Download or read book Advances in the Analysis and Design of Marine Structures written by J. W. Ringsberg and published by CRC Press. This book was released on 2023-04-14 with total page 921 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in the Analysis and Design of Marine Structures is a collection of papers presented at MARSTRUCT 2023, the 9th International Conference on Marine Structures, held in Gothenburg, Sweden, 3-5 April 2023. The conference was organised by the Division of Marine Technology, Department of Mechanics and Maritime Sciences at Chalmers University of Technology, in Gothenburg, Sweden. The MARSTRUCT Conference series deals with Ship and Offshore Structures, addressing topics in the fields of: Methods and tools for loads and load effects Methods and tools for strength assessment Experimental analysis of structures Materials and fabrication of structures Methods and tools for structural design and optimization Structural reliability, safety, and environmental protection The MARSTRUCT conferences series of started in Glasgow, UK in 2007, the second event of the series took place in Lisbon, Portugal in March 2009, the third in Hamburg, Germany in March 2011, the fourth in Espoo, Finland in March 2013, the fifth in Southampton, UK in March 2015, the sixth in Lisbon, Portugal in May 2017, the seventh in Dubrovnik, Croatia in May 2019, and the eighth event in Trondheim, Norway in June 2021. Advances in the Analysis and Design of Marine Structures is essential reading for academics, engineers and all professionals involved in the design of marine and offshore structures. The Proceedings in Marine Technology and Ocean Engineering series is devoted to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of ‘Marine Technology and Ocean Engineering’. The Series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) Conferences, the Marine Structures (MARSTRUCT) Conferences, the Renewable Energies Offshore (RENEW) Conferences and the Maritime Technology (MARTECH) Conferences. The ‘Marine Technology and Ocean Engineering’ series is also open to new conferences that cover topics on the sustainable exploration and exploitation of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and its resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.
Download or read book Structure Borne Sound written by L. Cremer and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since structure-borne sound plays an important role in noise control, material testing and machine diagnosis, the relevant properties of the most important elements of a construction (plates, beams and shells) are investigated. Measurement techniques, equations of motion, formulas for wave speeds, resonance frequencies, impedances, transmission coefficients etc. are given. The different damping mechanisms and the radiation properties are treated. The statistical energy analysis (SEA) is also presented. This new edition has been enlarged to include also waves on orthotropic plates, and the vibration and radiation of cylindrical shells.
Download or read book Acoustic Metamaterials and Phononic Crystals written by Pierre A. Deymier and published by Springer Science & Business Media. This book was released on 2013-01-13 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book presents all aspects of acoustic metamaterials and phononic crystals. The emphasis is on acoustic wave propagation phenomena at interfaces such as refraction, especially unusual refractive properties and negative refraction. A thorough discussion of the mechanisms leading to such refractive phenomena includes local resonances in metamaterials and scattering in phononic crystals.
Download or read book ISMA 2004 written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Vibrations written by Michel Geradin and published by John Wiley & Sons. This book was released on 2015-02-16 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibrations: Theory and Application to Structural Dynamics, Third Edition is a comprehensively updated new edition of the popular textbook. It presents the theory of vibrations in the context of structural analysis and covers applications in mechanical and aerospace engineering. Key features include: A systematic approach to dynamic reduction and substructuring, based on duality between mechanical and admittance concepts An introduction to experimental modal analysis and identification methods An improved, more physical presentation of wave propagation phenomena A comprehensive presentation of current practice for solving large eigenproblems, focusing on the efficient linear solution of large, sparse and possibly singular systems A deeply revised description of time integration schemes, providing framework for the rigorous accuracy/stability analysis of now widely used algorithms such as HHT and Generalized-α Solved exercises and end of chapter homework problems A companion website hosting supplementary material
Download or read book Propagation of Sound in Porous Media written by J.F. Allard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has grown out of the research activities of the author in the fields of sound propagation in porous media and modelling of acoustic materials. It is assumed that the reader has a background of advanced calculus, including an introduction to differential equations, complex variables and matrix algebra. A prior exposure to theory of elasticity would be advantageous. Chapters 1-3 deal with sound propagation of plane waves in solids and fluids, and the topics of acoustic impedance and reflection coefficient are given a large emphasis. The topic of flow resistivity is presented in Chapter 2. Chapter 4 deals with sound propagation in porous materials having cylindrical pores. The topics of effective density, and of tortuosity, are presented. The thermal exchanges between the frame and the fluid, and the behaviour of the bulk modulus of the fluid, are described in this simple context. Chapter 5 is concerned with sound propagation in other porous materials, and the recent notions of characteristic dimensions, which describe thermal exchanges and the viscous forces at high frequencies, are introduced. In Chapter 6, the case of porous media having an elastic frame is considered in the context of Biot theory, where new topics described in Chapter 5 have been included.
Download or read book Surface Acoustic Waves in Inhomogeneous Media written by Sergey V. Biryukov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Acoustic Waves in Inhomogeneous Media covers almost all important problems of the interaction of different types of surface acoustic waves with surface inhomogeneities. The problems of surface acoustic wave interaction with periodic topographic gratings widely used in filters and resonators are under careful consideration. The most important results of surface wave scattering by local defects such as grooves, random roughness, elastic wedges are given. Different theoretical approaches and practical rules for solving the surface wave problems are presented.
Download or read book Sound and Structural Vibration written by Frank J. Fahy and published by Elsevier. This book was released on 2007-01-12 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Sound and Structural Vibration was written in the early 1980s. Since then, two major developments have taken place in the field of vibroacoustics. Powerful computational methods and procedures for the numerical analysis of structural vibration, acoustical fields and acoustical interactions between fluids and structures have been developed and these are now universally employed by researchers, consultants and industrial organisations. Advances in signal processing systems and algorithms, in transducers, and in structural materials and forms of construction, have facilitated the development of practical means of applying active and adaptive control systems to structures for the purposes of reducing or modifying structural vibration and the associated sound radiation and transmission. In this greatly expanded and extensively revised edition, the authors have retained most of the analytically based material that forms the pedagogical content of the first edition, and have expanded it to present the theoretical foundations of modern numerical analysis. Application of the latter is illustrated by examples that have been chosen to complement the analytical approaches to solving fairly simple problems of sound radiation, transmission and fluid-structural coupling that are presented in the first edition. The number of examples of experimental data that relate to the theoretical content, and illustrate important features of vibroacoustic interaction, has been augmented by the inclusion of a selection from the vast amount of material published during the past twenty five years. The final chapter on the active control of sound and vibration has no precursor in the first edition.* Covers theoretical approaches to modeling and analysis* Highly applicable to challenges in industry and academia* For engineering students to use throughout their career
Download or read book Structural Health Monitoring Damage Detection Systems for Aerospace written by Markus G. R. Sause and published by Springer Nature. This book was released on 2021 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents established methods of structural health monitoring (SHM) and discusses their technological merit in the current aerospace environment. While the aerospace industry aims for weight reduction to improve fuel efficiency, reduce environmental impact, and to decrease maintenance time and operating costs, aircraft structures are often designed and built heavier than required in order to accommodate unpredictable failure. A way to overcome this approach is the use of SHM systems to detect the presence of defects. This book covers all major contemporary aerospace-relevant SHM methods, from the basics of each method to the various defect types that SHM is required to detect to discussion of signal processing developments alongside considerations of aerospace safety requirements. It will be of interest to professionals in industry and academic researchers alike, as well as engineering students. This article/publication is based upon work from COST Action CA18203 (ODIN - http://odin-cost.com/), supported by COST (European Cooperation in Science and Technology). COST (European Cooperation in Science and Technology) is a funding agency for research and innovation networks. Our Actions help connect research initiatives across Europe and enable scientists to grow their ideas by sharing them with their peers. This boosts their research, career and innovation.
Download or read book Evolutionary Algorithms for Solving Multi Objective Problems written by Carlos Coello Coello and published by Springer Science & Business Media. This book was released on 2007-08-26 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is a second edition of Evolutionary Algorithms for Solving Multi-Objective Problems, significantly expanded and adapted for the classroom. The various features of multi-objective evolutionary algorithms are presented here in an innovative and student-friendly fashion, incorporating state-of-the-art research. The book disseminates the application of evolutionary algorithm techniques to a variety of practical problems. It contains exhaustive appendices, index and bibliography and links to a complete set of teaching tutorials, exercises and solutions.
Download or read book Sound Transmission Through Buildings written by Robert J. M. Craik and published by Gower Publishing Company, Limited. This book was released on 1996 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction for new users of statistical energy analysis (SEA), giving all the information necessary for its application to standard structures, and showing how SEA can be used for sound transmission through buildings.
Download or read book New Trends in Vibration Based Structural Health Monitoring written by Arnaud Deraemaeker and published by Springer Science & Business Media. This book was released on 2012-01-28 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of articles covering the six lecture courses given at the CISM School on this topic in 2008. It features contributions by established international experts and offers a coherent and comprehensive overview of the state-of-the art research in the field, thus addressing both postgraduate students and researchers in aerospace, mechanical and civil engineering.
Download or read book Auralization written by Michael Vorländer and published by Springer Science & Business Media. This book was released on 2007-10-27 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first focused and detailed textbook on acoustic virtual reality. Auralization is the creation of audible acoustic sceneries from computer-generated data. The term "auralization" is to be understood as being analogue to the well-known technique of "visualization". In visual illustration of scenes, data or any other meaningful information, in movie animation and in computer graphics, we describe the process of "making visible" as visualization. In acoustics, auralization is taking place when acoustic effects, primary sound signals or means of sound reinforcement or sound transmission, are processed to be presented by using electro-acoustic equipment. This book is organized as a comprehensive collection of basics, methodology and strategies of acoustic simulation and auralization.
Download or read book The Science of String Instruments written by Thomas D. Rossing and published by Springer Science & Business Media. This book was released on 2010-12-15 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thomas D. Rossing String instruments are found in almost all musical cultures. Bowed string instruments form the backbone of symphony orchestras, and they are used widely as solo inst- ments and in chamber music as well. Guitars are used universally in pop music as well as in classical music. The piano is probably the most versatile of all musical inst- ments, used widely not only in ensemble with other musical instruments but also as a solo instrument and to accompany solo instruments and the human voice. In this book, various authors will discuss the science of plucked, bowed, and hammered string instruments as well as their electronic counterparts. We have tried to tell the fascinating story of scienti?c research with a minimum of mathematics to maximize the usefulness of the book to performers and instrument builders as well as to students and researchers in musical acoustics. Sometimes, however, it is dif?cult to “translate” ideas from the exact mathematical language of science into words alone, so we include some basic mathematical equations to express these ideas. It is impossible to discuss all families of string instruments. Some instruments have been researched much more than others. Hopefully, the discussions in this book will help to encourage further scienti?c research by both musicians and scientists alike. 1.1 A Brief History of the Science of String Instruments Quite a number of good histories of acoustics have been written (Lindsay 1966, 1973; Hunt 1992; Beyer 1999), and these histories include musical acoustics.
Download or read book Design and Modeling of Mechanical Systems written by Mohamed Haddar and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 5th International Congress on Design and Modeling of Mechanical Systems (CMSM) was held in Djerba, Tunisia on March 25-27, 2013 and followed four previous successful editions, which brought together international experts in the fields of design and modeling of mechanical systems, thus contributing to the exchange of information and skills and leading to a considerable progress in research among the participating teams. The fifth edition of the congress (CMSM ́2013), organized by the Unit of Mechanics, Modeling and Manufacturing (U2MP) of the National School of Engineers of Sfax, Tunisia, the Mechanical Engineering Laboratory (MBL) of the National School of Engineers of Monastir, Tunisia and the Mechanics Laboratory of Sousse (LMS) of the National School of Engineers of Sousse, Tunisia, saw a significant increase of the international participation. This edition brought together nearly 300 attendees who exposed their work on the following topics: mechatronics and robotics, dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, design and manufacturing of mechanical systems. This book is the proceedings of CMSM ́2013 and contains a careful selection of high quality contributions, which were exposed during various sessions of the congress. The original articles presented here provide an overview of recent research advancements accomplished in the field mechanical engineering.
Download or read book Signal Processing for Active Control written by Stephen Elliott and published by Elsevier. This book was released on 2000-09-26 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Signal Processing for Active Control sets out the signal processing and automatic control techniques that are used in the analysis and implementation of active systems for the control of sound and vibration. After reviewing the performance limitations introduced by physical aspects of active control, Stephen Elliott presents the calculation of the optimal performance and the implementation of adaptive real time controllers for a wide variety of active control systems.Active sound and vibration control are technologically important problems with many applications. 'Active control' means controlling disturbance by superimposing a second disturbance on the original source of disturbance. Put simply, initial noise + other specially-generated noise or vibration = silence [or controlled noise]. This book presents a unified approach to techniques that are used in the analysis and implementation of different control systems. It includes practical examples at the end of each chapter to illustrate the use of various approaches.This book is intended for researchers, engineers, and students in the field of acoustics, active control, signal processing, and electrical engineering.
Download or read book Handbook of Materials for String Musical Instruments written by Voichita Bucur and published by Springer. This book was released on 2016-08-29 with total page 977 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses core questions about the role of materials in general and of wood in particular in the construction of string instruments used in the modern symphony orchestra – violins, violas, cellos and basses. Further attention is given to materials for classical guitars, harps, harpsichords and pianos. While some of the approaches discussed are traditional, most of them depend upon new scientific approaches to the study of the structure of materials, such as for example wood cell structure, which is visible only using modern high resolution microscopic techniques. Many examples of modern and classical instruments are examined, together with the relevance of classical techniques for the treatment of wood. Composite materials, especially designed for soundboards could be a good substitute for some traditional wood species. The body and soundboard of the instrument are of major importance for their acoustical properties, but the study also examines traditional and new wood species used for items such as bows, the instrument neck, string pegs, etc. Wood species’ properties for musical instruments and growth origins of woods used by great makers such as Antonio Stradivari are examined and compared with more recently grown woods available to current makers. The role of varnish in the appearance and acoustics of the final instrument is also discussed, since it has often been proposed as a ‘secret ingredient’ used by great makers. Aspects related to strings are commented.As well as discussing these subjects, with many illustrations from classical and contemporary instruments, the book gives attention to conservation and restoration of old instruments and the physical results of these techniques. There is also discussion of the current value of old instruments both for modern performances and as works of art having great monetary value.The book will be of interest and value to researchers, advanced students, music historians, and contemporary string instrument makers. Musicians in general, particularly those playing string instruments, will also find its revelations fascinating. It will also attract the attention of those using wood for a variety of other purposes, for its use in musical instruments uncovers many of its fundamental features. Professor Neville H. FletcherAustralian National University, Canberra
