Download or read book 03401 13 Construction Drawings and Specifications Trainee Guide written by Nccer and published by Prentice Hall. This book was released on 2014-03-20 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book INSTRUCTOR RESOURCE FOR 03401 13 CONSTRUCTION DRAWINGS AND SPECIFICATIONS TRAINEE GUIDE written by NCCER. and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 19211 18 Vapor Retarders and Insulation Coatings Trainee Guide written by NCCER and published by Prentice Hall. This book was released on 2017-12-30 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 00105 15 Introduction to Construction Drawings Trainee Guide written by NCCER and published by Prentice Hall. This book was released on 2015-06-12 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: (Module ID 00105-15) Introduces the basic elements of construction drawings. The common components of drawings are presented, as well as the most common drawing types. The use of drawing scales and how to measure drawings is also covered.

Download or read book 28103 13 Measurements Drawings and Specifications Trainee Guide written by NCCER and published by Prentice Hall. This book was released on 2013-12-04 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Core Curriculum Trainee Guide written by NCCER and published by Pearson. This book was released on 2017-01-26 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the eBook of the printed book and may not include any media, website access codes, or print supplements that may come packaged with the bound book. This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more! Key content includes: Basic Safety, Introduction to Construction Math, Introduction to Hand Tools, Introduction to Power Tools, Construction Drawings, Basic Rigging, Basic Communication Skills, and Basic Employability Skills. A new module titled Introduction to Materials Handling has also been added! New printed instructor’s package includes lesson plans, instructor’s copy of trainee guide with an access code to download TestGen software, module exams, PowerPoints®, and performance profile sheets from www.nccerirc.com. Printed Instructors package ISBN: 9780134296340 NCCERconnect – eLearning Series is a new and improved online supplement in XL platform. This unique online course supplement in the form of an electronic book and essential course management tools is delivered through an exceptional user-friendly interface www.nccerconnect.com. NCCERconnect provides a range of visual, auditory, and interactive elements to enhance student learning and instructor delivery of craft training. NCCERconnect ISBNs: Stand Alone Student Access card: 0-13-423592-4 Hardcover Print Core + Student Access card: 0-13-428567-0 Paperback Print Core +Student Access card: 0-13-439192-6

Download or read book Core Curriculum written by and published by . This book was released on 2015 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 03401 09 Construction Drawings and Specifications TG written by NCCER and published by Prentice Hall. This book was released on 2009-01-31 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tennessee Residential and Commercial Construction I Level 2 Trainee Guide written by NCCER and published by Pearson. This book was released on 2017-03-29 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the eBook of the printed book and may not include any media, website access codes, or print supplements that may come packaged with the bound book. Tennessee Residential and Commercial Construction I (Level 2), ©2017 ISBN: 978-0-13-452963-9 SUMMARY: This custom text contains selected modules from NCCER’s Construction Technology curriculum designed by highly qualified subject matter experts and includes theoretical and practical skills, and is ideal for programs in construction. It consists of modules from various NCCER programs and is available in full color. To provide a comprehensive, user-friendly resource, the text incorporates various features to provide students with the proper tools to get started in the trade. These features include: - Learning objectives, Performance Tasks, and Trade Terms are found at beginning of each module - Color illustrations and photographs are used throughout the text to highlight important concepts and help clarify complex instructions - Special Features provide a head start for those entering the field by presenting technical tips and professional practices from operators in various disciplines - Safety features are set off from the main text in highlighted boxes and organized into Notes, Cautions, and Warnings based on the potential danger of the issue being addressed - Going Green looks at ways to preserve the environment, save energy, and make good choices regarding the health of the planet - Did You Know features offers hints, tips, and other helpful information from the trade - Step-by-step instructions guide students through technical procedures and tasks - Each module presents a list of Trade Terms that are discussed within the text and defined at the end of each module - Review Questions at the end of each module are provided to reinforce the knowledge students have gained Supplements: An electronic version of the book is also available in the VitalSource platform. A printed Teacher Edition, ISBN 978-0-13-452964-6, contains an instructor’s copy of the student edition as well as lesson plans for each module, and online access to the Test Bank, PowerPoints and other instructor resources

Download or read book Tennessee Fundamentals of Construction Level 1 Trainee Guide written by NCCER and published by Pearson. This book was released on 2017-03-29 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the eBook of the printed book and may not include any media, website access codes, or print supplements that may come packaged with the bound book. Tennessee Fundamentals of Construction ©2017 ISBN: 978-0-13-457843-9 This custom text meets Tennessee standards and contains Core Curriculum: Introductory Craft Skills, 5E, as well as additional modules on Project Management. NCCER has enhanced the text’s appeal to an international market, primarily with new features to show how construction impacts countries around the world. A revised “Basic Safety (Construction Site Safety Orientation)” module aligns to the Occupational Safety and Health Administration’s (OSHA’s) 10-hour program. This means that instructors who are OSHA-500 certified are able to issue 10-hour OSHA cards to their students who successfully complete the module. Combined with an NCCER credential, the OSHA 10-hour card will show employers a credible and valuable training record. While aligning to the OSHA-based standards of the United States, this module enhances safety practices and discusses how these can change state-to-state and country-to-country. Also, the successful completion of this module will award a construction Site Safety Orientation credential. This edition of the “Introduction to Construction Math” module keeps math “real” for students by emphasizing application over theory-related exercises. By keeping math “real,” the language of math is much easier to understand. As a companion piece to this module, a Basic Math Workbook is also available for instructors to use to supplement classroom activities. The “Introduction to Basic Rigging” module includes basic safety requirements for working around rigging and cranes, and rigging equipment identification. This module has been reduced in size and hours. It is an elective, and as such is not required for successful completion of the Core Curriculum. The “Basic Communication Skills” module now includes content on nonverbal communication and explains the importance of electronic messaging in the construction industry. The “Introduction to Material Handling” module now presents the basics of knot tying, as knots are critical with any material handling procedure. Introduction to Project Management module introduces the roles and responsibilities of project management, including technical and management skills. It presents and overview of the various phases in an construction project and descries alternate project delivery methods. SUPPLEMENTS: An electronic version of this custom book is also available in VitalSource. A printed Teacher Edition (ISBN 978-0-13-457846-0) contains an instructor’s copy of the Trainee Guide, Lesson Plans, and Basic Math Workbook. The Basic Math Workbook is intended for instructors to use as an additional learning aid for students in the classroom to improve math skills. It also includes an access code to the NCCER Instructor Resource Center, which contains the following digital resources: Lesson Plans Module PowerPoints Performance Profile Sheet

Download or read book 27101 13 Commercial Drawings Trainee Guide written by NCCER and published by Prentice Hall. This book was released on 2014-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book AUM8044A Read and Interpret Engineering Drawings and Job Specifications written by and published by . This book was released on 2001 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Construction Technology written by and published by Prentice Hall. This book was released on 2006 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: This exceptionally produced trainee guide features a highly illustrated design, technical hints and tips from industry experts, review questions and a whole lot more Key content includes Roof Framing, Roofing Applications, Exterior Finishing, Stairs, Electrical Safety, Wiring: Commercial and Industrial, Introduction to Drain, Waste and Vent Systems, Plastic Pipe and Fittings, and Copper Pipe and Fittings. Instructor Supplements Instructors: Product supplements may be ordered directly through OASIS at http: //oasis.pearson.com. For more information contact your Pearson NCCER/Contren Sales Specialist at http: //nccer.pearsonconstructionbooks.com/store/sales.aspx. * Annotated Instructor's Guide (AIG) Paperback 0-13-228219-4 * AIG Paperback + Contren Connect Access Code PACKAGE 0-13-233083-0 * AIG Contren Connect Access Code ONLY 0-13-605688-1 * Computerized Testing Software 0-13-229116-9 * Transparency Masters 0-13-229109-6 * PowerPoint(R) Presentation Slides 0-13-229117-7 * National Construction Career Test (NCCT) available with this title http: //nccer.org/academicAvailAssessments.a

Download or read book 86301 15 Advanced Structural Print Reading Trainee Guide written by NCCER and published by Prentice Hall. This book was released on 2015-03-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: (Module ID 86301-15) Focuses on learning to interpret ship construction drawings, ranging from the highest level general arrangement drawing to the lowest level piece-part drawing.

Download or read book Print and Specifications Reading for Construction written by Ron Russell and published by John Wiley & Sons. This book was released on 2024-04-09 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated guidance for accurately interpreting graphic and written construction documents, including commercial ones Print and Specifications Reading for Construction is an easy-to-understand yet comprehensive manual on how to interpret construction documents, including the often quite complicated construction specifications for commercial building projects, covering both the graphic and written sets and demonstrating how they relate to each other. Complete sets of construction documents for three actual building projects are available on the book companion website. Practice questions and exercises are included throughout the text to aid in seamless reader comprehension and information retention. Written by a highly qualified author with more than three decades of experience in the field, Print and Specifications Reading for Construction includes information on: Basics of construction plan reading and relevant terminology, including architectural, structural, mechanical, electrical, plumbing, and civil drawings and specifications Use of schematics in today's construction environment, and updates on soils and structural members Terminology and practical applications of BIM and sustainability, and clearly illustrated descriptions of various structural members Real construction problems in large-scale residential and commercial projects via included sample sets Covering both print reading and key construction specifications, Print and Specifications Reading for Construction is an easy-to-understand, accessible, and completely comprehensive guide on the subject for students in construction management and construction technology programs.

Download or read book Construction Specifications Handbook written by Hans W. Meier and published by . This book was released on 1975 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tennessee Residential and Commercial Construction II Level 3 Trainee Guide written by NCCER and published by Pearson. This book was released on 2017-03-29 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the eBook of the printed book and may not include any media, website access codes, or print supplements that may come packaged with the bound book. Tennessee Residential and Commercial Construction II (Level 3) ©2017 ISBN: 978-0-13-455003-9 This custom text contains selected modules from NCCER’s Construction Technology curriculum designed by highly qualified subject matter experts and includes theoretical and practical skills, and is ideal for programs in construction. It consists of modules on masonry, roofing, exterior finishing, and others from various NCCER programs and is available in full color. To provide a comprehensive, user-friendly resource, the text incorporates various features to provide students with the proper tools to get started in the trade. These features include: - Learning objectives, Performance Tasks, and Trade Terms are found at beginning of each module - Color illustrations and photographs are used throughout the text to highlight important concepts and help clarify complex instructions - Special Features provide a head start for those entering the field by presenting technical tips and professional practices from operators in various disciplines - Safety features are set off from the - main text in highlighted boxes and organized into Notes, Cautions, and Warnings based on the potential danger of the issue being addressed - Going Green looks at ways to preserve the environment, save energy, and make good choices regarding the health of the planet - Did You Know features offers hints, tips, and other helpful information from the trade - Step-by-step instructions guide students through technical procedures and tasks - Each module presents a list of Trade Terms that are discussed within the text and defined at the end of each module - Review Questions at the end of each module are provided to reinforce the knowledge students have gained Supplements: An electronic version of this custom text is available in VitalSource. A printed Teacher Edition, ISBN 978-0-13-455005-3, contains an instructor’s copy of the student edition as well as lesson plans for each module. Online instructor resources include a Test Bank, PowerPoints, and other support material.