Download or read book Wind Power and Analysis of Squirrel Cage Induction Generator Based Wind Farm written by Shripad Desai and published by GRIN Verlag. This book was released on 2018-09-11 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master's Thesis from the year 2018 in the subject Engineering - Power Engineering, grade: 9, , language: English, abstract: The rising demand of electricity and the environmental concern in the recent past necessities the need of renewable energy sources. The Renewable energy sources have gained major importance due to the depletion of the conventional fuels in the future. Among the available renewable sources the Wind energy has gained a significant importance due to its high efficiency and pollution free nature. Large Wind Farms have been set up to meet the energy demand globally. The capacity of the Wind Turbine Generator is being increased gradually from a few KW capacities in the beginning rising up to almost 5 MW in the present. More research has to be carried in this field to make it a dominant source for the rising energy demand. Wind energy potential has to be harnessed on a large scale in places which have high wind density. Before the actual commissioning of the Wind Farm on site, a wide range of analysis has to be carried in terms of simulation. This is done to understand the behavior of the system under various conditions and preventive actions if any are to be taken. The pre analysis gives us an idea of the selection of devices for higher efficiency and system reliability. This project is a research work carried in ETAP (Electrical Transient Analyzer Program), which is a Power System Simulation tool. The analysis carried out to demonstrate the capabilities of the SCIG (Squirrel Cage Induction Generator) based Wind Farm include Load Flow analysis, to find out the Power transferred to the Grid in normal condition at rated Wind Speed. Active Power Output at various Wind Speeds, which presents the efficiency of the Wind Farm at various range of wind speeds. Short Circuit analysis which is essential to determine the capability of the Wind Farm to recover from any abnormal conditions. Harmonic analysis to determine the Quality of power being delivered and the Harmonic Filter design to mitigate the Harmonic content if any in excess.Reactive Power analysis which is important considering the stability of the system and a suitable Capacitor design for reactive Power compensation. The WTG (Wind Turbine Generator) considered was a Type 2 Variable speed SCIG of 2.1 MW assigned in ETAP. The Wind Farm consisted of a total of 20 WTG’s with a total capacity of 42 MW. The results obtained were compared with the theoretical values and were found to be the same. The analysis performed presented a clear indication of the future of Wind Energy in SCIG based Wind Farms.

Download or read book Power Conversion and Control of Wind Energy Systems written by Bin Wu and published by John Wiley & Sons. This book was released on 2011-08-09 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the latest power conversion and control technology in modern wind energy systems. It has nine chapters, covering technology overview and market survey, electric generators and modeling, power converters and modulation techniques, wind turbine characteristics and configurations, and control schemes for fixed- and variable-speed wind energy systems. The book also provides in-depth steady-state and dynamic analysis of squirrel cage induction generator, doubly fed induction generator, and synchronous generator based wind energy systems. To illustrate the key concepts and help the reader tackle real-world issues, the book contains more than 30 case studies and 100 solved problems in addition to simulations and experiments. The book serves as a comprehensive reference for academic researchers and practicing engineers. It can also be used as a textbook for graduate students and final year undergraduate students.

Download or read book Power Conversion and Control of Wind Energy Systems written by Bin Wu and published by John Wiley & Sons. This book was released on 2011-09-26 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the latest power conversion and control technology in modern wind energy systems. It has nine chapters, covering technology overview and market survey, electric generators and modeling, power converters and modulation techniques, wind turbine characteristics and configurations, and control schemes for fixed- and variable-speed wind energy systems. The book also provides in-depth steady-state and dynamic analysis of squirrel cage induction generator, doubly fed induction generator, and synchronous generator based wind energy systems. To illustrate the key concepts and help the reader tackle real-world issues, the book contains more than 30 case studies and 100 solved problems in addition to simulations and experiments. The book serves as a comprehensive reference for academic researchers and practicing engineers. It can also be used as a textbook for graduate students and final year undergraduate students.

Download or read book Analysis of Reduced Order Models for Large Squirrel cage Induction Generators in Wind Turbine Applications written by F. Iov and published by . This book was released on 2003 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Condition Monitoring of Squirrel Cage Induction Generators in Wind Turbines written by Ian Radcliffe Kuiler and published by . This book was released on 2017 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Wind Energy Generation Modelling and Control written by Olimpo Anaya-Lara and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: WIND ENERGY GENERATION WIND ENERGY GENERATION MODELLING AND CONTROL With increasing concern over climate change and the security of energy supplies, wind power is emerging as an important source of electrical energy throughout the world. Modern wind turbines use advanced power electronics to provide efficient generator control and to ensure compatible operation with the power system. Wind Energy Generation describes the fundamental principles and modelling of the electrical generator and power electronic systems used in large wind turbines. It also discusses how they interact with the power system and the influence of wind turbines on power system operation and stability. Key features: Includes a comprehensive account of power electronic equipment used in wind turbines and for their grid connection. Describes enabling technologies which facilitate the connection of large-scale onshore and offshore wind farms. Provides detailed modelling and control of wind turbine systems. Shows a number of simulations and case studies which explain the dynamic interaction between wind power and conventional generation.

Download or read book Modeling and Control of Squirrel Cage Induction Generator with Full Power Converter Applied to Windmills written by Jose Luis Dominguez Garcia and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The project aims to develop a dynamic model, of a generation system of electrical energy with a variable speed wind turbine using a squirrel cage induction generator which is connected to the grid by a back to back frequency converter, for testing purposes. In the project has been done an analysis of the mathematical equations of the whole system, separating the mechanical system (turbine and gearbox) and the electrical (generator and converter). We study the control design of the machine which allow us to obtain the maximum wind power extraction, and we also study the control of the converter which couple the generator with the network. The proper functioning of the model is checked comparing the obtained results with some commonly known results.

Download or read book Wind Power in Power Systems written by Thomas Ackermann and published by John Wiley & Sons. This book was released on 2012-04-23 with total page 1132 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the highly acclaimed Wind Power in Power Systems has been thoroughly revised and expanded to reflect the latest challenges associated with increasing wind power penetration levels. Since its first release, practical experiences with high wind power penetration levels have significantly increased. This book presents an overview of the lessons learned in integrating wind power into power systems and provides an outlook of the relevant issues and solutions to allow even higher wind power penetration levels. This includes the development of standard wind turbine simulation models. This extensive update has 23 brand new chapters in cutting-edge areas including offshore wind farms and storage options, performance validation and certification for grid codes, and the provision of reactive power and voltage control from wind power plants. Key features: Offers an international perspective on integrating a high penetration of wind power into the power system, from basic network interconnection to industry deregulation; Outlines the methodology and results of European and North American large-scale grid integration studies; Extensive practical experience from wind power and power system experts and transmission systems operators in Germany, Denmark, Spain, UK, Ireland, USA, China and New Zealand; Presents various wind turbine designs from the electrical perspective and models for their simulation, and discusses industry standards and world-wide grid codes, along with power quality issues; Considers concepts to increase penetration of wind power in power systems, from wind turbine, power plant and power system redesign to smart grid and storage solutions. Carefully edited for a highly coherent structure, this work remains an essential reference for power system engineers, transmission and distribution network operator and planner, wind turbine designers, wind project developers and wind energy consultants dealing with the integration of wind power into the distribution or transmission network. Up-to-date and comprehensive, it is also useful for graduate students, researchers, regulation authorities, and policy makers who work in the area of wind power and need to understand the relevant power system integration issues.

Download or read book Modeling and Control of Static Converters for Hybrid Storage Systems written by Fekik, Arezki and published by IGI Global. This book was released on 2021-09-17 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: The energy transition initiated in recent years has enabled the growing integration of renewable production into the energy mix. Microgrids make it possible to maximize the efficiency of energy transmission from source to consumer by bringing the latter together geographically and by reducing losses linked to transport. However, the lack of inertia and the micro-grid support system makes it weak, and energy storage is necessary to ensure its proper functioning. Current storage technologies do not make it possible to provide both a large capacity of energy and power at the same time. Hybrid storage is a solution that combines the advantages of several technologies and reduces their disadvantages. Modeling and Control of Static Converters for Hybrid Storage Systems covers the modeling, control theorems, and optimization techniques that solve many scientific problems for researchers in the field of power converter control for renewable energy hybrid storage and places particular emphasis on the modeling and control of static converters for hybrid storage systems. Covering topics ranging from energy storage to power generation, this book is ideal for automation engineers, electrical engineers, mechanical engineers, professionals, scientists, academicians, master's and doctoral students, and researchers in the disciplines of electrical and mechanical engineering.

Download or read book Design of Smart Power Grid Renewable Energy Systems written by Ali Keyhani and published by John Wiley & Sons. This book was released on 2019-06-12 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Updated Third Edition Provides a Systems Approach to Sustainable Green Energy Production and Contains Analytical Tools for the Design of Renewable Microgrids The revised third edition of Design of Smart Power Grid Renewable Energy Systems integrates three areas of electrical engineering: power systems, power electronics, and electric energy conversion systems. The book also addresses the fundamental design of wind and photovoltaic (PV) energy microgrids as part of smart-bulk power-grid systems. In order to demystify the complexity of the integrated approach, the author first presents the basic concepts, and then explores a simulation test bed in MATLAB® in order to use these concepts to solve a basic problem in the development of smart grid energy system. Each chapter offers a problem of integration and describes why it is important. Then the mathematical model of the problem is formulated, and the solution steps are outlined. This step is followed by developing a MATLAB® simulation test bed. This important book: Reviews the basic principles underlying power systems Explores topics including: AC/DC rectifiers, DC/AC inverters, DC/DC converters, and pulse width modulation (PWM) methods Describes the fundamental concepts in the design and operation of smart grid power grids Supplementary material includes a solutions manual and PowerPoint presentations for instructors Written for undergraduate and graduate students in electric power systems engineering, researchers, and industry professionals, the revised third edition of Design of Smart Power Grid Renewable Energy Systems is a guide to the fundamental concepts of power grid integration on microgrids of green energy sources.

Download or read book Analysis of Sub synchronous Resonance SSR in Doubly fed Induction Generator DFIG Based Wind Farms written by Hossein Ali Mohammadpour and published by Springer Nature. This book was released on 2022-05-31 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind power penetration is rapidly increasing in today's energy generation industry. In particular, the doubly-fed induction generator (DFIG) has become a very popular option in wind farms, due to its cost advantage compared with fully rated converter-based systems. Wind farms are frequently located in remote areas, far from the bulk of electric power users, and require long transmission lines to connect to the grid. Series capacitive compensation of DFIG-based wind farm is an economical way to increase the power transfer capability of the transmission line connecting the wind farm to the grid. For example, a study performed by ABB reveals that increasing the power transfer capability of an existing transmission line from 1300 MW to 2000 MW using series compensation is 90% less expensive than building a new transmission line. However, a factor hindering the extensive use of series capacitive compensation is the potential risk of subsynchronous resonance (SSR). The SSR is a condition where the wind farm exchanges energy with the electric network, to which it is connected, at one or more natural frequencies of the electric or mechanical part of the combined system, comprising the wind farm and the network, and the frequency of the exchanged energy is below the fundamental frequency of the system. This oscillatory phenomenon may cause severe damage in the wind farm, if not prevented. Therefore, this book studies the SSR phenomenon in a capacitive series compensated wind farm. A DFIG-based wind farm, which is connected to a series compensated transmission line, is considered as a case study. The book consists of two main parts: Small-signal modeling of DFIG for SSR analysis: This part presents a step-by-step tutorial on modal analysis of a DFIG-based series compensated wind farm using Matlab/Simulink. The model of the system includes wind turbine aerodynamics, a 6th order induction generator, a 2nd order two-mass shaft system, a 4th order series compensated transmission line, a 4th order rotor-side converter (RSC) controller and a 4th order grid-side converter (GSC) controller, and a 1st order DC-link model. The relevant modes are identified using participation factor analysis. Definition of the SSR in DFIG-based wind farms: This part mainly focuses on the identification and definition of the main types of SSR that occur in DFIG wind farms, namely: (1) induction generator effect (SSIGE), (2) torsional interactions (SSTI), and (3) control interactions (SSCI).

Download or read book Model Predictive Control of Wind Energy Conversion Systems written by Venkata Yaramasu and published by John Wiley & Sons. This book was released on 2016-11-23 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Predictive Control of Wind Energy Conversion Systems addresses the predicative control strategy that has emerged as a promising digital control tool within the field of power electronics, variable-speed motor drives, and energy conversion systems. The authors provide a comprehensive analysis on the model predictive control of power converters employed in a wide variety of variable-speed wind energy conversion systems (WECS). The contents of this book includes an overview of wind energy system configurations, power converters for variable-speed WECS, digital control techniques, MPC, modeling of power converters and wind generators for MPC design. Other topics include the mapping of continuous-time models to discrete-time models by various exact, approximate, and quasi-exact discretization methods, modeling and control of wind turbine grid-side two-level and multilevel voltage source converters. The authors also focus on the MPC of several power converter configurations for full variable-speed permanent magnet synchronous generator based WECS, squirrel-cage induction generator based WECS, and semi-variable-speed doubly fed induction generator based WECS. Furthermore, this book: Analyzes a wide variety of practical WECS, illustrating important concepts with case studies, simulations, and experimental results Provides a step-by-step design procedure for the development of predictive control schemes for various WECS configurations Describes continuous- and discrete-time modeling of wind generators and power converters, weighting factor selection, discretization methods, and extrapolation techniques Presents useful material for other power electronic applications such as variable-speed motor drives, power quality conditioners, electric vehicles, photovoltaic energy systems, distributed generation, and high-voltage direct current transmission. Explores S-Function Builder programming in MATLAB environment to implement various MPC strategies through the companion website Reflecting the latest technologies in the field, Model Predictive Control of Wind Energy Conversion Systems is a valuable reference for academic researchers, practicing engineers, and other professionals. It can also be used as a textbook for graduate-level and advanced undergraduate courses.

Download or read book Response and Control of a Wind Farm of Different Zones and Generators written by Helmy El-Zoghby and published by LAP Lambert Academic Publishing. This book was released on 2013 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a wide areas wind farms, that composed of many connected zones of different wind turbines and different generators, this book aims to study, model, and simulate of a wind farm model that includes a wind turbine and three different types of generators. The proposed generators are, three phase synchronous generator, three phase squirrel-cage induction generator and three phase doubly-fed induction generator, these generators are the main machines that generally used in the field of wind energy generation. All generators are connected in parallel at the point of common coupling (pcc) and connected to the utility grid. Different line faults are simulated, and wind power system stabilization is achieved using pitch controller. Several experimental results were taken and discussed in this book.

Download or read book Modeling and Analysis of Doubly Fed Induction Generator Wind Energy Systems written by Lingling Fan and published by Academic Press. This book was released on 2015-04-16 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind Energy Systems: Modeling, Analysis and Control with DFIG provides key information on machine/converter modelling strategies based on space vectors, complex vector, and further frequency-domain variables. It includes applications that focus on wind energy grid integration, with analysis and control explanations with examples. For those working in the field of wind energy integration examining the potential risk of stability is key, this edition looks at how wind energy is modelled, what kind of control systems are adopted, how it interacts with the grid, as well as suitable study approaches. Not only giving principles behind the dynamics of wind energy grid integration system, but also examining different strategies for analysis, such as frequency-domain-based and state-space-based approaches. Focuses on real and reactive power control Supported by PSCAD and Matlab/Simulink examples Considers the difference in control objectives between ac drive systems and grid integration systems

Download or read book Wind Energy Explained written by James F. Manwell and published by John Wiley & Sons. This book was released on 2010-09-14 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy’s bestselling textbook- fully revised. This must-have second edition includes up-to-date data, diagrams, illustrations and thorough new material on: the fundamentals of wind turbine aerodynamics; wind turbine testing and modelling; wind turbine design standards; offshore wind energy; special purpose applications, such as energy storage and fuel production. Fifty additional homework problems and a new appendix on data processing make this comprehensive edition perfect for engineering students. This book offers a complete examination of one of the most promising sources of renewable energy and is a great introduction to this cross-disciplinary field for practising engineers. “provides a wealth of information and is an excellent reference book for people interested in the subject of wind energy.” (IEEE Power & Energy Magazine, November/December 2003) “deserves a place in the library of every university and college where renewable energy is taught.” (The International Journal of Electrical Engineering Education, Vol.41, No.2 April 2004) “a very comprehensive and well-organized treatment of the current status of wind power.” (Choice, Vol. 40, No. 4, December 2002)

Download or read book Analysis of Electric Machinery and Drive Systems written by Paul C. Krause and published by John Wiley & Sons. This book was released on 2013-06-17 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing a new edition of the popular reference on machine analysis Now in a fully revised and expanded edition, this widely used reference on machine analysis boasts many changes designed to address the varied needs of engineers in the electric machinery, electric drives, and electric power industries. The authors draw on their own extensive research efforts, bringing all topics up to date and outlining a variety of new approaches they have developed over the past decade. Focusing on reference frame theory that has been at the core of this work since the first edition, this volume goes a step further, introducing new material relevant to machine design along with numerous techniques for making the derivation of equations more direct and easy to use. Coverage includes: Completely new chapters on winding functions and machine design that add a significant dimension not found in any other text A new formulation of machine equations for improving analysis and modeling of machines coupled to power electronic circuits Simplified techniques throughout, from the derivation of torque equations and synchronous machine analysis to the analysis of unbalanced operation A unique generalized approach to machine parameters identification A first-rate resource for engineers wishing to master cutting-edge techniques for machine analysis, Analysis of Electric Machinery and Drive Systems is also a highly useful guide for students in the field.

Download or read book Modeling and Analysis with Induction Generators written by M. Godoy Simões and published by CRC Press. This book was released on 2014-12-11 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its Third Edition, Alternative Energy Systems: Design and Analysis with Induction Generators has been renamed Modeling and Analysis with Induction Generators to convey the book's primary objective-to present the fundamentals of and latest advances in the modeling and analysis of induction generators. New to the Third EditionRevised equations