Download or read book Web Crippling Behaviour and Design of Cold formed Ferritic Stainless Steel Channels written by Amirmohammad Yousefi and published by . This book was released on 2019 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design guidance for web crippling behaviour of cold-formed stainless steel channel members that is given in the relevant design standards has been determined empirically from experimental studies and theoretical analyses. This guidance has been developed for cold-formed carbon steel members. Applying this design guidance to cold-formed stainless steel channel members based on carbon steel results is potentially inaccurate due to the very different stress-strain characteristics of stainless steel compared with that for carbon steel. These differences are principally in carbon steel having a clearly defined yield point, compared with stainless steel and in stainless steel having significant strain hardening when behaving inelastically compared with carbon steel. This means that new guidance must be developed for safe and efficient design of cold-formed stainless steel channels subject to web crippling. The primary objective of the research undertaken which is described in this thesis has been to develop design equations for web crippling of cold-formed ferritic stainless steel channels, with and without circular web perforations, under interior-one-flange, end-one-flange, interior-two-flange and end-two-flange loading. This involved first 216 laboratory tests, covering the cases of flanges restrained and unrestrained to the load or reaction plates. Finite element models were developed and validated against these tests and then used to expand the scope of the study with 3,600 finite element results. The finite element results use nonlinear quasi-static finite element analysis with an implicit integration scheme, which has advantages over static and quasi-static with an explicit integration scheme analyses. The laboratory and finite element results have been used to propose design rules that can be incorporated into design practice and design standards, and which make a distinction between flanges restrained and unrestrained to the load or reaction plates and address the presence of circular web perforations. Neither of these are currently covered in any design standards. The web crippling strengths for the flanges unrestrained and restrained cases were found to be either too conservative or unreliable, when compared to the provisions of stainless steel design standards. Web crippling design equations and strength reduction factors are proposed that are shown to be reliable and conservative when compared against laboratory and numerical results.
Download or read book Web Crippling and Local Buckling Response of Stainless Steel Sections written by Marina Bock Montero and published by . This book was released on 2015 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis examines the response of stainless steel members when subjected to transverse and normal forces triggering the instability phenomena called web crippling and local buckling, respectively. Currently, the part of Eurocode dealing with stainless steel, EN 1993-1-4 (2006) misses design provisions for web crippling and the applicability of some of its aspects is yet to be fully verified especially for application to ferritic stainless steel. The first part of the thesis laid in the development of design equations for the treatment of web crippling in stainless steel sections which are currently designed following specifications given in EN 1993-1-3 (2006) for cold-formed carbon steel. Two design approaches were derived covering austenitic and ferritic stainless steels: an empiric equation, in line with the current provisions for web crippling design given in EN 1993-1-3 (2006); and an alternative semi-empiric design method based on strength curves which enables a better understanding of the phenomenon and showed to significantly improve web crippling predictions. For the second part of the thesis, the applicability of the local buckling design provisions given in EN 1993-1-4 (2006) to ferritic stainless steel was examined giving focus to the slenderness limits and the effective width equations. The results showed that EN 1993-1-4 (2006) can safely be applied to ferritic stainless steel, though the code is rather conservative in comparison with other methods. Finally, a modification of the effective width equation incorporating element interaction effects was proposed which allows an improvement of cross-section capacity predictions and enables to amend the effective width method to the same level of alternative design approaches but promoting the use of the concepts currently considered in Eurocode.
Download or read book Specification for the Design of Cold Formed Stainless Steel Structural Members written by American Society of Civil Engineers and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Specification for the Design of Cold-Formed Stainless Steel Structural Members, ASCE/SEI 8-XX provides design criteria for stainless steel structural members and connections in buildings and other statically loaded structures"--
Download or read book Recent Trends in Cold Formed Steel Construction written by Cheng Yu and published by Woodhead Publishing. This book was released on 2016-05-27 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Trends in Cold-Formed Steel Construction discusses advancements in an area that has become an important construction material for buildings. The book addresses cutting-edge new technologies and design methods using cold-formed steel as a main structural material, and provides technical guidance on how to design and build sustainable and energy-efficient cold-formed steel buildings. Part One of the book introduces the codes, specifications, and design methods for cold-formed steel structures, while Part Two provides computational analysis of cold-formed steel structures. Part Three examines the structural performance of cold-formed steel buildings and reviews the thermal performance, acoustic performance, fire protection, floor vibrations, and blast resistance of these buildings, with a final section reviewing innovation and sustainability in cold-formed steel construction. Addresses building sciences issues and provides performance solutions for cold-formed buildings Provides guidance for using the next generation design method, computational tools, and technologies Edited by an experienced researcher and educator with significant knowledge on new developments in cold-formed steel construction
Download or read book Emerging Trends in Composite Structures written by Md. Abdul Mannan and published by Springer Nature. This book was released on 2024-01-02 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of International Conference on Civil Engineering: Innovative Development in Engineering Advances (ICC IDEA 2023). This book covers the latest research in the areas of structural engineering and health monitoring, steel and composite structure, bridge and tunnel engineering, earthquake engineering, disaster management, and coastal and harbor engineering. The book is useful for researchers and professionals in related fields of civil engineering.
Download or read book FRP Strengthened Metallic Structures written by Xiao-Ling Zhao and published by CRC Press. This book was released on 2013-09-13 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Repairing or strengthening failing metallic structures traditionally involves using bulky and heavy external steel plates that often pose their own problems. The plates are generally prone to corrosion and overall fatigue. Fiber-reinforced polymer (FRP), a composite material made of a polymer matrix reinforced with fibers, offers a great alternativ
Download or read book Tubular Structures XV written by Eduardo de Miranda Batista and published by CRC Press. This book was released on 2015-04-23 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tubular Structures XV contains the latest scientific and engineering developments in the field of tubular structures, as presented at the 15th International Symposium on Tubular Structures (ISTS15, Rio de Janeiro, Brazil, 27-29 May 2015). The International Symposium on Tubular Structures (ISTS) has a long-standing reputation for being the principal
Download or read book Behavior of Cold formed Steel Web Elements with Web Openings Subjected to Web Crippling and a Combination of Bending and Web Crippling for Interior one flange Loading written by Sameer Ulhas Deshmukh and published by . This book was released on 1996 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Design and Manufacturing for Sustainable Environment written by Santhakumar Mohan and published by Springer Nature. This book was released on 2021-02-06 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020). The primary focus is on emerging materials and cutting-edge manufacturing technologies for sustainable environment. The book covers a wide range of topics such as advanced materials, vibration, tribology, finite element method (FEM), heat transfer, fluid mechanics, energy engineering, additive manufacturing, robotics and automation, automobile engineering, industry 4.0, MEMS and nanotechnology, optimization techniques, condition monitoring, and new paradigms in technology management. Contents of this book will be useful to students, researchers, and practitioners alike.
Download or read book Guide to Stability Design Criteria for Metal Structures written by Ronald D. Ziemian and published by John Wiley & Sons. This book was released on 2010-02-08 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to stability design criteria, fully updated and incorporating current research Representing nearly fifty years of cooperation between Wiley and the Structural Stability Research Council, the Guide to Stability Design Criteria for Metal Structures is often described as an invaluable reference for practicing structural engineers and researchers. For generations of engineers and architects, the Guide has served as the definitive work on designing steel and aluminum structures for stability. Under the editorship of Ronald Ziemian and written by SSRC task group members who are leading experts in structural stability theory and research, this Sixth Edition brings this foundational work in line with current practice and research. The Sixth Edition incorporates a decade of progress in the field since the previous edition, with new features including: Updated chapters on beams, beam-columns, bracing, plates, box girders, and curved girders. Significantly revised chapters on columns, plates, composite columns and structural systems, frame stability, and arches Fully rewritten chapters on thin-walled (cold-formed) metal structural members, stability under seismic loading, and stability analysis by finite element methods State-of-the-art coverage of many topics such as shear walls, concrete filled tubes, direct strength member design method, behavior of arches, direct analysis method, structural integrity and disproportionate collapse resistance, and inelastic seismic performance and design recommendations for various moment-resistant and braced steel frames Complete with over 350 illustrations, plus references and technical memoranda, the Guide to Stability Design Criteria for Metal Structures, Sixth Edition offers detailed guidance and background on design specifications, codes, and standards worldwide.
Download or read book ICSECM 2019 written by Ranjith Dissanayake and published by Springer Nature. This book was released on 2020-09-18 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights current research and developments in the area of Structural Engineering and Construction Management, which are important disciplines in Civil Engineering. It covers the following topics and categories of Structural Engineering. The main chapters/sections of the proceedings are Structural and Solid Mechanics, Construction Materials, Systems and Management, Loading Effects, Construction Safety, Architecture & Architectural Engineering, Coastal Engineering, Foundation engineering, Materials, Sustainability. The content of this book provides necessary knowledge for construction management practices, new tools and technologies on local and global levels in civil engineering which can mitigate the negative effects of built environment.
Download or read book Stability and Ductility of Steel Structures 2019 written by František Wald and published by CRC Press. This book was released on 2019-08-30 with total page 1373 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than forty years the series of International Colloquia on Stability and Ductility of Steel Structures has been supported by the Structural Stability Research Council (SSRC). Its objective is to present the latest results in theoretical, numerical and experimental research in the area of stability and ductility of steel and steel-concrete composite structures. In Stability and Ductility of Steel Structures 2019, the focus is on new concepts and procedures concerning the analysis and design of steel structures and on the background, development and application of rules and recommendations either appearing in recently published Codes or Specifications and in emerging versions, all in anticipation of the new edition of Eurocodes. The series of International Colloquia on Stability and Ductility of Steel Structures started in Paris in 1972, the last five being held in: Timisoara, Romania (1999), Budapest, Hungary (2002), Lisbon, Portugal (2006), Rio de Janeiro, Brazil (2010) and Timisoara, Romania (2016). The 2019 edition of SDSS is organized by the Czech Technical University in Prague.
Download or read book Web Crippling Behaviour of Cold formed Steel Member with Web Openings written by Asraf Uzzaman and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solid Oxide Fuel Cell Components written by Gurbinder Kaur and published by Springer. This book was released on 2015-12-08 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the various interfacial reactions that take place when glass seals come into contact with components of SOFCs in reducing and oxidizing conditions. In developing an understanding of the structure and function of SOFCs, interfacial compatibility is an imperative criterion. This book addresses the technical challenges of developing sealants to avoid leakage losses at high operating temperatures, which are profoundly impactful to the efficiency of the fuel cell. This resource is important for anyone working with or studying fuel cell design and development, and is a pivotal source of cutting-edge information for research groups actively engaged in developing hermetic and stable seals which show minimum interfacial chemical reaction with interconnect and electrolyte.
Download or read book Insights and Innovations in Structural Engineering Mechanics and Computation written by Alphose Zingoni and published by CRC Press. This book was released on 2016-11-25 with total page 2223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Insights and Innovations in Structural Engineering, Mechanics and Computation comprises 360 papers that were presented at the Sixth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2016, Cape Town, South Africa, 5-7 September 2016). The papers reflect the broad scope of the SEMC conferences, and cover a wide range of engineering structures (buildings, bridges, towers, roofs, foundations, offshore structures, tunnels, dams, vessels, vehicles and machinery) and engineering materials (steel, aluminium, concrete, masonry, timber, glass, polymers, composites, laminates, smart materials).
Download or read book Tubular Structures XVI written by Amin Heidarpour and published by CRC Press. This book was released on 2017-11-13 with total page 1352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tubular Structures XVI contains the latest scientific and engineering developments in the field of tubular steel structures, as presented at the 16th International Symposium on Tubular Structures (ISTS16, Melbourne, Australia, 4-6 December 2017). The International Symposium on Tubular Structures (ISTS) has a long-standing reputation for being the principal showcase for manufactured tubing and the prime international forum for presentation and discussion of research, developments and applications in this field. Various key and emerging subjects in the field of hollow structural sections are covered, such as: special applications and case studies, static and fatigue behaviour of connections/joints, concrete-filled and composite tubular members and offshore structures, earthquake and dynamic resistance, specification and standard developments, material properties and section forming, stainless and high-strength steel structures, fire, impact and blast response. Research and development issues presented in this topical book are applicable to buildings, bridges, offshore structures, cranes, trusses and towers. Tubular Structures XVI is thus a pertinent reference source for architects, civil and mechanical engineers, designers, steel fabricators and contractors, manufacturers of hollow sections or related construction products, trade associations involved with tubing, owners or developers of tubular structures, steel specification committees, academics and research students all around the world.
Download or read book Dictionary of Architecture and Building Construction written by Nikolas Davies and published by Routledge. This book was released on 2008 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: With more than 20,000 words and terms individually defined, the Dictionary offers huge coverage for anyone studying or working in architecture, construction or any of the built environment fields. The innovative and detailed cross-referencing system allows readers to track down elusive definitions from general subject headings. Starting from only the vaguest idea of the word required, a reader can quickly track down precisely the term they are looking for. The book is illustrated with stunning drawings that provide a visual as well as a textual definition of both key concepts and subtle differences in meaning. Davies and Jokiniemi's work sets a new standard for reference books for all those interested in the buildings that surround us. To browse the book and to see how this title is an invaluable resource for both students and professionals alike, visit www.architectsdictionary.com.
