Download or read book WHO Guidelines on Protecting Workers from Potential Risks of Manufactured Nanomaterials written by World Health Organization and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: World Health Organization has developed these guidelines with recommendations on how best to protect workers from the potential risks of manufactured nanomaterials (MNMs). The recommendations are intended to help policy-makers and professionals in the field of occupational health and safety in making decisions about the best protection against potential risks specific to MNMs in workplaces. These guidelines are also intended to support workers and employers. However, they are not intended as a handbook or manual for safe handling of MNMs in the workplace because this requires addressing more general occupational hygiene issues beyond the scope of these guidelines. The publication includes executive summary in Arabic, Chinese, French, Russian and Spanish.
Download or read book WHO Guidelines on Protecting Workers from Potential Risks of Manufactured Nanomaterials written by World Health Organization. Department of Public Health, Environmental and Social Determinants of Health and published by . This book was released on 2017 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term nanomaterials refers to materials that have at least one dimension (height, width or length) that is smaller than 100 nanometres (10-7 metre), which is about the size of a virus particle. This particular size dimension represents a major characteristic of manufactured nanomaterials (MNMs). The unique properties of MNMs may result in better paints, better drugs and faster electronics. However, for the same reason, MNMs may also present health hazards that differ from those of the substance in bulk form, and may require different test methods for hazard, exposure and risk assessment from their bulk material counterparts. There is currently a paucity of precise information about human exposure pathways for MNMs, their fate in the human body and their ability to induce unwanted biological effects such as generation of oxidative stress. Data from in vitro, animal and human MNM inhalation studies are available for only a few MNMs. So far, no long-term adverse health effects in humans have been observed. This could be due to the recent introduction of MNMs, the precautionary approach to avoid exposure and ethical concerns about conducting studies on humans. Health recommendations must, therefore, be based on extrapolation of the evidence from in vitro, animal or other studies from fields that involve exposure to nanoscale particles, such as air pollution, to the possible effects in humans. Workers in all countries will be at the front line of exposure to these materials, placing them at increased risk for potential adverse health effects. Therefore, WHO proposes these guidelines to policy makers and professionals in the field of occupational health and safety with recommendations on how best to protect workers from the potential risks of MNMs.
Download or read book Global Health Impacts of Nanotechnology Law written by Ilise L Feitshans and published by CRC Press. This book was released on 2018-05-24 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small things add up: trillions of dollars of products applying nanotechnology have been marketed to consumers promising new medicines, strong packaging to protect goods from contamination, stronger eyelash mascara and long-lasting lipstick, construction materials for housing, cheaper energy, and new drugs to fight cancer. Nanotechnology applications to consumer products represent a huge slice of daily economic life, heralding a revolutionary age for science and technology. How can the benefits of nanotechnology be realized while protecting public health? Global Health Impacts of Nanotechnology Law: A Tool for Stakeholder Engagement fills a major void in legal, scientific policy discourse about nanotechnology for people who are curious about nanoscience, bioethics, and law. The pioneering, plain-language text of Dr. Ilise L. Feitshans, international health law scholar and former international civil servant, enables readers to move comfortably across disciplines and explore how nanotechnology can reshape both commerce and public health to improve daily life worldwide.
Download or read book Nano Safety written by Dominick E. Fazarro and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-12-31 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology safety is the practice of handling engineered nanomaterials in production and manufacturing. Good practice consists of understanding and interpreting Material Safety Data Sheets, behaving safely when working with yet unknown nanomaterials, understanding health effects, and proactively creating safety measures against potential hazards. This book addresses nanotechnology risk management.
Download or read book Handbook of Nanoethics written by Gunjan Jeswani and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-09-07 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: With nanotechnology being a relatively new field, the questions regarding safety and ethics are steadily increasing with the development of the research. This book aims to give an overview on the ethics associated with employing nanoscience for products with everyday applications. The risks as well as the regulations are discussed, and an outlook for the future of nanoscience on a manufacturer’s scale and for the society is provided. Handbook of Nanoethics is perfect for , academicians and scientist, as well as all other industry professionals and researchers. It is a good introduction for newcomers in the field who do not want to dive deep into the details but are eager to understand the ethical challenges and possible solution related to nanotechnology and ethics.
Download or read book Nano Safety written by Dominick E. Fazarro and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-09-25 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology safety is the practice of handling engineered nanomaterials in production and manufacturing. Good practice consists of understanding and interpreting Material Safety Data Sheets, behaving safely when working with yet unknown nanomaterials, understanding health effects, and proactively creating safety measures against potential hazards. This book introduces nanotechnology risk management to readers from academia and industry.
Download or read book The ELSI Handbook of Nanotechnology written by Chaudhery Mustansar Hussain and published by John Wiley & Sons. This book was released on 2020-03-17 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook focuses on the recent advancements in Safety, Risk, Ethical Society and Legal Implications (ESLI) as well as its commercialization of nanotechnology, such as manufacturing. Nano is moving out of its relaxation phase of scientific route, and as new products go to market, organizations all over the world, as well as the general public, are discussing the environmental and health issues associated with nanotechnology. Nongovernmental science organizations have long since reacted; however, now the social sciences have begun to study the cultural portent of nanotechnology. Societal concerns and their newly constructed concepts, show nanoscience interconnected with the economy, ecology, health, and governance. This handbook addresses these new challenges and is divided into 7 sections: Nanomaterials and the Environment; Life Cycle Environmental Implications of Nanomanufacturing; Bioavailability and Toxicity of Manufactured Nanoparticles in Terrestrial Environments; Occupational Health Hazards of Nanoparticles; Ethical Issues in Nanotechnology; Commercialization of Nanotechnology; Legalization of Nanotechnology.
Download or read book Nanotechnology Standards written by Vladimir Murashov and published by Springer Science & Business Media. This book was released on 2011-02-01 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a team of experts, Nanotechnology Standards provides the first comprehensive, state-of-the-art reviews of nanotechnology standards development, both in the field of standards development and in specific areas of nanotechnology. It also describes global standards-developing processes for nanotechnology, which can be extended to other emerging technologies. For topics related to nanotechnology, the reviews summarize active areas of standards development, supporting knowledge and future directions in easy-to-understand language aimed at a broad technical audience. This unique book is also an excellent resource for up-to-date information on the growing base of knowledge supporting the introduction of nanotechnology standards and applications into the market. Praise for this volume: “This book provides a valuable and detailed overview of current activities and issues relevant to the area as well as a useful summary of the short history of standardization for nanotechnologies and the somewhat longer history of standardization in general. I have no hesitation in recommending this book to anyone with an interest in nanotechnologies whether it is from a technical or societal perspective.” --Dr. Peter Hatto, Director of Research, IonBond Limited, Durham, UK
Download or read book Handbook of Functionalized Nanomaterials for Industrial Applications written by Chaudhery Mustansar Hussain and published by Elsevier. This book was released on 2020-04-24 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functionalized nanomaterials have extremely useful properties, which can outperform their conventional counterparts because of their superior chemical, physical, and mechanical properties and exceptional formability. They are being used for the development and innovation in a range of industrial sectors. However, the use of functionalized nanomaterials is still in its infancy in many industrial settings. Functionalized nanomaterials have the potential to create cheaper and more effective consumer products and industrial processes. However, they also could have adverse effects on the environment, human health, and safety, and their sustainability is questionable, if used incorrectly. This book discusses the opportunities and challenges of using functionalized nanomaterials in a variety of major industrial sectors. Handbook of Functionalized Nanomaterials for Industrial Applications provides a concise summary of the major applications of functionalized nanomaterials in industry today. It covers the enhancements in industrial techniques and processes, due to functionalized nanomaterials, showing how they substantially improve the performance of existing procedures, and how they can deliver exciting consumer products more cheaply. Emphasis is given to greener approaches, leading to more sustainable products and devices. The legal, economical, and toxicity aspects of functionalized nanomaterials are also discussed in detail. Highlights established industrial applications of functionalized nanomaterials and discusses their future potential for a range of industrial sectors Discusses how functionalized nanomaterials are being used to create new types of commercial products and devices Assesses the challenges of using functionalized nanomaterials in industry, setting out major safety and regulatory challenges
Download or read book Health and Environmental Safety of Nanomaterials written by James Njuguna and published by Woodhead Publishing. This book was released on 2021-07-24 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Health and Environmental Safety of Nanomaterials: Polymer Nanocomposites and Other Materials Containing Nanoparticles was published in 2014, but since that time, new developments in the field of nanomaterials safety have emerged, both at release and exposure, along with the expanding applications of the nanomaterials side. Numerous studies have been dedicated to the issue of biophysical interactions of nanoparticles with the human body at the organ, cellular, and molecular levels. In this second edition, all the chapters have been brought fully up to date. There are also four brand new chapters on the biophysical interaction of nanoparticles with the human body; advanced modeling approaches to help elucidate the nanorisks; safety measures at work with nanoparticles; and the health and environmental risks of graphene. It provides key knowledge and information needs for all those who are working in the research and development sector and need to learn more about the safety of nanomaterials. • Focuses on the health and safety of polymer nanocomposites and other materials containing nanoparticles, as well as their medical and environmental implications • Discusses the fundamental nature of various biophysical interactions of nanoparticles with the human body • Looks at the physico-chemistry of nanoparticles and their uptake, translocation, transformation, transport, and biodistribution in mammalian and plant systems • Presents the structure–activity relationships and modeling of the interactions of nanoparticles with biological molecules, biochemical pathways, analysis of biomolecular signatures, and the development of biomarkers.
Download or read book Governing Nanotechnology Safety written by Ronit Justo-Hanani and published by Edward Elgar Publishing. This book was released on 2024-01-18 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examining one of the fastest growing industries in the world, Ronit Justo-Hanani compares the distinctly different approaches between both sides of the Atlantic when regulating the health, safety and environmental risks of nanotechnology and its novel properties.
Download or read book Emerging Chemical Risks in the Work Environment written by Małgorzata Pośniak and published by CRC Press. This book was released on 2020-06-08 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Around the world, the production and use of nanomaterials, as well as carcinogenic, mutagenic, reprotoxic substances (CMR) and endocrine disruptors has systematically increased. The increase in production has exposed workers to hazardous substances in practically all branches of the world economy. Readers will have access to up-to-date and comprehensive knowledge on emerging risks related to nanomaterials, endocrine disruptors, reprotoxic, carcinogenic and mutagenic substances, which are related to the development of technologies and workplaces. The book will provide the tools for occupational risk assessment of chemical substances for which there are no safety levels of exposure as well as an indication of methods and measurements to protect human health and reduce chemical risks at the workplace. This book creates awareness for employers, employees and safety experts about emerging risks related to chemical agents resulting in the reduction of cancer, reproductive system diseases, cases of abnormal child development, hormonal system disorders leading to abnormal metabolism, obesity, and diabetes. Features: Comprehensive information on emerging and newly identified chemical hazards Delivers the latest data on methods and tools for identification, assessing and reducing health risks Provides practical occupational safety advice and recommendations Real life examples from measurements carried out in the workplaces "The monograph, due to the high universality of its considerations, can be addressed to a very wide audience. It is an important compendium of knowledge, which can be used by health and safety services, employers, people designing new technologies and those interested in this issue. It is a valuable and up-to-date study, among others because it uses the latest literature and quotes current legal acts.” —Sławomir Czerczak, Nofer Institute of Occupational Medicine, Poland
Download or read book Nanotoxicology written by Hemant Kumar Daima and published by CRC Press. This book was released on 2021-07-15 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of nanomedicine has risen quickly due to the increasing number of designer-made nanomaterials. These nanomaterials have the potential to manage diseases and change the way medicine is currently studied. However, the increased practice of using nanomaterials has shed light on how many concepts of nanomedicine and nanotoxicity have been overlooked. Nanotoxicology: Toxicity Evaluation of Nanomedicine Applications addresses the existing gaps between nanomedicine and nanotoxicity. This book also brings together up-to-date knowledge on advances toward safe-by-design nanomaterials and existing toxicity challenges. This book delivers a comprehensive coverage in the field with fundamental understanding, serving as a platform to convey essential concepts of nanotoxicology and how these concepts can be employed to develop advanced nanomaterials for a range of biomedical applications. This book is an effort to answer some of the thoughtful nanotoxicological complications and their auspicious probable solutions with new approaches and careful toxicity assessment. Key Features: Reveals novel nanoscale approaches, toxicity assessment, and biomedical applications Includes importance of nanotoxicity concepts in developing smart nanomaterials Highlights unique contributions and "A to Z" aspects on the state-of-the-art from global leaders Offers a complete package to learn fundamentals with recommendations on nanomaterials toxicity and safe-by-design nanomedicines Nanotoxicology: Toxicity Evaluation of Nanomedicine Applications illuminates the high potential of many innovative nanomaterials, ultimately demonstrating them to be promising substitutes for available therapies that can be effectively used in fighting a myriad of biomedical complications. Further, this book reports legal, ethical, safety, and regulatory issues associated with nanomaterials, which have often been neglected, if not overlooked in literature and limiting clinical translation at nanoscale level. It will equip readers with cutting-edge knowledge of promising developments in nanomedicine and nanotoxicology, along with potential future prospects.
Download or read book Nanotoxicology in Safety Assessment of Nanomaterials written by Henriqueta Louro and published by Springer Nature. This book was released on 2022-05-18 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its advent, nanotechnologies are considered key enabling technologies that take advantage of a wide array of nanomaterials (NMs) for biomedical and industrial applications generating significant societal and economic benefits. However, such innovation increases human exposure to these substances through inhalation, ingestion or dermal contact raising public health concerns. Furthermore, the NMs’ specific physicochemical properties, that confer them unique beneficial characteristics, can also elicit nano-bio interactions leading to toxicity and concerns for public health. In addition, such properties can be affected by the surrounding matrix, particularly when incorporated in complex matrices such as food products, leading to secondary features potentially more relevant than primary characteristics for determining their toxicological outcome. These nano specific issues raise the question of whether the NMs may produce adverse outcomes that are not accounted for when using conventional toxicological approaches to assess their safety. Such uncertainties about the safety of NMs for human health and the environment may hamper a faster and more widespread exploration of their potentials. In response, the NMs definition has evolved, and nanotoxicology has developed towards new and more integrative approach methods to support regulatory and policy actions. This book provides a perspective on recent developments in the synthesis, application, and characterization of NMs and the related nanotechnologies, focusing on nanotoxicology for their accurate safety assessment early in the product development stage. The use of complex in vitro models, including multicellular systems and organoids, and “omics-based” approaches, such as transcriptomics or epigenomics, have greatly contributed to an in-depth understanding of the cellular and molecular mechanisms behind some NMs toxicity. Such mechanistic knowledge is equally addressed in this book and has set the basis for a predictive nanotoxicology approach building on adverse outcome pathways. In addition, considering the knowledge provided by the above-mentioned approaches, insights into risk assessment, standardization, and regulation of NMs are also included. Incorporating adequate nanosafety assessment early in the life-cycle of NMs will allow the implementation of the safe and sustainable-by-design paradigm enabling safety to keep pace with innovation. Chapters 10 and 15 are available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.
Download or read book Ethics in Nanotechnology written by Marcel Van de Voorde and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-09-07 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: With nanotechnology being a relatively new field, the questions regarding safety and ethics are steadily increasing with the development of the research. This book aims to give an overview on the ethics associated with employing nanoscience for products with everyday applications. The risks as well as the regulations are discussed, and an outlook for the future of nanoscience on a manufacturer’s scale and for the society is provided. Ethics in nanotechnology is a valuable resource for, philosophers, academicians and scientist, as well as all other industry professionals and researchers who interact with emerging social and philosophical ethical issues on routine bases. It is especially for deep learners who are enthusiastic to apprehend the challenges related to nanotechnology and ethics in philosophical and social education. This book presents an overview of new and emerging nanotechnologies and their societal and ethical implications. It is meant for students, academics, scientists, engineers, policy makers, ethicist, philosophers and all stakeholders involved in the development and use of nanotechnology.
Download or read book Nanomaterials Ecotoxicity Safety and Public Perception written by Mahendra Rai and published by Springer. This book was released on 2019-01-04 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The environment is prone to suffer pollution and toxic insult from generations of nanomaterials as well from accidental releases during production, transportation, and disposal operations. The NMs could interact with and cause adverse biological effects at cellular, subcellular, and molecular levels. Assessing potential environmental/ecological risks requires quality information on transport and fate of nanoparticles in the environment, exposures and vulnerabilities of organisms to the nanomaterials and standard methods for assessing toxicity for aquatic or terrestrial organisms and human health. The systematic risk characterization and evaluation of the safety of nanomaterials require a multidisciplinary approach and convergence of knowledge and efforts from researchers and experts from toxicology, biotechnology, materials science, chemistry, physics, engineering, and other branches of life sciences. Although studies are beginning to appear in the literature addressing the toxicity of various nanomaterials and their potential for exposure, at this stage definitive statements regarding the impacts of nanomaterials on human health and the environment remain sketchy requiring an increased level of precautions with regard to nanomaterials, as has happened with other emerging contaminants and technologies (e.g., biotechnology). The need for an increased level of understanding the perception of risk and of benefits will vary and is likely to influence public, regulatory, and non-governmental activities regarding risk and benefit evaluations. Systematic identification and assessment of the risks posed by any new technology are essential. A prudent, integrated, and holistic approach is required to develop best practices based on the scientific understanding about what we know and what we don’t know but need to know. Nanomaterials addresses key issues of ecotoxicological actions and effects of nanomaterials on life and environment, their threats, vulnerability, risks, and public perception. The readers learn to read bad news objectively and think about and search for ecological ‘green’ solutions to current environmental and ecological problems with blue, grey, brown, and red shades for building a sustainable ecosystem. It shows how this molecular terrain is a common ground for interdisciplinary research and education that will be an essential component of science, engineering and technology in the future. The book is divided into three sections. Section I includes general topics related to ecotoxicity of nanomaterials to microbes, plants, human and environment. Section 2 incorporates risks generated by the use of nanomaterials. Section 3 discusss safety issues and the public.
Download or read book Toxicity of Nanomaterials written by Suresh Pillai and published by CRC Press. This book was released on 2019-05-16 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: Choice Recommended Title, April 2020 This comprehensive book, edited by two leading experts in nanotechnology and bioengineering with contributions from a global team of specialists, provides a detailed overview of the environmental and health impacts associated with the toxicology of nanomaterials. Special attention is given to nanomaterial toxicity during synthesis, production and application, and chapters throughout are focused on key areas that are important for future research and development of nanomaterials. This book will be of interest to advanced students studying biomedical engineering and materials science, PhD researchers, post-docs and academics working in the area of nanotechnology, medicine, manufacturing and regulatory bodies. Features: Collates and critically evaluates various aspects of the toxicology of nanomaterials in one comprehensive text Discusses the various effects of nanocrystals including the morphologies on cytotoxicity, in addition to the environmental and cytotoxicity risks of graphene and 2D nanomaterials Explores practical methods of detection and quantification, with applications in the environmental and healthcare fields