Download or read book Lignocellulosic Fibers and Wood Handbook written by Mohamed Naceur Belgacem and published by John Wiley & Sons. This book was released on 2016-04-05 with total page 1289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will focus on lignocellulosic fibres as a raw material for several applications. It will start with wood chemistry and morphology. Then, some fibre isolation processes will be given, before moving to composites, panel and paper manufacturing, characterization and aging.
Download or read book Introduction to Wood and Natural Fiber Composites written by Douglas D. Stokke and published by John Wiley & Sons. This book was released on 2013-12-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades, there has been a shift in research and industrial practice, and products traditionally manufactured primarily from wood are increasingly combined with other nonwood materials of either natural or synthetic origin. Wood and other plant-based fiber is routinely combined with adhesives, polymers, and other "ingredients" to produce composite materials. Introduction to Wood and Natural Fiber Composites draws together widely scattered information concerning fundamental concepts and technical applications, essential to the manufacture of wood and natural fiber composites. The topics addressed include basic information on the chemical and physical composition of wood and other lignocellulosic materials, the behavior of these materials under thermocompression processes, fundamentals of adhesion, specific adhesive systems used to manufacture composite materials, and an overview of the industrial technologies used to manufacture major product categories. The book concludes with a chapter on the burgeoning field of natural fiber-plastic composites. Introduction to Wood and Natural Fiber Composites is a valuable resource for upper-level undergraduate students and graduate students studying forest products and wood science, as well as for practicing professionals working in operational areas of wood- and natural-fiber processing. For more information on the Wiley Series in Renewable Resources, visit www.wiley.com/go/rrs Topics covered include: Overview of lignocellulosic material, their chemical and physical composition Consolidation behavior of wood and fiber in response to heat and pressure Fundamentals of adhesion Adhesives used to bond wood and lignocellulosic composites Manufacturing technology of major product types Fiber/plastic composites
Download or read book Wood and Fiber Science written by and published by . This book was released on 2000 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Practical Identification of Wood Pulp Fibers written by Russell A. Parham and published by Tappi Press. This book was released on 1982-01-01 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fiber Atlas written by Marja-Sisko Ilvessalo-Pfäffli and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This richly-illustrated book presents the information necessary for fiber analysis in the field of pulp and paper. A discussion of raw-material structure and the features used for species identification in pulp is followed up by the description of 117 fiber species. Of these, 83 are wood fibers and 34 are of nonwood origin. The tree species range across all five continents, 29 from Eurasia, 38 from North America and 16 from the southern hemisphere and the tropics. Informative micrographs, identification tables, and distribution maps aid species differentiation, making this atlas ideal for everyone interested in fiber identification.
Download or read book Introduction to Wood and Natural Fiber Composites written by Douglas D. Stokke and published by John Wiley & Sons. This book was released on 2013-10-21 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades, there has been a shift in research and industrial practice, and products traditionally manufactured primarily from wood are increasingly combined with other nonwood materials of either natural or synthetic origin. Wood and other plant-based fiber is routinely combined with adhesives, polymers, and other "ingredients" to produce composite materials. Introduction to Wood and Natural Fiber Composites draws together widely scattered information concerning fundamental concepts and technical applications, essential to the manufacture of wood and natural fiber composites. The topics addressed include basic information on the chemical and physical composition of wood and other lignocellulosic materials, the behavior of these materials under thermocompression processes, fundamentals of adhesion, specific adhesive systems used to manufacture composite materials, and an overview of the industrial technologies used to manufacture major product categories. The book concludes with a chapter on the burgeoning field of natural fiber-plastic composites. Introduction to Wood and Natural Fiber Composites is a valuable resource for upper-level undergraduate students and graduate students studying forest products and wood science, as well as for practicing professionals working in operational areas of wood- and natural-fiber processing. For more information on the Wiley Series in Renewable Resources, visit www.wiley.com/go/rrs Topics covered include: Overview of lignocellulosic material, their chemical and physical composition Consolidation behavior of wood and fiber in response to heat and pressure Fundamentals of adhesion Adhesives used to bond wood and lignocellulosic composites Manufacturing technology of major product types Fiber/plastic composites
Download or read book Natural Fibre Composites written by Alma THULE and published by Woodhead Publishing. This book was released on 2014-02-13 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of natural fibres as reinforcements in composites has grown in importance in recent years. Natural Fibre Composites summarises the wealth of significant recent research in this area. Chapters in part one introduce and explore the structure, properties, processing, and applications of natural fibre reinforcements, including those made from wood and cellulosic fibres. Part two describes and illustrates the processing of natural fibre composites. Chapters discuss ethical practices in the processing of green composites, manufacturing methods and compression and injection molding techniques for natural fibre composites, and thermoset matrix natural fibre-reinforced composites. Part three highlights and interprets the testing and properties of natural fibre composites including, non-destructive and high strain rate testing. The performance of natural fibre composites is examined under dynamic loading, the response of natural fibre composites to impact damage is appraised, and the response of natural fibre composites in a marine environment is assessed. Natural Fibre Composites is a technical guide for professionals requiring an understanding of natural fibre composite materials. It offers reviews, applications and evaluations of the subject for researchers and engineers. Introduces and explores the structure, properties, processing, and applications of natural fibre reinforcements, including those made from wood and cellulosic fibres Highlights and interprets the testing and properties of natural fibre composites, including non-destructive and high strain rate testing Examines performance of natural fibre composites under dynamic loading, the response of natural fibre composites to impact damage, and the response of natural fibre composites in a marine environment
Download or read book Wood Structure and Composition written by Menachem Lewin and published by CRC Press. This book was released on 1991-08-14 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressed to the general professional chemist at a level between the undergraduate and the specialist in the field, presents such aspects of modern wood chemistry as anatomy, analysis, the composite nature and chemical composition of wood, and the structure and properties of cellulose, lignin, hemic
Download or read book Advanced High Strength Natural Fibre Composites in Construction written by Mizi Fan and published by Woodhead Publishing. This book was released on 2016-10-04 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced High Strength Natural Fibre Composites in Construction provides the basic framework and knowledge required for the efficient and sustainable use of natural fiber composites as a structural and building material, along with information on the ongoing efforts to improve the efficiency of use and competitiveness of these composites. Areas of particular interest include understanding the nature and behavior of raw materials and their functional contributions to the advanced architectures of high strength composites (Part 1), discussing both traditional and novel manufacturing technologies for various advanced natural fiber construction materials (Part 2), examining the parameters and performance of the composites (Part 3), and finally commenting on the associated codes, standards, and sustainable development of advanced high strength natural fiber composites for construction. This exposition will be based on well understood environmental science as it applies to construction (Part 4). The book is aimed at academics, research scholars, and engineers, and will serve as a most valuable text or reference book that challenges undergraduate and postgraduate students to think beyond standard practices when designing and creating novel construction materials. Presents the first comprehensive review on the efficient and sustainable use of natural fiber composites in construction and building materials Contains detailed information on the structure, chemical composition, and physical and mechanical properties of natural fibers Covers both traditional and novel manufacturing technologies for high strength natural fiber composites Includes material parameters and performance in use, as well as associated codes, standards, and applied case studies Presents contributions from leading international experts in the field
Download or read book Stabilized Engineered Wood Fiber for Accessible Trails written by Theodore Laufenberg and published by . This book was released on 2004 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Morphology of Wood Pulp Fiber from Softwoods and Influence on Paper Strength written by Richard A. Horn and published by . This book was released on 1974 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: To achieve full utilization of each harvested tree, interest centers on use of all of the tree components. The objective of the study is to determine the influence of the morphological characteristics of pulp fiber from 12 western U.S. softwood species, representative of a wide range of fiber. The effect of the morphology of the wood pulp fiber as distinguished from that of the wood fiber is emphasized because differences in performance of fiber-based products are traced to the pulp fiber. Interrelationships of fiber morphology and pulp sheet properties are discussed. The results indicate that it is not possible to fully characterize the performance of a pulp by a single morphological characteristic and that the morphological characteristics significantly influence strength properties of sheets.
Download or read book Eco Friendly Adhesives for Wood and Natural Fiber Composites written by Mohammad Jawaid and published by Springer Nature. This book was released on 2021-01-21 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of eco-friendly resins and their composite materials covering their synthesis, sources, structures and properties for different industrial applications to support the ongoing research and development in eco-friendly and renewable commercial products. It provides comparative discussions on the properties of eco-friendly resins with other polymer composites. It is a useful reference on bio-based eco-friendly polymer resins, wood-based composites, natural fibers and biomass materials for the polymer scientists, engineers and material scientists.
Download or read book Wood Fiber polymer Composites written by Michael P. Wolcott and published by . This book was released on 1993 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elements of Wood Fiber Structure and Fiber Bonding written by F. A. Simmonds and published by . This book was released on 1963 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Identifying Aboveground Wood Fiber Potentials in New York State written by Eric H. Wharton and published by . This book was released on 1984 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory and Design of Wood and Fiber Composite Materials written by Benjamin A. Jayne and published by Syracuse University Press. This book was released on 1972-08-01 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Download or read book Touching Light written by Ronelle Wood and published by Createspace Independent Publishing Platform. This book was released on 2015-09-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: You have inside you a cloak of gossamer connective tissue that surrounds and supports everything and functions like fiber optics. This tissue is called fascia. In these pages, myofascial release expert Ronelle Wood translates the scientific language for the chemistry, function, and physiology of fascia, shares her hands-on expertise, and explains in layman's terms how our fascia affects us all in everyday life and its potential as a prime source of health and rejuvenation. Gay Hendricks says in his foreword: "I've been blessed to know many great healers and teachers over my forty-five years in the field of transformation; Ronelle is right at the top of the list of masterful practitioners I've known." Read this book and you'll no longer perceive your body as a misbehaving slave to be punished into submission, but as a communicative partner-always supporting you.
