Download or read book Wear In Advanced Engineering Applications And Materials written by Luis Rodriguez-tembleque and published by World Scientific. This book was released on 2022-03-10 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wear is one of the main reasons mechanical components and materials become inoperable, rendering enormous costs to society over time. Estimating wear allows engineers to predict the useful life of modern mechanical elements, reduce the costs of inoperability, or obtain optimal designs (i.e. selecting proper materials, shapes, and surface finishing according to mechanical conditions and durability) to reduce the impact of wear.Wear in Advanced Engineering Applications and Materials presents recent computational and practical research studying damage and wear in advanced engineering applications and materials. As such, this book covers numerical formulations based on the finite element method (FEM) — and the boundary element method (BEM) — as well as theoretical and experimental research to predict the wear response or life-limiting failure of engineering applications.
Download or read book Advanced Engineering of Materials Through Lasers written by J. Radhakrishnan and published by Springer Nature. This book was released on 2022-06-15 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals of different laser-based manufacturing and processing, namely laser shock peening, laser micromachining, laser cleaning, cladding, remelting, laser honing, and other several aspects of lasers. The book discusses the general laser interaction with different materials. The application of laser-based post-processing of additive manufacturing and repair engineering is reported. It also provides the reader with mechanism of lasers in manufacturing and recent developments in tools, technologies, controls, and operations.
Download or read book Eco Friendly Nano Hybrid Materials for Advanced Engineering Applications written by S. Ananda Kumar and published by CRC Press. This book was released on 2017-03-27 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book focuses on eco-friendly nanohybrid. It clearly summarizes the fundamentals and established techniques of synthesis and processing of eco-friendly nanohybrid materials to provide a systematic and coherent picture of synthesis and the processing of nanomaterials. The research on nanotechnology is evolving and expanding very rapidly. Nanotechnology represents an emerging technology that has the potential to have an impact on an incredibly wide number of industries, such as the medical, environmental, and pharmaceutical industries. There is a growing need to develop environmentally friendly processes for corrosion control that do not employ toxic chemicals. This book helps to fill this need. This volume is a comprehensive compilation of several trending research topics, such as fouling, energy-storing devices, water treatment, corrosion, biomaterials, and high performance materials. The topics are approached in an encompassing manner, covering the basics and the recent trends in this area, clearly defining the problems and suggesting potential solutions. Topics in the book include: Synthesis of complex polymer intermediates Synthesis of nanoparticles and nanofibers Binding interaction between nano- and micromaterials Fabrication of polymer nanocomposites Making of functionally terminated nanohybrid coatings Development of corrosion resistant coatings Antifouling coatings Bioceramic materials Materials for therapeutic and aesthetic applications Eco-Friendly Nano-Hybrid Materials for Advanced Engineering Applications will benefit a wide variety of those in this field, including: Shipping and coating industries encountering fouling problems Innovators in the field of energy storage and electrical equipment Developers of efficient water treatment systems Biomedical industries looking for novel bio-compatible materials Industries seeking high performance epoxy-based materials needed for specific applications
Download or read book Developments and Applications of Advanced Engineering Ceramics and Composites written by Mrityunjay Singh and published by Wiley-American Ceramic Society. This book was released on 2006-06-30 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a state-of-the-art collection of recent papers on the development and applications of advanced engineering ceramics and composites as presented at the 6th Pacific Rim Conference on Ceramic and Glass Technology (PacRim 6) in September of 2005 in Maui, Hawaii.
Download or read book Nanomechanics for Coatings and Engineering Surfaces written by Ben Beake and published by Elsevier. This book was released on 2024-11-05 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomechanics for Coatings and Engineering Surfaces: Test Methods, Development Strategies, Modeling Approaches, and Applications provides readers with an array of best practices for nanoindentation measurements as well as related small-scale test methods and how to translate test results into the development of improved coatings. A core theme of the book is explaining to readers exactly how, when, and why the nanomechanical properties of engineered surfaces relate to their wear resistance. The book starts with chapters that introduce the development and importance of nanomechanical testing and linkages between wear resistance and the mechanical properties of coatings before moving into discussions of various experimental methods and techniques, such as nanoindentation, continuous stiffness measurements, nano-scratch methods, high-temperature testing, nano-impact testing, and more. Other sections discuss modeling approaches such as finite element analysis, atomistic and molecular dynamics, and analytical methods. Design strategies and industrial applications are covered next, with a final section looking at trends and future directions. - Provides best practices in nanoindentation measurements and related small-scale test methods - Demonstrates how to use test results to develop improved coatings - Outlines modeling approaches and numerical simulations - Highlights selected applications for metallic nanocomposites, tribological coatings, solid lubricants, and aerospace coatings - Shows future directions for simulation of complex wear scenarios
Download or read book Biomimetic Principles and Design of Advanced Engineering Materials written by Zhenhai Xia and published by John Wiley & Sons. This book was released on 2016-08-29 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the structure-property-process relationship of biomaterials from engineering and biomedical perspectives, and the potential of bio-inspired materials and their applications. A large variety of natural materials with outstanding physical and mechanical properties have appeared in the course of evolution. From a bio-inspired viewpoint, materials design requires a novel and highly cross disciplinary approach. Considerable benefits can be gained by providing an integrated approach using bio-inspiration with materials science and engineering. The book is divided into three parts; Part One focuses on mechanical aspects, dealing with conventional material properties: strength, toughness, hardness, wear resistance, impact resistance, self-healing, adhesion, and adaptation and morphing. Part Two focuses on functional materials with unique capabilities, such as self-cleaning, stimuli-response, structural color, anti-reflective materials, catalytic materials for clean energy conversion and storage, and other related topics. Part Three describes how to mimic natural materials processes to synthesize materials with low cost, efficient and environmentally friendly approaches. For each chapter, the approach is to describe situations in nature first and then biomimetic materials, fulfilling the need for an interdisciplinary approach which overlaps both engineering and materials science.
Download or read book Advanced Engineering Materials written by Jianmin Zeng and published by Trans Tech Publications Ltd. This book was released on 2011-02-21 with total page 2561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the International Conference on Manufacturing Science and Engineering (ICMSE 2011), 9-11 April, 2011, Guilin, China
Download or read book Advanced Engineering Materials II written by Chun Xiang Cui and published by Trans Tech Publications Ltd. This book was released on 2012-06-14 with total page 2654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012), July 6-8, 2012, Zhuhai, China
Download or read book Materials Processing Fundamentals 2019 written by Guillaume Lambotte and published by Springer. This book was released on 2019-02-09 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes contributions from the Materials Processing Fundamentals Symposium held at the TMS 2019 Annual Meeting & Exhibition in San Antonio, Texas. This volume includes contributions on the physical and numerical modeling of materials processing, and covers a range of metals and minerals. Authors present models and results related the basics of processing such as extraction, joining, separation, and casting. The corresponding fundamentals of mass and heat transport as well as physical and thermodynamics properties are addressed, allowing for a cross-disciplinary vision of the field.
Download or read book Electrodeposition of Composite Materials written by A.M.A Mohamed and published by BoD – Books on Demand. This book was released on 2016-03-23 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocomposite coatings have various properties that can be utilized for corrosion protection and tribological improvements. Synthesis of the nanocomposite coatings using an electrodeposition method allows unique control of the experimental parameters. By fine tuning the experimental parameters, various compositions and properties can be obtained for the nanocomposite coatings. This book covers some of the electrochemical methods used for nanocomposite coating deposition as well as discusses in detail examples of several nanocomposite coating. The corrosion and tribological performance of the nanocomposite coatings are also covered and some nanocomposite coatings are discussed for specific technological areas, such as fuel cells and microelectronics.
Download or read book Wear written by Gwidon W. Stachowiak and published by John Wiley & Sons. This book was released on 2006-08-14 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is emerging from the realm of steam engines and crank-case lubricants and becoming key to vital new technologies such as nanotechnology and MEMS. Wear is an integral part of tribology, and an effective understanding and appreciation of wear is essential in order to achieve the reliable and efficient operation of almost any machine or device. Knowledge in the field has increased considerably over recent years, and continues to expand: this book is intended to stimulate its readers to contribute towards the progress of this fascinating subject that relates to most of the known disciplines in physical science. Wear – Materials, Mechanisms and Practice provides the reader with a unique insight into our current understanding of wear, based on the contributions of numerous internationally acclaimed specialists in the field. Offers a comprehensive review of current knowledge in the field of wear. Discusses latest topics in wear mechanism classification. Includes coverage of a wide variety of materials such as metals, polymers, polymer composites, diamonds, and diamond-like films and ceramics. Discusses the chemo-mechanical linkages that control tribology, providing a more complete treatment of the subject than just the conventional mechanical treatments. Illustrated throughout with carefully compiled diagrams that provide a unique insight into the controlling mechanisms of tribology. The state of the art research on wear and the mechanisms of wear featured will be of interest to post-graduate students and lecturers in engineering, materials science and chemistry. The practical applications discussed will appeal to practitioners across virtually all sectors of engineering and industry including electronic, mechanical and electrical, quality and reliability and design.
Download or read book Magnesium Technology 2012 written by Suveen Mathaudhu and published by Springer. This book was released on 2016-12-19 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, which takes place every year at the TMS Annual Meeting & Exhibition, is one of the largest yearly gatherings of magnesium specialists in the world. Papers are presented in all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2011 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, you'll find coverage of new and emerging applications in such areas as biomedicine and hydrogen storage.
Download or read book Silicon Carbide written by Moumita Mukherjee and published by BoD – Books on Demand. This book was released on 2011-10-10 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide (SiC) and its polytypes, used primarily for grinding and high temperature ceramics, have been a part of human civilization for a long time. The inherent ability of SiC devices to operate with higher efficiency and lower environmental footprint than silicon-based devices at high temperatures and under high voltages pushes SiC on the verge of becoming the material of choice for high power electronics and optoelectronics. What is more important, SiC is emerging to become a template for graphene fabrication, and a material for the next generation of sub-32nm semiconductor devices. It is thus increasingly clear that SiC electronic systems will dominate the new energy and transport technologies of the 21st century. In 21 chapters of the book, special emphasis has been placed on the materials aspects and developments thereof. To that end, about 70% of the book addresses the theory, crystal growth, defects, surface and interface properties, characterization, and processing issues pertaining to SiC. The remaining 30% of the book covers the electronic device aspects of this material. Overall, this book will be valuable as a reference for SiC researchers for a few years to come. This book prestigiously covers our current understanding of SiC as a semiconductor material in electronics. The primary target for the book includes students, researchers, material and chemical engineers, semiconductor manufacturers and professionals who are interested in silicon carbide and its continuing progression.
Download or read book Ceramic Materials written by Feng Shi and published by BoD – Books on Demand. This book was released on 2012-04-05 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text covers ceramic materials from the fundamentals to industrial applications. This includes their impact on the modern technologies, including nano-ceramic, ceramic matrix composites, nanostructured ceramic membranes, porous ceramics, and the sintering theory model of modern ceramics.
Download or read book Strength Of Materials written by Mr. Keshavaraj Girinivas and published by RK Publication. This book was released on 2024-07-27 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strength of Materials is a foundational the behavior of solid objects under various types of loading, such as tension, compression, bending, and torsion. It provides comprehensive coverage of core principles, including stress, strain, and material properties, with practical applications in engineering and design. The book integrates theory with problem-solving techniques, making it an essential guide for engineering students and professionals who need to understand material strength to predict failure points and ensure structural integrity. Through detailed examples and explanations, it bridges theoretical knowledge and real-world engineering applications.
Download or read book Machining of Light Alloys written by Diego Carou and published by CRC Press. This book was released on 2018-08-06 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium, magnesium and titanium are alloys of special interest for engineering applications in a wide range of sectors such as aeronautics, automotive and medical. Their low density, along with sufficient mechanical properties, makes them especially adequate for sectors such as transportation allowing diminishing weight less fuel consumption and emissions to the atmosphere. Nowadays, machining is still one the most important manufacturing processes, not only for metal parts, but also for specially designed hybrid parts for more demanding new applications. A wide range of valuable research has been done on the machining of conventional engineering materials. However, when dealing with light alloys and hybrid materials containing them, they need to face new challenges. Particularly, it is important to analyse the suitability of the machining of these alloys in the current context of Industry 4.0, focusing on the development of cost-effective and sustainable processes. This book is a comprehensive source on the machining of light alloys, presenting a collection of both experimental and review studies. The work is arranged in eight chapters, presented by a group of international scholars, which analyse the main problems related to the machining of these alloys from different perspectives. Key Features A comprehensive state-of-the-art reference source on machining of light alloys Provides research on conventional and non-conventional machining process Offers current research topics on sustainable machining Presents research on the machining of hybrid materials using light alloys Includes applications for Industry 4.0 environments Machining of Light Alloys: Aluminum, Titanium, and Magnesium The aim of the book is to serve as a tool for helping researchers and practitioners to face machining challenges and facilitating the development of new industrial applications for light alloys.
Download or read book Intelligent Manufacturing and Mechatronics written by Roshaliza Hamidon and published by Springer Nature. This book was released on with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt:
