Download or read book Wind Loads Time Saving Methods Using the 2018 IBC and ASCE SEI 7 16 written by David A. Fanella and published by McGraw Hill Professional. This book was released on 2020-12-26 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concise, visual explanations of code provisions that apply to wind loads This practical guide provides engineers with a visual overview of the code provisions pertinent to wind loads. Free of complicated and confusing explanations, the book includes numerous design aids, figures, and flowcharts that clearly demonstrate the code provisions. Written by a recognized expert in the field, Wind Loads: Time-Saving Methods Using the 2018 IBC and ASCE/SEI 7-16 contains simplified, step-by-step procedures that can be applied to main wind force resisting systems and components and cladding of building and nonbuilding structures. Examples and companion online Excel spreadsheets can be used to accurately and efficiently calculate wind loads. Coverage includes wind load requirements for: Wind velocity pressure Gust effects on rigid and flexible buildings and other structures Main wind force resisting systems of buildings and other structures Components and cladding of buildings and other structures Enclosed, partially enclosed, partially open, and open buildings of all heights Low-rise buildings Roof overhangs and parapets Building appurtenances and other structures Solid freestanding walls and signs Chimneys, tanks, open signs, single-plane open frames, and trussed towers Rooftop structures and equipment Circular bins, silos, and tanks Rooftop solar panels
Download or read book Rain Snow and Ice Loads Time Saving Methods Using the 2018 IBC and ASCE SEI 7 16 written by David A. Fanella and published by McGraw Hill Professional. This book was released on 2020-09-18 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Concise, visual explanations of code provisions that apply to rain, snow, and ice loads This practical guide provides engineers with a visual overview of the code provisions pertinent to rain, snow, and ice loads. Rain, Snow, and Ice Loads: Time-Saving Methods Using the 2018 IBC and ASCE/SEI 7-16 contains simplified, step-by-step procedures that can be applied to determine each load. Included are design aids, figures, flowcharts, and examples that clearly demonstrate each procedure. Companion online Excel spreadsheets can be used in practice to calculate loads accurately and efficiently. Contains step-by-step procedures for: Design rain loads Ponding instability and ponding loads Flat roof snow loads Sloped roof snow loads Partial snow loads Unbalanced roof snow loads Drift loads on lower roofs and adjacent structures Drift loads adjacent to roof projections and parapets Sliding snow loads Rain-on-snow surcharge loads Snow loads on open-frame equipment structures Ice loads due to freezing rain
Download or read book Wind Loads written by William L Coulbourne and published by . This book was released on 2020 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authors Coulbourne and Stafford provide a comprehensive overview of the wind load provisions in Minimum Design Loads and Associated Criteria for Buildings and Other Structures, ASCE/SEI 7-16, focusing on the provisions that affect the planning, design, and construction of buildings for residential and commercial purposes.
Download or read book Structural Load Determination 2018 and 2021 IBC and ASCE SEI 7 16 written by David Fanella and published by McGraw Hill Professional. This book was released on 2018-09-07 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Calculate structural loads in compliance with the 2018 IBC® and ASCE/SEI 7-16This practical guide shows, step by step, how to interpret and apply the load provisions contained in the 2018 IBC® and ASCE/SEI 7-16. You will learn how to accurately determine structural loads including dead loads, live loads, and environmental loads. Throughout the book, detailed design examples, unique flowcharts, and design aids illustrate the proper usage of the code within the scope of everyday practice. Coverage includes:•Structural load fundamentals•IBC® and ASCE 7 explanations•Load combinations•Dead, live, rain, and soil lateral loads•Snow and ice loads•Wind loads•Earthquake loads•Flood and tsunami loads•Load paths
Download or read book Bangkok May 2010 written by Michael J Montesano and published by Institute of Southeast Asian Studies. This book was released on 2012 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a two-month stand-off between Red Shirt protestors and the government of Prime Minister Abhisit Vejjajiva, violence and arson scarred central Bangkok in mid-May 2010. This shocking turn of events underlined how poorly understood the deep divisions in the society and politics of Thailand remained, even five years into the country’s prolonged crisis. This volume collects analysis and commentary on those divisions from an unusually large and prominent group of Thai and foreign scholars and observers of the country. Contributions examine socio-economic, political, diplomatic, historical, cultural, and ideological issues with rare frankness, clarity, and lack of jargon.
Download or read book Seismic Loads Time Saving Methods Using the 2018 IBC and ASCE SEI 7 16 written by David A. Fanella and published by McGraw Hill Professional. This book was released on 2021-04-16 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concise, visual explanations of code provisions that apply to seismic loads This practical guide provides engineers with a visual overview of the code provisions pertinent to seismic loads. Seismic Loads: Time-Saving Methods Using the 2018 IBC and ASCE/SEI 7-16 contains simplified, step-by-step procedures that can be applied to determine seismic design criteria and requirements. Included are design aids, figures, flowcharts, and examples that clearly demonstrate each procedure. Companion online Excel spreadsheets can be used in practice to calculate loads accurately and efficiently. Contains step-by-step procedures for: Seismic ground motion values Site-specific ground motion Seismic design category Seismic design for building structures Equivalent lateral force procedure Vertical and horizontal distribution of seismic forces Story drift determination P-delta effects Diaphragms, chords, and collectors Seismic forces on walls and their anchorage Determining seismic forces using a simplified method Seismic design for nonstructural components Seismic forces on nonbuilding structures
Download or read book Reinforced Concrete Structures Analysis and Design written by David D. E. E. Fanella and published by McGraw Hill Professional. This book was released on 2010-12-06 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: A PRACTICAL GUIDE TO REINFORCED CONCRETE STRUCTURE ANALYSIS AND DESIGN Reinforced Concrete Structures explains the underlying principles of reinforced concrete design and covers the analysis, design, and detailing requirements in the 2008 American Concrete Institute (ACI) Building Code Requirements for Structural Concrete and Commentary and the 2009 International Code Council (ICC) International Building Code (IBC). This authoritative resource discusses reinforced concrete members and provides techniques for sizing the cross section, calculating the required amount of reinforcement, and detailing the reinforcement. Design procedures and flowcharts guide you through code requirements, and worked-out examples demonstrate the proper application of the design provisions. COVERAGE INCLUDES: Mechanics of reinforced concrete Material properties of concrete and reinforcing steel Considerations for analysis and design of reinforced concrete structures Requirements for strength and serviceability Principles of the strength design method Design and detailing requirements for beams, one-way slabs, two-way slabs, columns, walls, and foundations
Download or read book Building Design for Wind Forces A Guide to ASCE 7 16 Standards written by Rima Taher and published by McGraw Hill Professional. This book was released on 2018-08-24 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expert coverage of ASCE 7-16–compliant, wind-resistant engineering methods for safer, sounder low-rise and standard multi-story buildingsUsing the hands-on information contained in this comprehensive engineering guide you will be able to design and construct safer buildings that will better withstand extreme wind forces. Written by a recognized structural design expert, the book explains the general concepts and principles involved in the design of buildings and structures for wind forces. Structural systems used to resist wind forces are outlined and explained, in the context of both low-rise and high-rise buildings. Building Design for Wind Forces provides easy-to-follow summaries of complex ASCE 7-16 wind load provisions and shows how to apply the corresponding design procedures using practical examples. A detailed discussion of typical structural damage caused by extreme wind events such as hurricanes and tornadoes is presented along with design recommendations. Current wind engineering activities and recent research developments are discussed, and a general overview of wind tunnel procedures and an introduction to the concept of database-assisted design (DAD) is provided. Building Design for Wind Forces covers:•Wind forces and wind effects on buildings and structures•Wind load provisions of the ASCE 7-16 standard•Damage to structures caused by extreme wind events•Wind engineering activities and research trends•Structural systems for lateral loads•Tall buildings•Wind design procedures and wind load parameters•Wind loads on the Main Wind Force Resisting System (MWFRS)•Wind loads on Components and Cladding (C&C)•Wind loads on building appurtenances and other structures•Wind tunnels and the wind tunnel procedure•Database-assisted design (DAD)
Download or read book Intermediate Structural Analysis written by Chu-Kia Wang and published by McGraw-Hill College. This book was released on 1983 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NEHRP Recommended Provisions National Earthquake Hazards Reduction Program for Seismic Regulations for New Buildings and Other Structures Commentary written by United States. Federal Emergency Management Agency and published by . This book was released on 2001 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Foundation Design Principles and Practices written by Donald P. Coduto and published by Pearson Higher Ed. This book was released on 2013-10-03 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: For undergraduate/graduate-level foundation engineering courses. Covers the subject matter thoroughly and systematically, while being easy to read. Emphasizes a thorough understanding of concepts and terms before proceeding with analysis and design, and carefully integrates the principles of foundation engineering with their application to practical design problems.
Download or read book Structural Steel Designer s Handbook Sixth Edition written by Roger L. Brockenbrough and published by McGraw Hill Professional. This book was released on 2019-10-25 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. A fully updated source for structural steel design information Thoroughly revised for the latest advances, this comprehensive resource contains information essential to the design of steel structures. The book lays out the fundamentals of structural steel fabrication and erection followed by detailed design methods for steel beams, columns, tension components, roof systems, and connections. Design examples throughout the book clearly demonstrate how to apply complex code provisions in the field. You will get clear explanations of AISC 360-16, the AASHTO Standard Specification for Structural Steel Bridges, the AISI Cold-Formed Steel Standards, ASCE 7-16, and the 2018 IBC. Structural Steel Designer's Handbook, Sixth Edition, covers: • Properties of structural steels • Effects of steelmaking and fabrication • Fabrication and erection • Connections • Building codes, loads, and fire protection • Criteria for building design • Design of building members • Floor and roof systems • Lateral-force design • Cold-formed steel design • Highway bridge design criteria • Beam, girder, and truss bridges • Arch and cable-suspended bridges
Download or read book Foundation and Anchor Design Guide for Metal Building Systems written by Alexander Newman and published by McGraw Hill Professional. This book was released on 2012-09-22 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEET THE COMPLEX CHALLENGES OF METAL BUILDING SYSTEMS FOUNDATION DESIGN Expand your professional design skills and engineer safe, reliable foundations and anchors for metal building systems. Written by a practicing structural engineer, Foundation and Anchor Design Guide for Metal Building Systems thoroughly covers the entire process--from initial soil investigation through final design and construction. The design of different types of foundations is explained and illustrated with step-by-step examples. The nuts-and-bolts discussion covers the best design and construction practices. This detailed reference book explains how the design of metal building foundations differs from the design of conventional foundations and how to comply with applicable building codes while avoiding common pitfalls. COVERAGE INCLUDES: Metal building and foundation design fundamentals Soil types, properties, and investigation Unique aspects of foundation design for metal building systems Design of isolated column footings Foundation walls and wall footings Tie rods, hairpins, and slab ties Moment-resisting foundations Slab with haunch, trench footings, and mats Deep foundations Anchors in metal building systems Concrete embedments in metal building systems
Download or read book Unified Design of Steel Structures written by Louis F. Geschwindner and published by John Wiley & Sons. This book was released on 2011-12-20 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geschwindner's 2nd edition of Unified Design of Steel Structures provides an understanding that structural analysis and design are two integrated processes as well as the necessary skills and knowledge in investigating, designing, and detailing steel structures utilizing the latest design methods according to the AISC Code.The goal is to prepare readers to work in design offices as designers and in the field as inspectors. This new edition is compatible with the 2011 AISC code as well as marginal references to the AISC manual for design examples and illustrations, which was seen as a real advantage by the survey respondents. Furthermore, new sections have been added on: Direct Analysis, Torsional and flexural-torsional buckling of columns, Filled HSS columns, and Composite column interaction. More real-world examples are included in addition to new use of three-dimensional illustrations in the book and in the image gallery; an increased number of homework problems; and media approach Solutions Manual, Image Gallery.
Download or read book Wind Loads written by Kishor C. Mehta and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mehta and Coulbourne explain the wind load provisions of Standard ASCE/SEI 7-10 as they affect the planning, design, and construction of buildings for residential and commercial purposes.
Download or read book Minimum Design Loads for Buildings and Other Structures written by American Society of Civil Engineers and published by Amer Society of Civil Engineers. This book was released on 2000 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Engineering Handbook Fifth Edition written by Mustafa Mahamid and published by McGraw Hill Professional. This book was released on 2020-04-17 with total page 957 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. The industry-standard guide to structural engineering—fully updated for the latest advances and regulations For 50 years, this internationally renowned handbook has been the go-to reference for structural engineering specifications, codes, technologies, and procedures. Featuring contributions from a variety of experts, the book has been revised to align with the codes that govern structural design and materials, including IBC, ASCE 7, ASCE 37, ACI, AISC, AASHTO, NDS, and TMS. Concise, practical, and user-friendly, this one-of-a-kind resource contains real-world examples and detailed descriptions of today’s design methods. Structural Engineering Handbook, Fifth Edition, covers: • Computer applications in structural engineering • Earthquake engineering • Fatigue, brittle fracture, and lamellar tearing • Soil mechanics and foundations • Design of steel structural and composite members • Plastic design of steel frames • Design of cold-formed steel structural members • Design of aluminum structural members • Design of reinforced- and prestressed-concrete structural members • Masonry construction and timber structures • Arches and rigid frames • Bridges and girder boxes • Building design and considerations • Industrial and tall buildings • Thin-shell concrete structures • Special structures and nonbuilding structures
