Download or read book Vibration Dynamics and Control written by Giancarlo Genta and published by Springer Science & Business Media. This book was released on 2008-11-16 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical engineering,and engineering discipline born of the needs of the industrial revolution, is once again asked to do its substantial share in the call for industrial renewal. The general call is urgent as we face p- found issues of productivity and competitiveness that require engineering solutions, among others. The Mechanical Engineering Series is a series f- turing graduate texts and research monographs intended to address the need for information in contemporary areas of mechanical engineering. The series is conceived as a comprehensive one that covers a broad range of concentrations important to mechanical engineering graduate - ucation and research. We are fortunate to have a distinguished roster of series editors, each an expert in one of the areas of concentration. The names of the series editors are listed on page vi of this volume. The areas of concentration are applied mechanics, biomechanics, computational - chanics, dynamic systems and control, energetics, mechanics of materials, processing, thermal science, and tribology. Preface After15yearssincethepublicationofVibrationofStructuresandMachines and three subsequent editions a deep reorganization and updating of the material was felt necessary. This new book on the subject of Vibration dynamics and control is organized in a larger number of shorter chapters, hoping that this can be helpful to the reader. New materialhas been added and many points have been updated. A larger number of examples and of exercises have been included.

Download or read book Vibration Dynamics and Control written by Giancarlo Genta and published by Springer Science & Business Media. This book was released on 2008-12-17 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical engineering,and engineering discipline born of the needs of the industrial revolution, is once again asked to do its substantial share in the call for industrial renewal. The general call is urgent as we face p- found issues of productivity and competitiveness that require engineering solutions, among others. The Mechanical Engineering Series is a series f- turing graduate texts and research monographs intended to address the need for information in contemporary areas of mechanical engineering. The series is conceived as a comprehensive one that covers a broad range of concentrations important to mechanical engineering graduate - ucation and research. We are fortunate to have a distinguished roster of series editors, each an expert in one of the areas of concentration. The names of the series editors are listed on page vi of this volume. The areas of concentration are applied mechanics, biomechanics, computational - chanics, dynamic systems and control, energetics, mechanics of materials, processing, thermal science, and tribology. Preface After15yearssincethepublicationofVibrationofStructuresandMachines and three subsequent editions a deep reorganization and updating of the material was felt necessary. This new book on the subject of Vibration dynamics and control is organized in a larger number of shorter chapters, hoping that this can be helpful to the reader. New materialhas been added and many points have been updated. A larger number of examples and of exercises have been included.

Download or read book System Dynamics and Mechanical Vibrations written by Dietmar Findeisen and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of "linear systems analysis" applied to dynamic systems as an approach to interdisciplinary system design beyond the related area of electrical engineering. The text gives an interpretation of mechanical vibrations based on the theory of dynamic systems, aiming to bridge the gap between existing theoretical methods in different engineering disciplines and to enable advanced students or professionals to model dynamic and vibrating systems with reference to communication and control processes. Emphasizing the theory it presents a balanced coverage of analytical principles and applications to vibrations with regard to mechatronic problems.

Download or read book Dynamic Modeling and Active Vibration Control of Structures written by Moon Kyu Kwak and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the active vibration control techniques which have been developed to suppress excessive vibrations of structures. It covers the fundamental principles of active control methods and their applications and shows how active vibration control techniques have replaced traditional passive vibration control. The book includes coverage of dynamic modeling, control design, sensing methodology, actuator mechanism and electronic circuit design, and the implementation of control algorithms via digital controllers. An in-depth approach has been taken to describe the modeling of structures for control design, the development of control algorithms suitable for structural control, and the implementation of control algorithms by means of Simulink block diagrams or C language. Details of currently available actuators and sensors and electronic circuits for signal conditioning and filtering have been provided based on the most recent advances in the field. The book is used as a textbook for students and a reference for researchers who are interested in studying cutting-edge technology. It will be a valuable resource for academic and industrial researchers and professionals involved in the design and manufacture of active vibration controllers for structures in a wide variety of fields and industries including the automotive, rail, aerospace, and civil engineering sectors.

Download or read book Nonlinear Vibration with Control written by David Wagg and published by Springer. This book was released on 2014-11-03 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive discussion of nonlinear multi-modal structural vibration problems, and shows how vibration suppression can be applied to such systems by considering a sample set of relevant control techniques. It covers the basic principles of nonlinear vibrations that occur in flexible and/or adaptive structures, with an emphasis on engineering analysis and relevant control techniques. Understanding nonlinear vibrations is becoming increasingly important in a range of engineering applications, particularly in the design of flexible structures such as aircraft, satellites, bridges, and sports stadia. There is an increasing trend towards lighter structures, with increased slenderness, often made of new composite materials and requiring some form of deployment and/or active vibration control. There are also applications in the areas of robotics, mechatronics, micro electrical mechanical systems, non-destructive testing and related disciplines such as structural health monitoring. Two broader themes cut across these application areas: (i) vibration suppression – or active damping – and, (ii) adaptive structures and machines. In this expanded 2nd edition, revisions include: An additional section on passive vibration control, including nonlinear vibration mounts. A more in-depth description of semi-active control, including switching and continuous schemes for dampers and other semi-active systems. A complet e reworking of normal form analysis, which now includes new material on internal resonance, bifurcation of backbone curves and stability analysis of forced responses. Further analysis of the nonlinear dynamics of cables including internal resonance leading to whirling. Additional material on the vibration of systems with impact friction. The book is accessible to practitioners in the areas of application, as well as students and researchers working on related topics. In particular, the aim is to introduce the key concepts of nonlinear vibration to readers who have an understanding of linear vibration and/or linear control, but no specialist knowledge in nonlinear dynamics or nonlinear control.

Download or read book Dynamics and Control of Machines written by V.K. Astashev and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic models and concepts of machine dynamics and motion control are presented in the order of the principal steps of machine design. The machine is treated as a coupled dynamical system, including drive, mechanisms and controller, to reveal its behavior at different regimes through the interaction of its units under dynamic and processing loads. The main dynamic effects in machines are explained. The influence of component compliances on accuracy, stability and efficiency of the machines is analyzed. Methods for decreasing internal and external vibration activity of machines are described. The dynamic features of digital control are considered. Special attention is given to machines with intense dynamic behavior: resonant and hand-held percussion ones. Targeted to engineers as well as to lecturers and advanced students.

Download or read book Engineering Vibration Analysis with Application to Control Systems written by C. Beards and published by Elsevier. This book was released on 1995-06-17 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most machines and structures are required to operate with low levels of vibration as smooth running leads to reduced stresses and fatigue and little noise. This book provides a thorough explanation of the principles and methods used to analyse the vibrations of engineering systems, combined with a description of how these techniques and results can be applied to the study of control system dynamics. Numerous worked examples are included, as well as problems with worked solutions, and particular attention is paid to the mathematical modelling of dynamic systems and the derivation of the equations of motion. All engineers, practising and student, should have a good understanding of the methods of analysis available for predicting the vibration response of a system and how it can be modified to produce acceptable results. This text provides an invaluable insight into both.

Download or read book Motion and Vibration Control written by Heinz Ulbrich and published by Springer Science & Business Media. This book was released on 2008-12-23 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motion and vibration control is a fundamental technology for the development of advanced mechanical systems such as mechatronics, vehicle systems, robots, spacecraft, and rotating machinery. Often the implementation of high performance, low power consumption designs is only possible with the use of this technology. It is also vital to the mitigation of natural hazards for large structures such as high-rise buildings and tall bridges, and to the application of flexible structures such as space stations and satellites. Recent innovations in relevant hardware, sensors, actuators, and software have facilitated new research in this area. This book deals with the interdisciplinary aspects of emerging technologies of motion and vibration control for mechanical, civil and aerospace systems. It covers a broad range of applications (e.g. vehicle dynamics, actuators, rotor dynamics, biologically inspired mechanics, humanoid robot dynamics and control, etc.) and also provides advances in the field of fundamental research e.g. control of fluid/structure integration, nonlinear control theory, etc. Each of the contributors is a recognised specialist in his field, and this gives the book relevance and authority in a wide range of areas.

Download or read book Vibration Control of Active Structures written by A. Preumont and published by Springer Science & Business Media. This book was released on 2002-02-28 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: My objective in writing this book was to cross the bridge between the structural dynamics and control communities, while providing an overview of the potential of SMART materials for sensing and actuating purposes in active vibration c- trol. I wanted to keep it relatively simple and focused on systems which worked. This resulted in the following: (i) I restricted the text to fundamental concepts and left aside most advanced ones (i.e. robust control) whose usefulness had not yet clearly been established for the application at hand. (ii) I promoted the use of collocated actuator/sensor pairs whose potential, I thought, was strongly underestimated by the control community. (iii) I emphasized control laws with guaranteed stability for active damping (the wide-ranging applications of the IFF are particularly impressive). (iv) I tried to explain why an accurate pred- tion of the transmission zeros (usually called anti-resonances by the structural dynamicists) is so important in evaluating the performance of a control system. (v) I emphasized the fact that the open-loop zeros are more difficult to predict than the poles, and that they could be strongly influenced by the model trun- tion (high frequency dynamics) or by local effects (such as membrane strains in piezoelectric shells), especially for nearly collocated distributed actuator/sensor pairs; this effect alone explains many disappointments in active control systems.

Download or read book Mechanical Vibration written by Haym Benaroya and published by CRC Press. This book was released on 2017-08-29 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration: Analysis, Uncertainties, and Control, Fourth Edition addresses the principles and application of vibration theory. Equations for modeling vibrating systems are explained, and MATLAB® is referenced as an analysis tool. The Fourth Edition adds more coverage of damping, new case studies, and development of the control aspects in vibration analysis. A MATLAB appendix has also been added to help students with computational analysis. This work includes example problems and explanatory figures, biographies of renowned contributors, and access to a website providing supplementary resources.

Download or read book Vibration Theory and Applications with Finite Elements and Active Vibration Control written by Alan Palazzolo and published by John Wiley & Sons. This book was released on 2016-01-11 with total page 973 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on many years of research and teaching, this book brings together all the important topics in linear vibration theory, including failure models, kinematics and modeling, unstable vibrating systems, rotordynamics, model reduction methods, and finite element methods utilizing truss, beam, membrane and solid elements. It also explores in detail active vibration control, instability and modal analysis. The book provides the modeling skills and knowledge required for modern engineering practice, plus the tools needed to identify, formulate and solve engineering problems effectively.

Download or read book Engineering Dynamics and Vibrations written by Junbo Jia and published by CRC Press. This book was released on 2018-12-12 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering dynamics and vibrations has become an essential topic for ensuring structural integrity and operational functionality in different engineering areas. However, practical problems regarding dynamics and vibrations are in many cases handled without success despite large expenditures. This book covers a wide range of topics from the basics to advances in dynamics and vibrations; from relevant engineering challenges to the solutions; from engineering failures due to inappropriate accounting of dynamics to mitigation measures and utilization of dynamics. It lays emphasis on engineering applications utilizing state-of-the-art information.

Download or read book Structural Dynamics and Vibration in Practice written by Douglas Thorby and published by Butterworth-Heinemann. This book was released on 2008-01-08 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This straightforward text, primer and reference introduces the theoretical, testing and control aspects of structural dynamics and vibration, as practised in industry today. Written by an expert engineer of over 40 years experience, the book comprehensively opens up the dynamic behavior of structures and provides engineers and students with a comprehensive practice based understanding of the key aspects of this key engineering topic. Written with the needs of engineers of a wide range of backgrounds in mind, this book will be a key resource for those studying structural dynamics and vibration at undergraduate level for the first time in aeronautical, mechanical, civil and automotive engineering. It will be ideal for laboratory classes and as a primer for readers returning to the subject, or coming to it fresh at graduate level. It is a guide for students to keep and for practicing engineers to refer to: its worked example approach ensures that engineers will turn to Thorby for advice in many engineering situations. - Presents students and practitioners in all branches of engineering with a unique structural dynamics resource and primer, covering practical approaches to vibration engineering while remaining grounded in the theory of the topic - Written by a leading industry expert, with a worked example lead approach for clarity and ease of understanding - Makes the topic as easy to read as possible, omitting no steps in the development of the subject; covers computer based techniques and finite elements

Download or read book Vibration Control For Optomechanical Systems written by Vyacheslav M Ryaboy and published by World Scientific. This book was released on 2021-11-29 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration presents a major challenge to advanced experiments and technological processes in engineering, physics and life sciences that rely on optics and optoelectronics. This compendium discusses ways in which vibration may affect optical performance and describes methods and means of reducing this impact. Principal methods of vibration control, namely, damping and isolation are highlighted using mathematical models and real-life examples.The unique text covers some topics that are important for optomechanical applications but are lacking in general vibration texts, such as dynamics and stability of elastically supported systems with high centers of gravity, physics of pneumatic isolators, and application of dynamic absorbers to vibration-isolated systems.This useful reference book enables the reader to apply the vibration control tools properly and perform basic analytical and experimental tasks of estimating and verifying their performance. It is also a must-have textbook for undergraduate or graduate-level courses in vibration control and optomechanics.Related Link(s)

Download or read book Spatial Control of Vibration written by S. O. Reza Moheimani and published by World Scientific. This book was released on 2003 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration is a natural phenomenon that occurs in a variety of engineering systems. In many circumstances, vibration greatly affects the nature of engineering design as it often dictates limiting factors in the performance of the system. The conventional treatment is to redesign the system or to use passive damping. The former could be a costly exercise, while the latter is only effective at higher frequencies. Active control techniques have emerged as viable technologies to fill this low-frequency gap. This book is concerned with the study of feedback controllers for vibration control of flexible structures, with a view to minimizing vibration over the entire body of the structure.The book introduces a variety of flexible structures such as beams, strings, and plates with specific boundary conditions, and explains in detail how a spatially distributed model of such systems can be obtained. It addresses the problems of model reduction and model correction for spatially distributed systems of high orders, and goes on to extend robust control techniques such as H-infinity and H2 control design methodologies to spatially distributed systems arising in active vibration control problems. It also addresses other important topics, such as actuator and sensor placement for flexible systems, and system identification for flexible structures with irregular boundary conditions. The text contains numerous examples, and experimental results obtained from laboratory-level apparatus, with details of how similar test beds may be built.

Download or read book Vibration with Control written by Daniel J. Inman and published by John Wiley & Sons. This book was released on 2006-11-02 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers are becoming increasingly aware of the problems caused by vibration in engineering design, particularly in the areas of structural health monitoring and smart structures. Vibration is a constant problem as it can impair performance and lead to fatigue, damage and the failure of a structure. Control of vibration is a key factor in preventing such detrimental results. This book presents a homogenous treatment of vibration by including those factors from control that are relevant to modern vibration analysis, design and measurement. Vibration and control are established on a firm mathematical basis and the disciplines of vibration, control, linear algebra, matrix computations, and applied functional analysis are connected. Key Features: Assimilates the discipline of contemporary structural vibration with active control Introduces the use of Matlab into the solution of vibration and vibration control problems Provides a unique blend of practical and theoretical developments Contains examples and problems along with a solutions manual and power point presentations Vibration with Control is an essential text for practitioners, researchers, and graduate students as it can be used as a reference text for its complex chapters and topics, or in a tutorial setting for those improving their knowledge of vibration and learning about control for the first time. Whether or not you are familiar with vibration and control, this book is an excellent introduction to this emerging and increasingly important engineering discipline.

Download or read book Mechanical Vibrations written by Tomasz Krysinski and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: For all rotational machines, the analysis of dynamic stresses and the resulting vibrations is an important subject. When it comes to helicopters and piston engines, this analysis becomes crucial. From the design of parts working under stress to the reduction of the vibration levels, the success of a project lies mainly in the hands of the dynamicists. The authors have combined their talents and experience to provide a complete presentation on the issues involved. Part one describes, in concrete terms, the main dynamic phenomena and how they can be observed in reality. Part two presents information about the modeling methods required to understand the dynamic phenomena and develop solutions capable of eliminating the most serious effects.