Download or read book Hot Stamping Advanced Manufacturing Technology of Lightweight Car Body written by Ping Hu and published by Springer. This book was released on 2016-10-14 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the advanced manufacturing technology of original innovations in hot stamping of lightweight car body. A detailed description of the technical system and basic knowledge of sheet metal forming is given, which helps readers quickly understand the relevant knowledge in the field. Emphasis has been placed on the independently developed hot stamping process and equipment, which help describe the theoretical and experimental research on key problems involving stress field, thermal field and phase transformation field in hot stamping process. Also, a description of the formability at elevated temperature and the numerical simulation algorithms for high strength steel hot stamping is given in combination with the experiments. Finally, the book presents some application cases of hot stamping technology such as the lightweight car body design using hot stamping components and gradient hardness components, and the cooling design of the stamping tool. This book is intended for researchers, engineers and graduate students in vehicle engineering, mechanical engineering, especially in the field of advanced manufacturing technology. The book also provides a useful reference for other new technology related temperature and phase transformation, such as aluminum-magnesium alloy hot stamping.

Download or read book The Complete Technology Book on Hot Rolling of Steel written by NIIR Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2010-01-01 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: The hot rolling technology is the most widely used method of shaping metals and is particularly important in the manufacture of steel for use in construction and other industries. In metalworking, rolling is a metal forming process in which metal stock is passed through a pair of rolls. Rolling is classified according to the temperature of the metal rolled. If the temperature of the metal is above its re crystallization temperature, then the process is termed as hot rolling. The hot mills using plain rolls were already being employed by the end of the seventeenth century. But the industrial revolution in the nineteenth century saw a new horizon in steel making process, with the considerably expanded markets for rods, rails and structural section, provided further impetus to the development of hot rolling. The basic use of hot rolling mills is to shape up the larger pieces of billets and slabs into narrow and desired forms. These metal pieces are heated over their re crystallization temperature and are then moved between the rollers so as to form thinner cross sections. Hot rolling mill thus helps in reducing the size of a metal thereby molding it into the desired form and shape. Rolling mills perform the function to reform the metal pieces such as billet and ingot whilst maintaining its well equipped micro structure into bar, wire, sheet, strip, and plate. Hot rolled products are frequently categorized into plain carbon, alloy, high strength alloy, dual phase, electrical and stainless steels. This book provides a descriptive illustration of pre treatment of hot metal, the basic principles of heat treatment, types of hot rolled products, principles of measurement of rolling parameters, steel making refractories, performance characteristics of transducers, causes of gauge variation , main factors affecting gauge performance, gauge control sensors and actuators, automatic gauge control systems, strip tension control system in cold mills, flat rolling practice cold rolling, pack rolling, steelmaking refractories, refining of stainless steels, special considerations in refining stainless steels etc. This book is a unique compilation and it draws together in a single source technical principles of steel making by hot rolling process up to the finished product. This handbook will be very helpful to its readers who are just beginners in this field and will also find useful for upcoming entrepreneurs, engineers, personnel responsible for the operation of hot rolling mills, existing industries, technologist, technical institution etc. TAGS Steel Hot Rolling, Hot Rolling of Steel, Metal Rolling, Metal Forming Process, Steel Rolling Process, Metalworking, Flat Rolling Fundamentals, Physical Metallurgy, Hot Rolled Steel, Rolling Mills, Pre-Treatment of Hot Metal, Heat Treatments for Hot-Rolled Products, Steelmaking Refractories, Refining of Stainless Steels, Steel Heating for Hot Rolling, Oxygen Steelmaking Processes, Best small and cottage scale industries, Business guidance for steel rolling industry, Business Plan for a Startup Business, Business plan for steel rolling mill, Business start-up, Fusion welding processes, Great Opportunity for Startup, Hot rolled steel properties, Hot rolling mill process, Hot Rolling Mill, Hot Rolling mill, Hot Strip Mill, How is Steel Produced, How to Start a Steel Production Business, How to start a successful steel rolling business, How to start steel mill industry, How to Start Steel rolling Industry in India, How to start steel rolling mill, Indian Steel Industry, Industrial steel rolling mill, Modern small and cottage scale industries, Modern steel making technology, Most Profitable Steel Business Ideas, New small scale ideas in Steel rolling industry, Opportunity Steel Rolling Mill, Plate Mill, Process & Applications, Process of steelmaking, Profitable small and cottage scale industries, Progress and Prospect of Rolling Technology, Project for startups, Rod and Bar Rolling, Rod and bar rolling, Rolling Metalworking, Rolling Mill for Steel Bars, Rolling process, Setting up and opening your steel rolling Business, Small scale Commercial steel rolling business, Small Scale Steel rolling Projects, Small Start-up Business Project, Start a Rolling Mill Industry, Start steel rolling mill in India, Start up India, Stand up India, Starting a Steel Business, Starting a Steel rolling Business, Starting Steel Mini Mill, Start-up Business Plan for steel rolling, Startup Project for steel rolling business, Startup project plan, Startup Project, Steel and hot rolling Business, Steel Based Profitable Projects, Steel Based Small Scale Industries Projects, Steel business plan, Steel hot rolling process, Steel Industry in India, Steel making and rolling, Steel making Projects, Steel making technology, Steel Making, Steel manufacturing process, Steel mill process, Steel mill, Steel production process, Steel rerolling mill feasibility start up, Steel rolling Industry in India, Steel rolling machine factory, Steel rolling mill industry demand, Steel rolling mill industry overview, Steel rolling mill industry, Steel rolling mill market forecast, Steel rolling mill market growth, Steel rolling mill market, Steel rolling mill size, Steel rolling mill starts production, Steel rolling mill, Steel Rolling Technology, Steelmaking, Steelmaking Processes, Types of rolling mills

Download or read book Technology of Pressure Sensitive Adhesives and Products written by Istvan Benedek and published by CRC Press. This book was released on 2008-11-10 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discussing the manufacture technology of pressure-sensitive adhesive and products, Volume 2 of the Handbook of Pressure-Sensitive Adhesives and Products includes the synthesis of pressure-sensitive raw mater

Download or read book Modeling and Optimization in Manufacturing written by Catalin I. Pruncu and published by John Wiley & Sons. This book was released on 2021-04-21 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the state-of-the-art in multiscale modeling and optimization in manufacturing from two leading voices in the field Modeling and Optimization in Manufacturing delivers a comprehensive approach to various manufacturing processes and shows readers how multiscale modeling and optimization processes help improve upon them. The book elaborates on the foundations and applications of computational modeling and optimization processes, as well as recent developments in the field. It offers discussions of manufacturing processes, including forming, machining, casting, joining, coating, and additive manufacturing, and how computer simulations have influenced their development. Examples for each category of manufacturing are provided in the text, and industrial applications are described for the reader. The distinguished authors also provide an insightful perspective on likely future trends and developments in manufacturing modeling and optimization, including the use of large materials databases and machine learning. Readers will also benefit from the inclusion of: A thorough introduction to the origins of manufacturing, the history of traditional and advanced manufacturing, and recent progress in manufacturing An exploration of advanced manufacturing and the environmental impact and significance of manufacturing Practical discussions of the economic importance of advanced manufacturing An examination of the sustainability of advanced manufacturing, and developing and future trends in manufacturing Perfect for materials scientists, mechanical engineers, and process engineers, Modeling and Optimization in Manufacturing will also earn a place in the libraries of engineering scientists in industries seeking a one-stop reference on multiscale modeling and optimization in manufacturing.

Download or read book Technology of Beet Sugar Manufacture written by Great Western Sugar Company and published by . This book was released on 1920 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Production at the Leading Edge of Technology written by Thomas Bauernhansl and published by Springer Nature. This book was released on 2023-11-17 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: The German Academic Association for Production Technology (WGP) annually invites researchers coming from its institutes and from industry to contribute peer reviewed papers in the field of production technology. This congress proceedings provides recent research results and findings on leading-edge manufacturing processes. Main aim of this scientific congress is to push forward existing borders in production and to provide novel solutions of "Production at the Leading Edge of Manufacturing Technology. The subtitle “Technology-Based Sustainable Production for Circular Economy” of this year’s congress emphasizes challenges for global productions in the light of climate change and resource scarcity. Different sessions were held on the topics Environmentally neutral production (e.g. energy and material efficiency) Resilient Value Creation Systems Biointelligence Digitization as an Enabler for Sustainable Production Production Technologies for a Circular Economy

Download or read book Hot Property written by Pat Choate and published by Knopf. This book was released on 2007-12-18 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of pirating and counterfeiting has grown from small-scale imitations of Levi’s jeans and Zippo lighters to a phenomenon that costs the United States an estimated $200 billion dollars per year. Pirated DVDs, computer software, designer clothes, and machinery flood global markets, inflicting heavy losses on U.S. businesses, while counterfeit medicines, auto and aircraft parts, and baby formula regularly cause fatalities around the world. The theft of artistic and scientific creation is draining our economy. It is the great economic crime of the twenty-first century. Pat Choate, the author of the best-selling Agents of Influence, examines the roots of conflicts over intellectual property and how the establishment of patent and copyright protections helped propel the American economy. He interweaves the stories of Eli Whitney, Alexander Graham Bell, and Thomas Edison to illustrate how the United States transformed itself from a largely agricultural society into a manufacturing, scientific, and technological superpower, giving rise to further copyright and patent protection laws. He traces the emergence of Germany, Japan, and China as rivals to American primacy through copying, counterfeiting, and underpricing American products and media. He reveals the shockingly meager effectiveness of current efforts to defend American businesses, inventors, and artists from corporate espionage. And he sounds a powerfully convincing warning that the general indifference of our government toward the security of American intellectual property is already affecting job security and the economy in general (an estimated $24 billion is lost each year to pirated films, music recordings, books, and other merchandise in China alone). Hot Property is an impassioned, clear-eyed, and sound assessment of one of the most serious problems facing the American economy today, certain to be one of the most widely discussed books of the year.

Download or read book Theories Methods and Numerical Technology of Sheet Metal Cold and Hot Forming written by Ping Hu and published by Springer Science & Business Media. This book was released on 2012-07-23 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last 15 years, the application of innovative steel concepts in the automotive industry has increased steadily. Numerical simulation technology of hot forming of high-strength steel allows engineers to modify the formability of hot forming steel metals and to optimize die design schemes. Theories, Methods and Numerical Technology of Sheet Metal Cold and Hot Forming focuses on hot and cold forming theories, numerical methods, relative simulation and experiment techniques for high-strength steel forming and die design in the automobile industry. Theories, Methods and Numerical Technology of Sheet Metal Cold and Hot Forming introduces the general theories of cold forming, then expands upon advanced hot forming theories and simulation methods, including: the forming process, constitutive equations, hot boundary constraint treatment, and hot forming equipment and experiments. Various calculation methods of cold and hot forming, based on the authors’ experience in commercial CAE software for sheet metal forming, are provided, as well as a discussion of key issues, such as hot formability with quenching process, die design and cooling channel design in die, and formability experiments. Theories, Methods and Numerical Technology of Sheet Metal Cold and Hot Forming will enable readers to develop an advanced knowledge of hot forming, as well as to apply hot forming theories, calculation methods and key techniques to direct their die design. It is therefore a useful reference for students and researchers, as well as automotive engineers.

Download or read book Isotopes and Radiation Technology written by and published by . This book was released on 1967 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Renewable Energy Sources Engineering Technology Innovation written by Marek Wróbel and published by Springer. This book was released on 2019-07-16 with total page 1059 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents peer-reviewed papers based on the oral and poster presentations during the 5th International Conference on Renewable Energy Sources, which was held from June 20 to 22, 2018 in Krynica, Poland. The scope of the conference included a wide range of topics in renewable energy technology, with a major focus on biomass, solar energy and geothermal energy, but also extending to heat pumps, fuel cells, wind energy, energy storage, and the modelling and optimization of renewable energy systems. This edition of the conference had a special focus on the role of renewable energy in the reduction of air pollution in the Eastern European region. Traditionally this conference is a unique occasion for gathering Polish and international researchers’ perspectives on renewable energy sources, and furthermore of balancing them against governmental policy considerations. Accordingly, the conference offered also panels to discuss best practices and solutions with local entrepreneurs and federal government bodies. The meeting attracts not only scientist but also industry representatives as well as local and federal government personnel. In 2018, the conference was organized by the University of Agriculture in Krakow in cooperation with AGH University of Science and Technology (Krakow), University of Žilina, Silesian University of Technology, International Commission of Agricultural and Biosystems Engineering (CIGR) and Polish Society of Agricultural Engineering. Honorary auspices were given by the Ministry of Science and Higher Education Republic of Poland, Rector of the University of Agriculture in Krakow and Rector of the AGH University of Science and Technology.

Download or read book Production at the Leading Edge of Technology written by Bernd-Arno Behrens and published by Springer Nature. This book was released on 2021-09-04 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: This congress proceedings provides recent research on leading-edge manufacturing processes. The aim of this scientific congress is to work out diverse individual solutions of "production at the leading edge of technology" and transferable methodological approaches. In addition, guest speakers with different backgrounds will give the congress participants food for thoughts, interpretations, views and suggestions. The manufacturing industry is currently undergoing a profound structural change, which on the one hand produces innovative solutions through the use of high-performance communication and information technology, and on the other hand is driven by new requirements for goods, especially in the mobility and energy sector. With the social discourse on how we should live and act primarily according to guidelines of sustainability, structural change is gaining increasing dynamic. It is essential to translate politically specified sustainability goals into socially accepted and marketable technical solutions. Production research is meeting this challenge and will make important contributions and provide innovative solutions from different perspectives.

Download or read book The Mineral Industry Its Statistics Technology and Trade written by Richard Pennefather Rothwell and published by . This book was released on 1905 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pharmaceutical Extrusion Technology written by Isaac Ghebre-Sellassie and published by CRC Press. This book was released on 2018-03-05 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Pharmaceutical Extrusion Technology, published in 2003, was deemed the seminal book on pharmaceutical extrusion. Now it is expanded and improved, just like the usage of extrusion has expanded, improved and evolved into an accepted manufacturing technology to continuously mix active pharmaceutical ingredients with excipients for a myriad of traditional and novel dosage forms. Pharmaceutical Extrusion Technology, Second Edition reflects how this has spawned numerous research activities, in addition to hardware and process advancements. It offers new authors, expanded chapters and contains all the extrusion related technical information necessary for the development, manufacturing, and marketing of pharmaceutical dosage forms. Key Features: Reviews how extrusion has become an accepted technology to continuously mix active pharmaceutical ingredients with excipients Focuses on equipment and process technology Explains various extrusion system configurations as a manufacturing methodology for a variety of dosage forms Presents new opportunities available only via extrusion and future trends Includes contributions of experts from the process and equipment fields

Download or read book S 2470 the Steel and Aluminum Energy Conservation and Technology Conservation and Technology Competitiveness Act of 1988 written by United States. Congress. House. Committee on Science, Space, and Technology. Subcommittee on Science, Research, and Technology and published by . This book was released on 1988 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 14th International Conference on the Technology of Plasticity Current Trends in the Technology of Plasticity written by Katia Mocellin and published by Springer Nature. This book was released on 2023-08-19 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of metal forming, as presented by leading international researchers and engineers at the 14th International Conference on Technology of Plasticity (ICTP), held in Mandelieu-La Napoule, France on September 24-29, 2023. It covers a diverse range of topics such as manufacturing processes & equipment, materials behavior and characterization, microstructure design by forming, surfaces & interfaces, control & optimization, green / sustainable metal forming technologies, digitalization & AI in metal forming, multi-material processing, agile / flexible metal forming processes, forming of non-metallic materials, micro-forming and luxury applications. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.

Download or read book Hot Metal Production by Smelting Reduction of Iron Oxide written by AMIT CHATTERJEE and published by PHI Learning Pvt. Ltd.. This book was released on 2014-04-03 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, in its second edition, continues to offer a comprehensive treatise on smelting reduction of iron oxide—an emerging alternative method of producing hot metal without using coke. This technique is being increasingly used for hot metal production, which has till date, been dominated by the traditional blast furnace method. Shortage of coking coal, high cost of coke and the recent enforcement of stricter environmental regulations have resulted in the advent of smelting reduction as a supplementary method of hot metal production. The book covers the details of this rapidly emerging method that holds particular relevance for countries like India, endowed with relatively large reserves of high grade iron ore but unfortunately, not matched by the availability of coking coal. The book offers an in-depth analysis of the theoretical as well as the practical aspects of smelting reduction. It begins by acquainting the readers with the current worldwide status of ironmaking, followed by the classification of the various smelting reduction processes. It then focuses on explaining the fundamentals of smelting reduction before proceeding with a critical appraisal of the various smelting reduction processes that are currently available. The future of this methodology in India and in the rest of the world is discussed in the concluding chapter. The book contains numerous illustrations to provide a clear understanding of the different processes, equipment and quality parameters relevant to smelting reduction-based ironmaking. The book is intended mainly for undergraduate and postgraduate engineering (particularly metallurgical engineering) students seeking an insight into this emerging ironmaking technology. It would also be of immense interest to researchers and technologists engaged in the subject of smelting reduction of iron oxide. A variety of chapter-end references would enable teachers and students to get acquainted with the extensive knowledge already available in this field. HIGHLIGHTS OF SECOND EDITION • Two new sections on HIsarna process and Circosmelt process have been incorporated. • New figures and tables have been used in some sections to illustrate the concepts with better clarity and give the up-to-date information. • Some references have also been added, making the text suitable for further study.

Download or read book Tribology and Surface Engineering for Industrial Applications written by Catalin I. Pruncu and published by CRC Press. This book was released on 2021-11-23 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is a multidisciplinary science that encompasses mechanical engineering, materials science, surface engineering, lubricants, and additives chemistry with tremendous applications. Tribology and Surface Engineering for Industrial Applications discusses the latest in tribology and surface engineering for industrial applications. This book: Offers information on coatings and surface diagnostics Explains a variety of techniques for improved performance Describes applications in automotive, wheel and rail materials, manufacturing, and wind turbines Written for researchers and advanced students, this book encompasses a wide-ranging view of the latest in industrial applications of tribology and surface engineering for a variety of cross-disciplinary applications.