fusion systems. The book not only highlights the latest advances and trends in the field, but also draws on the experiences and skills collected in the author’s more than 40 years of research. To make it more accessible and enhance its practical value, various representative examples are included to illustrate the application and efficiency of the methods, designs and experimental techniques discussed.
Download or read book Fusion Reactor Physics written by Terry Kammash and published by Ann Arbor Science Publishers. This book was released on 1975 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Second Order Adjoint Sensitivity Analysis Methodology written by Dan Gabriel Cacuci and published by CRC Press. This book was released on 2018-02-19 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second-Order Adjoint Sensitivity Analysis Methodology generalizes the First-Order Theory presented in the author’s previous books published by CRC Press. This breakthrough has many applications in sensitivity and uncertainty analysis, optimization, data assimilation, model calibration, and reducing uncertainties in model predictions. The book has many illustrative examples that will help readers understand the complexity of the subject and will enable them to apply this methodology to problems in their own fields. Highlights: • Covers a wide range of needs, from graduate students to advanced researchers • Provides a text positioned to be the primary reference for high-order sensitivity and uncertainty analysis • Applies to all fields involving numerical modeling, optimization, quantification of sensitivities in direct and inverse problems in the presence of uncertainties. About the Author: Dan Gabriel Cacuci is a South Carolina SmartState Endowed Chair Professor and the Director of the Center for Nuclear Science and Energy, Department of Mechanical Engineering at the University of South Carolina. He has a Ph.D. in Applied Physics, Mechanical and Nuclear Engineering from Columbia University. He is also the recipient of many awards including four honorary doctorates, the Ernest Orlando Lawrence Memorial award from the U.S. Dept. of Energy and the Arthur Holly Compton, Eugene P. Wigner and the Glenn Seaborg Awards from the American Nuclear Society.
Download or read book Diffusion in Condensed Matter written by Paul Heitjans and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 971 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive, handbook-style survey of diffusion in condensed matter gives detailed insight into diffusion as the process of particle transport due to stochastic movement. It is understood and presented as a phenomenon of crucial relevance for a large variety of processes and materials. In this book, all aspects of the theoretical fundamentals, experimental techniques, highlights of current developments and results for solids, liquids and interfaces are presented.
Download or read book Advanced Monte Carlo for Radiation Physics Particle Transport Simulation and Applications written by Andreas Kling and published by Springer Science & Business Media. This book was released on 2014-02-22 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the state of the art of Monte Carlo methods in radiation physics and particle transport simulation and applications. Special attention is paid to algorithm development for modeling, and the analysis of experiments and measurements in a variety of fields.
Download or read book Life As a Matter of Fat written by Ole G. Mouritsen and published by Springer Science & Business Media. This book was released on 2005-10-24 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a multi-disciplinary perspective on the physics of life and the particular role played by lipids and the lipid-bilayer component of cell membranes. Emphasizes the physical properties of lipid membranes seen as soft and molecularly structured interfaces. By combining and synthesizing insights obtained from a variety of recent studies, an attempt is made to clarify what membrane structure is and how it can be quantitatively described. Shows how biological function mediated by membranes is controlled by lipid membrane structure and organization on length scales ranging from the size of the individual molecule, across molecular assemblies of proteins and lipid domains in the range of nanometers, to the size of whole cells. Applications of lipids in nano-technology and biomedicine are also described.
Download or read book Additive Manufacturing for the Aerospace Industry written by Francis H. Froes and published by Elsevier. This book was released on 2019-02-15 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing for the Aerospace Industry explores the design, processing, metallurgy and applications of additive manufacturing (AM) within the aerospace industry. The book's editors have assembled an international team of experts who discuss recent developments and the future prospects of additive manufacturing. The work includes a review of the advantages of AM over conventionally subtractive fabrication, including cost considerations. Microstructures and mechanical properties are also presented, along with examples of components fabricated by AM. Readers will find information on a broad range of materials and processes used in additive manufacturing. It is ideal reading for those in academia, government labs, component fabricators, and research institutes, but will also appeal to all sectors of the aerospace industry. - Provides information on a broad range of materials and processes used in additive manufacturing - Presents recent developments in the design and applications of additive manufacturing specific to the aerospace industry - Covers a wide array of materials for use in the additive manufacturing of aerospace parts - Discusses current standards in the area of aerospace AM parts
Download or read book X Ray Imaging written by Harry E. Martz and published by CRC Press. This book was released on 2016-10-26 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: While books on the medical applications of x-ray imaging exist, there is not one currently available that focuses on industrial applications. Full of color images that show clear spectrometry and rich with applications, X-Ray Imaging fills the need for a comprehensive work on modern industrial x-ray imaging. It reviews the fundamental science of x-ray imaging and addresses equipment and system configuration. Useful to a broad range of radiation imaging practitioners, the book looks at the rapid development and deployment of digital x-ray imaging system.
Download or read book Boiling Water Reactor Plant written by United Engineers & Constructors, inc and published by . This book was released on 1972 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Nuclear Fuel Cycle written by Nicholas Tsoulfanidis and published by . This book was released on 2013 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt:
