Download or read book Vibratory Gyroscopes Based on Micro Electro Mechanical and non Micro Electro Mechanical Systems written by Valeri V. Chikovani and published by Cambridge Scholars Publishing. This book was released on 2023-12-15 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a unified approach for the two versions of Coriolis vibratory gyroscopes: Micro-Electro-Mechanical System (MEMS) and non-MEMS. It describes a new, differential mode of operation, analyzing the new triple mode gyro—rate, rate-integrating, and differential. The latter provides the gyro with an increased versatility by providing the maximum possible accuracy under changeable motion parameters and environmental conditions. The book also presents computer simulation, experiments, and test results on the rejection of external disturbances, and considers the fabrication processes of MEMS, metallic and quartz resonators. It will interest researchers, scientists, engineers, and students specializing in the field of inertial sensors, as well as engineers of digital control systems, and inertial sensors test-engineers. It can also be used as a reference book when designing vibratory gyros.
Download or read book Whole Angle MEMS Gyroscopes written by Doruk Senkal and published by John Wiley & Sons. This book was released on 2020-05-11 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the mathematical framework, technical language, and control systems know-how needed to design, develop, and instrument micro-scale whole-angle gyroscopes This comprehensive reference covers the technical fundamentals, mathematical framework, and common control strategies for degenerate mode gyroscopes, which are used in high-precision navigation applications. It explores various energy loss mechanisms and the effect of structural imperfections, along with requirements for continuous rate integrating gyroscope operation. It also provides information on the fabrication of MEMS whole-angle gyroscopes and the best methods of sustaining oscillations. Whole-Angle Gyroscopes: Challenges and Opportunities begins with a brief overview of the two main types of Coriolis Vibratory Gyroscopes (CVGs): non-degenerate mode gyroscopes and degenerate mode gyroscopes. It then introduces readers to the Foucault Pendulum analogy and a review of MEMS whole angle mode gyroscope development. Chapters cover: dynamics of whole-angle coriolis vibratory gyroscopes; fabrication of whole-angle coriolis vibratory gyroscopes; energy loss mechanisms of coriolis vibratory gyroscopes; and control strategies for whole-angle coriolis vibratory gyro- scopes. The book finishes with a chapter on conventionally machined micro-machined gyroscopes, followed by one on micro-wineglass gyroscopes. In addition, the book: Lowers barrier to entry for aspiring scientists and engineers by providing a solid understanding of the fundamentals and control strategies of degenerate mode gyroscopes Organizes mode-matched mechanical gyroscopes based on three classifications: wine-glass, ring/disk, and mass spring mechanical elements Includes case studies on conventionally micro-machined and 3-D micro-machined gyroscopes Whole-Angle Gyroscopes is an ideal book for researchers, scientists, engineers, and college/graduate students involved in the technology. It will also be of great benefit to engineers in control systems, MEMS production, electronics, and semi-conductors who work with inertial sensors.
Download or read book MEMS Vibratory Gyroscopes written by Cenk Acar and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS Vibratory Gyroscopes provides a solid foundation in the theory and fundamental operational principles of micromachined vibratory rate gyroscopes, and introduces structural designs that provide inherent robustness against structural and environmental variations. In the first part, the dynamics of the vibratory gyroscope sensing element is developed, common micro-fabrication processes and methods commonly used in inertial sensor production are summarized, design of mechanical structures for both linear and torsional gyroscopes are presented, and electrical actuation and detection methods are discussed along with details on experimental characterization of MEMS gyroscopes. In the second part, design concepts that improve robustness of the micromachined sensing element are introduced, supported by constructive computational examples and experimental results illustrating the material.
Download or read book Mechanical Design Dynamics and Control of Micro Vibratory Gyroscopes written by Seyed Parsa Taheri Tehrani and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-machined vibratory gyroscopes are very small devices (up to a few millimeters in dimension) that work based on Coriolis force coupling between two resonance modes. The small size, low power consumption, and cheap price make these sensors popular in automotive, gaming, smart phones, and robotics industries. These sensors referred to as MEMS (microelectromechanical system) gyroscopes are currently not used for navigation applications because due to their miniature size and imperfections in fabrication methods they do not have enough accuracy. In this thesis, we present methods in design and control algorithms for MEMS vibratory gyroscopes to cancel the effect of imperfections in fabrication and improve gyroscopes' performance. First chapter of this thesis is an introduction on MEMS vibratory gyroscopes and their principles and standard operations modes.The second chapter presents the structural design and analysis of a single-structure 3-axis MEMS gyroscope. The gyroscope has four resonant modes of interest and uses a decoupling mechanism whereby auxiliary masses are used to actuate the drive mode of the gyroscope in order to reduce drive-force coupling to sense modes' motion (one of the sources of errors in MEMS gyroscopes). The use of auxiliary masses results in a two degree-of-freedom (DOF) mechanism of the drive mode. To compare the effectiveness of using auxiliary masses two gyroscope types has been design one actuated from auxiliary masses (type A) and one actuated from major masses (type B). The two designs are simulated analytically to study the displacement of each mass in each design while comparing the force required to achieve that displacement for drive mode. Experimental data from fabricated devices show how using auxiliary masses will decrease drive force coupling and as a result improve the gyroscope's performance. Third chapter describes the operation of a high quality factor gyroscope in various regimes where electromechanical nonlinearities introduce different forms of amplitude-frequency (A-f) dependence. Experiments are conducted using an epitaxially-encapsulated 2 x 2 mm2 quad-mass gyroscope (QMG) with a quality factor of 85,000. The device exhibits third-order Duffing nonlinearity at low bias voltages (15 V) due to the mechanical nonlinearity in the flexures and at high bias voltages (35 V) due to third-order electrostatic nonlinearity. At intermediate voltages (26 V), these third-order nonlinearities cancel and the amplitude-frequency dependence is greatly reduced. A model is developed to demonstrate the connection between the electromechanical nonlinearities and the amplitude-frequency dependence, also known as the backbone curve. Gyroscope operation is demonstrated in each nonlinear operating regime and the key performance measures of the gyroscope's performance, angle random walk (ARW) and bias instability, are measured as a function of drive-mode vibration amplitude. While the bias instability is nearly independent of the drive-mode’s nonlinearity, we find that ARW increases when the third-order nonlinearities are minimized, and the decrease in ARW due to increase of amplitude is independent of drive mode's type of nonlinearity.In the fourth chapter we present a direct angle measurement method in gyroscopes. Towards the objective of direct angle measurement using a rate integrating gyroscope (RIG) without a minimum rate threshold and performance limited only by electrical and mechanical thermal noise, in this chapter we present the implementation of a generalized electronic feedback method for the compensation of MEMS gyroscope damping asymmetry (anisodamping) and stiffness asymmetry (anisoelasticity) on a stand-alone digital signal processing (DSP) platform. Using the new method, the precession angle dependent bias error and minimum rate threshold, two issues identified by Lynch for a MEMS RIG due to anisodamping are overcome. To minimize angle dependent bias, we augment the electronic feedback force of the amplitude regulator with a non-unity gain output distribution matrix selected to correct for anisodamping. Using this method, we have decreased the angle dependent bias error by a factor of 30, resulting a minimum rate threshold of 2.5 dps. To further improve RIG performance, an electronically-induced self-precession rate is incorporated and successfully demonstrated to lower the rate threshold.
Download or read book Advanced Control Design of MEMS Vibratory Gyroscopes written by Juntao Fei and published by . This book was released on 2011-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS (Micro Electro Mechanical Systems) technologies were developed by applying semiconductor microfabrication technologies to make three-dimensional microstructures and mechanical systems. MEMS technologies offer the advantages of batch fabrication of numbers of devices as well as an ability to integrate multiple functional units in a small area, which is important for developing smart and sophisticated devices. Gyroscopes are commonly used sensors for measuring angular velocity in many areas of applications such as navigation, homing, and control stabilisation. Fabrication imperfections and thermal, mechanical noise may hinder the measurement of angular velocity of MEMS gyroscope. This book presents a comprehensive treatment of the analysis and advanced control design of MEMS gyroscope for the problem of angular velocity measurement and minimisation of the cross coupling between two axes.
Download or read book Mems Nems written by Cornelius T. Leondes and published by Springer Science & Business Media. This book was released on 2007-10-08 with total page 2142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This significant and uniquely comprehensive five-volume reference is a valuable source for research workers, practitioners, computer scientists, students, and technologists. It covers all of the major topics within the subject and offers a comprehensive treatment of MEMS design, fabrication techniques, and manufacturing methods. It also includes current medical applications of MEMS technology and provides applications of MEMS to opto-electronic devices. It is clearly written, self-contained, and accessible, with helpful standard features including an introduction, summary, extensive figures and design examples with comprehensive reference lists.
Download or read book Mems for Biomedical Applications written by Shekhar Bhansali and published by Elsevier. This book was released on 2012-07-18 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of Micro Electro Mechanical Systems (MEMS) in the biomedical field is leading to a new generation of medical devices. MEMS for biomedical applications reviews the wealth of recent research on fabrication technologies and applications of this exciting technology.The book is divided into four parts: Part one introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms. Part two describes applications of MEMS for biomedical sensing and diagnostic applications. MEMS for in vivo sensing and electrical impedance spectroscopy are investigated, along with ultrasonic transducers, and lab-on-chip devices. MEMS for tissue engineering and clinical applications are the focus of part three, which considers cell culture and tissue scaffolding devices, BioMEMS for drug delivery and minimally invasive medical procedures. Finally, part four reviews emerging biomedical applications of MEMS, from implantable neuroprobes and ocular implants to cellular microinjection and hybrid MEMS.With its distinguished editors and international team of expert contributors, MEMS for biomedical applications provides an authoritative review for scientists and manufacturers involved in the design and development of medical devices as well as clinicians using this important technology. Reviews the wealth of recent research on fabrication technologies and applications of Micro Electro Mechanical Systems (MEMS) in the biomedical field Introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms Considers MEMS for biomedical sensing and diagnostic applications, along with MEMS for in vivo sensing and electrical impedance spectroscopy
Download or read book Coriolis Vibratory Gyroscopes written by Vladislav Apostolyuk and published by Springer. This book was released on 2015-08-12 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the latest theoretical analysis and design methodologies of different types of Coriolis vibratory gyroscopes (CVG). Together, the chapters analyze different types of sensitive element designs and their kinematics, derivation of motion equations, analysis of sensitive elements dynamics in modulated and demodulated signals, calculation and optimization of main performance characteristics, and signal processing and control. Essential aspects of numerical simulation of CVG using Simulink® are also covered. This is an ideal book for graduate students, researchers, and engineers working in fields that require gyroscope application, including but not limited to: inertial sensors and systems, automotive and consumer electronics, small unmanned aircraft control systems, personal mobile navigation systems and related software development, and augmented and virtual reality systems.
Download or read book Fabrication Testing and Characterization of MEMS Gyroscope written by Ridha Almikhlafi and published by . This book was released on 2017 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents the design, fabrication and characterization of two Micro-Electro-Mechanical Systems (MEMS) vibratory gyroscopes fabricated using the Silicon-On-Insulator-Multi-User-MEMS Process (SOIMUMPs) and Polysilicon Multi-User-MEMS-Process (Poly-MUMPs). Firstly, relevant literature and background on static and dynamic analysis of MEMS gyroscopes are described. Secondly, the gyroscope analytical model is presented and numerically solved using Mathematica software. The lumped mass model was used to analytically design the gyroscope and predict their performance. Finite element analysis was carried out on the gyroscopes to verify the proposed designs. Thirdly, gyroscope fabrication using MEMSCAP's SOIMUMPs and PolyMUMPs processes is described. For the former, post-processing was carried out at the Quantum Nanofab Center (QNC) on a die-level in order to create the vibratory structural elements (cantilever beam). Following this, the PolyMUMPs gyroscopes are characterized optically by measuring their resonance frequencies and quality factor using a Laser Doppler Vibrometer (LDV). The drive resonance frequency was measured at 40 kHz and the quality factor as Q = 1. For the sense mode, the resonance frequency was measured at 55 kHz and the unity quality factor as Q = 1. The characterization results show large drive direction motions of 100 um/s in response to a voltage pulse of 10 V. The drive pull-in voltage was measured at 19 V. Finally, the ratio of the measured drive to sense mode velocities in response to a voltage pulse of 10 V was calculated at 1.375.
Download or read book Mechanical Analysis and Design of Vibratory Micromachined Gyroscopes written by Wyatt Owen Davis and published by . This book was released on 2001 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics of Mechanical Systems with Non Ideal Excitation written by Livija Cveticanin and published by Springer. This book was released on 2017-07-01 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the dynamics of the non-ideal oscillatory system, in which the excitation is influenced by the response of the oscillator, is presented. Linear and nonlinear oscillators with one or more degrees of freedom interacting with one or more energy sources are treated. This concerns for example oscillating systems excited by a deformed elastic connection, systems excited by an unbalanced rotating mass, systems of parametrically excited oscillator and an energy source, frictionally self-excited oscillator and an energy source, energy harvesting system, portal frame – non-ideal source system, non-ideal rotor system, planar mechanism – non-ideal source interaction. For the systems the regular and irregular motions are tested. The effect of self-synchronization, chaos and methods for suppressing chaos in non-ideal systems are considered. In the book various types of motion control are suggested. The most important property of the non-ideal system connected with the jump-like transition from a resonant state to a non-resonant one is discussed. The so called ‘Sommerfeld effect’, resonant unstable state and jumping of the system into a new stable state of motion above the resonant region is explained. A mathematical model of the system is solved analytically and numerically. Approximate analytical solving procedures are developed. Besides, simulation of the motion of the non-ideal system is presented. The obtained results are compared with those for the ideal case. A significant difference is evident. The book aims to present the established results and to expand the literature in non-ideal vibrating systems. A further intention of the book is to give predictions of the effects for a system where the interaction between an oscillator and the energy source exist. The book is targeted at engineers and technicians dealing with the problem of source-machine system, but is also written for PhD students and researchers interested in non-linear and non-ideal problems.
Download or read book MEMS Vibratory Gyroscopes written by Cenk Acar and published by Springer. This book was released on 2008-12-16 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS Vibratory Gyroscopes provides a solid foundation in the theory and fundamental operational principles of micromachined vibratory rate gyroscopes, and introduces structural designs that provide inherent robustness against structural and environmental variations. In the first part, the dynamics of the vibratory gyroscope sensing element is developed, common micro-fabrication processes and methods commonly used in inertial sensor production are summarized, design of mechanical structures for both linear and torsional gyroscopes are presented, and electrical actuation and detection methods are discussed along with details on experimental characterization of MEMS gyroscopes. In the second part, design concepts that improve robustness of the micromachined sensing element are introduced, supported by constructive computational examples and experimental results illustrating the material.
Download or read book Magnetic Sensors and Devices written by Laurent A. Francis and published by CRC Press. This book was released on 2017-10-18 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents in-depth coverage of magnetic sensors in industrial applications. It is divided into three sections: devices and technology for magnetic sensing, industrial applications (automotive, navigation), and emerging applications. Topics include transmission speed sensor ICs, dynamic differential Hall ICs, chopped Hall switches, programmable linear output Hall sensors, low power Hall ICs, self-calibrating differential Hall ICs for wheel speed sensing, dynamic differential Hall ICs, uni- and bipolar Hall IC switches, chopped mono cell Hall ICs, and electromagnetic levitation.
Download or read book Toward Inertial Navigation on Chip written by Haoran Wen and published by Springer Nature. This book was released on 2019-09-14 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis develops next-generation multi-degree-of-freedom gyroscopes and inertial measurement units (IMU) using micro-electromechanical-systems (MEMS) technology. It covers both a comprehensive study of the physics of resonator gyroscopes and novel micro/nano-fabrication solutions to key performance limits in MEMS resonator gyroscopes. Firstly, theoretical and experimental studies of physical phenomena including mode localization, nonlinear behavior, and energy dissipation provide new insights into challenges like quadrature errors and flicker noise in resonator gyroscope systems. Secondly, advanced designs and micro/nano-fabrication methods developed in this work demonstrate valuable applications to a wide range of MEMS/NEMS devices. In particular, the HARPSS+ process platform established in this thesis features a novel slanted nano-gap transducer, which enabled the first wafer-level-packaged single-chip IMU prototype with co-fabricated high-frequency resonant triaxial gyroscopes and high-bandwidth triaxial micro-gravity accelerometers. This prototype demonstrates performance amongst the highest to date, with unmatched robustness and potential for flexible substrate integration and ultra-low-power operation. This thesis shows a path toward future low-power IMU-based applications including wearable inertial sensors, health informatics, and personal inertial navigation.
Download or read book Principles of Microelectromechanical Systems written by Ki Bang Lee and published by John Wiley & Sons. This book was released on 2011-03-21 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The building blocks of MEMS design through closed-form solutions Microelectromechanical Systems, or MEMS, is the technology of very small systems; it is found in everything from inkjet printers and cars to cell phones, digital cameras, and medical equipment. This book describes the principles of MEMS via a unified approach and closed-form solutions to micromechanical problems, which have been recently developed by the author and go beyond what is available in other texts. The closed-form solutions allow the reader to easily understand the linear and nonlinear behaviors of MEMS and their design applications. Beginning with an overview of MEMS, the opening chapter also presents dimensional analysis that provides basic dimensionless parameters existing in large- and small-scale worlds. The book then explains microfabrication, which presents knowledge on the common fabrication process to design realistic MEMS. From there, coverage includes: Statics/force and moment acting on mechanical structures in static equilibrium Static behaviors of structures consisting of mechanical elements Dynamic responses of the mechanical structures by the solving of linear as well as nonlinear governing equations Fluid flow in MEMS and the evaluation of damping force acting on the moving structures Basic equations of electromagnetics that govern the electrical behavior of MEMS Combining the MEMS building blocks to form actuators and sensors for a specific purpose All chapters from first to last use a unified approach in which equations in previous chapters are used in the derivations of closed-form solutions in later chapters. This helps readers to easily understand the problems to be solved and the derived solutions. In addition, theoretical models for the elements and systems in the later chapters are provided, and solutions for the static and dynamic responses are obtained in closed-forms. This book is designed for senior or graduate students in electrical and mechanical engineering, researchers in MEMS, and engineers from industry. It is ideal for radio frequency/electronics/sensor specialists who, for design purposes, would like to forego numerical nonlinear mechanical simulations. The closed-form solution approach will also appeal to device designers interested in performing large-scale parametric analysis.
Download or read book Resonant MEMS written by Oliver Brand and published by John Wiley & Sons. This book was released on 2015-04-22 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of the AMN book series, this book covers the principles, modeling and implementation as well as applications of resonant MEMS from a unified viewpoint. It starts out with the fundamental equations and phenomena that govern the behavior of resonant MEMS and then gives a detailed overview of their implementation in capacitive, piezoelectric, thermal and organic devices, complemented by chapters addressing the packaging of the devices and their stability. The last part of the book is devoted to the cutting-edge applications of resonant MEMS such as inertial, chemical and biosensors, fluid properties sensors, timing devices and energy harvesting systems.
Download or read book Advanced Materials and Technologies for Micro Nano Devices Sensors and Actuators written by Evgeni Gusev and published by Springer. This book was released on 2010-03-03 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: A NATO Advanced Research Workshop (ARW) entitled “Advanced Materials and Technologies for Micro/Nano Devices, Sensors and Actuators” was held in St. Petersburg, Russia, from June 29 to July 2, 2009. The main goal of the Workshop was to examine (at a fundamental level) the very complex scientific issues that pertain to the use of micro- and nano-electromechanical systems (MEMS and NEMS), devices and technologies in next generation commercial and defen- related applications. Micro- and nano-electromechanical systems represent rather broad and diverse technological areas, such as optical systems (micromirrors, waveguides, optical sensors, integrated subsystems), life sciences and lab equipment (micropumps, membranes, lab-on-chip, membranes, microfluidics), sensors (bio-sensors, chemical sensors, gas-phase sensors, sensors integrated with electronics) and RF applications for signal transmission (variable capacitors, tunable filters and antennas, switches, resonators). From a scientific viewpoint, this is a very multi-disciplinary field, including micro- and nano-mechanics (such as stresses in structural materials), electronic effects (e. g. charge transfer), general electrostatics, materials science, surface chemistry, interface science, (nano)tribology, and optics. It is obvious that in order to overcome the problems surrounding next-generation MEMS/NEMS devices and applications it is necessary to tackle them from different angles: theoreticians need to speak with mechanical engineers, and device engineers and modelers to listen to surface physicists. It was therefore one of the main objectives of the workshop to bring together a multidisciplinary team of distinguished researchers.