Download or read book Control Problems in Robotics written by Antonio Bicchi and published by Springer Science & Business Media. This book was released on 2007-07-12 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ?eld of robotics continues to ?ourish and develop. In common with general scienti?c investigation, new ideas and implementations emerge quite spontaneously and these are discussed, used, discarded or subsumed at c- ferences, in the reference journals, as well as through the Internet. After a little more maturity has been acquired by the new concepts, then archival publication as a scienti?c or engineering monograph may occur. The goal of the Springer Tracts in Advanced Robotics is to publish new developments and advances in the ?elds of robotics research – rapidly and informally but with a high quality. It is hoped that prospective authors will welcome the opportunity to publish a structured presentation of some of the emerging robotics methodologies and technologies. The edited volume by Antonio Bicchi, Henrik Christensen and Domenico Prattichizzo is the outcome of the second edition of a workshop jointly sponsored by the IEEE Control Systems Society and the IEEE Robotics and Automation Society. Noticeably, the previous volume was published in the Springer Lecture Notes on Control and Information Sciences. The authors are recognised as leading scholars internationally. A n- ber of challenging control problems on the forefront of today’s research in robotics and automation are covered, with special emphasis on vision, sensory-feedback control, human-centered robotics, manipulation, planning, ?exible and cooperative robots, assembly systems.
Download or read book Robot Manipulators written by Etienne Dombre and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent research results on modeling and control of robot manipulators. Chapter 1 gives unified tools to derive direct and inverse geometric, kinematic and dynamic models of serial robots and addresses the issue of identification of the geometric and dynamic parameters of these models. Chapter 2 describes the main features of serial robots, the different architectures and the methods used to obtain direct and inverse geometric, kinematic and dynamic models, paying special attention to singularity analysis. Chapter 3 introduces global and local tools for performance analysis of serial robots. Chapter 4 presents an original optimization technique for point-to-point trajectory generation accounting for robot dynamics. Chapter 5 presents standard control techniques in the joint space and task space for free motion (PID, computed torque, adaptive dynamic control and variable structure control) and constrained motion (compliant force-position control). In Chapter 6, the concept of vision-based control is developed and Chapter 7 is devoted to specific issue of robots with flexible links. Efficient recursive Newton-Euler algorithms for both inverse and direct modeling are presented, as well as control methods ensuring position setting and vibration damping.
Download or read book Embedded Visual System and Its Applications on Robots written by De Xu and published by Bentham Science Publishers. This book was released on 2010 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Embedded vision systems such as smart cameras have been rapidly developed recently. Vision systems have become smaller and lighter, but their performance has improved. The algorithms in embedded vision systems have their specifications limited by frequency of CPU, memory size, and architecture. The goal of this e-book is to provide a an advanced reference work for engineers, researchers and scholars in the field of robotics, machine vision, and automation and to facilitate the exchange of their ideas, experiences and views on embedded vision system models. The effectiveness for all methods is emphasized in a practical sense for systems presented in this e-book.
Download or read book Visual Control of Robots written by Peter I. Corke and published by Taylor & Francis Group. This book was released on 1996 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurement Science written by Komyo Kariya and published by IOS Press. This book was released on 2000 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control in Robotics and Automation written by Bhaskar Kumar Ghosh and published by Academic Press. This book was released on 1999 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control in Robotics and Automation has been written to meet the rapidly growing need for sensor-based integration to solve problems in the control and planning of robotic systems. Applications of these control methods range from assembly tasks in industrial automation to material handling in hazardous environments and servicing tasks in space. Many advances in a wide range of new applications in robotics and automation will depend on methods presented in this book, including robot-assisted surgery, space exploration, and micro-fabrication.
Download or read book Sensor Fusion and Decentralized Control in Robotic Systems written by and published by . This book was released on 1998 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vision Based Identification and Force Control of Industrial Robots written by Abdullah Aamir Hayat and published by Springer Nature. This book was released on 2022-03-21 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on end-to-end robotic applications using vision and control algorithms, exposing its readers to design innovative solutions towards sensors-guided robotic bin-picking and assembly in an unstructured environment. The use of sensor fusion is demonstrated through a bin-picking task of texture-less cylindrical objects. The system identification techniques are also discussed for obtaining precise kinematic and dynamic parameters of an industrial robot which facilitates the control schemes to perform pick-and-place tasks autonomously without any interference from the user. The uniqueness of this book lies in a judicious balance between theory and technology within the context of industrial application. Therefore, it will be valuable to researchers working in the area of vision- and force control- based robotics, as well as beginners in this inter-disciplinary area, as it deals with the basics and technologically advanced research strategies.
Download or read book Intelligent Robotics and Applications written by Huayong Yang and published by Springer Nature. This book was released on 2023-10-09 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 9-volume set LNAI 14267-14275 constitutes the proceedings of the 16th International Conference on Intelligent Robotics and Applications, ICIRA 2023, which took place in Hangzhou, China, during July 5–7, 2023. The 413 papers included in these proceedings were carefully reviewed and selected from 630 submissions. They were organized in topical sections as follows: Part I: Human-Centric Technologies for Seamless Human-Robot Collaboration; Multimodal Collaborative Perception and Fusion; Intelligent Robot Perception in Unknown Environments; Vision-Based Human Robot Interaction and Application. Part II: Vision-Based Human Robot Interaction and Application; Reliable AI on Machine Human Reactions; Wearable Sensors and Robots; Wearable Robots for Assistance, Augmentation and Rehabilitation of Human Movements; Perception and Manipulation of Dexterous Hand for Humanoid Robot. Part III: Perception and Manipulation of Dexterous Hand for Humanoid Robot; Medical Imaging for Biomedical Robotics; Advanced Underwater Robot Technologies; Innovative Design and Performance Evaluation of Robot Mechanisms; Evaluation of Wearable Robots for Assistance and Rehabilitation; 3D Printing Soft Robots. Part IV: 3D Printing Soft Robots; Dielectric Elastomer Actuators for Soft Robotics; Human-like Locomotion and Manipulation; Pattern Recognition and Machine Learning for Smart Robots. Part V: Pattern Recognition and Machine Learning for Smart Robots; Robotic Tactile Sensation, Perception, and Applications; Advanced Sensing and Control Technology for Human-Robot Interaction; Knowledge-Based Robot Decision-Making and Manipulation; Design and Control of Legged Robots. Part VI: Design and Control of Legged Robots; Robots in Tunnelling and Underground Space; Robotic Machining of Complex Components; Clinically Oriented Design in Robotic Surgery and Rehabilitation; Visual and Visual-Tactile Perception for Robotics. Part VII: Visual and Visual-Tactile Perception for Robotics; Perception, Interaction, and Control of Wearable Robots; Marine Robotics and Applications; Multi-Robot Systems for Real World Applications; Physical and Neurological Human-Robot Interaction. Part VIII: Physical and Neurological Human-Robot Interaction; Advanced Motion Control Technologies for Mobile Robots; Intelligent Inspection Robotics; Robotics in Sustainable Manufacturing for Carbon Neutrality; Innovative Design and Performance Evaluation of Robot Mechanisms. Part IX: Innovative Design and Performance Evaluation of Robot Mechanisms; Cutting-Edge Research in Robotics.
Download or read book Field and Service Robotics written by Alexander Zelinsky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Joe Engelberger, the pioneer of the robotics industry, wrote in his 1989 book Robotics in Service that the inspiration to write his book came as a reaction to an industry-sponsored forecast study of robot applications, which predicted that in 1995 applications of robotics outside factories - the traditional domain of industrial robots - would amount to less than 1% of total sales. Engelberger believed that this forecast was very wrong, and instead predicted that the non-industrial class of robot applications would become the largest class. Engelbergers prediction has yet to come to pass. However, he did correctly foresee the growth in non-traditional applications of robots. Robots are now beginning to march from the factories and into field and service applications. This book presents a selection of papers from the first major international conference dedicated to field and service applications of robotics. This selection includes papers from the leading research laboratories in the world together with papers from companies that are building and selling new and innovative robotic technology. It describes interesting aspects of robots in the field ranging from mining, agriculture, construction, cargo handling, subsea operations, removal of landmines, to terrestrial exploration. It also covers a diverse range of service applications, such as cleaning, propagating plants and aiding the elderly and handicapped, and gives considerable attention to the technology required to realise robust, reliable and safe robots.
Download or read book Robotics Vision and Control written by Peter Corke and published by Springer. This book was released on 2011-09-05 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author has maintained two open-source MATLAB Toolboxes for more than 10 years: one for robotics and one for vision. The key strength of the Toolboxes provide a set of tools that allow the user to work with real problems, not trivial examples. For the student the book makes the algorithms accessible, the Toolbox code can be read to gain understanding, and the examples illustrate how it can be used —instant gratification in just a couple of lines of MATLAB code. The code can also be the starting point for new work, for researchers or students, by writing programs based on Toolbox functions, or modifying the Toolbox code itself. The purpose of this book is to expand on the tutorial material provided with the toolboxes, add many more examples, and to weave this into a narrative that covers robotics and computer vision separately and together. The author shows how complex problems can be decomposed and solved using just a few simple lines of code, and hopefully to inspire up and coming researchers. The topics covered are guided by the real problems observed over many years as a practitioner of both robotics and computer vision. It is written in a light but informative style, it is easy to read and absorb, and includes a lot of Matlab examples and figures. The book is a real walk through the fundamentals of robot kinematics, dynamics and joint level control, then camera models, image processing, feature extraction and epipolar geometry, and bring it all together in a visual servo system. Additional material is provided at http://www.petercorke.com/RVC
Download or read book Visual Servoing via Advanced Numerical Methods written by Graziano Chesi and published by Springer Science & Business Media. This book was released on 2010-03-15 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robots able to imitate human beings have been at the core of stories of science?ctionaswellasdreamsofinventorsforalongtime.Amongthe various skills that Mother Nature has provided us with and that often go forgotten, the ability of sight is certainly one of the most important. Perhaps inspired by tales of Isaac Asimov, comics and cartoons, and surely helped by the progress of electronics in recent decades, researchers have progressively made the dream of creating robots able to move and operate by exploiting arti?cial vision a concrete reality. Technically speaking, we would say that these robots position themselves and their end-e?ectors by using the view provided by some arti?cial eyes as feedback information. Indeed, the arti?cial eyes are visual sensors such as cameras that have the function to acquire an image of the environment. Such an image describes if and how the robot is moving toward the goal and hence constitutes feedback information. This procedure is known in robotics with the term visual servoing, and it is nothing else than an imitation of the intrinsic mechanism that allows human beings to realize daily tasks such as reaching the door of the house or grasping a cup of co?ee.
Download or read book Fundamentals of Manipulator Calibration written by Benjamin W. Mooring and published by Wiley-Interscience. This book was released on 1991-03-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the details of the calibration process step-by-step, covering systems modeling, measurement, identification, correction and performance evaluation. Calibration techniques are presented with an explanation of how they interact with each other as they are modified. Shows the reader how to determine if, in fact, a robot problem is a calibration problem and then how to analyze it.
Download or read book Proceedings of 2020 Chinese Intelligent Systems Conference written by Yingmin Jia and published by Springer Nature. This book was released on 2020-09-23 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on new theoretical results and techniques in the field of intelligent systems and control. It provides in-depth studies on a number of major topics such as Multi-Agent Systems, Complex Networks, Intelligent Robots, Complex System Theory and Swarm Behavior, Event-Triggered Control and Data-Driven Control, Robust and Adaptive Control, Big Data and Brain Science, Process Control, Intelligent Sensor and Detection Technology, Deep learning and Learning Control Guidance, Navigation and Control of Flight Vehicles and so on. Given its scope, the book will benefit all researchers, engineers, and graduate students who want to learn about cutting-edge advances in intelligent systems, intelligent control, and artificial intelligence.
Download or read book Multi View Geometry Based Visual Perception and Control of Robotic Systems written by Jian Chen and published by CRC Press. This book was released on 2018-06-14 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes visual perception and control methods for robotic systems that need to interact with the environment. Multiple view geometry is utilized to extract low-dimensional geometric information from abundant and high-dimensional image information, making it convenient to develop general solutions for robot perception and control tasks. In this book, multiple view geometry is used for geometric modeling and scaled pose estimation. Then Lyapunov methods are applied to design stabilizing control laws in the presence of model uncertainties and multiple constraints.
Download or read book Sensing Data Managing and Control Technologies for Agricultural Systems written by Shaochun Ma and published by Springer Nature. This book was released on 2022-06-06 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agricultural automation is the emerging technologies which heavily rely on computer-integrated management and advanced control systems. The tedious farming tasks had been taken over by agricultural machines in last century, in new millennium, computer-aided systems, automation, and robotics has been applied to precisely manage agricultural production system. With agricultural automation technologies, sustainable agriculture is being developed based on efficient use of land, increased conservation of water, fertilizer and energy resources. The agricultural automation technologies refer to related areas in sensing & perception, reasoning & learning, data communication, and task planning & execution. Since the literature on this diverse subject is widely scattered, it is necessary to review current status and capture the future challenges through a comprehensive monograph. In this book we focus on agricultural automation and provide critical reviews of advanced control technologies, their merits and limitations, application areas and research opportunities for further development. This collection thus serves as an authoritative treatise that can help researchers, engineers, educators, and students in the field of sensing, control, and automation technologies for production agriculture.
