Download or read book Working Towards Just in Time written by A.D. Dear and published by Springer Science & Business Media. This book was released on 1988-06-30 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anthony Dear argues that just-in-time is essentially a philosophy rather than a rigid methodology and that the important thing is to grasp the fundamental ideas involved and then to see where, how and to what extent they can be applied in the context of any particular enterprise.
Download or read book Just in Time Factory written by José Luís Quesado Pinto and published by Springer. This book was released on 2018-06-26 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the implementation of just in time (JIT) production in an industrial context, while also highlighting the application of various, vital lean production tools. Shifting the trade-off between productivity and quality, the book discusses the preparation stages needed before implementing a JIT system. After an introduction to lean manufacturing and JIT, it introduces readers to the fundamentals and practice of Kaizen, paying special attention to lean manufacturing tools. The book demonstrates how to use the 5S approach (with the stages of Seiri, Seiton, Seiso, Seiketsu and Shitsuke), Standardized Work, Single Minute Exchange of Die (SMED) and the Kanban system. In brief, the book provides an understanding of the processes associated with the application of these tools and highlights the benefits attained by companies that have implemented JIT systems. Throughout the book, a real-world case study is used to deepen readers’ understanding of how lean manufacturing tools can be implemented. The book is ideally suited for executive courses in industrial engineering and management, but can also be used for upper undergraduate and graduate courses at universities.
Download or read book Machine that Changed the World written by James P. Womack and published by Simon and Schuster. This book was released on 1990 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Draws conclusions for the future of the industry in the USA.
Download or read book Just in Time Manufacturing written by T.C. Cheng and published by Springer. This book was released on 1993 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses three fundamental building blocks of JIT, namely setting up a JIT production system, improving quality, and instilling total employee involvement. JIT implementation issues are covered and supported by an industrial case study.
Download or read book Encyclopedia of Production and Manufacturing Management written by Paul M. Swamidass and published by Springer Science & Business Media. This book was released on 2000-06-30 with total page 833 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production and manufacturing management since the 1980s has absorbed in rapid succession several new production management concepts: manufacturing strategy, focused factory, just-in-time manufacturing, concurrent engineering, total quality management, supply chain management, flexible manufacturing systems, lean production, mass customization, and more. With the increasing globalization of manufacturing, the field will continue to expand. This encyclopedia's audience includes anyone concerned with manufacturing techniques, methods, and manufacturing decisions.
Download or read book Just In Time Manufacturing written by Edward J. Hay and published by . This book was released on 1988-01-18 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Just-in-time production (JIT) is receiving widespread recognition among U.S. executives as the manufacturing system that helped make Japan our major competitor. With its proven capacity to streamline the manufacturing process, lower inventory, and improve product quality and ROI, JIT may be the basis for a renaissance in American manufacturing. This book details exactly what JIT is, how to implement it, and how to make it work in the context of American business and culture. In clear, practical terms, it discusses how to assess opportunities for change with JIT, how to develop and plan the necessary changes in production and management, and ways of motivating middle management and other employees in a JIT system. Relying on examples of companies that have implemented JIT--including cutting-edge firms such as Hewlett-Packard--The Just-in-Time Breakthrough clears up several misconceptions about the process while providing managers with models for putting it into action.
Download or read book Kanban written by Japan Management Association and published by Routledge. This book was released on 2018-02-06 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Este libro ofrece una introducci?n clara y completa al ""Just-in-Time"" y sigue siendo uno de nuestros ?xitos de mayor venta. El texto esta basado en seminarios dictados por Taichi Ohno, creador del Just-in-Time para entrenar a los suplidores de Toyota. La verdad que descubrio el Sr. Ohno, es que la mejora nunca se detiene - un concepto basado en la tradicion samurai en la cual un guerrero (gerente) nunca deja de perfeccionar su estilo (su habilidad de administrar), y nunca deja de pulir su espada (mejorar el proceso y el producto). Al leer este libro, usted vera claramente la magia del sistema Toyota. Los conceptos aqui expuestos se pueden aplicar a fabricaci?n repetitiva, industrias de procesos, a casi todo tipo de empresa de fabricaci?n, e inclusive a oficinas. (Esta edicion incluye material adicional preparado por Yasuhiro Monden, una autoridad en cuanto al sistema de producci?n de Toyota.)
Download or read book Just in Time for Operators written by Productivity Press Development Team and published by Productivity Press. This book was released on 1998-02-27 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Are you ready to implement a just-in-time (JIT) manufacturing program but need some help orienting employees to the power of JIT? Here is a concise and practical guide to introduce equipment operators, assembly workers, and other frontline employees to the basic concepts, techniques, and benefits of JIT practices. Like all Shop Floor Series books, Just-in-Time for Operators presents concepts and tools in simple and accessible language. The book includes ample illustrations and examples to explain basic JIT concepts and some of the changes people may encounter in a JIT implementation. Key definitions Elimination of process waste Leveled production, kanban, and standard work U-shaped cells and autonomation JIT support techniques The JIT approach is simple and universal -- it works in companies all over the world. Educating employees ensures their full participation and allows them to share their experiences and ideas more effectively.
Download or read book Just in Time Manufacturing written by T.C. Cheng and published by Springer Science & Business Media. This book was released on 1996-07-31 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in clear, straightforward language, Just-in-Time Manufacturing: An introduction discusses in-depth the implementation of JIT manufacturing. The objectives are twofold: firstly, to acquaint the reader with the overall JIT concept and the factors necessary for its implementation, and secondly to reinforce this with an actual case study of JIT implementation in a manufacturing company.
Download or read book Just in Time Scheduling written by Joanna Jozefowska and published by Springer Science & Business Media. This book was released on 2007-08-08 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: As supply chain management has matured, maintaining the precise flow of goods to manage schedules (and minimize inventories) on a just-in-time basis still presents major challenges. This has inspired an array of models and algorithms to help ensure the precise flow of components and final products into inventories to meet just-in-time requirements. This is the first survey of the theoretical work on computer systems models and algorithms utilized in just-in-time scheduling.
Download or read book Putting the Just In Time Philosophy into Practice written by P.J. O'Grady and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes both the essential features of Just-In-Time (JIT) how JIT can be successfully approaches to manufacturing and implemented. JIT marks a significant departure from previous western approaches to manufacturing management, and aims to improve quality levels and customer service while decreasing lead times and inventory levels. The use of simple though effective methods can, with proper management, lead to continual improvements in the manufacturing operation. A number of companies have now implemented JIT and some of these implementations have been very successful. However, what is becoming increasingly clear is that there is a significant number of JIT implementations that fail to achieve the potential benefits of JIT. It is not an easy task, and there are a number of pitfalls that await the unwary manager. My motivation for writing this book has been my experience of working with companies that have been successful in JIT and of seeing what needs to be done and how the implementing most common pitfalls can be avoided. The book is oriented towards batch manufacturing since this accounts for a large proportion of manufacturing in most western countries. Other types (including process, mass and jobbing) can also profitably use many of the JIT techniques to improve their operation.
Download or read book Just in Time Logistics written by Kee-hung Lai and published by CRC Press. This book was released on 2016-04-22 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: The enduring repercussions of the Asian financial crisis in 1997, the worsening global economy following the burst of the dotcom bubbles in 2001, the financial tsunami in 2008, and the incessant rise in customer demand for better services have all contributed to shrinking profit margins for businesses around the world. To cope with these challenges, firms are discovering logistics as a competitive weapon when looking for ways to strengthen and preserve their market positions. One successful solution has been the adoption of Just-in-Time manufacturing systems, which involve many functional areas of a firm such as manufacturing, engineering, marketing, and purchasing, among others. Just-in-Time Logistics extends the JIT concept in manufacturing to business logistics, an area that has been observed to account for more than 30 per cent of sales revenue for some firms. It gives you an overview and an introduction of JIT logistics, and provides managerial insights on how to achieve improved logistics performance in terms of cost and service enhancements. A discussion of the quality, implementation, and performance measurement issues related to the application of JIT in business logistics is also presented.
Download or read book Kanban Just in Time at Toyota written by Japan Management Association and published by CRC Press. This book was released on 1986-04-01 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Toyota's world-renowned success proves that just-in-time (JIT) makes other manufacturing practices obsolete. This simple but powerful book is based on the seminars given by Taiichi Ohno and other senior production staff to introduce Toyota's own supplier companies to JIT. It teaches the philosophy and implementation of what many call the most efficient production system in the world. Provides a clear structure for an introductory JIT training program. Explains every aspect of the JIT system, including how to set it up and how to refine it once it's in place. Shows how to use a simple visual system to control the production process. Every day more American companies are learning that JIT works outside Japan. Now you can get started with this step-by-step book which guides you through the implementation process. Every engineer, manager, supervisor, and worker should read this book to get the clearest, simplest, and most complete introduction to JIT available in English. Results at American companies after reading this book: Lead-time on one product was reduced from 12 weeks to 4 days. Setup time on a large blanking press was reduced from eight hours to one minute and four seconds. Work-in-process has been reduced 50 percent plant-wide. Factory floor space was opened up 30 to 40 percent in every on of their plants.
Download or read book Toyota Production System written by Y. Monden and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Just-in-time (JIT) manufacturing system is an internal system in use by its founder, Toyota Motor Corporation, but it has taken on a new look. Toyota Production System, Second Edition systematically describes the changes that have occurred to the most efficient production system in use today. Since the publication of the first edition of this book in 1983, Toyota has integrated JIT with computer integrated manufacturing technology and a strategic informa tion system. The JIT goal of producing the necessary items in the necessary quantity at the necessary time is an internal driver of production and operations management. The addition of computer integrated technology (including expert systems by artificial intelligence) and information systems technology serve to further reduce costs, increase quality, and improve lead time. The new Toyota production system considers how to adapt production schedules to the demand changes in the marketplace while satisfying the goals of low cost, high quality, and timely delivery. The first edition of this book, Toyota Production System, published in 1983, is the basis for this book. It was translated into many languages including Spanish, Russian, Italian, Japanese, etc., and has played a definite role in inspiring production management systems throughout the world.
Download or read book El Sistema de Produccion Toyota written by Taiichi Ohno and published by Routledge. This book was released on 2018-02-06 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Si usted quiere entender como se origino el sistema de producci?n Toyota y por que tiene exito, debe leer este libro. Aqui encontrara una introducci?n avanzada del justo a tiempo. El mundo le debe mucho a Taiichi Ohno. Nos ha demostrado como fbricar con mayor eficacia, como reducir costos, como producir una mayor calidad, y a examinar atentamente como nosotros, en nuestra calidad de seres humanos, trabajamos en una fbrica. El relato que Ohno cuenta en este libro es brillante. Deberia ser leido por todos los gerentes. No es solo un relato acerca de la fabricaci?n; sino tambien sobre como dirigir exitosamente una empresa.
Download or read book Innovations in Competitive Manufacturing written by Paul M. Swamidass and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovations in Competitive Manufacturing is an examination of manufacturing innovations - both technical and knowledge-based. Over the recent past, technology has created dramatic changes in manufacturing. As a result, the book focuses on the use of technology in gaining competitive advantage in global manufacturing. Forty topics are surveyed in the book, organized into thirteen chapters. Each topic is a carefully written account by one or more leading researchers in that area. This is the first systematic examination of the recent innovations in manufacturing strategy and technology. In addition to providing an understanding of these manufacturing innovations, the book underscores the strategic importance of creating and sustaining the technological resources to ensure a stable manufacturing economic base. The book's purpose is to examine the elements that make today's manufacturers successful. Many examples from industry throughout the book will enable the reader to appreciate and comprehend the concepts presented in the article. In addition to the technical and innovative information, implementation issues concerning new ideas and manufacturing practices are explored within the topical discussions. Four in-depth descriptions of real-life cases provide illustration of key principles. The book has been constructed as a reference tool for manufacturing researchers, students, and practitioners. Hence, after reading the introduction `Innovation in Competitive Manufacturing: From JIT to E-Business', any section or topic in the book can be consulted and/or read in any sequence the reader may choose.
Download or read book JIT Implementation Manual The Complete Guide to Just In Time Manufacturing written by Hiroyuki Hirano and published by CRC Press. This book was released on 2009-04-27 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: "It is a book for manufacturing companies that are fighting desperately for survival and that will go to any length to improve their factories and overcome the obstacles to success. One could even call this book a bible for corporate survival."Hiroyuki Hirano Known as the JIT bible in Japan, JIT Implementation Manual The Complete Guide t