Download or read book Woods Practical Guide to Noise Control written by Ian Sharland and published by . This book was released on 2001 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quieting A Practical Guide to Noise Control written by Raymond D. Berendt and published by The Minerva Group, Inc.. This book was released on 2000-09 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide offers practical solutions for ordinary noise problems that a person is likely to meet. The book describes the ways in which sounds are generated, travel to the listener, and affect his hearing and well-being. Recommendations are given for controlling noise at the source and along its path of travel, and for protecting the listener. This guide instructs the reader by way of "Warning Sings" on how to determine whether he is being subjected in his environment to prolonged noise exposures that may prove hazardous to his hearing.Remedies are given for noise problems that a person is likely to find in his home, at work and at school, while traveling, and in the growth and development of his community. The remedies include noise prevention techniques and selection of quiet alternatives to existing noise sources. General principles for selecting quiet appliances are given. Ways of searching for the sources of noise and for determining the paths over which they travel to the listener are described. A detailed index is given for individual ways of looking for inherently quiet homes and travel accomodations are described.In a final chapter, there are suggestions for enlisting community help where large external sources of noise must be quieted, such as those arisseing from public utilities and public transportation.
Download or read book Woods Practical Guide to Noise Control written by Ian J. Sharland and published by . This book was released on 1973 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Acoustics and Noise Control written by R J Peters and published by Routledge. This book was released on 2013-11-12 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustics and Noise Control provides a detailed and comprehensive introduction to the principles and practice of acoustics and noise control. Since the last edition was published in 1996 there have been many changes and additions to standards, laws and regulations, codes of practice relating to noise, and in noise measurement techniques and noise control technology so this new edition has been fully revised and updated throughout. The book assumes no previous knowledge of the subject and requires only a basic knowledge of mathematics and physics. There are worked examples in the text to aid understanding and a range of experiments help students use complicated apparatus. Thoroughly revised to cover the latest changes in standards, codes of practice and legislation, this new edition covers much of the Institute of Acoustics Diploma syllabus and has an increased emphasis on the legal issues relating to noise control.
Download or read book Metric Handbook written by Pamela Buxton and published by Routledge. This book was released on 2015-03-05 with total page 1585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significantly updated in reference to the latest construction standards and evolving building types Many chapters revised including housing, transport, offices, libraries and hotels New chapter on flood-aware design Sustainable design integrated into chapters throughout Over 100,000 copies sold to successive generations of architects and designers - this book belongs in every design studio and architecture school library The Metric Handbook is the major handbook of planning and design information for architects and architecture students. Covering basic design data for all the major building types, it is the ideal starting point for any project. For each building type, the book gives the basic design requirements and all the principal dimensional data, and succinct guidance on how to use the information and what regulations the designer needs to be aware of. As well as building types, the Metric Handbook deals with broader aspects of design such as materials, acoustics and lighting, and general design data on human dimensions and space requirements. The Metric Handbook provides an invaluable resource for solving everyday design and planning problems.
Download or read book Handbook of Noise and Vibration Control written by Malcolm J. Crocker and published by John Wiley & Sons. This book was released on 2007-10-05 with total page 1594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two of the most acclaimed reference works in the area of acoustics in recent years have been our Encyclopedia of Acoustics, 4 Volume set and the Handbook of Acoustics spin-off. These works, edited by Malcolm Crocker, positioned Wiley as a major player in the acoustics reference market. With our recently published revision of Beranek & Ver's Noise and Vibration Control Engineering, Wiley is a highly respected name in the acoustics business. Crocker's new handbook covers an area of great importance to engineers and designers. Noise and vibration control is one largest areas of application of the acoustics topics covered in the successful encyclopedia and handbook. It is also an area that has been under-published in recent years. Crocker has positioned this reference to cover the gamut of topics while focusing more on the applications to industrial needs. In this way the book will become the best single source of need-to-know information for the professional markets.
Download or read book Woods Practical Guide to Noise Control written by Ian Sharland and published by . This book was released on 1972 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Noise in the Plastics Processing Industry written by Robert Peters and published by CRC Press. This book was released on 2018-09-06 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide for managers and engineers in the plastics industry shows how to reduce high noise levels which often occur in the workplace and reduce the risk of noise-induced hearing damage to employees. Practical methods for reducing noise from industrial machinery are described and illustrated with about twenty-five case studies relating to plastics processing machines such as granulators, shredders, extruders and injection moulders. Noise-control techniques include standard noise-control measures: enclosures, silencers and the use of sound insulating, sound-absorbing materials, vibration isolation and damping; and now the use of active noise control methods. Along with fresh case studies this new edition adds chapters on environmental noise, on European Union machinery noise emission regulations, hearing protection, prediction of noise levels, and the design of quieter workplaces.
Download or read book Handbook of Acoustics written by Malcolm J. Crocker and published by John Wiley & Sons. This book was released on 1998-03-09 with total page 1494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustical engineers, researchers, architects, and designers need a comprehensive, single-volume reference that provides quick and convenient access to important information, answers and questions on a broad spectrum of topics, and helps solve the toughest problems in acoustical design and engineering. The Handbook of Acoustics meets that need. It offers concise coverage of the science and engineering of acoustics and vibration. In more than 100 clearly written chapters, experts from around the world share their knowledge and expertise in topics ranging from basic aerodynamics and jet noise to acoustical signal processing, and from the interaction of fluid motion and sound to infrasound, ultrasonics, and quantum acoustics. Topics covered include: * General linear acoustics * Nonlinear acoustics and cavitation * Aeroacoustics and atmospheric sound * Mechanical vibrations and shock * Statistical methods in acoustics * Architectural acoustics * Physiological acoustics * Underwater sound * Ultrasonics, quantum acoustics, and physical aspects of sound * Noise: its effects and control * Acoustical signal processing * Psychological acoustics * Speech communication * Music and musical acoustics * Acoustical measurements and instrumentation * Transducers The Handbook of Acoustics belongs on the reference shelf of every engineer, architect, research scientist, or designer with a professional interest in the propagation, control, transmission, and effects of sound.
Download or read book Detailing for Acoustics written by Peter Lord and published by Elsevier. This book was released on 2014-05-12 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detailing for Acoustics, Second Edition focuses on the techniques, principles, and approaches involved in acoustics. The publication first elaborates on objectives and details. Topics cover sources, format, content, roofs, ceilings, partitions, walls, floors, doors, windows, linings, and services. Sketches that represent the standard details of roofs, partitions, walls, and floors, sound absorption and standard details of ceilings, machinery enclosures, noise barriers, and standard details and sound absorption of timber floors and concrete floors are presented. The manuscript examines sound absorption and insulation and external noise. Drawings that show the acoustic capabilities of different walls or ceiling finishes and the effect of enclosure on sound absorption are presented. The publication is a useful reference for architects and design engineers wanting to pursue further studies in acoustics.
Download or read book Noise in the Plastics Processing Industry written by Bob Peters and published by Smithers Rapra. This book was released on 2017-11-10 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an updated and revised version of a book published by RAPRA in 1985 'Noise in the Plastics Processing Industry'. The original version provided guidance to managers and engineers in the plastics industry on ways to reduce high noise levels in the workplace, in order to reduce risk of noise induced hearing damage to employees. Practical methods for reducing noise from industrial machinery in general were described and then illustrated with 25 case studies all relating to plastics processing machines such a granulators, shredders, extruders and injection moulders.Noise control techniques described include standard noise control measures such as enclosures, silencers and the use of sound insulating, sound absorbing materials, use of vibration isolation and damping. Most of these techniques have not changed since 1985, however one new technique is now available - the use of active noise control methods. The scope of the revised text has been extended to include chapters on environmental noise, European Union machinery noise emission regulations, hearing protection and prediction of noise levels, and the design of quieter workplaces.A new chapter of case studies has been added which reviews many already published case studies and introduces some new ones.
Download or read book Metric Handbook written by David Littlefield and published by Routledge. This book was released on 2012-09-10 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Fully updated in reference to the latest construction standards and new building types • Sustainable design fully integrated into each chapter • Over 100,000 copies sold to successive generations of architects and designers – this book truly belongs on every design office desk and drawing board. The Metric Handbook is the major handbook of planning and design data for architects and architecture students. Covering basic design data for all the major building types it is the ideal starting point for any project. For each building type, the book gives the basic design requirements and all the principal dimensional data, and succinct guidance on how to use the information and what regulations the designer needs to be aware of. As well as buildings the Metric Handbook deals with broader aspects of design such as materials, acoustics and lighting, and general design data on human dimensions and space requirements. The Metric Handbook really is the unique reference for solving everyday planning problems. About the Author: David Littlefield is a senior lecturer at the University of the West of England, where he teaches in the department of planning and architecture. For many years he worked as a writer and journalist. David has written, co-written or edited over ten books on architecture. Customer reviews: “This book is a great investment as you will use it throughout your career as an architect.” “I have found that this book is the Bible for all planners, contains so much information that no designer or planner should be without a copy.” “An essential reference book that should be on the shelf in any design studio.”
Download or read book Principles of Occupational Health and Hygiene written by Sue Reed and published by Routledge. This book was released on 2020-07-27 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Occupational Health and Hygiene offers a comprehensive overview of occupational health risks and hazardous environments encountered in a range of industries and organisational settings. Leading industry professionals and educators explain how to identify key workplace hazards including chemical agents such as dusts, metals and gases; physical agents such as noise, radiation and extremes of heat and cold; and microbiological agents. They outline assessment procedures and processes for identifying exposure levels. They also explain how to evaluate risk and follow safety guidelines to control and manage these hazards effectively. Chapters are heavily illustrated with detailed case studies, diagrams, flowcharts and photos. Practical guidelines are provided for managing each hazard type. This third edition has been extensively revised and updated and reflects current research evidence and the Workplace Health and Safety legislation on workplace hazards. Principles of Occupational Health and Hygiene is an essential reference for Occupational Hygienists and anyone in an Occupational Health and Safety role.
Download or read book Architectural Acoustics written by Ana M Jaramillo and published by Routledge. This book was released on 2014-10-24 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of good acoustic design can seem daunting to designers when trying to understand the often-complex physics of sound control. The ever-increasing number of standards and performance criteria that can be requested on new developments further complicates acoustics for architects. Architectural Acoustics, part of the PocketArchitecture series, provides the fundamental theory and understanding of acoustics and applications of effective detailing for specific building types and conditions in an accessible and clear technical guide. The book provides: a compact and understandable introduction to the fundamentals of building and architectural acoustics definitions of suitable acoustic performance criteria for a wide range of common buildings and room types guidance on specification and detailing of the most suitable construction types in North America and the UK. This book is both, a handy rule of thumb on acoustics for anyone involved in the design or construction of buildings, as well as an essential addition to any architect’s reference library.
Download or read book Chemical Engineering Design written by Ray Sinnott and published by Elsevier. This book was released on 2014-06-28 with total page 979 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 2nd Edition of Coulson & Richardson's classic Chemical Engineering text provides a complete update and revision of Volume 6: An Introduction to Design. It provides a revised and updated introduction to the methodology and procedures for process design and process equipment selection and design for the chemical process and allied industries. It includes material on flow sheeting, piping and instrumentation, mechanical design of equipment, costing and project evaluation, safety and loss prevention. The material on safety and loss prevention and environmental protection has been revised to cover current procedures and legislation. Process integration and the use of heat pumps has been included in the chapter on energy utilisation. Additional material has been added on heat transfer equipment; agitated vessels are now covered and the discussion of fired heaters and plate heat exchangers extended. The appendices have been extended to include a computer program for energy balances, illustrations of equipment specification sheets and heat exchanger tube layout diagrams.This 2nd Edition will continue to provide undergraduate students of chemical engineering, chemical engineers in industry and chemists and mechanical engineers, who have to tackle problems arising in the process industries, with a valuable text on how a complete process is designed and how it must be fitted into the environment.
Download or read book Faber Kell s Heating and Air Conditioning of Buildings written by Doug Oughton and published by Routledge. This book was released on 2014-11-27 with total page 1687 pages. Available in PDF, EPUB and Kindle. Book excerpt: For over 70 years, Faber & Kell's has been the definitive reference text in its field. It provides an understanding of the principles of heating and air-conditioning of buildings in a concise manner, illustrating practical information with simple, easy-to-use diagrams, now in full-colour. This new-look 11th edition has been re-organised for ease of use and includes fully updated chapters on sustainability and renewable energy sources, as well as information on the new Building Regulations Parts F and L. As well as extensive updates to regulations and codes, it now includes an introduction that explains the role of the building services engineer in the construction process. Its coverage of design calculations, advice on using the latest technologies, building management systems, operation and maintenance makes this an essential reference for all building services professionals.
