Download or read book Waste Engine Oils written by Francois Audibert and published by Elsevier. This book was released on 2011-04-18 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste Engine Oils presents a complete description of the field of engine used oils, widely collected in the networks of services-stations and garages. It describes the manufacture of base oils in refineries, and mentions the main additives playing an essential role in the quality of the marketed finished oils. The organization of the different systems of collecting in order to obtain a waste oil regenerable or used as fuel are explained. This book covers the main operations of physical and chemical treatments required in waste oil regeneration by covering the fundamental principles techniques such as vacuum distillation, solvent deasphalting, and ultrafiltration. A wide part is dedicated to applications with the description of about twenty processes. In addition, the book describes several types of energetic valorizations which concern a quite important fraction of the collected oil volume.* Comprehensive approach of the waste oil valorization* Overview of chemical engineering operations applied to waste oil* Objective view of the given information on a subject giving rise to competitiveness between the two routes of volorization
Download or read book Encyclopedia of Lubricants and Lubrication written by Theo Mang and published by Springer. This book was released on 2014-01-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of lubricants in virtually all fields of the engineering industry is reflected by an increasing scientific research of the basic principles. Energy efficiency and material saving are just two core objectives of the employment of high-tech lubricants. The encyclopedia presents a comprehensive overview of the current state of knowledge in the realm of lubrication. All the aspects of fundamental data, underlying concepts and use cases, as well as theoretical research and last but not least terminology are covered in hundreds of essays and definitions, authored by experts in their respective fields, from industry and academic institutes.
Download or read book Waste Crankcase Oils written by Canada. Environment Canada and published by . This book was released on 1994 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The priority substance "waste crankcase oils" (WCOs) is defined as used- lubricating oils removed from the crankcase of internal combustion engines. For the purpose of this assessment, the life cycle of WCOs was considered to begin at the point of collection. During collection, WCOs are frequently mixed with other waste oils. Therefore, the definition of WCOs also includes these mixed waste oils. In this assessment, an attempt was made to follow the life cycle through to their ultimate disposal"--Synopsis.
Download or read book Refining Used Lubricating Oils written by James Speight and published by CRC Press. This book was released on 2014-04-07 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Used lubricating oil is a valuable resource. However, it must be re-refined mainly due to the accumulation of physical and chemical contaminants in the oil during service. Refining Used Lubricating Oils describes the properties of used lubricating oils and presents ways these materials can be re-refined and converted into useful lubricants as well as other products. It provides an up-to-date review of most of the processes for used lubricating oil refining that have been proposed or implemented in different parts of the world, and addresses feasibility and criteria for selecting a particular process. The book begins with an overview of lubricating oil manufacturing, both petroleum-based and synthetic-based. It reviews the types and properties of lubricating oils and discusses the characteristics and potential of used lubricating oils. The authors describe the basic steps of used oil treatment including dehydration, distillation or solvent extraction, and finishing. They explore the combustion of used oil for use as fuel, covering chemistry and equipment, fuel oil properties, and combustion emissions. The book considers alternative processing options such as refinery processing and re-refining. It also reviews the major refining processes that have been suggested over the years for used oil. These include acid/clay, simple distillation, combinations of distillation and hydrogenation, solvent extraction, filtration, and coking processes. The book addresses economic, life cycle assessment, and other criteria for evaluating the attractiveness of an oil recycling project, examining various costs and presenting an economic evaluation method using an Excel spreadsheet that can be downloaded from the publisher’s website. The book concludes with a chapter offering insights on how to choose the most suitable process technology.
Download or read book Design Aspects of Used Lubricating Oil Re Refining written by Firas Awaja and published by Elsevier. This book was released on 2006-06-06 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design Aspects of Used Lubricating Oil Re-Refining presents a feasible and comprehensive technology for recycling of used lubricating oils. This book discusses efficient and effective ways of reusing lubricating oil which, if implemented, will result in a better quality of life, the stability of the environment, the health of national economies and better relationships between nations. It presents essential experimental results for process designers and engineers to establish a complete process design. The conditions and behaviour in each step in the re-refining process, (dehydration, solvent extraction, solvent stripping, and vacuum distillation) are examined in order to discover ways to recover and reuse wastes that are produced by lubricating oils.•Addresses and demonstrates the current knowledge of the process behaviour and re-refining technology of used lubricating oils•Introduces background information on the lubrication, oil recycling industry outlining the major manufacturers and detailing their processes•Contains 94 figures and 22 tables that on results regarding the re-refining process behaviour of used lubricating oil
Download or read book Mitigating Environmental Impact of Petroleum Lubricants written by Ignatio Madanhire and published by Springer. This book was released on 2016-06-09 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores effective environmental impact mitigation for petroleum-based lubricants to reduce their negative persistence during usage and upon end-of-life disposal. The book reviews the basic tribology of lubricants as well as initiatives that may enhance the environmental and economic effectiveness of lubricating oils from the composition design perspective across industries. Considering the blending, application, and disposal of petroleum lubricants in a holistic manner, the book presents and extends current best practices that minimize or eliminate adverse environmental impact throughout the product’s life cycle. The book reviews methods including: raw material substitution, minimizing oil losses during and after manufacturing, raw material and energy consumption reduction, and environmentally friendly applications of oil disposal as ways forward for cleaner and more effective production. This book provides readers with strategies for incorporating cleaner production practices into their operations – a benefit to both environmental legal compliance and business competitiveness – all the while preserving the environment for sustainable development. The book is therefore of interest to both manufacturers and consumers in the lubricants industry.
Download or read book Waste Oil Study written by United States. Environmental Protection Agency and published by . This book was released on 1974 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is submitted to Congress in compliance with Section 104(m) of the Federal Water Pollution Control Act Amendments of 1972, Public Law 92-500. The report was prepared under the supervision of Mr. Kurt Jakobson, Chief, Agriculture and Spills Branch. Major inputs were provided by Dr. John Jaksch, Washington Environmental Research Center, Dr. Peter B. Lederman, Director, Industrial Waste Treatment Laboratory, and Dr. Thomas J. Padden, Agriculture and Spills Branch, Office of Research and Development. Appendices B, E, F, and G were prepared by the Environmental Law Institute, Washington, D.C. under contract to the Environmental Protection Agency. These appendices do not necessarily reflect views and policies of the Environmental Protection Agency.
Download or read book Oil in the Sea III written by National Research Council and published by National Academies Press. This book was released on 2003-03-14 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the early 1970s, experts have recognized that petroleum pollutants were being discharged in marine waters worldwide, from oil spills, vessel operations, and land-based sources. Public attention to oil spills has forced improvements. Still, a considerable amount of oil is discharged yearly into sensitive coastal environments. Oil in the Sea provides the best available estimate of oil pollutant discharge into marine waters, including an evaluation of the methods for assessing petroleum load and a discussion about the concerns these loads represent. Featuring close-up looks at the Exxon Valdez spill and other notable events, the book identifies important research questions and makes recommendations for better analysis ofâ€"and more effective measures againstâ€"pollutant discharge. The book discusses: Inputâ€"where the discharges come from, including the role of two-stroke engines used on recreational craft. Behavior or fateâ€"how oil is affected by processes such as evaporation as it moves through the marine environment. Effectsâ€"what we know about the effects of petroleum hydrocarbons on marine organisms and ecosystems. Providing a needed update on a problem of international importance, this book will be of interest to energy policy makers, industry officials and managers, engineers and researchers, and advocates for the marine environment.
Download or read book Handbook of Environmental Engineering Assessment written by Ravi Jain and published by Butterworth-Heinemann. This book was released on 2012-06-21 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is one of the most comprehensive books on complex subjects of environmental engineering assessment and planning. Addressing these issues requires an understanding of technical, economic, and policy perspectives; based upon extensive research and practical experience of the authors, these perspectives are thoughtfully and clearly presented. Covered in this book are subjects related to environmental engineering and planning which include environmental laws and regulations, international perspectives on environmental analysis engineering and planning, economic and social impact analysis, public participation, and energy and environmental implications of major public works and private projects. Contemporary issues ranging from climate change to ecorisk and sustainability are covered in a special section as well. Under Contemporary Challenges are environmental issues that have received considerable public support and concern; they include: climate change, acid rain, deforestation, endangered species, biodiversity, ecorisk, cultural resources, and sustainability. For most of these issues, there are scientific agreements and disagreements; there are many uncertainties, thus views differ widely. These topics are discussed in considerable detail. Notwithstanding uncertainties and differing views on such topics, all of this information is put in a policy context such that progress towards addressing these contemporary challenges can be made while consensus on the nature and extent of the problem and resultant solutions are being developed. The book provides considerable information about many timeless issues. These issues range from resources needed for sustaining the quality of life on the planet: air resources to natural resources. Specifically covered are: air, water, land, ecology, sound/noise, human aspects, economics, and resources. For each of these areas, some of the key elements are described so that one can effectively manage complex environmental engineering and planning requirements. Each of the elements are clearly defined and other information, such as how human activities affect the element, source of affects, variable to be measured, how such variables can be measured, data sources, and evaluation and interpretation of data, etc. are provided. Material presented provides a rich source of information so the reader can efficiently and effectively use it to make meaningful environmental engineering, planning, and management decisions. - Help with every aspect of analyzing the environmental implications of a project - Complete coverage of current approaches, practices, procedures, documentations, regulations, and issues related to environmental engineering and planning - Step-by-step directions for preparing environmental impact analysis, and environmental reports - Valuable expert advice on international perspectives, public participation, social and environmental impacts - A comprehensive write-up on contemporary issues ranging from climate change to sustainability - A comprehensive description and analysis of timeless issues ranging from air resources to natural resources
Download or read book EPA 670 2 written by and published by . This book was released on 1973-11 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Eco efficient Pavement Construction Materials written by F. Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2020-01-18 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eco-efficient Pavement Construction Materials acquaints engineers with research findings on new eco-efficient pavement materials and how they can be incorporated into future pavements. Divided into three distinctive parts, the book emphasizes current research topics such as pavements with recycled waste, pavements for climate change mitigation, self-healing pavements, and pavements with energy harvesting potential. Part One considers techniques for recycling, Part Two reviews the contribution of pavements for climate change mitigation, including cool pavements, the development of new coatings for high albedo targets, and the design of pervious pavements. Finally, Part Three focuses on self-healing pavements, addressing novel materials and design and performance. Finally, the book discusses the case of pavements with energy harvesting potential, addressing different technologies on this field. - Offers a clear and concise lifecycle assessment of asphalt pavement recycling for greenhouse gas emission with temporal aspects - Applies key research trends to green the pavement industry - Includes techniques for recycling waste materials, the design of cool pavements, self-healing mechanisms, and key steps in energy harvesting
Download or read book Backyard Biodiesel written by Lyle Estill and published by New Society Publishers. This book was released on 2015-04-01 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Make your own fuel, for a fraction of what you would pay at the pump. Small-scale home biodiesel production holds a singular attraction for the do-it-yourself enthusiast. While perhaps it can't save the world, this unique renewable fuel is economical, fun to make, better for the environment, and will help you reduce your dependence on Big Oil. And getting started is easier than you think. Backyard Biodiesel is written by two recognized experts in the field of small-scale biofuels. This comprehensive hands-on, practical, DIY guide includes: The basics of small-scale brewing-recipes, strategies, and technologies Advanced backyard analytics and troubleshooting Safety considerations and regulatory issues Topping up the tank-how to put your biodiesel to work for you. Making your own fuel is not only possible, it is rewarding. Designed to be accessible to everyone from readers with no prior technical expertise to alternative energy buffs, Backyard Biodiesel is a must-read for any aspiring brewer, packed with everything you need to get up and running quickly and safely.
Download or read book Alternative Energy Secrets written by Stephen D. Chastain and published by . This book was released on 2010 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Waste Oil Recycling and Disposal written by Norman J. Weinstein and published by . This book was released on 1974 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Toxicological Profile for Mineral based Crankcase Oil written by and published by . This book was released on 1997 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurements and Standards for Recycled Oil written by Donald A. Becker and published by . This book was released on 1977 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Separation Technologies for the Industries of the Future written by Panel on Separation Technology for Industrial Reuse and Recycling and published by National Academies Press. This book was released on 1999-01-22 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation processesor processes that use physical, chemical, or electrical forces to isolate or concentrate selected constituents of a mixtureare essential to the chemical, petroleum refining, and materials processing industries. In this volume, an expert panel reviews the separation process needs of seven industries and identifies technologies that hold promise for meeting these needs, as well as key technologies that could enable separations. In addition, the book recommends criteria for the selection of separations research projects for the Department of Energy's Office of Industrial Technology.
