Download or read book Vibration and Coupling of Continuous Systems written by Jacqueline Sanchez Hubert and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real problems concerning vibrations of elastic structures are among the most fascinating topics in mathematical and physical research as well as in applications in the engineering sciences. This book addresses the student familiar with the elementary mechanics of continua along with specialists. The authors start with an outline of the basic methods and lead the reader to research problems of current interest. An exposition of the method of spectra, asymptotic methods and perturbation is followed by applications to linear problems where elastic structures are coupled to fluids in bounded and unbounded domains, to radiation of immersed bodies, to local vibrations, to thermal effects and many more.
Download or read book Vibration of Discrete and Continuous Systems written by Ahmed Shabana and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical engineering, an engineering discipline borne of the needs of the industrial revolution, is once again asked to do its substantial share in the call for industrial renewal. The general call is urgent as we face profound issues of productivity and competitiveness that require engineering solutions, among others. The Mechanical Engineering Series features graduate texts and research monographs intended to address the need for information in con temporary areas of mechanical engineering. The series is conceived as a comprehensive one that covers a broad range of concentrations important to mechanical engineering graduate education and research. We are fortunate to have a distinguished roster of consulting editors on the advisory board, each an expert in one of the areas of concen tration. The names of the consulting editors are listed on the next page of this volume. The areas of concentration are: applied mechanics; bio mechanics; computational mechanics; dynamic systems and control; energetics; mechanics of materials; processing; thermal science; and tribology. Professor Marshek, the consulting editor for dynamic systems and control, and I are pleased to present the second edition of Vibration of Discrete and Continuous Systems by Professor Shabana. We note that this is the second of two volumes. The first deals with the theory of vibration.
Download or read book Vibration of Continuous Systems written by Singiresu S. Rao and published by John Wiley & Sons. This book was released on 2019-03-06 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised and up-to-date guide to advanced vibration analysis written by a noted expert The revised and updated second edition of Vibration of Continuous Systems offers a guide to all aspects of vibration of continuous systems including: derivation of equations of motion, exact and approximate solutions and computational aspects. The author—a noted expert in the field—reviews all possible types of continuous structural members and systems including strings, shafts, beams, membranes, plates, shells, three-dimensional bodies, and composite structural members. Designed to be a useful aid in the understanding of the vibration of continuous systems, the book contains exact analytical solutions, approximate analytical solutions, and numerical solutions. All the methods are presented in clear and simple terms and the second edition offers a more detailed explanation of the fundamentals and basic concepts. Vibration of Continuous Systems revised second edition: Contains new chapters on Vibration of three-dimensional solid bodies; Vibration of composite structures; and Numerical solution using the finite element method Reviews the fundamental concepts in clear and concise language Includes newly formatted content that is streamlined for effectiveness Offers many new illustrative examples and problems Presents answers to selected problems Written for professors, students of mechanics of vibration courses, and researchers, the revised second edition of Vibration of Continuous Systems offers an authoritative guide filled with illustrative examples of the theory, computational details, and applications of vibration of continuous systems.
Download or read book Vibration of Continuous Systems written by Arthur W. Leissa and published by McGraw Hill Professional. This book was released on 2011-04-22 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: IN-DEPTH INFORMATION ON THE VIBRATIONS OF CONTINUOUS SYSTEMS Written by experts in the field, Vibrations of Continuous Systems expalins the vibrational behavior of basic structural components and elements. Several real-world applications in various fields, including acoustics and aerospace, mechanical, civil, and biomedical engineering, are highlighted. The book includes the derivation of the governing equations of motion and emphasizes the interplay between mathematics and physical understanding. Challenging end-of-chapter problems reinforce the concepts presented in this detailed guide. COVERAGE INCLUDES: Transverse vibrations of strings Longitudinal and torsional vibrations of bars Beam vibrations Membrane vibrations Plate vibrations Shell vibrations Vibrations of three-dimensional bodies Vibrations of composite continuous systems
Download or read book Vibrations of Continuous Systems written by Eberhard Brommundt and published by Springer. This book was released on 2014-05-04 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory of Vibration written by A.A. Shabana and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to impart a sound understanding, both physical and mathematical, of the fundamentals of the theory of vibration and its applications. It presents in a simple and systematic manner techniques that can be easily applied to the analysis of vibration of mechanical and structural systems. In this book, an attempt has been made to provide the rational development of the methods of vibration from their foundations and develop the techniques in clearly understandable stages. This is the first volume, entitled "An Introduction", intended for an introductory semester course in the theory of vibration. The solution procedures are explained in details easily understandable by students. The second volume, "Discrete and Continuous Systems", is planned for publication in the fall of 1990.
Download or read book Vibration of Discrete and Continuous Systems written by Ahmed Shabana and published by Springer Nature. This book was released on 2019-10-02 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised, updated textbook adds new focus on computational methods and the importance of vibration theory in computer-aided engineering to fundamental aspects of vibration of discrete and continuous systems covered in the previous two editions of Vibration of Discrete and Continuous Systems. Building on the book’s emphasis on the theory of vibration of mechanical, structural, and aerospace systems, the author’s modifications, including discussion of the sub-structuring and finite element formulations, complete the coverage of topics required for a contemporary, second course following Vibration Theory. The textbook is appropriate for both upper-level undergraduate and graduate courses.
Download or read book Vibrations and Waves in Continuous Mechanical Systems written by Peter Hagedorn and published by John Wiley & Sons. This book was released on 2007-10-22 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of vibrations is of fundamental importance in engineering and technology. Discrete modelling is sufficient to understand the dynamics of many vibrating systems; however a large number of vibration phenomena are far more easily understood when modelled as continuous systems. The theory of vibrations in continuous systems is crucial to the understanding of engineering problems in areas as diverse as automotive brakes, overhead transmission lines, liquid filled tanks, ultrasonic testing or room acoustics. Starting from an elementary level, Vibrations and Waves in Continuous Mechanical Systems helps develop a comprehensive understanding of the theory of these systems and the tools with which to analyse them, before progressing to more advanced topics. Presents dynamics and analysis techniques for a wide range of continuous systems including strings, bars, beams, membranes, plates, fluids and elastic bodies in one, two and three dimensions. Covers special topics such as the interaction of discrete and continuous systems, vibrations in translating media, and sound emission from vibrating surfaces, among others. Develops the reader’s understanding by progressing from very simple results to more complex analysis without skipping the key steps in the derivations. Offers a number of new topics and exercises that form essential steppingstones to the present level of research in the field. Includes exercises at the end of the chapters based on both the academic and practical experience of the authors. Vibrations and Waves in Continuous Mechanical Systems provides a first course on the vibrations of continuous systems that will be suitable for students of continuous system dynamics, at senior undergraduate and graduate levels, in mechanical, civil and aerospace engineering. It will also appeal to researchers developing theory and analysis within the field.
Download or read book Vibration of Discrete and Continuous Systems written by Ahmed A. Shabana and published by . This book was released on 2019 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised, updated textbook adds new focus on computational methods and the importance of vibration theory in computer-aided engineering to fundamental aspects of vibration of discrete and continuous systems covered in the previous two editions of Vibration of Discrete and Continuous Systems. Building on the book's emphasis on the theory of vibration of mechanical, structural, and aerospace systems, the author's modifications, including discussion of the sub-structuring and finite element formulations, complete the coverage of topics required for a contemporary, second course following Vibration Theory. The textbook is appropriate for both upper-level undergraduate and graduate courses. Expands coverage by more than 200 pages over the previous edition; Grounds detail of vibration within discrete and continuous systems with thorough references to the theory of vibration; Explains coverage of computational methods in the vibration analysis; Illustrates the use of the finite element method and sub-structuring techniques in the vibration analysis; Reinforces concepts with over 200 end-of-chapter problems; Facilitates readers' digestion of critical concepts using matrix methods to present some advanced vibration topics in a tractable manner.
Download or read book Vibration in Mechanical Systems written by Cho Wing S. To and published by Cambridge Scholars Publishing. This book was released on 2023-12-15 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the physical background and basic concepts of vibration, mathematical modeling of linear vibrations in discrete and continuous mechanical systems and offers theoretical solutions for vibration problems, and provides dynamical analysis of vibration, engineering applications of vibration. Vibration phenomena exist widely in nature and engineering, and vibration analysis and computation are of important significance in science and in technology. In recent years, great progress has been made in vibration analysis and computation for increasingly complex systems by advances in technology. Therefore, the contents of courses on vibration should be improved and strengthened to meet the requirement of today’s technology education. As an introductory textbook for undergraduate students, this book presents the physical background, mathematical modeling, analytical solutions, mechanical analysis on linear vibrations in both discrete-time and continuous-time systems, as well as some typical examples in engineering application.
Download or read book Vibrations of Continuous Systems written by Eberhard Brommundt and published by . This book was released on 2014-09-01 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Vibration Analysis written by Valery A. Svetlitsky and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Constantly increasing attention is paid in the course 'Vibration 'Theory' to vibration of mechanical systems with distributed parameters, since the real elements of machines, devices, and constructions are made of materials that are not perfectly rigid. 'Therefore, vibrations of the objects including, for ex ample, rod elastic elements excite the vibrations of these elements, which can produce a substantial effect on dynamic characteristics of moving objects and on readings of instruments. For a mechanical engineer working in the field of design of new technolo gies the principal thing is his know-how in developing the sophisticated math ematical models in which all specific features of operation of the objects under design in real conditions are meticulously taken into account. So, the main emphasis in this book is made on the methods of derivation of equations and on the algorithms of solving them (exactly or approximately) taking into con sideration all features of actual behavior of the forces acting upon elastic rod elements. 'The eigen value and eigen vector problems are considered at vibrations of curvilinear rods (including the rods with concentrated masses). Also consid ered are the problems with forced vibrations. When investigating into these problems an approximate method of numerical solution of the systems of lin ear differential equations in partial derivatives is described, which uses the principle of virtual displacements. Some problems are more complicated than others and can be used for practical works of students and their graduation theses.
Download or read book Theory of Vibration written by A.A. Shabana and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to impart a sound understanding, both physical and mathematical, of the fundamental theory of vibration and its applications. The book presents in a simple and systematic manner techniques that can easily be applied to the analysis of vibration of mechanical and structural systems. Unlike other texts on vibrations, the approach is general, based on the conservation of energy and Lagrangian dynamics, and develops specific techniques from these foundations in clearly understandable stages. Suitable for a one-semester course on vibrations, the book presents new concepts in simple terms and explains procedures for solving problems in considerable detail.
Download or read book Theory of Vibration written by Ahmed A. Shabana and published by Springer. This book was released on 2018-10-12 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully revised and updated third edition covers the physical and mathematical fundamentals of vibration analysis, including single degree of freedom, multi-degree of freedom, and continuous systems. A new chapter on special topics that include motion control, impact dynamics, and nonlinear dynamics is added to the new edition. In a simple and systematic manner, the book presents techniques that can easily be applied to the analysis of vibration of mechanical and structural systems. Suitable for a one-semester course on vibrations, the book presents the new concepts in simple terms and explains procedures for solving problems in considerable detail. It contains numerous exercises, examples and end-of-chapter problems.
Download or read book Fundamentals of Noise and Vibration Analysis for Engineers written by M. P. Norton and published by Cambridge University Press. This book was released on 2003-10-16 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noise and Vibration affects all kinds of engineering structures, and is fast becoming an integral part of engineering courses at universities and colleges around the world. In this second edition, Michael Norton's classic text has been extensively updated to take into account recent developments in the field. Much of the new material has been provided by Denis Karczub, who joins Michael as second author for this edition. This book treats both noise and vibration in a single volume, with particular emphasis on wave-mode duality and interactions between sound waves and solid structures. There are numerous case studies, test cases, and examples for students to work through. The book is primarily intended as a textbook for senior level undergraduate and graduate courses, but is also a valuable reference for researchers and professionals looking to gain an overview of the field.
Download or read book Vibration Mechanics written by M. del Pedro and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Objectives This book is used to teach vibratory mechanics to undergraduate engineers at the Swiss Federal Institute of Technology of Lausanne. It is a basic course, at the level of the first university degree, necessary for the proper comprehension of the following disciplines. Vibrations of continuous linear systems (beams, plates) random vibration of linear systems vibrations of non-linear systems dynamics of structures experimental methods, rheological models, etc. Effective teaching methods have been given the highest priority. Thus the book covers basic theories of vibratory mechanics in an ap propriately rigorous and complete way, and is illustrated by nume rous applied examples. In addition to university students, it is suitable for industrial engineers who want to strengthen or complete their training. It has been written so that someone working alone should find it easy to read. pescription The subject of the book is the vibrations of linear mechanical sys tems having only a finite number of degrees of freedom (ie discrete linear systems). These can be divided into the following two catego ries : -X- systems of solids which are considered to be rigid, and which are acted upon by elastic forces and by linear resist.ive forces (viscous damping forces). deformable continuous systems which have been made discrete. In other words, systems which are replaced (approximately) by systems having only a limited number of degrees of freedom, using digital or experimental methods.
Download or read book Mechanical Vibrations written by Tony L. Schmitz and published by Springer Nature. This book was released on 2020-10-29 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in an updated second edition, this classroom-tested textbook describes essential concepts in vibration analysis of mechanical systems.The second edition includes a new chapter on finite element modeling and an updated section on dynamic vibration absorbers, as well as new student exercises in each chapter. It incorporates the required mathematics, experimental techniques, fundamentals of modal analysis, and beam theory into a unified framework that is written to be accessible to undergraduate students, researchers, and practicing engineers. To unify the various concepts, a single experimental platform is used throughout the text to provide experimental data and evaluation. Engineering drawings for the platform are included in an appendix. Additionally, MATLAB programming solutions are integrated into the content throughout the text.The book is ideal for undergraduate students, researchers, and practicing engineers who are interested in developing a more thorough understanding of essential concepts in vibration analysis of mechanical systems. Presents a clear connection between continuous beam models and finite degree of freedom models; Includes MATLAB code to support numerical examples that are integrated into the text narrative; Uses mathematics to support vibrations theory and emphasizes the practical significance of the results.
