Download or read book Wireline Formation Testing written by Fikri J Kuchuk and published by . This book was released on 2021-03-13 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireline Formation Testing provides a comprehensive exploration of this modeling through use of hardware, advanced formation testing modules, and new interpretation techniques. Exposition of these analytical models, systematic inclusion of mixed boundary value problems, first-principle-based pressure gradient interpretation, probabilistic enumeration of radius of investigation, and system identification methods appeal to various levels of engineering expertise. This book provides a resource to experienced engineers who wish to evaluate reservoirs simultaneously with the scope of the testing results, as well as to universities that wish to provide students with this understanding through undergraduate and applied graduate courses.
Download or read book Wireline Formation Testing and Sampling written by Schlumberger Limited and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wireline Formation Testing Well Deliverability written by George Stewart and published by . This book was released on 2012 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Formation Testing written by Wilson C. Chin and published by John Wiley & Sons. This book was released on 2015-11-10 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditional well logging methods, such as resistivity, acoustic, nuclear and NMR, provide indirect information related to fluid and formation properties. The “formation tester,” offered in wireline and MWD/LWD operations, is different. It collects actual downhole fluid samples for surface analysis, and through pressure transient analysis, provides direct measurements for pore pressure, mobility, permeability and anisotropy. These are vital to real-time drilling safety, geosteering, hydraulic fracturing and economic analysis. Methods for formation testing analysis, while commercially important and accounting for a substantial part of service company profits, however, are shrouded in secrecy. Unfortunately, many are poorly constructed, and because details are not available, industry researchers are not able to improve upon them. This new book explains conventional models and develops new powerful algorithms for “double-drawdown” and “advanced phase delay” early-time analysis - importantly, it is now possible to predict both horizontal and vertical permeabilities, plus pore pressure, within seconds of well logging in very low mobility reservoirs. Other subjects including inertial Forchheimer effects in contamination modeling and time-dependent flowline volumes are also developed. All of the methods are explained in complete detail. Equations are offered for users to incorporate in their own models, but convenient, easy-to-use software is available for those needing immediate answers. The leading author is a well known petrophysicist, with hands-on experience at Schlumberger, Halliburton, BP Exploration and other companies. His work is used commercially at major oil service companies, and important extensions to his formation testing models have been supported by prestigious grants from the United States Department of Energy. His new collaboration with China National Offshore Oil Corporation marks an important turning point, where advanced simulation models and hardware are evolving side-by-side to define a new generation of formation testing logging instruments. The present book provides more than formulations and solutions: it offers a close look at formation tester development “behind the scenes,” as the China National Offshore Oil Corporation opens up its research, engineering and manufacturing facilities through a collection of interesting photographs to show how formation testing tools are developed from start to finish.
Download or read book The Essentials of Wireline Formation Tester written by Schlumberger Limited and published by . This book was released on 1973 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analytical Studies of Wireline Formation Testing and Pressure Losses Across Gravel Packs written by Turhan Yildiz and published by . This book was released on 1989 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Formation Testing written by Wilson C. Chin and published by John Wiley & Sons. This book was released on 2014-02-14 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book available for the reservoir or petroleum engineer covering formation testing—with algorithms for wireline and LWD reservoir analysis developed for transient pressure, contamination modeling, permeability, and pore pressure prediction. Traditional well logging methods, such as resistivity, acoustic, nuclear, and NMR, provide indirect information relating to fluid and formation properties. However, the "formation tester" offered in wireline and MWD/LWD operations is different. It collects actual downhole fluid samples for surface analysis, and through pressure transient analysis, provides direct measurements for pore pressure, mobility, permeability, and anisotropy. These are vital to real-time drilling safety, geosteering, hydraulic fracturing, and economic analysis. Methods for formation testing analysis, while commercially important and accounting for a substantial part of service company profits, are shrouded in secrecy. Many are poorly constructed, and because details are not available, industry researchers are not able to improve on them. Formation Testing explains conventional models and develops new, more powerful algorithms for early-time analysis. More importantly, it addresses a critical area in sampling related to "time required to pump clean samples," using rigorous multiphase flow techniques. All of the methods are explained in complete detail. Equations are offered for users to incorporate in their own models, but, for those needing immediate answers, convenient, easy-to-use software is available. The lead author is a well-known petrophysicist with hands-on experience at Schlumberger, Halliburton, BP Exploration, and other companies. His work is used commercially at major oil service companies, and important extensions to his formation testing models have been supported by prestigious grants from the U.S. Department of Energy. His latest collaboration with China National Offshore Oil Corporation marks an important turning point, where advanced simulation models and hardware are evolving side-by-side, defining a new generation of formation testing logging instruments. Providing more than formulations and solutions, this book offers a close look at "behind the scenes" formation tester development, as the China National Offshore Oil Corporation opens up its research, engineering, and manufacturing facilities through a collection of never-before-seen photographs, showing how formation testing tools are developed from start to finish.
Download or read book Well Logging and Formation Evaluation written by Toby Darling and published by Elsevier. This book was released on 2005-05-26 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: This hand guide in the Gulf Drilling Guides series offers practical techniques that are valuable to petrophysicists and engineers in their day-to-day jobs. Based on the author’s many years of experience working in oil companies around the world, this guide is a comprehensive collection of techniques and rules of thumb that work.The primary functions of the drilling or petroleum engineer are to ensure that the right operational decisions are made during the course of drilling and testing a well, from data gathering, completion and testing, and thereafter to provide the necessary parameters to enable an accurate static and dynamic model of the reservoir to be constructed. This guide supplies these, and many other, answers to their everyday problems. There are chapters on NMR logging, core analysis, sampling, and interpretation of the data to give the engineer a full picture of the formation. There is no other single guide like this, covering all aspects of well logging and formation evaluation, completely updated with the latest techniques and applications. · A valuable reference dedicated solely to well logging and formation evaluation.· Comprehensive coverage of the latest technologies and practices, including, troubleshooting for stuck pipe, operational decisions, and logging contracts.· Packed with money-saving and time saving strategies for the engineer working in the field.
Download or read book Wireline Formation Testing Well Deliverability written by George Stewart and published by Pennwell Books. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern reservoir engineering must accommodate for a complex set of heterogeneous phases contained in the well and petroleum reservoir. Achieving the optimal solution to reservoir problems involves employing sophisticated simulation techniques, executing complex well-completion actions and following up with constant attention to the changes within a reservoir. Renowned petroleum engineer George Stewart offers in-depth information in his latest book, Wireline Formation Testing and Well Deliverability. A companion to his recent book, Well Test Design & Analysis, this newest technical volume covers the widest range of possible issues for reservoir engineering. Stewart's exhaustive explanations include the nuances of radial flow theory, examples of when to run production logs, and to well testing for drawdown in a commingled reservoir. The volume includes a CD containing chapters 13-17.
Download or read book A Study of Formation Permeability Determined by Wireline Formation Test Tools written by John Clark McMenemy and published by . This book was released on 1992 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wireline and While drilling Formation tester Sampling with Oval Focused and Conventional Probe Types in the Presence of Water and Oil base Mud filtrate Invasion in Deviated Wells written by Abdolhamid Hadibeik Nishaboori and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Speculation about the potential of developing new fluid sampling methods with probe-type formation testers has existed since the introduction of formation pressure testing to the drilling environment in 2002. Extending the existing wireline technology requires a new pumping system capable of removing invasion fluids and then filling single-phase sample chambers. Several technological advances are necessary before these conditions are commercially possible. Although wireline pumpout tools may require hours to retrieve representative fluid samples, spending hours obtaining samples in the drilling environment may not be considered a practical alternative. The objective of this thesis is to quantify the viability of sampling in the drilling environment by way of numerical simulations. The study considers the dynamic nature of invasion while drilling when using both new and conventional probe configurations to retrieve fluid samples. Previous studies assumed a time-constant rate of invasion that was close to that of the final stages of invasion. Furthermore, most simulations of wireline formation-tester measurements assumed that invasion ended at the time when fluid pumpout began. Both of these assumptions are optimistic for a drilling tool. To realistically simulate invasion during drilling, a mudcake model is used that continues to grow in thickness and sealing effectiveness during invasion and throughout the sampling process. Simulation results focus on scenarios in which water-base mud (WBM) and oil-base mud (OBM) invade an oil-bearing zone. In addition, the accuracy of functions used to estimate contamination is studied in an OBM environment. The base model consists of a typical probe-type tool in a vertical well wherein fluid samples are retrieved using a time-constant flow rate. Invasion time is varied from 1 hour to 48 hours to compare drilling and wireline sampling tools. We quantify mudcake sealing effectiveness, as well as the effect of borehole deviation. Oval (elongated) and focusing guard-style probes are compared to standard probe configurations for various petrophysical rock types. Simulations of fluid cleanup times for a variety of rock types and wellbore deviation angles indicate that the oval focused probe retrieves the cleanest fluid sample in the shortest period of time.
Download or read book Integration of Numerical Simulation and Wireline Formation Testing Measurements for Permeability Interpretation written by Min Yang and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Formation Testing written by Wilson Chin and published by Wiley-Scrivener. This book was released on 2014-03-17 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book available for the reservoir or petroleum engineer covering formation testing—with algorithms for wireline and LWD reservoir analysis developed for transient pressure, contamination modeling, permeability, and pore pressure prediction. Traditional well logging methods, such as resistivity, acoustic, nuclear, and NMR, provide indirect information relating to fluid and formation properties. However, the "formation tester" offered in wireline and MWD/LWD operations is different. It collects actual downhole fluid samples for surface analysis, and through pressure transient analysis, provides direct measurements for pore pressure, mobility, permeability, and anisotropy. These are vital to real-time drilling safety, geosteering, hydraulic fracturing, and economic analysis. Methods for formation testing analysis, while commercially important and accounting for a substantial part of service company profits, are shrouded in secrecy. Many are poorly constructed, and because details are not available, industry researchers are not able to improve on them. Formation Testing explains conventional models and develops new, more powerful algorithms for early-time analysis. More importantly, it addresses a critical area in sampling related to "time required to pump clean samples," using rigorous multiphase flow techniques. All of the methods are explained in complete detail. Equations are offered for users to incorporate in their own models, but, for those needing immediate answers, convenient, easy-to-use software is available. The lead author is a well-known petrophysicist with hands-on experience at Schlumberger, Halliburton, BP Exploration, and other companies. His work is used commercially at major oil service companies, and important extensions to his formation testing models have been supported by prestigious grants from the U.S. Department of Energy. His latest collaboration with China National Offshore Oil Corporation marks an important turning point, where advanced simulation models and hardware are evolving side-by-side, defining a new generation of formation testing logging instruments. Providing more than formulations and solutions, this book offers a close look at "behind the scenes" formation tester development, as the China National Offshore Oil Corporation opens up its research, engineering, and manufacturing facilities through a collection of never-before-seen photographs, showing how formation testing tools are developed from start to finish.
Download or read book Systematic Approach to Analyzing and Integrating Well Test Data from Wireline Formation Tester WFT written by Sbusiso Mkhize and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Optimizing Wireline Formation Testing and Downhole Fluid Analysis to Address Fault Transmissivity in the Context of Reservoir Compartment Connectivity written by Thomas Pfeiffer and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Reservoir fluids are rarely found in homogeneous structures having homogeneous properties. The various elements and processes of the petroleum system result in complex fluid distributions and compositions. A sound understanding of these complexities can avoid disappointing results and costly mistakes when designing the completion and production of the reservoir. The earlier these complexities are understood in the exploration phase, the better are the chances of a successful decision making process in the design phase of the project. Assessing reservoir compartment connectivity is of paramount importance for a optimal field development. Recent technological advances in wireline formation testing and sampling provide asset teams with a new methodology to evaluate in situ fluid properties and reservoir connectivity. After a review of the technology of downhole fluid analysis (DFA), the currently available methods of modeling equilibrated fluid gradients are presented. Fluid composition equilibrium is a stationary state where all components have reached zero mass flux. A reservoir model is designed to simulate numerically equilibration processes over geologic timescales at isothermal conditions where diffusion and gravity are the active mechanisms. A variety of initial conditions and reservoir fluid types is considered. Non-equilibrium fluid gradients and their transient behavior as they evolve towards fluid composition equilibrium are the main interest of this study. The results are compared in case studies, that are available in published literature. The modeling methods allow modeling of vertical and lateral fluid gradients. After a discussion of the cases, this thesis gives recommendations on 1) what fluid properties should be assessed and 2) how many data points are needed to reduce the chance of misinterpretation of non-equilibrium gradients in the presence of faults. To make best use DFA data, the property that exhibits the largest gradient needs to be investigated, as it yields the greatest potential to assess connectivity. The shape of the distribution of fluid composition within a compartment is found to be an important part in investigating reservoir connectivity. During data acquisition efforts should be made to acquire enough data points to reveal this shape. In combination with the presented techniques to identify non-equilibrium conditions, this will optimize DFA data acquisition and maximize the value of the data.
Download or read book Integration of Reservior sic Simulation and Wireline Formation Testing to Determine Near wellbore Permeability written by Logan Brooks and published by . This book was released on 2012 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: In addition to collecting reservoir fluid samples, wireline formation testing (WFT) provides flow rate and pressure measurements for a given formation within a short sampling period. The traditional interpretation method fails to accurately determine near-wellbore permeability due mainly to filtration invasion and short sampling time. The main objective of this project is to accurately determine near-wellbore permeablity by integrating reservoir simulation with WFT technique.
Download or read book Development Geology Reference Manual written by Diana Morton-Thompson and published by AAPG. This book was released on 1993 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: