Download or read book Woven Composites written by M H Ferri Aliabadi and published by World Scientific. This book was released on 2015-02-09 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique volume presents the latest developments in the field of advanced woven and braided textile composites, with particular emphasis on computational approaches (finite elements, meshfree). Advanced textile composites such as woven, braided, knitted and stitched fabrics are increasingly being used as structural materials in industrial applications due to their efficiency at reinforcing more directions within a single layer and their ability to conform to surfaces with complex curvatures. Furthermore, textile composites provide improved impact resistance, exceptional thermal, fatigue and corrosion resistance, as well as being easier and cheaper to handle and fabricate compared to UD composites.Topics covered in this book include: 2D and 3D plain, twill, satin woven and braided composites, micro-level and macro-level modelling, failure mechanisms, theoretical studies on cryogenic crack behaviour and the specific deformation modes of textile reinforcements, which include the kinematic and hypoelastic models.This book will be particularly relevant to professional engineers, graduate students and researchers interested in composite materials.
Download or read book Woven Composites written by M. H. Aliabadi and published by Computational and Experimental Methods in Structures. This book was released on 2015 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique volume presents the latest developments in the field of advanced woven and braided textile composites, with particular emphasis on computational approaches (finite elements, meshfree). Advanced textile composites such as woven, braided, knitted and stitched fabrics are increasingly being used as structural materials in industrial applications due to their efficiency at reinforcing more directions within a single layer and their ability to conform to surfaces with complex curvatures. Furthermore, textile composites provide improved impact resistance, exceptional thermal, fatigue and corrosion resistance, as well as being easier and cheaper to handle and fabricate compared to UD composites. Topics covered in this book include: 2D and 3D plain, twill, satin woven and braided composites, micro-level and macro-level modelling, failure mechanisms, theoretical studies on cryogenic crack behaviour and the specific deformation modes of textile reinforcements, which include the kinematic and hypoelastic models. This book will be particularly relevant to professional engineers, graduate students and researchers interested in composite materials.
Download or read book 3D Fibre Reinforced Polymer Composites written by L. Tong and published by Elsevier. This book was released on 2002-11-20 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibre reinforced polymer (FRP) composites are used in almost every type of advanced engineering structure, with their usage ranging from aircraft, helicopters and spacecraft through to boats, ships and offshore platforms and to automobiles, sports goods, chemical processing equipment and civil infrastructure such as bridges and buildlings. The usage of FRP composites continues to grow at an impessive rate as these materials are used more in their existing markets and become established in relatively new markets such as biomedical devices and civil structures. A key factor driving the increased applications of composites over the recent years is the development of new advanced forms of FRP materials. This includes developments in high performance resin systems and new styles of reinforcement, such as carbon nanotubes and nanoparticles. This book provides an up-to-date account of the fabrication, mechanical properties, delamination resistance, impact tolerance and applications of 3D FRP composites. The book focuses on 3D composites made using the textile technologies of weaving, braiding, knitting and stiching as well as by z-pinning.
Download or read book Recent Developments in the Field of Carbon Fibers written by Rita Khanna and published by BoD – Books on Demand. This book was released on 2018-07-25 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon fibres are lightweight, chemically stable materials with high mechanical strength, and have state-of-the-art applications in aerospace, marine, construction and automotive sectors. The demand for carbon fibre?based components is expected to grow dramatically with expanding opportunities for lightweight metals and composites. Although this field has achieved a high level of maturity, nanoscale developments in carbon fibres have seen dramatic improvements in the functions of conventional biomaterials and composites. This book reveals several new developments in the field to enhance characteristics of carbon fibres and their composites, novel applications for tissue engineering, biological scaffoldings and implants, recycling and reuse of end-of-life CFRP and manufacturing waste and other issues of concern in the field of carbon fibres.
Download or read book Woven Fabric Engineering written by Polona Dobnik Dubrovski and published by BoD – Books on Demand. This book was released on 2010-11-18 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main goal in preparing this book was to publish contemporary concepts, new discoveries and innovative ideas in the field of woven fabric engineering, predominantly for the technical applications, as well as in the field of production engineering and to stress some problems connected with the use of woven fabrics in composites. The advantage of the book Woven Fabric Engineering is its open access fully searchable by anyone anywhere, and in this way it provides the forum for dissemination and exchange of the latest scientific information on theoretical as well as applied areas of knowledge in the field of woven fabric engineering. It is strongly recommended for all those who are connected with woven fabrics, for industrial engineers, researchers and graduate students.
Download or read book Design and Manufacture of Textile Composites written by A C Long and published by CRC Press. This book was released on 2006-01-05 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textile composites encompass a rather narrow range of materials, based on three-dimensional reinforcements produced using specialist equipment. This book describes the design, manufacture and applications of textile composites. The intention is to describe the broad range of polymer composite materials with textile reinforcements, from woven and non-crimp commodity fabrics to 3-D textiles and their applications. The book gives particular attention to the modelling of textile structures, composites manufacturing methods, and subsequent component performance. This practical book is an invaluable guide for manufacturers of polymer composite components, end-users and designers, structural materials researchers, and textile manufacturers involved in the development of new products with textile composites.
Download or read book Proceedings of the American Society for Composites Seventeenth Technical Conference written by C. T. Sun and published by CRC Press. This book was released on 2002-10-24 with total page 1685 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue in Composites written by Bryan Harris and published by Woodhead Publishing. This book was released on 2003-10-31 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: A survey of work on the fatigue behavior of composites dealing with the problems met with by materials scientists and designers in aerospace, automotive, marine, and structural engineering. Including a historical review, standards, micromechanical aspects, life-prediction methods for constant stress and variable stress, and fatigue in practical situations.
Download or read book Fundamentals of Composites Manufacturing Second Edition written by A. Brent Strong and published by Society of Manufacturing Engineers. This book was released on 2008 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes advances, key information, case studies, and examples that can broaden your knowledge of composites materials and manufacturing methods. This text deals with composites manufacturing methods, providing tips for getting the best results that weigh the required material properties against cost and production efficiency. An Instructor's Guide is also available.
Download or read book Composites Engineering Handbook written by P.K. Mallick and published by CRC Press. This book was released on 1997-03-19 with total page 1270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers information on the fundamental principles, processes, methods and procedures related to fibre-reinforced composites. The book presents a comparative view, and provides design properties of polymeric, metal, ceramic and cement matrix composites. It also gives current test methods, joining techniques and design methodologies.
Download or read book Non Crimp Fabric Composites written by Stepan V Lomov and published by Elsevier. This book was released on 2011-04-19 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-crimp fabric (NCF) composites are reinforced with mats of straight (non-crimped) fibres, giving them such advantages as strength, ease of handling and low manufacturing costs. Non-crimp fabric composites provides a comprehensive review of the use of NCF composites, their manufacture and applications in engineering.Part one covers the manufacture of non-crimp fabrics, including also topics such as structural stitching and automated defect analysis. Part two goes on to discuss the manufacture of non-crimp fabric composites, with chapters covering such topics as deformability and permeability of NCF. Part three focuses on the properties of NCF composites, with chapters on stiffness and strength, damage progression and fatigue. Finally, part four covers the applications of NCF composites, including chapters on the aerospace and automotive industries as well as wind turbines and helicopter applications. The book concludes with a discussion of cost analysis of NCF composites in engineering applications.With its distinguished editor and international team of expert contributors, Non-crimp fabric composites is an essential reference for composite manufacturers and structural and mechanical engineers in industries using NCF composites, as well as academics with a research interest in the field. - Provides a comprehensive review of the use of NCF composites, their manufacture and applications in engineering - Reviews the manufacture of non-crimp fabrics, including also topics such as structural stitching and automated defect analysis - Examines the properties of NCF composites considering stiffness and strength, damage progression and fatigue
Download or read book 3 D Textile Reinforcements in Composite Materials written by A Miravete and published by Woodhead Publishing. This book was released on 1999-08-09 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laminated composite materials have been used since the 1960s for structural applications. This first generation of materials were successful because of the materials' high stiffness and strength performance. The aims of this book are to describe the manufacturing processes, to highlight the advantages, to identify the main applications, to analyse the methods for prediction of mechanical properties and to focus on the key technical aspects of these materials in order to discover how better to exploit their characteristics and to overcome their disadvantages in relation to the laminated composite materials.This book covers many areas related to 3-D fabric textile technologies, and manufacturing is treated as a key issue. Theoretical aspects of micro- and macromechanics are covered in depth, as well as properties and behaviour. Specific techniques including braiding, stitching and knitting are described and compared in order to evaluate the most attractive configurations available at the moment. Present and future applications and trends are described to illustrate that 3-D textiles are part of the real industrial world not only today but tomorrow as well.
Download or read book Design and Manufacture of Structural Composites written by Lee Harper and published by Woodhead Publishing. This book was released on 2022-11-30 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Manufacture of Structural Composites provides an overview of the main manufacturing challenges encountered when processing fibre-reinforced composite materials. Composites are unique in that the material is created at the same time as the structure, forming a very close link between the constituents, the manufacturing process and the resulting mechanical performance. This book takes an in-depth look at material choices and the intermediate steps required to convert different fibre and matrix combinations into finished products. It provides an insight into recent developments for each of the manufacturing processes covered, addressing design, cost, rate and mechanical performance. Topics covered include an introduction to composite materials, material preforming and conversion, moulding, digital design and sustainability, which addresses waste reduction, disassembly and fibre recovery. This book has been developed primarily as a teaching resource with contributions from leading experts in the field. The content has evolved from courses given by the authors to mechanical engineering and materials science students, at both undergraduate and postgraduate levels. It also draws upon experience gained during research projects and from leading industry experts. It therefore provides non-specialists with a valuable introduction to composite manufacturing techniques, helping to determine the most suitable manufacturing routes and to understand the challenges associated with the production of high-performance composite components. - Provides an overview of the most common manufacturing routes for fibre reinforced composites, including the influence of the manufacturing route on mechanical properties, production volume and component cost - Discusses recent advances in composite manufacturing, including the use of automation, process simulation, digital factories, and solutions to improve sustainability - Looks at where the composites sector is heading and discusses some of the challenges faced by end-users looking to scale up production and increase the uptake of fibre-reinforced composites for structural applications
Download or read book Recent Advances in Textile Composites written by Christophe Binetruy and published by DEStech Publications, Inc. This book was released on 2010 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Composites written by Viktor Gribniak and published by MDPI. This book was released on 2021-06-02 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering practice has revealed that innovative technologies’ structural applications require new design concepts related to developing materials with mechanical properties tailored for construction purposes. This would allow the efficient use of engineering materials. The efficiency can be understood in a simplified and heuristic manner as the optimization of performance and the proper combination of structural components, leading to the consumption of the least amount of natural resources. The solution to the eco-optimization problem, based on the adequate characterization of the materials, will enable implementing environmentally friendly engineering principles when the efficient use of advanced materials guarantees the required structural safety. Identifying fundamental relationships between the structure of advanced composites and their physical properties is the focus of this book. The collected articles explore the development of sustainable composites with valorized manufacturability corresponding to Industrial Revolution 4.0 ideology. The publications, amongst others, reveal that the application of nano-particles improves the mechanical performance of composite materials; heat-resistant aluminium composites ensure the safety of overhead power transmission lines; chemical additives can detect the impact of temperature on concrete structures. This book demonstrates that construction materials’ choice has considerable room for improvement from a scientific viewpoint, following heuristic approaches.
Download or read book FRP Composites in Civil Engineering written by Jin-Guang Teng and published by Taylor & Francis. This book was released on 2001-11-15 with total page 998 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings contains the papers presented at the International Conference on FRP Composites in Civil Engineering, held in Hong Kong, China, on 12-15 December 2001. The papers, contributed from 24 countries, cover a wide spectrum of topics and demonstrate the recent advances in the application of FRP (Fibre-reinforced polymer) composites in civil engineering, while pointing to future directions of research in this exciting area.
Download or read book Durability and Life Prediction in Biocomposites Fibre Reinforced Composites and Hybrid Composites written by Mohammad Jawaid and published by Woodhead Publishing. This book was released on 2018-09-13 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Durability and Life Prediction in Biocomposites, Fibre-Reinforced Composites and Hybrid Composites focuses on the advanced characterization techniques used for the analysis of composite materials developed from natural fiber/biomass, synthetic fibers and a combination of these materials used as fillers and reinforcements to enhance materials performance and utilization in automotive, aerospace, construction and building components. The book presents key aspects of fracture and failure in natural/synthetic, fiber reinforced, polymer based composite materials, ranging from crack propagation, to crack growth, and from notch-size effect, to damage-tolerant design. Written by leading experts in the field, and covering composite materials developed from different natural fibers and their hybridization with synthetic fibers, the book's chapters provide cutting-edge, up-to-date research on the characterization, analysis and modelling of composite materials. - Contains contributions from leading experts in the field - Discusses recent progress on failure analysis, SHM, durability, life prediction and the modelling of damage in natural fiber-based composite materials - Covers experimental, analytical and numerical analysis - Provides detailed and comprehensive information on mechanical properties, testing methods and modelling techniques
