Download or read book Water Distribution System Monitoring written by Abigail F. Cantor and published by CRC Press. This book was released on 2018-01-08 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: To keep drinking water safe involves more than following the letter of the law. This book introduces a comprehensive perspective and a proactive step-by-step approach to maintaining drinking water quality in distribution systems, and aids in delivering verifiably safe and economical water to end users. This second edition is updated throughout, and reflects the latest processes for improving drinking water quality in water systems and bringing those systems into compliance with the Lead and Copper Rule, the Disinfection By-Products Rule, and the Total Coliform Rule. It also presents the latest techniques for calming discolored water issues, keeping microbiological growth and biofilm formation in check, and preventing the formation of pinhole leaks in copper pipes. The book also aids in determining side effects of treatment chemicals, achieving simultaneous compliance with multiple regulations, and optimizing treatment chemical dosages.¿ A typical water distribution system is complex and chaotic with varying piping configurations, water flows, chemical reactions, and microbiological activity. It is, therefore, no surprise that monitoring and assessing water quality can be a daunting task. Water Distribution System Monitoring: A Practical Approach for Evaluating Drinking Water Quality simplifies this task by providing the tools for well-defined and measurable control of water quality.
Download or read book Drinking Water Distribution Systems written by National Research Council and published by National Academies Press. This book was released on 2006-12-22 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Protecting and maintaining water distributions systems is crucial to ensuring high quality drinking water. Distribution systems-consisting of pipes, pumps, valves, storage tanks, reservoirs, meters, fittings, and other hydraulic appurtenances-carry drinking water from a centralized treatment plant or well supplies to consumers' taps. Spanning almost 1 million miles in the United States, distribution systems represent the vast majority of physical infrastructure for water supplies, and thus constitute the primary management challenge from both an operational and public health standpoint. Recent data on waterborne disease outbreaks suggest that distribution systems remain a source of contamination that has yet to be fully addressed. This report evaluates approaches for risk characterization and recent data, and it identifies a variety of strategies that could be considered to reduce the risks posed by water-quality deteriorating events in distribution systems. Particular attention is given to backflow events via cross connections, the potential for contamination of the distribution system during construction and repair activities, maintenance of storage facilities, and the role of premise plumbing in public health risk. The report also identifies advances in detection, monitoring and modeling, analytical methods, and research and development opportunities that will enable the water supply industry to further reduce risks associated with drinking water distribution systems.
Download or read book Microbial Quality of Water Supply in Distribution Systems written by Edwin E. Geldreich and published by CRC Press. This book was released on 1996-01-18 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hidden problems, buried deep in the pipe networks of water distribution systems, are very serious potential threats to water quality. Microbial Quality of Water Supply in Distribution Systems outlines the processes and issues related to the degradation of water quality upon passage through networks of pipes, storage reservoirs, and standpipes on its way to the consumer. The risks associated with biofilm accumulation, bacteria, and other contaminants are discussed in great detail. In addition to its excellent microbiological coverage of organisms in drinking water and biofilms in distribution systems, Microbial Quality of Water Supply in Distribution Systems provides clear treatments of the technical and public communication issues most commonly affecting the quality of water and water supply systems. The inclusion of numerous case histories in this new book makes it a complete reference source for anyone concerned with water quality and water distribution systems.
Download or read book Drinking Water written by Cécile Marcil and published by Nova Science Publishers. This book was released on 2020-07-13 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Drinking Water: Quality Control, Distribution Systems and Treatment focuses on some of the technologies involved in water treatment processes, such as adsorption, co-precipitation, flocculation, and coagulation. The authors emphasize the newest easy processes, inadequacies, and prospects of drinking water treatment. In one study, a simple effective intervention for biochanin A in influent water using ZSM-5, a nano-porous crystalline zeolite, is described. In closing, a Sphingomonas paucimobilis strain isolated from an Indian drinking water system was evaluated for its ability to co-aggregate and form mixed biofilms with Salmonella typhimurium, Shigella flexneri, and Escherichia coli O57:H7"
Download or read book Handbook of Drinking Water Quality written by John DeZuane and published by John Wiley & Sons. This book was released on 1997-01-31 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Well-written and informative." --Richard Lewis, Lewis Information Systems "This [book] combines information which could possibly haverequired as many as four reference sources in the past." --Steven C. Messer In its first edition, John De Zuane's popular reference drewwide praise for being an insightful theoretical resource. Now, inthe second edition of Handbook of Drinking Water Quality, DeZuane builds on that legacy with the same practical and conceptualemphases, adding a wealth of new information that providesimmediate access to the data and guidelines needed to * understand the impact of drinking water parameters on publichealth * help build and operate water supply facilities * conduct reliable drinking water sampling, monitoring, andanalytical evaluation * implement potability standards from the source to the treatmentfacility, to storage, to the tap * write new standards and expand/modify existing standards asquickly as needed Preventing contamination of drinking water requires amultidisciplinary perspective, one that incorporates elements ofbacteriology, chemistry, physics, engineering, public health,preventive medicine, and control and evaluation management. In aconcise, easy-to-use format, Handbook of Drinking WaterQuality, Second Edition, describes * Data and guidelines from the World Health Organization and theEuropean Community used to develop drinking water standards * U.S. drinking water standards--their physical, chemical,microbiological, and radionuclide parameters and monitoringrequirements * EPA-approved analytical methods and the most effectivetreatment technologies for each contaminant * Critical concepts of water quality control as applied in watertreatment in conventional or chemical treatment plants * Disinfection and fluoridation requirements * Common problems with water distribution systems, including deadends, sediments, bacterial growth, insufficient pressure, and mainbreaks To keep pace with recent breakthroughs in scientific research,water analysis, and program implementation and monitoring, thisSecond Edition features expanded and updated informationon * All drinking water regulations issued since the previousedition in 1990 * Current drinking water standards adopted by the EuropeanCommunity * Lead poisoning, radon, and Cryptosporidium * Compulsory water treatment for lead and copper * Coliform Rule compliance (disinfection and filtration) * Trihalomethane reduction with ozonation As a quick reference, handbook, and technical manual Handbookof Drinking Water Quality, Second Edition, is an essentialvolume for engineers, water supply and treatment personnel,environmental scientists, public health officials, or anyoneresponsible for assuring the safety of drinking water.
Download or read book Evaluation of the Microbiology Standards for Drinking Water written by Charles W. Hendricks and published by . This book was released on 1979 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water Distribution System Operation and Maintenance written by Kenneth D. Kerri and published by . This book was released on 2000-02 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Identifying Future Drinking Water Contaminants written by National Research Council and published by National Academies Press. This book was released on 1999-09-30 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an increasing population, use of new and diverse chemicals that can enter the water supply, and emergence of new microbial pathogens, the U.S. federal government is faced with a regulatory dilemma: Where should it focus its attention and limited resources to ensure safe drinking water supplies for the future? Identifying Future Drinking Water Contaminants is based on a 1998 workshop on emerging drinking water contaminants. It includes a dozen papers that were presented on new and emerging microbiological and chemical drinking water contaminants, associated analytical and water treatment methods for their detection and removal, and existing and proposed environmental databases to assist in their proactive identification and regulation. The papers are preceded by a conceptual approach and related recommendations to EPA for the periodic creation of future Drinking Water Contaminant Candidate Lists (CCLsâ€"produced every five yearsâ€"include currently unregulated chemical and microbiological substances that are known or anticipated to occur in public water systems and that may pose health risks).
Download or read book Security of Water Supply Systems from Source to Tap written by Jaroslav Pollert and published by Springer Science & Business Media. This book was released on 2006-01-27 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reality of the post-September 11 situation forces the operators of water supply systems through the world to examine the security and safety of their systems, its vulnerability to intentional interference and sabotage with respect to quantity and quality of potable water. In assessing system vulnerability, there is an urgent need to develop emergency response plans providing ways and means for alternative water supply at the moment of system operation disruption, and system remediation and recovery after the attack. Security of Water Supply Systems: from Source to Tap presents the state-of-the art with a view to the future, conclusions from past experiences are highlighted and future developments are suggested in the field of drinking water safety.
Download or read book Drinking Water Quality and Contaminants Guidebook written by Joseph Cotruvo and published by CRC Press. This book was released on 2018-09-18 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: K347191 BCC Drinking water quality is a sensitive issue, and the public is constantly barraged by contaminant reports now routinely at parts-per-trillion. Protection from microbial disease risks from drinking water must always be predominant; trace chemicals usually fall farther down the scale of possible health risks, but even negligible detections raise public concerns. Drinking Water Quality and Contaminants Guidebook presents information and guidance on drinking water quality and regulatory issues reflecting experiences and judgments from the author’s more than 43 years of extensive experience. It contains digested comprehensive information on important chemical, microbial, and radionuclide water contaminants, and discussions of several drinking water-related policy issues. Information is presented for long-standing regulated contaminants and chemicals of emerging concern in understandable terms for professionals and non-experts alike. Dossiers contain readily accessed information on sources, physical and chemical properties, toxicity, analytical methodology, water treatment technology, regulations and health advisories, and also include World Health Organization Guidelines. Aesthetic and acceptance factors such as water hardness and salinity that influence public perceptions of drinking water quality are also addressed. Features: Compiles and interprets essential information on numerous key chemical, microbial, and radionuclide water contaminants Provides standardized entries for each contaminant, including occurrence, health, analytical, water treatment, regulations, and World Health Organization guidance and recommendations with source citations Examines many water-related topics including fracking, potable water reuse, desalination, boil water notices, bottled water, foodborne and waterborne disease, and public perceptions about public drinking water quality Provides essential information and the basis for management of many long-standing contaminants such as lead, mercury, disinfection by-products, E. coli, and also emerging issues such as legionella, glyphosate, BPA, and more
Download or read book Water Reuse written by National Research Council and published by National Academies Press. This book was released on 2012-07-17 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanding water reuse-the use of treated wastewater for beneficial purposes including irrigation, industrial uses, and drinking water augmentation-could significantly increase the nation's total available water resources. Water Reuse presents a portfolio of treatment options available to mitigate water quality issues in reclaimed water along with new analysis suggesting that the risk of exposure to certain microbial and chemical contaminants from drinking reclaimed water does not appear to be any higher than the risk experienced in at least some current drinking water treatment systems, and may be orders of magnitude lower. This report recommends adjustments to the federal regulatory framework that could enhance public health protection for both planned and unplanned (or de facto) reuse and increase public confidence in water reuse.
Download or read book Safe Water From Every Tap written by National Research Council and published by National Academies Press. This book was released on 1996-12-30 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small communities violate federal requirements for safe drinking water as much as three times more often than cities. Yet these communities often cannot afford to improve their water service. Safe Water From Every Tap reviews the risks of violating drinking water standards and discusses options for improving water service in small communities. Included are detailed reviews of a wide range of technologies appropriate for treating drinking water in small communities. The book also presents a variety of institutional options for improving the management efficiency and financial stability of water systems.
Download or read book Water Quality Treatment A Handbook on Drinking Water written by American Water Works Association and published by McGraw Hill Professional. This book was released on 2010-12-06 with total page 1696 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive water quality and treatment resource--fully revised and updated Comprehensive, current, and written by leading experts, Water Quality & Treatment: A Handbook on Drinking Water, Sixth Edition covers state-of-the-art technologies and methods for water treatment and quality control. Significant revisions and new material in this edition reflect the latest advances and critical topics in water supply and treatment. Presented by the American Water Works Association, this is the leading source of authoritative information on drinking water quality and treatment. NEW CHAPTERS ON: Chemical principles, source water composition, and watershed protection Natural treatment systems Water reuse for drinking water augmentation Ultraviolet light processes Formation and control of disinfection by-products DETAILED COVERAGE OF: Drinking water standards, regulations, goals, and health effects Hydraulic characteristics of water treatment reactors Gas-liquid processes and chemical oxidation Coagulation, flocculation, sedimentation, and flotation Granular media and membrane filtration Ion exchange and adsorption of inorganic contaminants Precipitation, coprecipitation, and precipitative softening Adsorption of organic compounds by activated carbon Chemical disinfection Internal corrosion and deposition control Microbiological quality control in distribution systems Water treatment plant residuals management
Download or read book Guidelines for Drinking water Quality written by World Health Organization and published by World Health Organization. This book was released on 1993 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume describes the methods used in the surveillance of drinking water quality in the light of the special problems of small-community supplies, particularly in developing countries, and outlines the strategies necessary to ensure that surveillance is effective.
Download or read book Losses in Water Distribution Networks written by M. Farley and published by IWA Publishing. This book was released on 2003-03-31 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a best practice manual for addressing water losses in water distribution networks worldwide. Systems and methodologies are presented for improving water loss and leakage management in a range of networks, from systems with a well-developed infrastructure to those in developing countries where the network may need to be upgraded. The key feature of the manual is a diagnostic approach to develop a water loss strategy - using the appropriate tools to find the right solutions - which can be applied to any network. The methods of assessing the scale and volume of water loss are outlined, together with the procedures for setting up leakage monitoring and detection systems. As well as real losses (leakage) procedures for addressing apparent losses, by introducing regulatory and customer metering policies are explained. Suggestions are made for demand management and water conservation programmes, to complement the water loss strategy. Recommendations are made for training workshops and operation and maintenance programmes to ensure skills transfer and sustainability. The manual is illustrated throughout with case studies. Losses in Water Distribution Networks will appeal to a wide range of practitioners responsible for designing and managing a water loss strategy. These include consultants, operations managers, engineers, technicians and operational staff. It will also be a valuable reference for senior managers and decision makers, who may require an overview of the principles and procedures for controlling losses. The book will also be suitable as a source document for courses in Water Engineering, Resource Management and Environmental Management.
Download or read book Heterotrophic Plate Counts and Drinking water Safety written by Jamie Bartram and published by IWA Publishing. This book was released on 2003-08-31 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterotrophic Plate Counts and Drinking-water Safety provides a critical assessment of the role of the Heterotrophic Plate Count (HPC) measurement in drinking water quality management. It was developed from an Expert workshop of 32 scientists convened by the World Health Organization and the WHO/NSF International Collaborating Centre for Drinking Water Safety and Treatment in Geneva, Switzerland. Heterotrophs are organisms, including bacteria, yeasts and moulds, that require an external source of organic carbon for growth. The HPC test (or Standard Plate Count), applied in many variants, is the internationally accepted test for measuring the hetrotrophic microorganism population in drinking water, and also other media. It measures only a fraction of the microorganisms actually present and does not distinguish between pathogens and non-pathogens. High levels of microbial growth can affect the taste and odor of drinking water and may indicate the presence of nutrients and biofilms which could harbor pathogens, as well as the possibility that some event has interfered with the normal production of the drinking water. HPC counts also routinely increase in water that has been treated by an in-line device such as a carbon filter or softener, in water-dispensing devices and in bottled waters and indeed in all water that has suitable nutrients, does not have a residual disinfectant, and is kept under sufficient conditions. There is debate among health professionals as to the need, utility or quantitative basis for health-based standards or guidelines relating to HPC-measured regrowth in drinking water. The issues that were addressed in this work include: the relationship between HPC in drinking water (including that derived from in-line treatment systems, dispensers and bottled water) and health risks for the general public the role of HPC as an indirect indicator or index for pathogens of concern in drinking water the role of HPC in assessing the efficacy and proper functioning of water treatment and supply processes the relationship between HPC and the aesthetic acceptability of drinking water. Heterotrophic Plate Counts and Drinking-water Safety provides valuable information on the utility and the limitations of HPC data in the management and operation of piped water systems as well as other means of providing drinking water to the public. It is of particular value to piped public water suppliers and bottled water suppliers, manufacturers and users of water treatment and transmission equipment and inline treatment devices, water engineers, sanitary and clinical microbiologists, and national and local public health officials and regulators of drinking water quality.
Download or read book Modeling Water Quality in Distribution Systems written by Robert Maurice Clark and published by Amer Water Works Assn. This book was released on 2012 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rev. ed. of: Modeling water quality in drinking water distribution systems / Robert M. Clark, Walter M. Grayman. 1998.
