Download or read book Engineering Vibration Analysis with Application to Control Systems written by C. Beards and published by Elsevier. This book was released on 1995-06-17 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most machines and structures are required to operate with low levels of vibration as smooth running leads to reduced stresses and fatigue and little noise. This book provides a thorough explanation of the principles and methods used to analyse the vibrations of engineering systems, combined with a description of how these techniques and results can be applied to the study of control system dynamics. Numerous worked examples are included, as well as problems with worked solutions, and particular attention is paid to the mathematical modelling of dynamic systems and the derivation of the equations of motion. All engineers, practising and student, should have a good understanding of the methods of analysis available for predicting the vibration response of a system and how it can be modified to produce acceptable results. This text provides an invaluable insight into both.
Download or read book Mechanical Vibration written by Haym Benaroya and published by CRC Press. This book was released on 2017-08-29 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration: Analysis, Uncertainties, and Control, Fourth Edition addresses the principles and application of vibration theory. Equations for modeling vibrating systems are explained, and MATLAB® is referenced as an analysis tool. The Fourth Edition adds more coverage of damping, new case studies, and development of the control aspects in vibration analysis. A MATLAB appendix has also been added to help students with computational analysis. This work includes example problems and explanatory figures, biographies of renowned contributors, and access to a website providing supplementary resources.
Download or read book Engineering Vibration written by D. J. Inman and published by . This book was released on 2001 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction. Response to harmonic excitation. General forced response. Multiple-degree of -freedom systems. Design for vibration suppression. Distributed - parameter systems ...
Download or read book Engineering Dynamics and Vibrations written by Junbo Jia and published by CRC Press. This book was released on 2018-12-12 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering dynamics and vibrations has become an essential topic for ensuring structural integrity and operational functionality in different engineering areas. However, practical problems regarding dynamics and vibrations are in many cases handled without success despite large expenditures. This book covers a wide range of topics from the basics to advances in dynamics and vibrations; from relevant engineering challenges to the solutions; from engineering failures due to inappropriate accounting of dynamics to mitigation measures and utilization of dynamics. It lays emphasis on engineering applications utilizing state-of-the-art information.
Download or read book Introduction to Vibration in Engineering written by Sung Lee and published by . This book was released on 2019-10-15 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Vibration in Engineering is a concisely written text that helps students master the fundamentals of vibration. Students learn how to construct equations of motion using the energy approach, as well as the Newton's second law, and how to use analytical and computational tools for vibration analysis. Clear and concise, the book covers free and forced vibration response, steady state responses of single degree of freedom systems, and the multi
Download or read book Fundamentals of Vibration Analysis written by Nils O. Myklestad and published by Courier Dover Publications. This book was released on 2018-05-16 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise textbook discusses vibration problems in engineering, dealing with systems of one and more than one degrees of freedom. A substantial section of Answers to Problems is included. 1956 edition.
Download or read book Random Vibration in Mechanical Systems written by Stephen H. Crandall and published by Academic Press. This book was released on 2014-05-12 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Random Vibration in Mechanical Systems focuses on the fundamental facts and theories of random vibration in a form particularly applicable to mechanical engineers. The book first offers information on the characterization and transmission of random vibration. Discussions focus on the normal or Gaussian random process; excitation-response relations for stationary random processes; response of a single-degree-of-freedom system to stationary random excitation; wide-band and narrow-band random processes; and frequency decomposition of stationary random processes. The text then examines failure due to random vibration, including failure due to first excursion up to a certain level; fatigue failure due to a stationary narrow-band random stress process; failure due to an accumulation of damage; failure due to response remaining above a certain level for too great a fraction of the time; and failure mechanisms. The manuscript is a vital reference for mechanical engineers and researchers interested in random vibration in mechanical systems.
Download or read book Mechanical Vibration written by William John Palm and published by . This book was released on 2007 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model, analyze, and solve vibration problems, using modern computer tools. Featuring clear explanations, worked examples, applications, and modern computer tools, William Palm's Mechanical Vibration provides a firm foundation in vibratory systems. You'll learn how to apply knowledge of mathematics and science to model and analyze systems ranging from a single degree of freedom to complex systems with two and more degrees of freedom. Separate MATLAB sections at the end of most chapters show how to use the most recent features of this standard engineering tool, in the context of solving vibration problems. The text introduces Simulink where solutions may be difficult to program in MATLAB, such as modeling Coulomb friction effects and simulating systems that contain non-linearities. Ample problems throughout the text provide opportunities to practice identifying, formulating, and solving vibration problems. KEY FEATURES Strong pedagogical approach, including chapter objectives and summaries Extensive worked examples illustrating applications Numerous realistic homework problems Up-to-date MATLAB coverage The first vibration textbook to cover Simulink Self-contained introduction to MATLAB in Appendix A Special section dealing with active vibration control in sports equipment Special sections devoted to obtaining parameter values from experimental data
Download or read book Engineering Vibration Analysis written by Valery A. Svetlitsky and published by Springer Science & Business Media. This book was released on 2012-11-07 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory of vibrations belongs to principal subjects needed for training mechani cal engineers in technological universities. Therefore, the basic goal of the mono graph "Advanced Theory of Vibrations 1" is to help students studying vibration theory for gaining experience in application of this theory for solving particular problems. Thus, while choosing the problems and methods to solve them, the close attention was paid to the applied content of vibration theory. The monograph is devoted to systems with a single degree of freedom and sys tems with a finite number of degrees of freedom. In particular, problems are for mulated associated with determination of frequencies and forms of vibrations, study of forced vibrations, analysis of both stable and unstable vibrations (includ ing those caused by periodic but anharmonic forces). The problems of nonlinear vibrations and of vibration stability, and those related to seeking probabilistic characteristics for solutions to these problems in the case of random forces are also considered. Problems related to parametric vibrations and statistical dynamics of mechanical systems, as well as to determination of critical parameters and of dy namic stability are also analyzed. As a rule, problems presented in the monograph are associated with particular mechanical systems and can be applied for current studies in vibration theory. Al lowing for interests of students independently studying theory of vibrations, the majority of problems are supplied with either detailed solutions or algorithms of the solutions.
Download or read book Fundamentals of Noise and Vibration Analysis for Engineers written by M. P. Norton and published by Cambridge University Press. This book was released on 2003-10-16 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noise and Vibration affects all kinds of engineering structures, and is fast becoming an integral part of engineering courses at universities and colleges around the world. In this second edition, Michael Norton's classic text has been extensively updated to take into account recent developments in the field. Much of the new material has been provided by Denis Karczub, who joins Michael as second author for this edition. This book treats both noise and vibration in a single volume, with particular emphasis on wave-mode duality and interactions between sound waves and solid structures. There are numerous case studies, test cases, and examples for students to work through. The book is primarily intended as a textbook for senior level undergraduate and graduate courses, but is also a valuable reference for researchers and professionals looking to gain an overview of the field.
Download or read book Vibration Engineering and Technology of Machinery written by José Manoel Balthazar and published by Springer Nature. This book was released on 2021-03-03 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations and applications in the field of vibration and technology of machinery, as presented by leading international researchers and engineers at the XV International Conference on Vibration Engineering and Technology of Machinery (VETOMAC), held in Curitiba, Brazil on November 10-15, 2019. Topics include concepts and methods in dynamics, dynamics of mechanical and structural systems, dynamics and control, condition monitoring, machinery and structural dynamics, rotor dynamics, experimental techniques, finite element model updating, industrial case studies, vibration control and energy harvesting, and MEMS. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations.
Download or read book Mechanical Vibrations written by J. P. Den Hartog and published by Courier Corporation. This book was released on 2013-02-28 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic text combines the scholarly insights of its distinguished author with the practical, problem-solving orientation of an experienced industrial engineer. Abundant examples and figures, plus 233 problems and answers. 1956 edition.
Download or read book Noise and Vibration Control Engineering written by István L. Vér and published by John Wiley & Sons. This book was released on 2005-11-11 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noise and Vibration Control Engineering: Principles and Applications, Second Edition is the updated revision of the classic reference containing the most important noise control design information in a single volume of manageable size. Specific content updates include completely revised material on noise and vibration standards, updated information on active noise/vibration control, and the applications of these topics to heating, ventilating, and air conditioning.
Download or read book Vibration Engineering for a Sustainable Future written by Sebastian Oberst and published by Springer Nature. This book was released on 2021-04-22 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the proceedings of the Asia-Pacific Vibration Conference (APVC) 2019, "Vibration Engineering for a Sustainable Future," emphasizing work devoted to numerical simulation and modelling. The APVC is one of the larger conferences held biannually with the intention to foster scientific and technical research collaboration among Asia-Pacific countries. The APVC provides a forum for researchers, practitioners, and students from, but not limited to, areas around the Asia-Pacific countries in a collegial and stimulating environment to present, discuss and disseminate recent advances and new findings on all aspects of vibration and noise, their control and utilization. All aspects of vibration, acoustics, vibration and noise control, vibration utilization, fault diagnosis and monitoring are appropriate for the conference, with the focus this year on the vibration aspects in dynamics and noise & vibration. This 18th edition of the APVC was held in November 2019 in Sydney, Australia. The previous seventeen conferences have been held in Japan (‘85, ’93, ‘07), Korea (’87, ’97, ‘13), China (’89, ’01, ’11, ‘17), Australia (’91, ‘03), Malaysia (’95, ‘05), Singapore (‘99), New Zealand (‘09) and Vietnam (‘15).
Download or read book Vibration for Engineers written by Andrew D. Dimarogonas and published by . This book was released on 1996 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehsive text is intended for use on one- or two-term introductory courses in vibrations taught to mechanical, aerospace, engineering mechanics, and civil engineering undergraduates. The work emphasizes design and extends the discussion of design beyond handbook solutions for component sizing to include the assumptions underlying the handbook solutions. Symbolic processing is introduced for those readers who want to extend their understanding of the fundamentals of vibration analysis. The text also includes historical references so that students will understand how vibration theories developed. Drill exercises have been added to the introductory chapters to help students understand basic concepts before proceeding to solve more complex problems requiring numerical results, and a new appendix has been added with tables covering mass, damping and stiffness properties of engineering materials.
Download or read book Advanced Vibration Analysis written by S. Graham Kelly and published by CRC Press. This book was released on 2006-12-19 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Delineating a comprehensive theory, Advanced Vibration Analysis provides the bedrock for building a general mathematical framework for the analysis of a model of a physical system undergoing vibration. The book illustrates how the physics of a problem is used to develop a more specific framework for the analysis of that problem. The author elucidat
Download or read book Mechanical vibration and shock measurements written by Jens Trampe Broch and published by . This book was released on 1984 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
