Download or read book Vinyl Chloride Production from Ethane and Chlorine Cost Analysis VCM E21A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Vinyl Chloride production directly from ethane and chlorine The process examined is similar to that developed by European Vinyls Corporation, now owned by INEOS. This process is still in its early development stage, but it has already been tested on a pilot scale plant. This report was developed based essentially on the following reference(s): Keywords: Chloroethene, 1,2-Dichloroethane, European Vinyls Corporation, EVC, INEOS, Ethane-To-VCM
Download or read book Vinyl Chloride Production from Ethane and Chlorine Cost Analysis VCM E21A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Vinyl Chloride production directly from ethane and chlorine. The process examined is similar to that developed by European Vinyls Corporation, now owned by INEOS. This process is still in its early development stage, but it has already been tested on a pilot scale plant. This report was developed based essentially on the following reference(s): Keywords: Chloroethene, 1,2-Dichloroethane, European Vinyls Corporation, EVC, INEOS, Ethane-To-VCM
Download or read book Vinyl Chloride Production from Ethylene and Chlorine Cost Analysis VCM E41A written by Intratec and published by Intratec Solutions. This book was released on 2016-03-01 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Vinyl Chloride production from ethylene and chlorine via a balanced process. This typical balanced process combines two ethylene dichloride (EDC) production routes, direct chlorination and oxychlorination, for the production of Vinyl Chloride. By doing so, hydrogen chloride byproduct, produced in the thermal cracking unit, is used as raw material in the oxychlorination unit for additional production of EDC from ethylene. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): (1) US Patent 7767869, issued to Vinnolit in 2010; (2) US Patent 6235953, issued to Vinnolit in 2001 Keywords: Chloroethene, 1,2-Dichloroethane, Hydrochlorination, INEOS, Vinnolit, Balanced Process
Download or read book Vinyl Chloride Production from Ethylene and Chlorine Cost Analysis VCM E42A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Vinyl Chloride production from ethylene and chlorine. The process examined combines: (1) EDC production from ethylene and chlorine via direct chlorination, and (2) Vinyl Chloride production via thermal cracking of EDC. Besides Vinyl Chloride, the process also generates hydrogen chloride as by-product. This report was developed based essentially on the following reference(s): (1) US Patent 7767869, issued to Vinnolit in 2010 (2) US Patent 6235953, issued to Vinnolit in 2001 Keywords: Chloroethene, 1,2-Dichloroethane, Vinnolit, OxyVinyls, Thermal Cracking, Direct Chlorination
Download or read book Vinyl Chloride Production from Ethylene Dichloride Cost Analysis VCM E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Vinyl Chloride production from ethylene dichloride (EDC). The process examined is a typical thermal cracking process. In this process, ethylene dichloride is thermally cracked in pyrolysis furnaces to produce Vinyl Chloride. Hydrogen chloride is generated as a by-product in the process. This report was developed based essentially on the following reference(s): (1) "Chlorinated Hydrocarbons", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition (2) US Patent 7767869, issued to Vinnolit in 2010 Keywords: Chloroethene, 1,2-Dichloroethane, Vinnolit, OxyVinyls, Thermal Cracking
Download or read book Vinyl Chloride Production from Ethylene and EDC Cost Analysis VCM E51A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Vinyl Chloride production from ethylene and ethylene dichloride (EDC). The process examined combines: (1) EDC production from ethylene via oxychlorination, and (2) Vinyl Chloride production via thermal cracking of EDC. The EDC cracking generates hydrogen chloride (HCl) used as raw material in the oxychlorination. The HCl requirement is balanced by purchasing additional EDC from the market. This report was developed based essentially on the following reference(s): Keywords: Chloroethene, 1,2-Dichloroethane, Vinnolit, OxyVinyls, Thermal Cracking, Oxychlorination
Download or read book Vinyl Chloride Production from Acetylene Cost Analysis VCM E31A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Vinyl Chloride production from acetylene and hydrochloric acid. The process examined is a typical acetylene hydrochlorination process. In this process, anhydrous hydrogen chloride is reacted in vapor phase with acetylene over a mercuric chloride catalyst producing Vinyl Chloride. This report was developed based essentially on the following reference(s): (1) "Chlorinated Hydrocarbons", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition (2) "Vinyl Chloride", Acetylene-Based Chemicals from Coal and Other Natural Resources Keywords: Chloroethene, 1,2-Dichloroethane, Hydrochlorination
Download or read book Chlorine Production from Hydrogen Chloride Cost Analysis Chlorine E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of secondary Chlorine production from hydrogen chloride. The process examined is similar to the Kel-Chlor process, proprietary technology based on the Deacon process. In this process, anhydrous hydrogen chloride is subjected to an oxidation reaction in the presence of catalysts producing Chlorine. This report was developed based essentially on the following reference(s): Keywords: Secondary chlorine, hydrogen chloride waste treatment, HCl, cholrine recovery
Download or read book Life Cycle Analysis of Vinyl Chloride Monomer VCM Plant written by Rozita Yusoff and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basic Principles and Calculations in Chemical Engineering written by David Mautner Himmelblau and published by FT Press. This book was released on 2012 with total page 975 pages. Available in PDF, EPUB and Kindle. Book excerpt: Best-selling introductory chemical engineering book - now updated with far more coverage of biotech, nanotech, and green engineering Thoroughly covers material balances, gases, liquids, and energy balances. Contains new biotech and bioengineering problems throughout.
Download or read book Green Chemistry written by Paul T. Anastas and published by Oxford University Press, USA. This book was released on 1998 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: The history of environmental protection has dealt with hazardous substances by cleaning them up or treating them after the substances have formed. Green Chemistry, however, designs products and processes so that no hazardous materials are used or made in the first place. With applications fromplastic to paints, from automobiles to pharmaceuticals, Green Chemistry is revolutionising science and industry and its impact on the environment.
Download or read book Encyclopaedia of Scientific Units Weights and Measures written by François Cardarelli and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 869 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mankind has a fascination with measurement. Down the centuries we have produced a plethora of incompatible and duplicatory systems for measuring everything from the width of an Egyptian pyramid to the concentration of radioactivity near a nuclear reactor and the value of the fine structure constant. With the introduction first of the metric system and of its successor the Système International d'Unités (SI), the scientific community has established a standard method of measurement based on only seven core units. The Encyclopaedia of Scientific Units, Weights and Measures converts the huge variety of units from all over the world in every period of recorded history into units of the SI. Featuring: - An A - Z of conversion tables for over 10,000 units of measurements. - Tables of the fundamental constants of nature with their units. - Listings of professional societies, and national standardization bodies for easy reference. - An extensive bibliography detailing further reading on the multifarious aspects of measurement and its units. This huge work is simply a "must have" for any reference library frequented by scientists of any discipline or by those with historical interests in units of measurement such as archaeologists.
Download or read book Scientific Unit Conversion written by Francois Cardarelli and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanded, revised and updated here, this detailed guide is truly unique, giving accurate metric equivalents and conversion factors for no fewer than 10,000 scientific units with detailed descriptions of over 2,000. It covers the whole spectrum of science, technology and medicine, and deals with US, British, conventional metric, historic and SI units. The pocket-sized format and slot-in user guide bookmark makes it handy and user-friendly, a great time-saver, and a perfect addition to any research department, engineers , scientists or students library.
Download or read book Molecular Thermodynamics of Fluid Phase Equilibria written by John M. Prausnitz and published by Pearson Education. This book was released on 1998-10-22 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic guide to mixtures, completely updated with new models, theories, examples, and data. Efficient separation operations and many other chemical processes depend upon a thorough understanding of the properties of gaseous and liquid mixtures. Molecular Thermodynamics of Fluid-Phase Equilibria, Third Edition is a systematic, practical guide to interpreting, correlating, and predicting thermodynamic properties used in mixture-related phase-equilibrium calculations. Completely updated, this edition reflects the growing maturity of techniques grounded in applied statistical thermodynamics and molecular simulation, while relying on classical thermodynamics, molecular physics, and physical chemistry wherever these fields offer superior solutions. Detailed new coverage includes: Techniques for improving separation processes and making them more environmentally friendly. Theoretical concepts enabling the description and interpretation of solution properties. New models, notably the lattice-fluid and statistical associated-fluid theories. Polymer solutions, including gas-polymer equilibria, polymer blends, membranes, and gels. Electrolyte solutions, including semi-empirical models for solutions containing salts or volatile electrolytes. Coverage also includes: fundamentals of classical thermodynamics of phase equilibria; thermodynamic properties from volumetric data; intermolecular forces; fugacities in gas and liquid mixtures; solubilities of gases and solids in liquids; high-pressure phase equilibria; virial coefficients for quantum gases; and much more. Throughout, Molecular Thermodynamics of Fluid-Phase Equilibria strikes a perfect balance between empirical techniques and theory, and is replete with useful examples and experimental data. More than ever, it is the essential resource for engineers, chemists, and other professionals working with mixtures and related processes.
Download or read book Electrochemical Engineering Principles written by Geoffrey Prentice and published by . This book was released on 1991 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Thermal Analysis of Zirconium Tin Alloys written by L. L. Wyman and published by . This book was released on 1952 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Process Safety written by Daniel A. Crowl and published by Pearson Education. This book was released on 2001-10-16 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combines academic theory with practical industry experience Updated to include the latest regulations and references Covers hazard identification, risk assessment, and inherent safety Case studies and problem sets enhance learning Long-awaited revision of the industry best seller. This fully revised second edition of Chemical Process Safety: Fundamentals with Applications combines rigorous academic methods with real-life industrial experience to create a unique resource for students and professionals alike. The primary focus on technical fundamentals of chemical process safety provides a solid groundwork for understanding, with full coverage of both prevention and mitigation measures. Subjects include: Toxicology and industrial hygiene Vapor and liquid releases and dispersion modeling Flammability characterization Relief and explosion venting In addition to an overview of government regulations, the book introduces the resources of the AICHE Center for Chemical Process Safety library. Guidelines are offered for hazard identification and risk assessment. The book concludes with case histories drawn directly from the authors' experience in the field. A perfect reference for industry professionals, Chemical Process Safety: Fundamentals with Applications, Second Edition is also ideal for teaching at the graduate and senior undergraduate levels. Each chapter includes 30 problems, and a solutions manual is now available for instructors.
