Download or read book Wear Protection Properties of Carbon Overcoats on Thin Film Magnetic Media written by Becky Merrell May and published by . This book was released on 1986 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultrathin Carbon Based Overcoats for Extremely High Density Magnetic Recording written by Reuben Jueyuan Yeo and published by Springer. This book was released on 2017-06-20 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest research in ultrathin carbon-based protective overcoats for high areal density magnetic data storage systems, with a particular focus on hard disk drives (HDDs) and tape drives. These findings shed new light on how the microstructure and interfacial chemistry of these sub-20 nm overcoats can be engineered at the nanoscale regime to obtain enhanced properties for wear, thermal and corrosion protection – which are critical for such applications. Readers will also be provided with fresh experimental insights into the suitability of graphene as an atomically-thin overcoat for HDD media. The easy readability of this book will appeal to a wide audience, ranging from non-specialists with a general interest in the field to scientists and industry professionals directly involved in thin film and coatings research.
Download or read book Effect of Carbon Overcoat on Corrosion of Thin Film Magnetic Media written by Valérie Vivarès and published by . This book was released on 1998 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Protective Coatings and Thin Films written by Y. Pauleau and published by Springer Science & Business Media. This book was released on 1996-12-31 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume entitled "Protective Coatings and Thin Films : Synthesis, Characterization and Applications" contains the Proceedings of the NATO Advanced Research Workshop (ARW) held in Alvor, Portugal from May 30 to June 5, 1996. This NATO-ARW was an expert meeting on the surface protection and modification of solid materials subjected to interactions with the environment. The meeting attracted 10 key speakers, 40 contributing speakers and 3 observers from various countries. The existing knowledge and current status of the science and technology related to protective coatings and thin films were assessed through a series of oral presentations, key notes (titles underlined in the volume content) and contributed papers distributed over various sessions dealing with: (a) plasma-assisted physical and chemical vapor deposition processes to enhance wear and corrosion protection of materials, (b) low friction coatings operating in hostile environment (vacuum, space, extreme temperatures, . . . ), (c) polymer films for protection against mechanical damage and chemical attack, (d) characterization of the structure of films and correlations with mechanical properties, (e) wear and corrosion resistant thermal spray coatings, (f) functional gradient ceramic/metallic coatings produced by high energy laser beam and energetic deposition processes for high temperature applications, (g) protective coatings for optical systems, and (h) ion beam assisted deposition of coatings for protection of materials against aqueous corrosion.
Download or read book Tribology Data Handbook written by E. Richard Booser and published by CRC Press. This book was released on 1997-09-26 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is a useful aid for anyone working to achieve more effective lubrication, better control of friction and wear, and a better understanding of the complex field of tribology. Developed in cooperation with the Society of Tribologists and Lubrication Engineers and containing contributions from 74 experts in the field, the Tribology Data Handbook covers properties of materials, lubricant viscosities, and design, friction and wear formulae. The broad scope of this handbook includes military, industrial and automotive lubricant specifications; evolving areas of friction and wear; performance and design considerations for machine elements, computer storage units, and metal working; and more. Important guidelines for the monitoring, maintenance, and failure assessment of lubrication in automotive, industrial, and aircraft equipment are also included. Current environmental and toxicological concerns complete this one-stop reference. With hundreds of figures, tables, and equations, as well as essential background information explaining the information presented, this is the only source you need to find virtually any tribology information.
Download or read book Coatings Tribology written by Kenneth Holmberg and published by Elsevier. This book was released on 2009-03-18 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface coating field is a rapidly developing area of science and technology that offers new methods and techniques to control friction and wear. New coating types are continually being developed and the potential applications in different industrial fields are ever growing, ranging from machine components and consumer products to medical instruments and prostheses. This book provides an extensive review of the latest technology in the field, addressing techniques such as physical and chemical vapour deposition, the tribological properties of coatings, and coating characterization and performance evaluation techniques. Eleven different cases are examined in close detail to demonstrate the improvement of tribological properties and a guide to selecting coatings is also provided. This second edition is still the only monograph in the field to give a holistic view of the subject and presents all aspects, including test and performance data as well as insights into mechanisms and interactions, thus providing the level of understanding vital for the practical application of coatings. * An extensive review of the latest developments in the field of surface coatings * Presents both theory and practical applications * Includes a guide for selecting coatings
Download or read book Tribology of Diamond like Carbon Films written by Christophe Donnet and published by Springer Science & Business Media. This book was released on 2007-12-06 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights some of the most important structural, chemical, mechanical and tribological characteristics of DLC films. It is particularly dedicated to the fundamental tribological issues that impact the performance and durability of these coatings. The book provides reliable and up-to-date information on available industrial DLC coatings and includes clear definitions and descriptions of various DLC films and their properties.
Download or read book Tribology and Mechanics of Magnetic Storage Devices written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1035 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic recording is presently a $50 billion industry. It spans audio, video, and digi tal applications in the form of tapes and disks. The industry is expected to grow by a factor of five or more in the next decade. This growth will be accompanied by dramatic improvements in the technology, and the potential exists for magnetic-recording den sities to improve by at least one order of magnitude! Magnetic-recording process is accomplished by relative motion between a mag netic head and a magnetic medium. Types of magnetic media for digital recording are: flexible media (tapes and floppy disks) and rigid disks. Physical contact between head and medium occurs during starts and stops and hydrodynamic air film develops at high speeds. Hying heights (mean separation between head and medium) are on the order of 0. 1 micrometer comparable to surface roughness of the mating members. Need for higher and higher recording densities requires that surfaces be as smooth as possible and flying heights be as low as possible. Smoother surfaces lead to increased static/ kinetic friction and wear. In the case of magnetic tapes, in order to have high bit capac ity for a given size of a spool, we like to use as thin a tape substrate as possible. Thinner tapes are prone to local or bulk viscoelastic deformation during storage. This may lead to variations in head-tape separations resulting in problems in data reliability.
Download or read book Sputtering Materials for VLSI and Thin Film Devices written by Jaydeep Sarkar and published by William Andrew. This book was released on 2010-12-13 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: An important resource for students, engineers and researchers working in the area of thin film deposition using physical vapor deposition (e.g. sputtering) for semiconductor, liquid crystal displays, high density recording media and photovoltaic device (e.g. thin film solar cell) manufacturing. This book also reviews microelectronics industry topics such as history of inventions and technology trends, recent developments in sputtering technologies, manufacturing steps that require sputtering of thin films, the properties of thin films and the role of sputtering target performance on overall productivity of various processes. Two unique chapters of this book deal with productivity and troubleshooting issues. The content of the book has been divided into two sections: (a) the first section (Chapter 1 to Chapter 3) has been prepared for the readers from a range of disciplines (e.g. electrical, chemical, chemistry, physics) trying to get an insight into use of sputtered films in various devices (e.g. semiconductor, display, photovoltaic, data storage), basic of sputtering and performance of sputtering target in relation to productivity, and (b) the second section (Chapter 4 to Chapter 8) has been prepared for readers who already have background knowledge of sputter deposition of thin films, materials science principles and interested in the details of sputtering target manufacturing methods, sputtering behavior and thin film properties specific to semiconductor, liquid crystal display, photovoltaic and magnetic data storage applications. In Chapters 5 to 8, a general structure has been used, i.e. a description of the applications of sputtered thin films, sputtering target manufacturing methods (including flow charts), sputtering behavior of targets (e.g. current - voltage relationship, deposition rate) and thin film properties (e.g. microstructure, stresses, electrical properties, in-film particles). While discussing these topics, attempts have been made to include examples from the actual commercial processes to highlight the increased complexity of the commercial processes with the growth of advanced technologies. In addition to personnel working in industry setting, university researchers with advanced knowledge of sputtering would also find discussion of such topics (e.g. attributes of target design, chamber design, target microstructure, sputter surface characteristics, various troubleshooting issues) useful. . Unique coverage of sputtering target manufacturing methods in the light of semiconductor, displays, data storage and photovoltaic industry requirements Practical information on technology trends, role of sputtering and major OEMs Discussion on properties of a wide variety of thin films which include silicides, conductors, diffusion barriers, transparent conducting oxides, magnetic films etc. Practical case-studies on target performance and troubleshooting Essential technological information for students, engineers and scientists working in the semiconductor, display, data storage and photovoltaic industry
Download or read book Surface Coatings Technology written by B. D. Sartwell and published by Elsevier. This book was released on 2016-06-03 with total page 981 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface & Coatings Technology, Volume 61 presents the proceeding of the 20th International Conference on Metallurgical Coatings and Thin Films, held in San Diego, California, on April 19–23, 1993. This book discusses a variety of topics related to surface and coatings technology, including coatings for use at high temperature, hard coatings, and vapor deposition technology. Organized into 141 chapters, this compilation of papers begins with an overview of the coating requirements for long-life bucket protection, how each of these coating systems has performed, and the advantages and disadvantages of each. This text then discusses the gradient-free transition step achieved in the element analysis of the depth profiles. Other chapters consider the metastable yttrium oxide films that are synthesized using reactive sputter deposition. This book discusses as well the use of appropriate copper-based alloy coatings on structural components. The final chapter deals with the particle mechanical and thermal behavior in the process of high velocity oxy-fuel spraying. This book is a valuable resource for chemical engineers and metallurgists.
Download or read book Thin Film Diamond written by A.H. Lettington and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work, written by leading international authorities, deals with nucleation growth and processing, characterization and electrical, thermal, optical and mechanical properties of thin film diamond. The final chapters are devoted to the broad range of applications of this material.
Download or read book Nanotribology and Nanomechanics written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2008-05-10 with total page 1530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume serves as a timely, practical introduction to the principles of nanotribology and nanomechanics and applications to magnetic storage systems and MEMS/NEMS. Assuming some familiarity with macrotribology/mechanics, the book comprises chapters by internationally recognized experts, who integrate knowledge of the field from the mechanics and materials-science perspectives. Graduate students, research workers, and practicing engineers will find the book of value.
Download or read book Theoretical Experimental and Numerical Contributions to the Mechanics of Fluids and Solids written by James Casey and published by Birkhäuser. This book was released on 2012-12-06 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special issue of ZAMP is published to honor Paul M. Naghdi for his contributions to mechanics over the last forty years and more. It is offered in celebration of his long, productive career in continuum mechan ics; a career which has been marked by a passion for the intrinsic beauty of the subject, an uncompromising adherence to academic standards, and an untiring devotion to our profession. Originally, this issue was planned in celebration of Naghdi's 70th birthday, which occurred on 29 March 1994. But, as the papers were being prepared for the press, it became evident that the illness from which Professor Naghdi had been suffering during recent months was extremely serious. On 26 May 1994, a reception took place in the Department of Mechanical Engineering at Berkeley, at which Naghdi received The Berkeley Citation (which is given in lieu of an honorary degree) and where he was also presented with the Table of Contents of the present collection. Subse quently, he had the opportunity to read the papers in manuscript form. He was very touched that his colleagues had chosen to honor him with their fine contributions. The knowledge that he was held in such high esteem by his fellow scientists brought a special pleasure and consolation to him in his last weeks. On Saturday evening, 9 July 1994, Paul Naghdi succumbed to the lung cancer which he had so courageously endured.
Download or read book Nanotribology and Nanomechanics II written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2011-05-30 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: The comprehensive reference and textbook serves as a timely, practical introduction to the principles of nanotribology and nanomechanics. Assuming some familiarity with macroscopic tribology, the book comprises chapters by internationally recognized experts, who integrate knowledge of the field from the mechanics and materials-science perspectives. They cover key measurement techniques, their applications, and theoretical modelling of interfaces, each beginning their contributions with macro- and progressing to microconcepts.
Download or read book Environmental Studies of the Tribology of Thin Film Ceramic Overcoats written by John Ko-Jen Chen and published by . This book was released on 1991 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Raman Spectroscopy written by Ian R. Lewis and published by CRC Press. This book was released on 2001-08-08 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work covers principles of Raman theory, analysis, instrumentation, and measurement, specifying up-to-the-minute benefits of Raman spectroscopy in a variety of industrial and academic fields, and how to cultivate growth in new disciplines. It contains case studies that illustrate current techniques in data extraction and analysis, as well as over 500 drawings and photographs that clarify and reinforce critical text material. The authors discuss Raman spectra of gases; Raman spectroscopy applied to crystals, applications to gemology, in vivo Raman spectroscopy, applications in forensic science, and collectivity of vibrational modes, among many other topics.
Download or read book Developments in Data Storage written by S. N. Piramanayagam and published by John Wiley & Sons. This book was released on 2011-11-08 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: A timely text on the recent developments in data storage, from a materials perspective Ever-increasing amounts of data storage on hard disk have been made possible largely due to the immense technological advances in the field of data storage materials. Developments in Data Storage: Materials Perspective covers the recent progress and developments in recording technologies, including the emerging non-volatile memory, which could potentially become storage technologies of the future. Featuring contributions from experts around the globe, this book provides engineers and graduate students in materials science and electrical engineering a solid foundation for grasping the subject. The book begins with the basics of magnetism and recording technology, setting the stage for the following chapters on existing methods and related research topics. These chapters focus on perpendicular recording media to underscore the current trend of hard disk media; read sensors, with descriptions of their fundamental principles and challenges; and write head, which addresses the advanced concepts for writing data in magnetic recording. Two chapters are devoted to the highly challenging area in hard disk drives of tribology, which deals with reliability, corrosion, and wear-resistance of the head and media. Next, the book provides an overview of the emerging technologies, such as heat-assisted magnetic recording and bit-patterned media recording. Non-volatile memory has emerged as a promising alternative storage option for certain device applications; two chapters are dedicated to non-volatile memory technologies such as the phase-change and the magnetic random access memories. With a strong focus on the fundamentals along with an overview of research topics, Developments in Data Storage is an ideal reference for graduate students or beginners in the field of magnetic recording. It also serves as an invaluable reference for future storage technologies including non-volatile memories.
