Download or read book Willemite Based Glass Ceramic Doped by Different Percentage of Erbium Oxide and Sintered in Temperature of 500 1100C written by Gholamreza Vahedi Sarrigani and published by Springer. This book was released on 2019-03-12 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates the effect of sintering temperature on willemite based glass-ceramic doped with different content of Er2O3. It is the first to report research on producing willemite by using waste materials and using trivalent erbium (Er3+) as a dopant. This book provides a survey of the literature on glass and glass-ceramic, while comprehensive experiments and analysis have been performed on the material used.
Download or read book Effect of Various Oxide Additives on Sintering of BaO SiO2 System Glass Ceramics written by and published by . This book was released on 1992 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glass-ceramics can be produced by sintering and crystallization of a pressed glass powder pellet. Crystallization prior to complete densification results in a porous glass-ceramic. A small quantity of various oxides was added to and melted with 35.7 BaO-64.3 SiO2(mol%) glass and the sintering characteristic of the glass powder was evaluated in terms of the density relative to the bulk glass density after heating at a constant rate. Some oxide additives, such as Al2O3 and ZrO2, increased the per cent relative density while others, such as Na2O, decreased it. The achieved per cent relative density was compared with crystallization characteristics determined by differential thermal analysis (DTA) and viscosity determined by the beam-bending method. The per cent relative density showed a good correlation with the viscosity at the crystallization temperature, the higher per cent relative density being achieved for systems with the lower viscosity at the crystallization temperature ... Glass-ceramics, Sintering.
Download or read book The Periodic Table Nature s Building Blocks written by J. Theo Kloprogge and published by Elsevier. This book was released on 2020-11-18 with total page 931 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Periodic Table: Nature’s Building Blocks: An Introduction to the Naturally Occurring Elements, Their Origins and Their Uses addresses how minerals and their elements are used, where the elements come from in nature, and their applications in modern society. The book is structured in a logical way using the periodic table as its outline. It begins with an introduction of the history of the periodic table and a short introduction to mineralogy. Element sections contain their history, how they were discovered, and a description of the minerals that contain the element. Sections conclude with our current use of each element. Abundant color photos of some of the most characteristic minerals containing the element accompany the discussion. Ideal for students and researchers working in inorganic chemistry, minerology and geology, this book provides the foundational knowledge needed for successful study and work in this exciting area. Describes the link between geology, minerals and chemistry to show how chemistry relies on elements from nature Emphasizes the connection between geology, mineralogy and daily life, showing how minerals contribute to the things we use and in our modern economy Contains abundant color photos of each mineral that bring the periodic table to life
Download or read book Sintering of Ceramics written by Arunachalam Lakshmanan and published by BoD – Books on Demand. This book was released on 2012-03-02 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chapters covered in this book include emerging new techniques on sintering. Major experts in this field contributed to this book and presented their research. Topics covered in this publication include Spark plasma sintering, Magnetic Pulsed compaction, Low Temperature Co-fired Ceramic technology for the preparation of 3-dimesinal circuits, Microwave sintering of thermistor ceramics, Synthesis of Bio-compatible ceramics, Sintering of Rare Earth Doped Bismuth Titanate Ceramics prepared by Soft Combustion, nanostructured ceramics, alternative solid-state reaction routes yielding densified bulk ceramics and nanopowders, Sintering of intermetallic superconductors such as MgB2, impurity doping in luminescence phosphors synthesized using soft techniques, etc. Other advanced sintering techniques such as radiation thermal sintering for the manufacture of thin film solid oxide fuel cells are also described.
Download or read book Glass Chemistry written by Werner Vogel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glass Chemistry is concerned with the relation of chemical composition, structure and properties of various glasses. The book has been translated from the third German edition, which serves as a textbook for university students in materials sciences and a reference book for scientists and engineers in glass science and production. The central themes of the book are the chemistry and physics of glass. Detailed knowledge of the compositional and structural facts is the basis for the systematic development of new glasses as construction and optical materials. Glass Chemistry is an interdisciplinary book on the borderlines between chemistry, physics, mineralogy and even biology and medicine. The book represents a well balanced treatment for students, scientists and engineers.
Download or read book Sintering of Ceramics written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2007-07-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering of Ceramics provides the only comprehensive treatment of the theories and principles of sintering and their application to the production of advanced ceramics with the required target microstructure. Stemming from the author's bestselling text, Ceramic Processing and Sintering, this book includes additional material selected
Download or read book Ceramic and Glass Materials written by James F. Shackelford and published by Springer Science & Business Media. This book was released on 2008-04-12 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a concise, up-to-date book that covers a wide range of important ceramic materials used in modern technology. Chapters provide essential information on the nature of these key ceramic raw materials including their structure, properties, processing methods and applications in engineering and technology. Treatment is provided on materials such as alumina, aluminates, Andalusite, kyanite, and sillimanite. The chapter authors are leading experts in the field of ceramic materials. An ideal text for graduate students and practising engineers in ceramic engineering, metallurgy, and materials science and engineering.
Download or read book Glass Ceramic Technology written by Wolfram Holand and published by John Wiley & Sons. This book was released on 2012-06-08 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glass-ceramic materials share many properties with both glass and more traditional crystalline ceramics. This new edition examines the various types of glass-ceramic materials, the methods of their development, and their countless applications. With expanded sections on biomaterials and highly bioactive products (i.e., Bioglass and related glass ceramics), as well as the newest mechanisms for the development of dental ceramics and theories on the development of nano-scaled glass-ceramics, here is a must-have guide for ceramic and materials engineers, managers, and designers in the ceramic and glass industry.
Download or read book Environmental Barrier Coatings written by Kang N. Lee and published by MDPI. This book was released on 2020-12-29 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The global increase in air travel will require commercial vehicles to be more efficient than ever before. Advanced engine hot section materials are a key technology required to keep fuel consumption and emission to a minimum in next-generation gas turbines. Ceramic matrix composites (CMCs) are the most promising material to revolutionize gas turbine hot section materials technology because of their excellent high‐temperature properties. Rapid surface recession due to volatilization by water vapor is the Achilles heel of CMCs. Environmental barrier coatings (EBCs) is an enabling technology for CMCs, since it protects CMCs from water vapor. The first CMC component entered into service in 2016 in a commercial engine, and more CMC components are scheduled to follow within the next few years. One of the most difficult challenges to CMC components is EBC durability, because failure of EBC leads to a rapid reduction in CMC component life. Key contributors to EBC failure include recession, oxidation, degradation by calcium‐aluminum‐magnesium silicates (CMAS) deposits, thermal and thermo‐mechanical strains, particle erosion, and foreign object damage (FOD). Novel EBC chemistries, creative EBC designs, and robust processes are required to meet EBC durability challenges. Engine-relevant testing, characterization, and lifing methods need to be developed to improve EBC reliability. The aim of this Special Issue is to present recent advances in EBC technology to address these issues. In particular, topics of interest include but are not limited to the following: • Novel EBC chemistries and designs; • Processing including plasma spray, suspension plasma spray, solution precursor plasma spray, slurry process, PS-PVD, EB-PVD, and CVD; • Testing, characterization, and modeling; • Lifing.
Download or read book Introduction To Bioceramics An 2nd Edition written by Larry L Hench and published by World Scientific Publishing Company. This book was released on 2013-05-06 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second edition of the classic book An Introduction to Bioceramics which provides a comprehensive overview of all types of ceramic and glass materials that are used in medicine and dentistry. The enormous growth of the field of bioceramics is due to the recognition by the medical and dental community of the importance of bioactive materials to stimulate repair and regeneration of tissues. This edition includes 21 new chapters that document the science and especially the clinical applications of the new generation of bioceramics in the field of tissue regeneration and repair. Important socioeconomic factors influencing the economics and availability of new medical treatments are covered with updates on regulatory procedures for new biomaterials, methods for technology transfer and ethical issues.The book contains 42 chapters that offer the only comprehensive treatment of the science, technology and clinical applications of all types of bioceramic materials used in medicine and dentistry. Each chapter is written by leaders in their specialized fields and is a thorough review of the subject matter, unlike many conference proceedings. All chapters have been edited to reflect the same writing style, making the book an easy read. The completeness of treatment of all types of bioceramics and their clinical applications makes the book unique in the field and invaluable to all readers.
Download or read book Ceramic Materials written by C. Barry Carter and published by Springer Science & Business Media. This book was released on 2013-01-04 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic Materials: Science and Engineering is an up-to-date treatment of ceramic science, engineering, and applications in a single, comprehensive text. Building on a foundation of crystal structures, phase equilibria, defects, and the mechanical properties of ceramic materials, students are shown how these materials are processed for a wide diversity of applications in today's society. Concepts such as how and why ions move, how ceramics interact with light and magnetic fields, and how they respond to temperature changes are discussed in the context of their applications. References to the art and history of ceramics are included throughout the text, and a chapter is devoted to ceramics as gemstones. This course-tested text now includes expanded chapters on the role of ceramics in industry and their impact on the environment as well as a chapter devoted to applications of ceramic materials in clean energy technologies. Also new are expanded sets of text-specific homework problems and other resources for instructors. The revised and updated Second Edition is further enhanced with color illustrations throughout the text.
Download or read book Sintering written by Suk-Joong L. Kang and published by Elsevier. This book was released on 2004-11-27 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering is the process of forming materials and components from a powder under the action of thermal energy. It is a key materials science subject: most ceramic materials and many specialist metal powder products for use in key industries such as electronics, automotive and aerospace are formed this way. Written by one of the leading experts in the field, this book offers an unrivalled introduction to sintering and sintering processes for students of materials science and engineering, and practicing engineers in industry. The book is unique in providing a complete grounding in the principles of sintering and equal coverage of the three key sintering processes: densification, grain growth and microstructure. Students and professional engineers alike will be attracted by the emphasis on developing a detailed understanding of the theory and practical processes of sintering, the balanced coverage of ceramic and metal sintering, and the accompanying examination questions with selected solutions. - Delivering unrivalled depth of coverage on the basis of sintering, science, including thermodynamics and polycrystalline microstructure. - Unique in its balanced coverage of the three key sintering elements - densification, grain growth and microstructure. - A key reference for students and engineers in materials science and engineering, accompanied by examination questions and selected solutions.
Download or read book Ceramic Processing and Sintering written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2017-12-19 with total page 1144 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field's premiere source, this reference is extensively revised and expanded to collect hard-to-find applications, equations, derivations, and examples illustrating the latest developments in ceramic processing technology. This book is concerned primarily with the processing of polycrystalline ceramics and focuses on the widespread fabrication of ceramics by the firing of consolidated powders forms. A brief treatment of sol-gel processing is also included. Ceramic Processing and Sintering, Second Edition provides clear and intensive discussions on colloidal and sol-gel processing, sintering of ceramics, and kinetic processes in materials. From powder synthesis and consolidation to sintering and densification behavior, this latest edition emphasizes the impact of each processing procedure on ceramic properties. The second edition also contains new and extended discussions on colloid stability, polymer growth and gelation, additives in ceramic forming, diffusion and defect strucutre, normal and abnormal grain growth, microwave sintering, Rayleigh instability effects, and Ostwald ripening. Illustrating the interconnectedness between the various steps in the overall fabrication route, Ceramic Processing and Sintering, Second Edition approaches the fundamental issues of each process and show how they are applied to the practical fabrication of ceramics.
Download or read book Ceramic Processing written by R.A. Terpstra and published by Springer Science & Business Media. This book was released on 1995-07-31 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.
Download or read book Waste Materials and By Products in Concrete written by Rafat Siddique and published by Springer Science & Business Media. This book was released on 2007-11-13 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The amount and variety of waste that humanity dumps in landfill sites is nothing short of a scandal, believes Rafat Siddique, of Deemed University in Patiala, India. Instead, we ought to be building new homes out of it! Siddique shows in this important book that many non-hazardous waste materials and by-products which are landfilled, can in fact be used in making concrete and similar construction materials.
Download or read book Ceramic Processing written by Mohamed Rahaman and published by CRC Press. This book was released on 2006-08-07 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials scientists continue to develop stronger, more versatile ceramics for advanced technological applications, such as electronic components, fuel cells, engines, sensors, catalysts, superconductors, and space shuttles. From the start of the fabrication process to the final fabricated microstructure, Ceramic Processing covers all aspects of modern processing for polycrystalline ceramics. Stemming from chapters in the author's bestselling text, Ceramic Processing and Sintering, this book gathers additional information selected from many sources and review articles in a single, well-researched resource. The author outlines the most commonly employed ceramic fabrication processes by the consolidation and sintering of powders. A systematic approach highlights the importance of each step as well as the interconnection between the various steps in the overall fabrication route. The in-depth treatment of production methods includes powder, colloidal, and sol-gel processing as well as chemical synthesis of powders, forming, sintering, and microstructure control. The book covers powder preparation and characterization, organic additives in ceramic processing, mixing and packing of particles, drying, and debinding. It also describes recent technologies such as the synthesis of nanoscale powders and solid freeform fabrication. Ceramic Processing provides a thorough foundation and reference in the production of ceramic materials for advanced undergraduates and graduate students as well as professionals in corporate training or professional courses.
Download or read book An Introduction to Symmetric Functions and Their Combinatorics written by Eric S. Egge and published by American Mathematical Soc.. This book was released on 2019-11-18 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a reader-friendly introduction to the theory of symmetric functions, and it includes fundamental topics such as the monomial, elementary, homogeneous, and Schur function bases; the skew Schur functions; the Jacobi–Trudi identities; the involution ω ω; the Hall inner product; Cauchy's formula; the RSK correspondence and how to implement it with both insertion and growth diagrams; the Pieri rules; the Murnaghan–Nakayama rule; Knuth equivalence; jeu de taquin; and the Littlewood–Richardson rule. The book also includes glimpses of recent developments and active areas of research, including Grothendieck polynomials, dual stable Grothendieck polynomials, Stanley's chromatic symmetric function, and Stanley's chromatic tree conjecture. Written in a conversational style, the book contains many motivating and illustrative examples. Whenever possible it takes a combinatorial approach, using bijections, involutions, and combinatorial ideas to prove algebraic results. The prerequisites for this book are minimal—familiarity with linear algebra, partitions, and generating functions is all one needs to get started. This makes the book accessible to a wide array of undergraduates interested in combinatorics.
