Download or read book Variational Methods in Shape Optimization Problems written by Dorin Bucur and published by Springer Science & Business Media. This book was released on 2006-09-13 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape optimization problems are treated from the classical and modern perspectives Targets a broad audience of graduate students in pure and applied mathematics, as well as engineers requiring a solid mathematical basis for the solution of practical problems Requires only a standard knowledge in the calculus of variations, differential equations, and functional analysis Driven by several good examples and illustrations Poses some open questions.
Download or read book Variational methods in some shape optimization problems written by Dorin Bucur and published by Edizioni della Normale. This book was released on 2002-10-01 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of shape optimization problems is a very wide field, both classical, as the isoperimetric problem and Newton problem of the best aerodynamical shape show, and modern, for all the recent results obtained in the last two, three decades. The fascinating feature is that the competing objects are shapes, i.e. domains of Rn, instead of functions, as usually occurs in problems of calculus of variations. This constraint often produces additional difficulties that lead to a lack of existence of a solution and the introduction of suitable relaxed formulations of the problem. However, in a few cases an optimal solution exists, due to the special form of the cost functional and to the geometrical restriction on the class of competing domains. This volume collects the lecture notes of two courses given in the academic year 2000/01 by the authors at the University of Pisa and at the Scuola Normale Superiore respectively. The courses were mainly addressed to Ph. D. students and required a background in the topics in functional analysis that are usually taught in undergraduate courses.
Download or read book Variational Methods for Structural Optimization written by Andrej Cherkaev and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges a gap between a rigorous mathematical approach to variational problems and the practical use of algorithms of structural optimization in engineering applications. The foundations of structural optimization are presented in sufficiently simple form as to make them available for practical use.
Download or read book Shape Optimization Problems written by Hideyuki Azegami and published by Springer Nature. This book was released on 2020-09-30 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides theories on non-parametric shape optimization problems, systematically keeping in mind readers with an engineering background. Non-parametric shape optimization problems are defined as problems of finding the shapes of domains in which boundary value problems of partial differential equations are defined. In these problems, optimum shapes are obtained from an arbitrary form without any geometrical parameters previously assigned. In particular, problems in which the optimum shape is sought by making a hole in domain are called topology optimization problems. Moreover, a problem in which the optimum shape is obtained based on domain variation is referred to as a shape optimization problem of domain variation type, or a shape optimization problem in a limited sense. Software has been developed to solve these problems, and it is being used to seek practical optimum shapes. However, there are no books explaining such theories beginning with their foundations. The structure of the book is shown in the Preface. The theorems are built up using mathematical results. Therefore, a mathematical style is introduced, consisting of definitions and theorems to summarize the key points. This method of expression is advanced as provable facts are clearly shown. If something to be investigated is contained in the framework of mathematics, setting up a theory using theorems prepared by great mathematicians is thought to be an extremely effective approach. However, mathematics attempts to heighten the level of abstraction in order to understand many things in a unified fashion. This characteristic may baffle readers with an engineering background. Hence in this book, an attempt has been made to provide explanations in engineering terms, with examples from mechanics, after accurately denoting the provable facts using definitions and theorems.
Download or read book Variational Methods in Optimization written by Donald R. Smith and published by Courier Corporation. This book was released on 1998-01-01 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highly readable text elucidates applications of the chain rule of differentiation, integration by parts, parametric curves, line integrals, double integrals, and elementary differential equations. 1974 edition.
Download or read book Variational Analysis in Sobolev and BV Spaces written by Hedy Attouch and published by SIAM. This book was released on 2014-10-02 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is an excellent guide for anyone interested in variational analysis, optimization, and PDEs. It offers a detailed presentation of the most important tools in variational analysis as well as applications to problems in geometry, mechanics, elasticity, and computer vision. This second edition covers several new topics: new section on capacity theory and elements of potential theory now includes the concepts of quasi-open sets and quasi-continuity; increased number of examples in the areas of linearized elasticity system, obstacles problems, convection-diffusion, and semilinear equations; new section on mass transportation problems and the Kantorovich relaxed formulation of the Monge problem; new subsection on stochastic homogenization establishes the mathematical tools coming from ergodic theory; and an entirely new and comprehensive chapter (17) devoted to gradient flows and the dynamical approach to equilibria. The book is intended for Ph.D. students, researchers, and practitioners who want to approach the field of variational analysis in a systematic way.
Download or read book Existence and Regularity Results for Some Shape Optimization Problems written by Bozhidar Velichkov and published by Springer. This book was released on 2015-03-21 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: We study the existence and regularity of optimal domains for functionals depending on the spectrum of the Dirichlet Laplacian or of more general Schrödinger operators. The domains are subject to perimeter and volume constraints; we also take into account the possible presence of geometric obstacles. We investigate the properties of the optimal sets and of the optimal state functions. In particular, we prove that the eigenfunctions are Lipschitz continuous up to the boundary and that the optimal sets subject to the perimeter constraint have regular free boundary. We also consider spectral optimization problems in non-Euclidean settings and optimization problems for potentials and measures, as well as multiphase and optimal partition problems.
Download or read book Variational Analysis in Sobolev and BV Spaces written by Hedy Attouch and published by SIAM. This book was released on 2014-10-02 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is an excellent guide for anyone interested in variational analysis, optimization, and PDEs. It offers a detailed presentation of the most important tools in variational analysis as well as applications to problems in geometry, mechanics, elasticity, and computer vision.
Download or read book New Trends in Shape Optimization written by Aldo Pratelli and published by Birkhäuser. This book was released on 2015-12-01 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume reflects “New Trends in Shape Optimization” and is based on a workshop of the same name organized at the Friedrich-Alexander University Erlangen-Nürnberg in September 2013. During the workshop senior mathematicians and young scientists alike presented their latest findings. The format of the meeting allowed fruitful discussions on challenging open problems, and triggered a number of new and spontaneous collaborations. As such, the idea was born to produce this book, each chapter of which was written by a workshop participant, often with a collaborator. The content of the individual chapters ranges from survey papers to original articles; some focus on the topics discussed at the Workshop, while others involve arguments outside its scope but which are no less relevant for the field today. As such, the book offers readers a balanced introduction to the emerging field of shape optimization.
Download or read book Variational Methods written by Maïtine Bergounioux and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-01-11 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a focus on the interplay between mathematics and applications of imaging, the first part covers topics from optimization, inverse problems and shape spaces to computer vision and computational anatomy. The second part is geared towards geometric control and related topics, including Riemannian geometry, celestial mechanics and quantum control. Contents: Part I Second-order decomposition model for image processing: numerical experimentation Optimizing spatial and tonal data for PDE-based inpainting Image registration using phase・amplitude separation Rotation invariance in exemplar-based image inpainting Convective regularization for optical flow A variational method for quantitative photoacoustic tomography with piecewise constant coefficients On optical flow models for variational motion estimation Bilevel approaches for learning of variational imaging models Part II Non-degenerate forms of the generalized Euler・Lagrange condition for state-constrained optimal control problems The Purcell three-link swimmer: some geometric and numerical aspects related to periodic optimal controls Controllability of Keplerian motion with low-thrust control systems Higher variational equation techniques for the integrability of homogeneous potentials Introduction to KAM theory with a view to celestial mechanics Invariants of contact sub-pseudo-Riemannian structures and Einstein・Weyl geometry Time-optimal control for a perturbed Brockett integrator Twist maps and Arnold diffusion for diffeomorphisms A Hamiltonian approach to sufficiency in optimal control with minimal regularity conditions: Part I Index
Download or read book Introduction to Shape Optimization written by J. Haslinger and published by SIAM. This book was released on 2003-01-01 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: The efficiency and reliability of manufactured products depend on, among other things, geometrical aspects; it is therefore not surprising that optimal shape design problems have attracted the interest of applied mathematicians and engineers. This self-contained, elementary introduction to the mathematical and computational aspects of sizing and shape optimization enables readers to gain a firm understanding of the theoretical and practical aspects so they may confidently enter this field. Introduction to Shape Optimization: Theory, Approximation, and Computation treats sizing and shape optimization comprehensively, covering everything from mathematical theory (existence analysis, discretizations, and convergence analysis for discretized problems) through computational aspects (sensitivity analysis, numerical minimization methods) to industrial applications. Applications include contact stress minimization for elasto-plastic bodies, multidisciplinary optimization of an airfoil, and shape optimization of a dividing tube. By presenting sizing and shape optimization in an abstract way, the authors are able to use a unified approach in the mathematical analysis for a large class of optimization problems in various fields of physics. Audience: the book is written primarily for students of applied mathematics, scientific computing, and mechanics. Most of the material is directed toward graduate students, although a portion of it is suitable for senior undergraduate students. Readers are assumed to have some knowledge of partial differential equations and their numerical solution, as well as modern programming language such as C++ Fortran 90.
Download or read book Lagrange Multiplier Approach to Variational Problems and Applications written by Kazufumi Ito and published by SIAM. This book was released on 2008-11-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analyses Lagrange multiplier theory and demonstrates its impact on the development of numerical algorithms for variational problems in function spaces.
Download or read book Introduction to Shape Optimization written by Jan Sokolowski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is motivated largely by a desire to solve shape optimization prob lems that arise in applications, particularly in structural mechanics and in the optimal control of distributed parameter systems. Many such problems can be formulated as the minimization of functionals defined over a class of admissible domains. Shape optimization is quite indispensable in the design and construction of industrial structures. For example, aircraft and spacecraft have to satisfy, at the same time, very strict criteria on mechanical performance while weighing as little as possible. The shape optimization problem for such a structure consists in finding a geometry of the structure which minimizes a given functional (e. g. such as the weight of the structure) and yet simultaneously satisfies specific constraints (like thickness, strain energy, or displacement bounds). The geometry of the structure can be considered as a given domain in the three-dimensional Euclidean space. The domain is an open, bounded set whose topology is given, e. g. it may be simply or doubly connected. The boundary is smooth or piecewise smooth, so boundary value problems that are defined in the domain and associated with the classical partial differential equations of mathematical physics are well posed. In general the cost functional takes the form of an integral over the domain or its boundary where the integrand depends smoothly on the solution of a boundary value problem.
Download or read book Control Systems and Mathematical Methods in Economics written by Gustav Feichtinger and published by Springer. This book was released on 2018-06-08 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the days of Lev Pontryagin and his associates, the discipline of Optimal Control has enjoyed a tremendous upswing – not only in terms of its mathematical foundations, but also with regard to numerous fields of application, which have given rise to highly active research areas. Few scholars, however, have been able to make contributions to both the mathematical developments and the (socio-)economic applications; Vladimir Veliov is one of them. In the course of his scientific career, he has contributed highly influential research on mathematical aspects of Optimal Control Theory, as well as applications in Economics and Operations Research. One of the hallmarks of his research is its impressive breadth. This volume, published on the occasion of his 65th birthday, accurately reflects that diversity. The mathematical aspects covered include stability theory for difference inclusions, metric regularity, generalized duality theory, the Bolza problem from a functional analytic perspective, and fractional calculus. In turn, the book explores various applications of control theory, such as population dynamics, population economics, epidemiology, optimal growth theory, resource and energy economics, environmental management, and climate change. Further topics include optimal liquidity, dynamics of the firm, and wealth inequality.
Download or read book Optimization and Control for Partial Differential Equations written by Roland Herzog and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-03-07 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights new developments in the wide and growing field of partial differential equations (PDE)-constrained optimization. Optimization problems where the dynamics evolve according to a system of PDEs arise in science, engineering, and economic applications and they can take the form of inverse problems, optimal control problems or optimal design problems. This book covers new theoretical, computational as well as implementation aspects for PDE-constrained optimization problems under uncertainty, in shape optimization, and in feedback control, and it illustrates the new developments on representative problems from a variety of applications.
Download or read book Handbook of Variational Methods for Nonlinear Geometric Data written by Philipp Grohs and published by Springer Nature. This book was released on 2020-04-03 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers different, current research directions in the context of variational methods for non-linear geometric data. Each chapter is authored by leading experts in the respective discipline and provides an introduction, an overview and a description of the current state of the art. Non-linear geometric data arises in various applications in science and engineering. Examples of nonlinear data spaces are diverse and include, for instance, nonlinear spaces of matrices, spaces of curves, shapes as well as manifolds of probability measures. Applications can be found in biology, medicine, product engineering, geography and computer vision for instance. Variational methods on the other hand have evolved to being amongst the most powerful tools for applied mathematics. They involve techniques from various branches of mathematics such as statistics, modeling, optimization, numerical mathematics and analysis. The vast majority of research on variational methods, however, is focused on data in linear spaces. Variational methods for non-linear data is currently an emerging research topic. As a result, and since such methods involve various branches of mathematics, there is a plethora of different, recent approaches dealing with different aspects of variational methods for nonlinear geometric data. Research results are rather scattered and appear in journals of different mathematical communities. The main purpose of the book is to account for that by providing, for the first time, a comprehensive collection of different research directions and existing approaches in this context. It is organized in a way that leading researchers from the different fields provide an introductory overview of recent research directions in their respective discipline. As such, the book is a unique reference work for both newcomers in the field of variational methods for non-linear geometric data, as well as for established experts that aim at to exploit new research directions or collaborations. Chapter 9 of this book is available open access under a CC BY 4.0 license at link.springer.com.
Download or read book Optimal Transportation and Applications written by Luigi Ambrosio and published by Springer Science & Business Media. This book was released on 2003-06-12 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leading researchers in the field of Optimal Transportation, with different views and perspectives, contribute to this Summer School volume: Monge-Ampère and Monge-Kantorovich theory, shape optimization and mass transportation are linked, among others, to applications in fluid mechanics granular material physics and statistical mechanics, emphasizing the attractiveness of the subject from both a theoretical and applied point of view. The volume is designed to become a guide to researchers willing to enter into this challenging and useful theory.