Download or read book The Virial Coefficients of Gases written by John H. Dymond and published by Clarendon Press. This book was released on 1969 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Virial Coefficients of Pure Gases and Mixtures written by J.D. Dymond and published by Springer. This book was released on 2003-03-24 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This critical compilation of virial coefficients of pure gases was prepared from the virial coefficient database at the Thermodynamics Research Center, formerly at Texas A&M University, College Station, Texas and now located at the National Institute of Standards and Technology, Boulder, Colorado. The virial coefficient data in this compilation will be of interest to the theoretical chemist as it includes the many sets of accurate gas imperfection data which have been determined over the past twenty years by improved methods of gas density determination, by isochoric Burnett coupling methods and from speed of sound measurements, as well as by the more traditional techniques. The needs of the industrial chemist are met by these more reliable data and also the increased number of compounds for which data are now available.
Download or read book The Virial Coefficients of Pure Gases and Mixtures written by John H. Dymond and published by Oxford University Press, USA. This book was released on 1980 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Virial Coefficients of Pure Gases and Mixtures written by John H. Dymond and published by Oxford University Press, USA. This book was released on 1980 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Thermodynamics of Fluids written by A. R. H. Goodwin and published by Royal Society of Chemistry. This book was released on 2010 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published under the asspices of both IUPAC and its affiliated body, the International Association of Chemical Thermodynamics (IACT), this book will serve as a guide to scientists or technicians who use equations of state for fluids. Concentrating on the application of theory, the practical use of each type of equation is discussed and the strengths and weaknesses of each are addressed. It includes material on the equations of state for chemically reacting and non-equilibrium fluids which have undergone significant developments and brings up to date the equations of state for fluids and fluid mixtures. Applied Thermodynamics of Fluids addresses the need of practitioners within academia, government and industry by assembling an international team of distinguished experts to provide each chapter. The topics presented in the book are important to the energy business, particularly the hydroncarbon economy and the development of new power sources and are also significant for the application of liquid crystals and ionic liquids to commericial products. This reference will be useful for post graduate researchers in the fields of chemical engineering, mechanical engineering, chemistry and physics.
Download or read book Measurement of the Thermodynamic Properties of Single Phases written by Anthony Goodwin and published by Elsevier. This book was released on 2003-07-03 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title is a revision of Experimental Thermodynamics Volume II, published in 1975, reflecting the significant technological developments and new methods introduced into the study of measurement of thermodynamic quantities.The editors of this volume were assigned the task of assembling an international team of distinguished experimentalists, to describe the current state of development of the techniques of measurement of the thermodynamic quantities of single phases. The resulting volume admirably fulfils this brief and contains a valuable summary of a large variety of experimental techniques applicable over a wide range of thermodynamic states with an emphasis on the precision and accuracy of the results obtained. Those interested in the art of measurements, and in particular engaged in the measurement of thermodynamic properties, will find this material invaluable for the guidance it provides towards the development of new and more accurate techniques.·Provides detailed descriptions of experimental chemical thermodynamic methods·Strong practical bias and includes both detailed working equations and figures for the experimental methods·Most comprehensive text in this field since the publication of Experimental Thermodynamics II
Download or read book Chemical Thermodynamics written by Maxwell Len McGlashan and published by Royal Society of Chemistry. This book was released on 1978 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This product is not available separately, it is only sold as part of a set. There are 750 products in the set and these are all sold as one entity. Specialist Periodical Reports provide systematic and detailed review coverage of progress in the major areas of chemical research. Written by experts in their specialist fields the series creates a unique service for the active research chemist, supplying regular critical in-depth accounts of progress in particular areas of chemistry. For over 80 years the Royal Society of Chemistry and its predecessor, the Chemical Society, have been publishing reports charting developments in chemistry, which originally took the form of Annual Reports. However, by 1967 the whole spectrum of chemistry could no longer be contained within one volume and the series Specialist Periodical Reports was born. The Annual Reports themselves still existed but were divided into two, and subsequently three, volumes covering Inorganic, Organic and Physical Chemistry. For more general coverage of the highlights in chemistry they remain a 'must'. Since that time the SPR series has altered according to the fluctuating degree of activity in various fields of chemistry. Some titles have remained unchanged, while others have altered their emphasis along with their titles; some have been combined under a new name whereas others have had to be discontinued.
Download or read book Commonly Asked Questions in Thermodynamics written by Marc J. Assael and published by CRC Press. This book was released on 2022-08-05 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: CRC Press is pleased to introduce the new edition of Commonly Asked Questions in Thermodynamics, an indispensable resource for those in modern science and engineering disciplines from molecular science, engineering and biotechnology to astrophysics. Fully updated throughout, this edition features two new chapters focused on energy utilization and biological systems. This edition begins by setting out the fundamentals of thermodynamics, including its basic laws and overarching principles. It provides explanations of those principles in an organized manner, using questions that arise frequently from undergraduates in the classroom as the stimulus. These early chapters explore the language of thermodynamics; the first and second laws; statistical mechanical theory; measurement of thermodynamic quantities and their relationships; phase behavior in single and multicomponent systems; electrochemistry; and chemical and biochemical reaction equilibria. The later chapters explore applications of these fundamentals to a diverse set of subjects including power generation (with and without fossil fuels) for transport, industrial and domestic use; heating; decarbonization technologies; energy storage; refrigeration; environmental pollution; and biotechnology. Data sources for the properties needed to complete thermodynamic evaluations of many processes are included. The text is designed for readers to dip into to find an answer to a specific question where thermodynamics can provide some, if not all, of the answers, whether in the context of an undergraduate course or not. Thus its readership extends beyond conventional technical undergraduates to practicing engineers and also to the interested lay person who seeks to understand the discourse that surrounds the choice of particular technological solutions to current and future energy and material production problems.
Download or read book The Virial Equation of State written by Edward Allen Mason and published by Pergamon. This book was released on 1969 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Properties of Gases and Liquids 5E written by Bruce E. Poling and published by McGraw Hill Professional. This book was released on 2000-11-27 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Must-have reference for processes involving liquids, gases, and mixtures Reap the time-saving, mistake-avoiding benefits enjoyed by thousands of chemical and process design engineers, research scientists, and educators. Properties of Gases and Liquids, Fifth Edition, is an all-inclusive, critical survey of the most reliable estimating methods in use today --now completely rewritten and reorganized by Bruce Poling, John Prausnitz, and John O’Connell to reflect every late-breaking development. You get on-the-spot information for estimating both physical and thermodynamic properties in the absence of experimental data with this property data bank of 600+ compound constants. Bridge the gap between theory and practice with this trusted, irreplaceable, and expert-authored expert guide -- the only book that includes a critical analysis of existing methods as well as hands-on practical recommendations. Areas covered include pure component constants; thermodynamic properties of ideal gases, pure components and mixtures; pressure-volume-temperature relationships; vapor pressures and enthalpies of vaporization of pure fluids; fluid phase equilibria in multicomponent systems; viscosity; thermal conductivity;diffusion coefficients; and surface tension.
Download or read book CRC Handbook of Thermophysical and Thermochemical Data written by David R. Lide and published by CRC Press. This book was released on 2020-09-24 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CRC Handbook of Thermophysical and Thermochemical Data is an interactive software and handbook package that provides an invaluable source of reliable data embracing a wide range of properties of chemical substances, mixtures, and reacting systems. Use the handbook and software together to quickly, and easily generate property values at any desired temperature, pressure, or mixture composition.
Download or read book Lectures in Classical Thermodynamics with an Introduction to Statistical Mechanics written by Daniel Blankschtein and published by Springer Nature. This book was released on 2021-03-15 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook facilitates students’ ability to apply fundamental principles and concepts in classical thermodynamics to solve challenging problems relevant to industry and everyday life. It also introduces the reader to the fundamentals of statistical mechanics, including understanding how the microscopic properties of atoms and molecules, and their associated intermolecular interactions, can be accounted for to calculate various average properties of macroscopic systems. The author emphasizes application of the fundamental principles outlined above to the calculation of a variety of thermodynamic properties, to the estimation of conversion efficiencies for work production by heat interactions, and to the solution of practical thermodynamic problems related to the behavior of non-ideal pure fluids and fluid mixtures, including phase equilibria and chemical reaction equilibria. The book contains detailed solutions to many challenging sample problems in classical thermodynamics and statistical mechanics that will help the reader crystallize the material taught. Class-tested and perfected over 30 years of use by nine-time Best Teaching Award recipient Professor Daniel Blankschtein of the Department of Chemical Engineering at MIT, the book is ideal for students of Chemical and Mechanical Engineering, Chemistry, and Materials Science, who will benefit greatly from in-depth discussions and pedagogical explanations of key concepts. Distills critical concepts, methods, and applications from leading full-length textbooks, along with the author’s own deep understanding of the material taught, into a concise yet rigorous graduate and advanced undergraduate text; Enriches the standard curriculum with succinct, problem-based learning strategies derived from the content of 50 lectures given over the years in the Department of Chemical Engineering at MIT; Reinforces concepts covered with detailed solutions to illuminating and challenging homework problems.
Download or read book Chemical Thermodynamics for Process Simulation written by Jürgen Gmehling and published by John Wiley & Sons. This book was released on 2019-06-10 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only textbook that applies thermodynamics to real-world process engineering problems This must-read for advanced students and professionals alike is the first book to demonstrate how chemical thermodynamics work in the real world by applying them to actual engineering examples. It also discusses the advantages and disadvantages of the particular models and procedures, and explains the most important models that are applied in process industry. All the topics are illustrated with examples that are closely related to practical process simulation problems. At the end of each chapter, additional calculation examples are given to enable readers to extend their comprehension. Chemical Thermodynamics for Process Simulation instructs on the behavior of fluids for pure fluids, describing the main types of equations of state and their abilities. It discusses the various quantities of interest in process simulation, their correlation, and prediction in detail. Chapters look at the important terms for the description of the thermodynamics of mixtures; the most important models and routes for phase equilibrium calculation; models which are applicable to a wide variety of non-electrolyte systems; membrane processes; polymer thermodynamics; enthalpy of reaction; chemical equilibria, and more. -Explains thermodynamic fundamentals used in process simulation with solved examples -Includes new chapters about modern measurement techniques, retrograde condensation, and simultaneous description of chemical equilibrium -Comprises numerous solved examples, which simplify the understanding of the often complex calculation procedures, and discusses advantages and disadvantages of models and procedures -Includes estimation methods for thermophysical properties and phase equilibria thermodynamics of alternative separation processes -Supplemented with MathCAD-sheets and DDBST programs for readers to reproduce the examples Chemical Thermodynamics for Process Simulation is an ideal resource for those working in the fields of process development, process synthesis, or process optimization, and an excellent book for students in the engineering sciences.
Download or read book Thermodynamics of Chemical Systems written by Scott Emerson Wood and published by Cambridge University Press. This book was released on 1990-03-30 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to develop the concepts and relations pertinent to the solution of many thermodynamic problems encountered in multi-phase, multi-component systems. In doing so, it emphasizes a comprehension and development of general expressions for solving such problems, rather than ready-made equations for particular applications. Throughout the book, the methods of Gibbs are used with emphasis on the chemical potential.
Download or read book Volume Properties written by Emmerich Wilhelm and published by Royal Society of Chemistry. This book was released on 2014-12-17 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volumetric properties play an important role in research at the interface of physical chemistry and chemical engineering, but keeping up with the latest developments in the field demands a broad view of the literature. Presenting a collection of concise, focused chapters, this book offers a comprehensive guide to the latest developments in the field and a starting point for more detailed research. The chapters are written by acknowledged experts, covering theory, experimental methods, techniques, and results on all types of liquids and vapours. The editors work at the forefront of thermodynamics in mixtures and solutions and have brought together contributions from all areas related to volume properties, offering a synergy of ideas across the field. Graduates, researchers and anyone working in the field of volumes will find this book to be their key reference.
Download or read book Equations of State for Fluids and Fluid Mixtures written by J.V. Sengers and published by Elsevier. This book was released on 2000-10-30 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been prepared under the auspices of Commission I.2 on Thermodynamics of the International Union of Pure and Applied Chemistry (IUPAC). The authors of the 18 chapters are all recognized experts in the field. The book gives an up-to-date presentation of equations of state for fluids and fluid mixtures. All principal approaches for developing equations of state are covered. The theoretical basis and practical use of each type of equation is discussed and the strength and weaknesses of each is addressed. Topics addressed include the virial equation of state, cubic equations and generalized van der Waals equations, perturbation theory, integral equations, corresponding stated and mixing rules. Special attention is also devoted to associating fluids, polydisperse fluids, polymer systems, self-assembled systems, ionic fluids and fluids near critical points.
Download or read book The Corresponding States Principle and its Practice written by Hong Wei Xiang and published by Elsevier. This book was released on 2005-07-26 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: The corresponding-states principle helps the understanding and calculating of thermodynamic, transport, and surface properties of substances in various states, required by our modern lifestyle. The Corresponding-States Principle and its Practice: Thermodynamic, Transport and Surface Properties of Fluids describes the origins and applications of the principle from a universal point of view with comparisons to experimental data where possible. It uses the universal theory to explain present theories. Emphasis is on the properties of pure systems, and the corresponding-states theory can also be extended to mixtures, which are treated as pure systems. Furthermore, the author discusses current progress, and shows technicians how to derive practical equations from molecular modeling. The Corresponding-States Principle and its Practice: Thermodynamic, Transport and Surface Properties of Fluids is the ideal handbook for those in chemical science and engineering related to energy, environment, natural gas, and petroleum.* Describes the origins and applications from a universal viewpoint* Includes experimental data for comparisons * Suitable for researchers, applied engineers, and those interested in the corresponding states theory
