Download or read book Asbestos Essentials written by Hse and published by . This book was released on 2008 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Managing and Working with Asbestos written by and published by . This book was released on 2013 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains the Control of Asbestos Regulations 2012, with the various sections of the Health and Safety Executive's Approved code of practice (ACOP) and associated guidance notes inserted at the relevant points.
Download or read book Introduction to Health and Safety in Construction written by Phil Hughes and published by Routledge. This book was released on 2007 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume fully covers the syllabus for the NEBOSH Certificate in Construction Safety and Health. It has been updated in line with changes in legislation regarding fire safety, noise and vibration, work at height, construction design and control of hazardous substances.
Download or read book Asbestos written by Great Britain, Health and Safety Executive Staff and published by . This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book replaces most earlier HSE guidance on liscensed asbestos removal work. It is aimed at businesses holding a alicence to work with asbestos, either repairing or removing asbestos-containing materials (ACMs), supervising such work, holding an ancillary license or providing training on asbestos. Employers who carry out work with asbestos insulation, aasbestos insulating board using their own employees on their premises, who are exempted from the requirement to hold a licence, also need this guidance. The guidance is split into eight chapters, covering different aspects of licensed work with ACM's. It provides an overview of asbestos and its health effects, the law and how to work safely with asbestos.
Download or read book Guidance for Preventing Asbestos Disease Among Auto Mechanics written by and published by . This book was released on 1987 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Health and Safety at Work written by Allan St John Holt and published by Routledge. This book was released on 2015-06-22 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a reprint of ISBN 978-0-901-35743-4 Widely acknowledged as the one stop summary of health and safety fundamentals, Principles covers law, safety technology, occupational health and hygiene and safety management techniques. Originally written by the late international health and safety expert Allan St John Holt, this new edition has been comprehensively updated by Allan's colleague Jim Allen. The book is designed as a concise, accessible introduction to health and safety basics and includes revision notes and a wide range of references. It is a first class resource for NEBOSH Certificate students.
Download or read book Guidance for Controlling Asbestos Containing Materials in Buildings written by Dale Keyes and published by DIANE Publishing. This book was released on 1998-05 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides guidance on controlling asbestos-containing materials (ACM) found in buildings. Provides a current summary of data on exposure to airborne asbestos; gives survey procedures for determining if ACM is present in buildings; explains how to establish a special operations and maintenance program in a building found to contain asbestos; reviews technical issues confronted when assessing the potential for exposure to airborne asbestos, in particular indoor settings; suggests a structured process for selecting a particular course of action, and much more. Commonly referred to as the Blue Book.
Download or read book Introduction to Health and Safety at Work written by Phil Hughes and published by Routledge. This book was released on 2011-12-31 with total page 1290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn more about health and safety with this NEBOSH-endorsed textbook, written and designed specifically to help you pass your course. Matched to the NEBOSH National General Certificate in Occupational Health and Safety Practice NEBOSH questions and sample answers based on recent examinations at the end of each chapter allow you to test your knowledge and increase your understanding All relevant legislation is summarised for quick reference Introduction to Health and Safety at Work, 5th edition covers the basics of occupational safety and health. The book is the definitive handbook to the National General Certificate in Occupational Health and Safety from NEBOSH with each element of the syllabus explained in detail. To make studying easier, each chapter starts with learning outcomes and ends with questions taken from recent NEBOSH examinations. Specimen answers and a study skills chapter aid exam preparation. It is highly illustrated with over 60 new diagrams and photographs in full colour making learning easy for all. There is a companion website with editable training slides and illustrations to help tutors deliver health and safety courses. This book is a handy reference for managers and directors dealing with the day-to-day issues of health and safety and is also of great value to those studying for level 3 N/SVQ and the IOSH Managing Safely Award. It covers all the essential elements of health and safety management, the legal framework, risk assessment and control standards and includes checklists, report forms and record sheets. In addition, useful topics outside the syllabus have been included and an additional chapter to cover other aspects of health and safety and related topics that many readers will find helpful on completion of the course – construction activities, environmental considerations and international issues New in this edition: Fully restructured in line with new 2010 NEBOSH syllabus Inclusion of a summary of the Report on Health and Safety ‘Common Sense Common Safety’ by Lord Young Gives particular regard to changes in legislation relating to the Site Waste Management Plans Regulations, the Control of Artificial Radiation at Work Regulations, Chemicals (Hazard Information and Packaging for Supply) Regulations (CHIP4) and the European Classification, Packaging and labelling regulations A chapter with guidance on searching the internet with a range of significant Occupational health and Safety Websites. There are dozens of internet references throughout the book Since the Practical Application NGC3 has been significantly revised, Chapter 20 includes a sample practical application based on the new scope and format Phil Hughes MBE, MSc, CFIOSH, is a former Chairman of NEBOSH (1995-2001), former President of IOSH (1990-1991) and runs his own consultancy. He received an MBE for services to health & safety and as a director of RoSPA, in the New Years Honours List 2005. Ed Ferrett PhD, BSc (Hons Eng), CEng, MIMechE, MIET, CMIOSH, is a former Vice Chairman of NEBOSH (1999-2008) and a lecturer on NEBOSH courses at Cornwall Business School of Cornwall College. He is a Chartered Engineer and a health and safety consultant.
Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field
Download or read book Health Safety and Environment Legislation written by Edward Rowland and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: The laws relating to the environment and health and safety have become so closely interrelated that the previous edition of the Pocket Guide to Environmental Law has been completely revised, updated and enlarged to include Health and Safety Law. The resulting Health, Safety and Environment Legislation: A Pocket Guide is divided into 17 sections, each of which is subdivided, with the relevant legislation easily identified within the sections. A list of contents and an index are also included. All material is current as of November 2002, and includes recently introduced legislation such as CHIP 3, GMOs (Deliberate Release), Control of Asbestos at Work, COSHH and Control of Lead at Work. This guide will be useful to all employers and employees, but especially so to those employed to advise their colleagues on health, safety and environmental law. It is therefore designed to be a first port-of-call for quick and easy access to reference information, which can readily be carried to meetings or taken out on site.
Download or read book Tolley s Practical Risk Assessment Handbook written by Mike Bateman and published by Routledge. This book was released on 2006-08-14 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk assessment has become the backbone of health and safety management in the UK and elsewhere. Employers have a legal duty to prove that risk assessments have been carried out and to ensure that appropriate precautions have been implemented. Mike Bateman demystifies the risk assessment process and how it relates to UK legislation. He covers both the general techniques and the assessment of specific risks, such as hazardous substances (COSHH), noise, manual handling, Display Screen Equipment (DSE) workstations, Personal Protective Equipment (PPE), fire, asbestos and work at height. The book is practical in its approach to risk assessment rather than being overly legalistic or academic and tells the reader how to go about risk assessment, not just what the legislation requires. It contains numerous checklists, forms and worked examples for a variety of hazards and industries. This edition has been fully updated to take into account the impact of the following requirements on risk assessments: Work at Height Regulations 2005 – full new chapter Control of Noise at Work Regulations 2005 Regulatory Reform (Fire Safety) Order (RRFSO) 2006 Mike Bateman runs his own health and safety consultancy and specialises in risk assessments. He is a corporate member of IOSH and a registered health and safety practitioner.
Download or read book Introduction to Health and Safety at Work written by and published by Routledge. This book was released on with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Health and Safety Pocket Book written by Jeremy Stranks and published by Routledge. This book was released on 2007-03-14 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Health and Safety Pocket Book is a handy reference tool for practising health and safety professionals, auditors, managers, HR personnel, employee representatives and anyone with health and safety responsibilities. It is an essential compilation of guidance, data and checklists covering a wide range of health and safety topics, supported by extensive key glossary terms. The A-Z arrangement within the chapters and extensive cross-referencing make the book easy to navigate, while its size and scope make it the ideal volume for ready reference and site visits. The book will also be useful for health and safety courses at all levels. Key features include: The principal health and safety legal requirements for every industry Safety management elements and systems Checklists for major hazards affecting all industries A wealth of charts, hard to remember details and data A glossary of the main concepts of health and safety A list of important health and safety courses, publications and organisations Jeremy Stranks has over 40 years' experience in occupational safety and health enforcement, management consultancy and training. He is a founding member of NEBOSH and has lectured on all aspects of health and safety. His company Safety & Hygiene Consultants offers organisations advice in the preparation of Statements of Health and Safety Policy, risk assessment and safety monitoring procedures, together with in-house training for all levels of management. He also undertakes expert witness work in both criminal and civil cases.
Download or read book Hazardous Chemicals Handbook written by P A CARSON and published by Elsevier. This book was released on 2013-10-22 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes core information for quick reference in the workplace, using tables and checklists wherever possible. Essential reading for safety officers, company managers, engineers, transport personnel, waste disposal personnel, environmental health officers, trainees on industrial training courses and engineering students. This book provides concise and clear explanation and look-up data on properties, exposure limits, flashpoints, monitoring techniques, personal protection and a host of other parameters and requirements relating to compliance with designated safe practice, control of hazards to people's health and limitation of impact on the environment. The book caters for the multitude of companies, officials and public and private employees who must comply with the regulations governing the use, storage, handling, transport and disposal of hazardous substances. Reference is made throughout to source documents and standards, and a Bibliography provides guidance to sources of wider ranging and more specialized information. Dr Phillip Carson is Safety Liaison and QA Manager at the Unilever Research Laboratory at Port Sunlight. He is a member of the Institution of Occupational Safety and Health, of the Institution of Chemical Engineers' Loss Prevention Panel and of the Chemical Industries Association's `Exposure Limits Task Force' and `Health Advisory Group'. Dr Clive Mumford is a Senior Lecturer in Chemical Engineering at the University of Aston and a consultant. He lectures on several courses of the Certificate and Diploma of the National Examining Board in Occupational Safety and Health. [Given 5 star rating] - Occupational Safety & Health, July 1994 - Loss Prevention Bulletin, April 1994 - Journal of Hazardous Materials, November 1994 - Process Safety & Environmental Prot., November 1994
Download or read book Refurbishing Occupied Buildings written by Bev Nutt and published by Thomas Telford. This book was released on 1998 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based around the CDM regulations, this guide draws information from Health and Safety Executive data, to develop a profile of construction activities, enabling readers to identify and prioritise health and safety risks during the refurbishment of occupied buildings.
Download or read book Oxford Handbook of Occupational Health written by Julia Smedley and published by Oxford University Press, USA. This book was released on 2013-03-28 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: Resource added for the Human Resources program 101161.
