Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 34 (thesis year 1989) a total of 13,377 theses titles from 26 Canadian and 184 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 34 reports theses submitted in 1989, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Download or read book Polymer Stress Reactions written by Antonio Casale and published by Elsevier. This book was released on 2012-12-02 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Stress Reactions, Volume 1: Introduction focuses on the interrelationship between polymer mechanochemistry and the stress-induced polymer reactions. This book discusses each nominal polymer state and describes the parameters and variables that are germane to the mechanically induced reactions in that state. The polymer degradation variables that are generally applicable to mechanochemistry, such as temperature and shear intensity, are also considered. This book consists of five chapters and begins with an overview of mechanochemistry and stress-induced polymer reactions, with particular reference to the distinction between mechanochemical reactions and other modes of reaction. The general regions of viscoelastic behavior for amorphous polymers where mechanochemistry may be conducted are also described. The next chapter explores the mechanisms underlying the modes of reaction in mechanochemistry, focusing on the effects of shear and applied stress as well as how bonds rupture. The discussion then turns to the influence of the principal variables in polymer mechanochemistry; characterization methods for evaluating the fundamentals of mechanochemistry; and methods for the synthesis of block and graft copolymers. This book is a valuable material for those interested in mechanochemistry in general and in polymer stress reactions in particular.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Pressure Chemistry and Physics of Polymers written by A.L. Kovarskii and published by CRC Press. This book was released on 1994-02-03 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Pressure Chemistry and Physics of Polymers is devoted to covering all areas of high-pressure polymer materials science. Topics addressed include the synthesis of polymers, changes in reactivity, structural transformations, molecular dynamics, relaxation processes, deformational properties, chemical modification, and the effect of shock waves and shear stresses. The authors' contributions reflect over 60 years of Soviet study in the field of physico-chemistry conducted at the major former Soviet Institutes of Chemical Physics, Organic Chemistry, Polymer Chemistry, and Physical Chemistry. Fundamental topics such as compressibility of polymers, polymerization under pressure, viscoelastic/deformational properties, and polymer modification are discussed with an eye toward materials development for improving physical models and methods of calculating the changing parameters of materials under pressure. The book is a valuable reference to data on mechanisms of physical and chemical processes, in addition to new experimental data for improving physical models and methods of calculating changes in material characteristics under compression loads. High-Pressure Chemistry and Physics of Polymers will be an important reference for graduate students and practicing professionals in polymer chemistry and polymeric materials.

Download or read book Solvent Crazing of Polymers written by A.L. Volynskii and published by Newnes. This book was released on 2012-12-02 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problems related to crazing in polymers are of special interest to polymer scientists since only polymers display this universal phenomenon and no analogues are available for low-molecular-mass compounds. The important problems of solvent crazing and the development of a universal description of polymer structure and properties have received much attention from many leading scientists. Nevertheless, some aspects of polymer crazing are still unclear, and scientific activities in this area are in progress. This work provides an up-to-date account of scientific advances in the area of solvent crazing. The principal features and stages of solvent crazing (craze nucleation, craze tip advance, craze thickening, and craze collapse at high strains) are described. Additionally, the authors present information concerning the activities of Russian scientists in this area, which might have escaped the attention of their colleagues because of the language barrier.

Download or read book The Physics of Deformation and Fracture of Polymers written by A. S. Argon and published by Cambridge University Press. This book was released on 2013-03-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: A physical, mechanism-based presentation of the plasticity and fracture of polymers, covering industrial scale applications through to nanoscale biofluidic devices.

Download or read book Handbook Of Polymer Tribology written by Sujeet K Sinha and published by World Scientific. This book was released on 2018-03-07 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is a collection of authoritative information in the new and expanding field of polymer tribology. It brings together various research topics in the field of polymer tribology in a single volume, and provides relevant data in polymer tribology for research and industrial applications.The book's chapters are written by active, world-renowned researchers in the field. Subjects covered in this book range from the fundamentals of polymer tribology to highly applied topics such as machine element design (bearing and gears), hip prosthetic and microsystems applications.Readers in the field of tribology, in general, and polymer tribology, in particular, will find it very useful as it covers nearly all aspects of polymer tribology. Academics creating new courses based on polymer tribology will also find this book's comprehensive coverage valuable. Researchers will find this book a ready source of the state-of-the-art in the field of polymer tribology.

Download or read book Theoretical and Applied Rheology written by P. Moldenaers and published by Elsevier. This book was released on 2013-10-22 with total page 1110 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 900 authors from over 35 countries contributed to the 1992 International Congress on Rheology. These proceedings volumes comprise 17 plenary and keynote papers, 250 oral contributions and some 200 poster presentations. All relevant aspects of rheology are covered, e.g., theoretical rheology, molecular theories, fluid mechanics, rheometry, experimental methods, foams, polymer solutions, polymer melts, rubber, solids, composites, biorheology, industrial rheology, polymer processing, food rheology and electrorheology, reflecting the development of rheology into a broad, multidisciplinary field of recognized academic and industrial relevance.

Download or read book Mechanical Properties and Testing of Polymers written by G.M. Swallowe and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents a continuation of the Polymer Science and Technology series edited by Dr. D. M. Brewis and Professor D. Briggs. The theme of the series is the production of a number of stand alone volumes on various areas of polymer science and technology. Each volume contains short articles by a variety of expert contributors outlining a particular topic and these articles are extensively cross referenced. References to related topics included in the volume are indicated by bold text in the articles, the bold text being the title of the relevant article. At the end of each article there is a list of bibliographic references where interested readers can obtain further detailed information on the subject of the article. This volume was produced at the invitation of Derek Brewis who asked me to edit a text which concentrated on the mechanical properties of polymers. There are already many excellent books on the mechanical properties of polymers, and a somewhat lesser number of volumes dealing with methods of carrying out mechanical tests on polymers. Some of these books are listed in Appendix 1. In this volume I have attempted to cover basic mechanical properties and test methods as well as the theory of polymer mechanical deformation and hope that the reader will find the approach useful.

Download or read book MATERIALS SCIENCE AND ENGINEERING Volume I written by Rees D. Rawlings and published by EOLSS Publications. This book was released on 2009-12-05 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Science and Engineering theme is a component of Encyclopedia of Physical Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. Materials Science and Engineering is concerned with the development and selection of the best possible material for a particular engineering task and the determination of the most effective method of producing the materials and the component. The Theme with contributions from distinguished experts in the field, discusses Materials Science and Engineering. In this theme the history of materials is traced and the concept of structure (atomic structure, microstructure and defect structure) and its relationship to properties developed. The theme is structured in five main topics: Materials Science and Engineering; Optimization of Materials Properties; Structural and Functional Materials; Materials Processing and Manufacturing Technologies; Detection of Defects and Assessment of Serviceability; Materials of the Future, which are then expanded into multiple subtopics, each as a chapter. These three volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs.

Download or read book MATERIAL SELECTION AND CORROSION Volume I written by and published by EOLSS Publications. This book was released on 2010-12-15 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: These volumes are a component of Encyclopedia of Water Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The books are concerned with the development and selection of the best possible material for a particular engineering task and the determination of the most effective method of producing the materials and the component. The complexity of modern processing and the need for efficient production and use of materials are discussed and illustrated by examples from current practice. Properties are determined by structure, which in turn depends on the processing route. Theses volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy and Decision Makers.

Download or read book Constitutive Models for Rubber IX written by Bohdana Marvalova and published by CRC Press. This book was released on 2015-10-22 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unique properties of rubber make it ideal for use in a wide variety of engineering applications such as tyres, engine mounts, shock absorbers, flexible joints and seals. Developing diverse elastomeric elements for various structures involves numerical simulations of their performance, which are based on reliable constitutive models of the mater

Download or read book Encyclopedia of Polymer Science and Technology Concise written by Herman F. Mark and published by John Wiley & Sons. This book was released on 2013-10-16 with total page 1490 pages. Available in PDF, EPUB and Kindle. Book excerpt: The compact, affordable reference, revised and updated The Encyclopedia of Polymer Science and Technology, Concise Third Edition provides the key information from the complete, twelve-volume Mark's Encyclopedia in an affordable, condensed format. Completely revised and updated, this user-friendly desk reference offers quick access to all areas of polymer science, including important advances in nanotechnology, imaging and analytical techniques, controlled polymer architecture, biomimetics, and more, all in one volume. Like the twelve-volume full edition, the Encyclopedia of Polymer Science and Technology, Concise Third Edition provides both SI and common units, carefully selected key references for each article, and hundreds of tables, charts, figures, and graphs.

Download or read book Polymers Physical Properties written by and published by Academic Press. This book was released on 1980-04-16 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers Physical Properties

Download or read book Concise Encyclopedia of Biomedical Polymers and Polymeric Biomaterials written by Munmaya Mishra and published by CRC Press. This book was released on 2017-08-16 with total page 1800 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Concise Encyclopedia of Biomedical Polymers and Polymeric Biomaterials presents new and selected content from the 11-volume Biomedical Polymers and Polymeric Biomaterials Encyclopedia. The carefully culled content includes groundbreaking work from the earlier published work as well as exclusive online material added since its publication in print. A diverse and global team of renowned scientists provide cutting edge information concerning polymers and polymeric biomaterials. Acknowledging the evolving nature of the field, the encyclopedia also features newly added content in areas such as tissue engineering, tissue repair and reconstruction, and biomimetic materials.

Download or read book Proceedings of the International Congress on Rheology written by and published by . This book was released on 1965 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Behaviour of Materials V written by M. G. Yan and published by Elsevier. This book was released on 2013-10-22 with total page 1451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough up-to-date account of the latest developments in materials science and engineering research and applications. The contributed papers cover all aspects of this important field, including material aspects of fracture in engineering practice, fatigue criteria and material characterisation, environmental effects on fracture, high temperature deformation and failure and mechanical properties and engineering applications of composite and non-metallic materials. Contains approximately 200 papers from acknowledged experts.