Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 28 (thesis year 1 983) a total of 10,661 theses titles from 26 Canadian and 197 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 28 reports theses submitted in-1983, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book High Performance Design Automation for Multi chip Modules and Packages written by Jun-Dong Cho and published by World Scientific. This book was released on 1996 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's electronics industry requires new design automation methodologies that allow designers to incorporate high performance integrated circuits into smaller packaging. The aim of this book is to present current and future techniques and algorithms of high performance multichip modules (MCMs) and other packaging methodologies. Innovative technical papers in this book cover design optimization and physical partitioning; global routing/multi-layer assignment; timing-driven interconnection design (timing models, clock and power design); crosstalk, reflection, and simultaneous switching noise minimization; yield optimization; defect area minimization; low-power physical layout; and design methodologies. Two tutorial reviews review some of the most significant algorithms previously developed for the placement/partitioning, and signal integrity issues, respectively. The remaining articles review the trend of prime design automation algorithms to solve the above eight problems which arise in MCMs and other packages.
Download or read book Multistage Interconnection Network Design for Engineers written by Shilpa Gupta and published by Bentham Science Publishers. This book was released on 2023-12-14 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a quick and easy understanding of multistage interconnection networks (MINs) for engineers. The book contents focus on the design, performance metrics, and evaluation of these networks which are crucial in modern computer architecture. The contents equip engineering students, apprentices and professionals with in-depth knowledge and analysis of MINS, enabling them to build complex computer architectures for efficient data communications and cost effective solutions for circuit design. The book starts with an introduction to MINS and subsequently progresses to the evaluation of a range of MINS (SEN, Gamma-Minus, FTSN, FTGN, SEGIN). Key highlights of the book include: · Easy to understand notes on design, reliability and fault tolerance · Covers a wide range of MIN types with notes on design variants · Supplementary information aiding comprehension of the main content. · A curated list of references for further exploration and deeper understanding.
Download or read book VLSI 2010 Annual Symposium written by Nikolaos Voros and published by Springer Science & Business Media. This book was released on 2011-09-08 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: VLSI 2010 Annual Symposium will present extended versions of the best papers presented in ISVLSI 2010 conference. The areas covered by the papers will include among others: Emerging Trends in VLSI, Nanoelectronics, Molecular, Biological and Quantum Computing. MEMS, VLSI Circuits and Systems, Field-programmable and Reconfigurable Systems, System Level Design, System-on-a-Chip Design, Application-Specific Low Power, VLSI System Design, System Issues in Complexity, Low Power, Heat Dissipation, Power Awareness in VLSI Design, Test and Verification, Mixed-Signal Design and Analysis, Electrical/Packaging Co-Design, Physical Design, Intellectual property creating and sharing.
Download or read book VLSI Communication and Signal Processing written by R. K. Nagaria and published by Springer Nature. This book was released on 2023-07-01 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics in Electronics and Communication Engineering, especially in the area of microelectronics and VLSI design, communication systems and networks, and signal and image processing. The content is based on papers presented at the 5th International Conference on VLSI, Communication and Signal Processing (VCAS 2022). The book also discusses the emerging applications of novel tools and techniques in image, video, and multimedia signal processing. This book is useful to students, researchers, and professionals working in the electronics and communication domain.
Download or read book Proceedings written by and published by . This book was released on 1985 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book VLSI written by Tomasz Wojcicki and published by CRC Press. This book was released on 2017-12-19 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently the world celebrated the 60th anniversary of the invention of the first transistor. The first integrated circuit (IC) was built a decade later, with the first microprocessor designed in the early 1970s. Today, ICs are a part of nearly every aspect of our daily lives. They help us live longer and more comfortably, and do more, faster. All this is possible because of the relentless search for new materials, circuit designs, and ideas happening on a daily basis at industrial and academic institutions around the globe. Showcasing the latest advances in very-large-scale integrated (VLSI) circuits, VLSI: Circuits for Emerging Applications provides a balanced view of industrial and academic developments beyond silicon and complementary metal–oxide–semiconductor (CMOS) technology. From quantum-dot cellular automata (QCA) to chips for cochlear implants, this must-have resource: Investigates the trend of combining multiple cores in a single chip to boost performance of the overall system Describes a novel approach to enable physically unclonable functions (PUFs) using intrinsic features of a VLSI chip Examines the VLSI implementations of major symmetric and asymmetric key cryptographic algorithms, hash functions, and digital signatures Discusses nonvolatile memories such as resistive random-access memory (Re-RAM), magneto-resistive RAM (MRAM), and floating-body RAM (FB-RAM) Explores organic transistors, soft errors, photonics, nanoelectromechanical (NEM) relays, reversible computation, bioinformatics, asynchronous logic, and more VLSI: Circuits for Emerging Applications presents cutting-edge research, design architectures, materials, and uses for VLSI circuits, offering valuable insight into the current state of the art of micro- and nanoelectronics.
Download or read book Analysis and Design of Networks on Chip Under High Process Variation written by Rabab Ezz-Eldin and published by Springer. This book was released on 2015-12-16 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes in detail the impact of process variations on Network-on-Chip (NoC) performance. The authors evaluate various NoC topologies under high process variation and explain the design of efficient NoCs, with advanced technologies. The discussion includes variation in logic and interconnect, in order to evaluate the delay and throughput variation with different NoC topologies. The authors describe an asynchronous router, as a robust design to mitigate the impact of process variation in NoCs and the performance of different routing algorithms is determined with/without process variation for various traffic patterns. Additionally, a novel Process variation Delay and Congestion aware Routing algorithm (PDCR) is described for asynchronous NoC design, which outperforms different adaptive routing algorithms in the average delay and saturation throughput for various traffic patterns.
Download or read book Modeling Analysis and Optimization of Network on Chip Communication Architectures written by Umit Y. Ogras and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, design space exploration for Systems-on-Chip (SoCs) has focused on the computational aspects of the problem at hand. However, as the number of components on a single chip and their performance continue to increase, the communication architecture plays a major role in the area, performance and energy consumption of the overall system. As a result, a shift from computation-based to communication-based design becomes mandatory. Towards this end, network-on-chip (NoC) communication architectures have emerged recently as a promising alternative to classical bus and point-to-point communication architectures. In this dissertation, we study outstanding research problems related to modeling, analysis and optimization of NoC communication architectures. More precisely, we present novel design methodologies, software tools and FPGA prototypes to aid the design of application-specific NoCs.
Download or read book The Chip Is the Network written by Radu Marculescu and published by Now Publishers Inc. This book was released on 2008-12-24 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses the concept of network in three different contexts representing the deterministic, probabilistic, and statistical physics-inspired design paradigms.
Download or read book Real World Multicore Embedded Systems written by Bryon Moyer and published by Newnes. This book was released on 2013-02-27 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Expert Guide gives you the techniques and technologies in embedded multicore to optimally design and implement your embedded system. Written by experts with a solutions focus, this encyclopedic reference gives you an indispensable aid to tackling the day-to-day problems when building and managing multicore embedded systems. Following an embedded system design path from start to finish, our team of experts takes you from architecture, through hardware implementation to software programming and debug. With this book you will learn: • What motivates multicore • The architectural options and tradeoffs; when to use what • How to deal with the unique hardware challenges that multicore presents • How to manage the software infrastructure in a multicore environment • How to write effective multicore programs • How to port legacy code into a multicore system and partition legacy software • How to optimize both the system and software • The particular challenges of debugging multicore hardware and software - Examples demonstrating timeless implementation details - Proven and practical techniques reflecting the authors' expertise built from years of experience and key advice on tackling critical issues
Download or read book Proceedings of the 1995 International Conference on Parallel Processing written by Kyle Gallivan and published by CRC Press. This book was released on 1995-08-08 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set of technical books contains all the information presented at the 1995 International Conference on Parallel Processing. This conference, held August 14 - 18, featured over 100 lectures from more than 300 contributors, and included three panel sessions and three keynote addresses. The international authorship includes experts from around the globe, from Texas to Tokyo, from Leiden to London. Compiled by faculty at the University of Illinois and sponsored by Penn State University, these Proceedings are a comprehensive look at all that's new in the field of parallel processing.
Download or read book CONPAR 90 VAPP IV written by Helmar Burkhart and published by Springer Science & Business Media. This book was released on 1990-08-30 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel architectures are no longer pure research vehicles, as they were some years ago. There are now many commercial systems competing for market segments in scientific computing. The 1990s are likely to become the decade of parallel processing. CONPAR 90 - VAPP IV is the joint successor meeting of two highly successful international conference series in the field of vector and parallel processing. This volume contains the 79 papers presented at the conference. The various topics of the papers include hardware, software and application issues. Some of the session titles best reflect the contents: new models of computation, logic programming, large-grain data flow, interconnection networks, communication issues, reconfigurable and scalable systems, novel architectures and languages, high performance systems and accelerators, performance prediction / analysis / measurement, performance monitoring and debugging, compile-time analysis and restructurers, load balancing, process partitioning and concurrency control, visualization and runtime analysis, parallel linear algebra, architectures for image processing, efficient use of vector computers, transputer tools and applications, array processors, algorithmic studies for hypercube-type systems, systolic arrays and algorithms. The volume gives a comprehensive view of the state of the art in a field of current interest.
Download or read book Performance Analysis of Network Architectures written by Dietmar Tutsch and published by Springer Science & Business Media. This book was released on 2007-05-17 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three approaches can be applied to determine the performance of parallel and distributed computer systems: measurement, simulation, and mathematical methods. This book introduces various network architectures for parallel and distributed systems as well as for systems-on-chips, and presents a strategy for developing a generator for automatic model derivation. It will appeal to researchers and students in network architecture design and performance analysis.
Download or read book Interconnection Networks for High performance Parallel Computers written by Isaac D. Scherson and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1994 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Crossbar Based Interconnection Networks written by Mohsen Jahanshahi and published by Springer. This book was released on 2018-04-10 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique text/reference provides an overview of crossbar-based interconnection networks, offering novel perspectives on these important components of high-performance, parallel-processor systems. A particular focus is placed on solutions to the blocking and scalability problems. Topics and features: introduces the fundamental concepts in interconnection networks in multi-processor systems, including issues of blocking, scalability, and crossbar networks; presents a classification of interconnection networks, and provides information on recognizing each of the networks; examines the challenges of blocking and scalability, and analyzes the different solutions that have been proposed; reviews a variety of different approaches to improve fault tolerance in multistage interconnection networks; discusses the scalable crossbar network, which is a non-blocking interconnection network that uses small-sized crossbar switches as switching elements. This invaluable work will be of great benefit to students, researchers and practitioners interested in computer networks, parallel processing and reliability engineering. The text is also essential reading for course modules on interconnection network design and reliability.
Download or read book Proceedings of Fourth International Conference on Communication Computing and Electronics Systems written by V. Bindhu and published by Springer Nature. This book was released on 2023-03-14 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes high-quality research papers presented at the Fourth International Conference on Communication, Computing and Electronics Systems (ICCCES 2022), held at the PPG Institute of Technology, Coimbatore, India, on September 15–16, 2022. The book focuses mainly on the research trends in cloud computing, mobile computing, artificial intelligence and advanced electronics systems. The topics covered are automation, VLSI, embedded systems, optical communication, RF communication, microwave engineering, artificial intelligence, deep learning, pattern recognition, communication networks, Internet of things, cyber-physical systems and healthcare informatics.
