Download or read book Scanning Electron Microscopy and X Ray Microanalysis written by Joseph Goldstein and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has evolved by processes of selection and expansion from its predecessor, Practical Scanning Electron Microscopy (PSEM), published by Plenum Press in 1975. The interaction of the authors with students at the Short Course on Scanning Electron Microscopy and X-Ray Microanalysis held annually at Lehigh University has helped greatly in developing this textbook. The material has been chosen to provide a student with a general introduction to the techniques of scanning electron microscopy and x-ray microanalysis suitable for application in such fields as biology, geology, solid state physics, and materials science. Following the format of PSEM, this book gives the student a basic knowledge of (1) the user-controlled functions of the electron optics of the scanning electron microscope and electron microprobe, (2) the characteristics of electron-beam-sample inter actions, (3) image formation and interpretation, (4) x-ray spectrometry, and (5) quantitative x-ray microanalysis. Each of these topics has been updated and in most cases expanded over the material presented in PSEM in order to give the reader sufficient coverage to understand these topics and apply the information in the laboratory. Throughout the text, we have attempted to emphasize practical aspects of the techniques, describing those instru ment parameters which the microscopist can and must manipulate to obtain optimum information from the specimen. Certain areas in particular have been expanded in response to their increasing importance in the SEM field. Thus energy-dispersive x-ray spectrometry, which has undergone a tremendous surge in growth, is treated in substantial detail.
Download or read book Advanced Scanning Electron Microscopy and X Ray Microanalysis written by Patrick Echlin and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has its origins in the intensive short courses on scanning elec tron microscopy and x-ray microanalysis which have been taught annually at Lehigh University since 1972. In order to provide a textbook containing the materials presented in the original course, the lecturers collaborated to write the book Practical Scanning Electron Microscopy (PSEM), which was published by Plenum Press in 1975. The course con tinued to evolve and expand in the ensuing years, until the volume of material to be covered necessitated the development of separate intro ductory and advanced courses. In 1981 the lecturers undertook the project of rewriting the original textbook, producing the volume Scan ning Electron Microscopy and X-Ray Microanalysis (SEMXM). This vol ume contained substantial expansions of the treatment of such basic material as electron optics, image formation, energy-dispersive x-ray spectrometry, and qualitative and quantitative analysis. At the same time, a number of chapters, which had been included in the PSEM vol ume, including those on magnetic contrast and electron channeling con trast, had to be dropped for reasons of space. Moreover, these topics had naturally evolved into the basis of the advanced course. In addition, the evolution of the SEM and microanalysis fields had resulted in the devel opment of new topics, such as digital image processing, which by their nature became topics in the advanced course.
Download or read book Handbook of Sample Preparation for Scanning Electron Microscopy and X Ray Microanalysis written by Patrick Echlin and published by Springer Science & Business Media. This book was released on 2011-04-14 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning electr on microscopy (SEM) and x-ray microanalysis can produce magnified images and in situ chemical information from virtually any type of specimen. The two instruments generally operate in a high vacuum and a very dry environment in order to produce the high energy beam of electrons needed for imaging and analysis. With a few notable exceptions, most specimens destined for study in the SEM are poor conductors and composed of beam sensitive light elements containing variable amounts of water. In the SEM, the imaging system depends on the specimen being sufficiently electrically conductive to ensure that the bulk of the incoming electrons go to ground. The formation of the image depends on collecting the different signals that are scattered as a consequence of the high energy beam interacting with the sample. Backscattered electrons and secondary electrons are generated within the primary beam-sample interactive volume and are the two principal signals used to form images. The backscattered electron coefficient ( ? ) increases with increasing atomic number of the specimen, whereas the secondary electron coefficient ( ? ) is relatively insensitive to atomic number. This fundamental diff- ence in the two signals can have an important effect on the way samples may need to be prepared. The analytical system depends on collecting the x-ray photons that are generated within the sample as a consequence of interaction with the same high energy beam of primary electrons used to produce images.
Download or read book X Ray Microscopy written by Chris Jacobsen and published by Cambridge University Press. This book was released on 2019-12-19 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete introduction to x-ray microscopy, covering optics, 3D and chemical imaging, lensless imaging, radiation damage, and applications.
Download or read book Scanning Electron Microscopy and X ray Microanalysis written by Robert Edward Lee and published by Prentice Hall. This book was released on 1993 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: A description of the field of scanning electron microscopy and X-ray microanalysis, including coverage of specimen preparation, electron emission, lenses and electromagnetic fields, specimen-beam interactions, vacuum generation, and energy and wavelength dispersive X-ray spectroscopy.
Download or read book Practical Scanning Electron Microscopy written by Joseph Goldstein and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the spring of 1963, a well-known research institute made a market survey to assess how many scanning electron microscopes might be sold in the United States. They predicted that three to five might be sold in the first year a commercial SEM was available, and that ten instruments would saturate the marketplace. In 1964, the Cambridge Instruments Stereoscan was introduced into the United States and, in the following decade, over 1200 scanning electron microscopes were sold in the U. S. alone, representing an investment conservatively estimated at $50,000- $100,000 each. Why were the market surveyers wrongil Perhaps because they asked the wrong persons, such as electron microscopists who were using the highly developed transmission electron microscopes of the day, with resolutions from 5-10 A. These scientists could see little application for a microscope that was useful for looking at surfaces with a resolution of only (then) about 200 A. Since that time, many scientists have learned to appreciate that information content in an image may be of more importance than resolution per se. The SEM, with its large depth of field and easily that often require little or no sample prepara interpreted images of samples tion for viewing, is capable of providing significant information about rough samples at magnifications ranging from 50 X to 100,000 X. This range overlaps considerably with the light microscope at the low end, and with the electron microscope at the high end.
Download or read book Scanning Electron Microscopy and X ray Microanalysis written by Graham Lawes and published by . This book was released on 1987 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Dispersive X ray Analysis in the Electron Microscope written by DC Bell and published by Garland Science. This book was released on 2003-07-10 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in-depth description of x-ray microanalysis in the electron microscope. It is sufficiently detailed to ensure that novices will understand the nuances of high-quality EDX analysis. Includes information about hardware design as well as the physics of x-ray generation, absorption and detection, and most post-detection data processing. Details on electron optics and electron probe formation allow the novice to make sensible adjustments to the electron microscope in order to set up a system which optimises analysis. It also helps the reader determine which microanalytical method is more suitable for their planned application.
Download or read book X Ray Optics and Microanalysis 1992 Proceedings of the 13th INT Conference 31 August 4 September 1992 Manchester UK written by P.B. Kenway and published by CRC Press. This book was released on 1993-03-01 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first ICXOM congress held in Cambridge was the brain-child of Dr. Ellis Cosslett, founder of the Electron Optics Section of the Cavendish Laboratory. Dr. Cosslett pioneered research in x-ray optics and microanalysis and retained a close interest in all subject applications for this area of research, including physics, materials science, chemistry, and biology. X-Ray Optics and Microanalysis 1992 was held in his memory. At a special symposium, friends and colleagues reviewed the present status of research in x-ray optics and microanalysis. S.J. Pennycook of Oak Ridge National Laboratory, D.B. Williams of Lehigh University, J.A. Venables et al. of Arizona State University and Sussex University, and C. Jacobsen et al. of SUNY, Stony Brook are among the researchers whose papers are included in this volume.
Download or read book Principles and Practice of X Ray Spectrometric Analysis written by E.P. Bertin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first edition of this book was published early in 1970, three major developments have occurred in the field of x-ray spectrochemical analysis. First, wavelength-dispersive spectrometry, in 1970 already securely established among instrumental analytical methods, has matured. Highly sophisticated, miniaturized, modular, solid-state circuitry has replaced elec tron-tube circuitry in the readout system. Computers are now widely used to program and control fully automated spectrometers and to store, process, and compute analytical concentrations directly and immediately from ac cumulated count data. Matrix effects have largely yielded to mathematical treatment. The problems associated with the ultralong-wavelength region have been largely surmounted. Indirect (association) methods have extended the applicability of x-ray spectrometry to the entire periodic table and even to certain classes of compounds. Modern commercial, computerized, auto matic, simultaneous x-ray spectrometers can index up to 60 specimens in turn into the measurement position and for each collect count data for up to 30 elements and read out the analytical results in 1--4 min-all corrected for absorption-enhancement and particle-size or surface-texture effects and wholly unattended. Sample preparation has long been the time-limiting step in x-ray spectrochemical analysis. Second, energy-dispersive spectrometry, in 1970 only beginning to assume its place among instrumental analytical methods, has undergone phenomenal development and application and, some believe, may supplant wavelength spectrometry for most applications in the foreseeable future.
Download or read book Scanning Electron Microscopy X Ray Microanalysis and Analytical Electron Microscopy written by Charles E. Lyman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last four decades remarkable developments have taken place in instrumentation and techniques for characterizing the microstructure and microcomposition of materials. Some of the most important of these instruments involve the use of electron beams because of the wealth of information that can be obtained from the interaction of electron beams with matter. The principal instruments include the scanning electron microscope, electron probe x-ray microanalyzer, and the analytical transmission electron microscope. The training of students to use these instruments and to apply the new techniques that are possible with them is an important function, which. has been carried out by formal classes in universities and colleges and by special summer courses such as the ones offered for the past 19 years at Lehigh University. Laboratory work, which should be an integral part of such courses, is often hindered by the lack of a suitable laboratory workbook. While laboratory workbooks for transmission electron microscopy have-been in existence for many years, the broad range of topics that must be dealt with in scanning electron microscopy and microanalysis has made it difficult for instructors to devise meaningful experiments. The present workbook provides a series of fundamental experiments to aid in "hands-on" learning of the use of the instrumentation and the techniques. It is written by a group of eminently qualified scientists and educators. The importance of hands-on learning cannot be overemphasized.
Download or read book Principles of Analytical Electron Microscopy written by Joseph Goldstein and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication in 1979 of Introduction to Analytical Electron Microscopy (ed. J. J. Hren, J. I. Goldstein, and D. C. Joy; Plenum Press), analytical electron microscopy has continued to evolve and mature both as a topic for fundamental scientific investigation and as a tool for inorganic and organic materials characterization. Significant strides have been made in our understanding of image formation, electron diffraction, and beam/specimen interactions, both in terms of the "physics of the processes" and their practical implementation in modern instruments. It is the intent of the editors and authors of the current text, Principles of Analytical Electron Microscopy, to bring together, in one concise and readily accessible volume, these recent advances in the subject. The text begins with a thorough discussion of fundamentals to lay a foundation for today's state-of-the-art microscopy. All currently important areas in analytical electron microscopy-including electron optics, electron beam/specimen interactions, image formation, x-ray microanalysis, energy-loss spectroscopy, electron diffraction and specimen effects-have been given thorough attention. To increase the utility of the volume to a broader cross section of the scientific community, the book's approach is, in general, more descriptive than mathematical. In some areas, however, mathematical concepts are dealt with in depth, increasing the appeal to those seeking a more rigorous treatment of the subject.
Download or read book Electron Microprobe Analysis and Scanning Electron Microscopy in Geology written by S. J. B. Reed and published by Cambridge University Press. This book was released on 2005-08-25 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 2005, this book covers the closely related techniques of electron microprobe analysis (EMPA) and scanning electron microscopy (SEM) specifically from a geological viewpoint. Topics discussed include: principles of electron-target interactions, electron beam instrumentation, X-ray spectrometry, general principles of SEM image formation, production of X-ray 'maps' showing elemental distributions, procedures for qualitative and quantitative X-ray analysis (both energy-dispersive and wavelength-dispersive), the use of both 'true' electron microprobes and SEMs fitted with X-ray spectrometers, and practical matters such as sample preparation and treatment of results. Throughout, there is an emphasis on geological aspects not mentioned in similar books aimed at a more general readership. The book avoids unnecessary technical detail in order to be easily accessible, and forms a comprehensive text on EMPA and SEM for geological postgraduate and postdoctoral researchers, as well as those working in industrial laboratories.
Download or read book Laboratory Micro X Ray Fluorescence Spectroscopy written by Michael Haschke and published by Springer Science & Business Media. This book was released on 2014-05-08 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-X-ray fluorescence offers the possibility for a position- sensitive and non-destructive analysis that can be used for the analysis of non-homogeneous materials and layer systems. This analytical technique has shown a dynamic development in the last 15 years and is used for the analysis of small particles, inclusions, of elemental distributions for a wide range of different applications both in research and quality control. The first experiments were performed on synchrotrons but there is a requirement for laboratory instruments which offers a fast and immediate access for analytical results. The book discuss the main components of a μ-XRF instrument and the different measurement modes, it gives an overview about the various instruments types, considers the special requirements for quantification of non-homogeneous materials and presents a wide range of application for single point and multi-point analysis as well as for distribution analysis in one, two and three dimensions.
Download or read book Handbook for cleaning decontamination of surfaces written by Ingegard Johansson and published by Elsevier. This book was released on 2007-06-20 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of Handbook for Cleaning/Decontamination of Surfaces lies on cleaning and decontamination of surfaces and solid matter, hard as well as soft. Bringing together in a 2-volume reference source: - current knowledge of the physico-chemical fundamentals underlying the cleaning process; - the different needs for cleaning and how these needs are met by various types of cleaning processes and cleaning agents, including novel approaches; - how to test that cleaning has taken place and to what extent; - the effects of cleaning on the environment; - future trends in cleaning and decontamination, for example the idea of changing surfaces, to hinder the absorbance of dirt and thus make cleaning easier.A brief introduction is given to the legal demands concerning the environment and a historical background, in terms of development of detergents, from soaps to the modern sophisticated formulations. Bactericides, their use and the environmental demands on them are covered. Thorough discussions of mechanisms for cleaning are given in several chapters, both general basic concepts and special cases like particle cleaning and cleaning using microemulsion concepts.* General understanding of how cleaning works, function of ingredients and formulations * Overview of environmental issues and demands from the society in the area * Gives basic formulas for cleaning preparations in most areas
Download or read book Scanning Electron Microscopy written by Ludwig Reimer and published by Springer. This book was released on 2013-11-11 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning Electron Microscopy provides a description of the physics of electron-probe formation and of electron-specimen interactions. The different imaging and analytical modes using secondary and backscattered electrons, electron-beam-induced currents, X-ray and Auger electrons, electron channelling effects, and cathodoluminescence are discussed to evaluate specific contrasts and to obtain quantitative information.
Download or read book Nanotechnology in Diagnosis Treatment and Prophylaxis of Infectious Diseases written by Mahendra Rai and published by Academic Press. This book was released on 2015-05-23 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology in Diagnosis, Treatment and Prophylaxis of Infectious Diseases delivers comprehensive coverage of the application of nanotechnology to pressing problems in infectious disease. This text equips readers with cutting-edge knowledge of promising developments and future prospects in nanotechnology, paying special attention to microbes that are now resistant to conventional antibiotics, a concerning problem in modern medicine. Readers will find a thorough discussion of this new approach to infectious disease treatment, including the reasons nanotechnology presents a promising avenue for the diagnosis, treatment, and prophylaxis of infectious diseases. - Provides a comprehensive overview of the use of nanotechnology in the treatment and diagnosis of infectious diseases - Covers all common types of infective agents, including bacteria, viruses, fungi, and protozoa, along with their vectors, ticks, mosquitoes, flies, etc. - Delivers commentary from an international researcher base, providing insights across differing economic statuses - Includes a foundation of basic nanotechnological concepts to aid in designing new strategies to combat several pathogenic diseases and cancer - Illustrates the high antimicrobial potential of nanoparticles, ultimately demonstrating how they are a promising alternative class that can be successfully used in fighting a myriad of infections
