Download or read book Dynamics of Mechanical Systems with Variable Mass written by Hans Irschik and published by Springer. This book was released on 2014-10-16 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents up-to-date and unifying formulations for treating dynamics of different types of mechanical systems with variable mass. The starting point is overview of the continuum mechanics relations of balance and jump for open systems from which extended Lagrange and Hamiltonian formulations are derived. Corresponding approaches are stated at the level of analytical mechanics with emphasis on systems with a position-dependent mass and at the level of structural mechanics. Special emphasis is laid upon axially moving structures like belts and chains and on pipes with an axial flow of fluid. Constitutive relations in the dynamics of systems with variable mass are studied with particular reference to modeling of multi-component mixtures. The dynamics of machines with a variable mass are treated in detail and conservation laws and the stability of motion will be analyzed. Novel finite element formulations for open systems in coupled fluid and structural dynamics are presented.
Download or read book Dynamics of Machines with Variable Mass written by L Cveticanin and published by CRC Press. This book was released on 1998-10-21 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to be a complete and integrated text on the dynamic properties of machines, mechanisms, and rotors with variable mass, this book presents new results from investigations based on the general dynamics of systems with variable parameters. The book considers both weak and strong nonlinear vibrations of these systems, and chaotic phenomena are also discussed. The conservation laws and adiabatic invariants for systems with variable mass are formulated and the stability and instability conditions of motion are defined.
Download or read book Dynamics of Machines with Variable Mass written by L Cveticanin and published by Routledge. This book was released on 2022-02-13 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to be a complete and integrated text on the dynamic properties of machines, mechanisms, and rotors with variable mass, this book presents new results from investigations based on the general dynamics of systems with variable parameters. The book considers both weak and strong nonlinear vibrations of these systems, and chaotic phenomena are also discussed. The conservation laws and adiabatic invariants for systems with variable mass are formulated and the stability and instability conditions of motion are defined.
Download or read book Attitude Motions of Spaced based Variable Mass Systems written by Tai-Chien Mao and published by . This book was released on 1996 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book System Dynamics for Engineering Students written by Nicolae Lobontiu and published by Academic Press. This book was released on 2017-08-29 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering system dynamics focuses on deriving mathematical models based on simplified physical representations of actual systems, such as mechanical, electrical, fluid, or thermal, and on solving these models for analysis or design purposes. System Dynamics for Engineering Students: Concepts and Applications features a classical approach to system dynamics and is designed to be utilized as a one-semester system dynamics text for upper-level undergraduate students with emphasis on mechanical, aerospace, or electrical engineering. It is the first system dynamics textbook to include examples from compliant (flexible) mechanisms and micro/nano electromechanical systems (MEMS/NEMS). This new second edition has been updated to provide more balance between analytical and computational approaches; introduces additional in-text coverage of Controls; and includes numerous fully solved examples and exercises. - Features a more balanced treatment of mechanical, electrical, fluid, and thermal systems than other texts - Introduces examples from compliant (flexible) mechanisms and MEMS/NEMS - Includes a chapter on coupled-field systems - Incorporates MATLAB® and Simulink® computational software tools throughout the book - Supplements the text with extensive instructor support available online: instructor's solution manual, image bank, and PowerPoint lecture slides NEW FOR THE SECOND EDITION - Provides more balance between analytical and computational approaches, including integration of Lagrangian equations as another modelling technique of dynamic systems - Includes additional in-text coverage of Controls, to meet the needs of schools that cover both controls and system dynamics in the course - Features a broader range of applications, including additional applications in pneumatic and hydraulic systems, and new applications in aerospace, automotive, and bioengineering systems, making the book even more appealing to mechanical engineers - Updates include new and revised examples and end-of-chapter exercises with a wider variety of engineering applications
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1993 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics of Bodies with Time Variable Mass written by Livija Cveticanin and published by Springer. This book was released on 2015-07-31 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the problem of dynamics of bodies with time-variable mass and moment of inertia. Mass addition and mass separation from the body are treated. Both aspects of mass variation, continual and discontinual, are considered. Dynamic properties of the body are obtained applying principles of classical dynamics and also analytical mechanics. Advantages and disadvantages of both approaches are discussed. Dynamics of constant body is adopted, and the characteristics of the mass variation of the body is included. Special attention is given to the influence of the reactive force and the reactive torque. The vibration of the body with variable mass is presented. One and two degrees of freedom oscillators with variable mass are discussed. Rotors and the Van der Pol oscillator with variable mass are displayed. The chaotic motion of bodies with variable mass is discussed too. To support learning, some solved practical problems are included.
Download or read book System Dynamics written by Karl A. Seeler and published by Springer. This book was released on 2014-08-26 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique textbook takes the student from the initial steps in modeling a dynamic system through development of the mathematical models needed for feedback control. The generously-illustrated, student-friendly text focuses on fundamental theoretical development rather than the application of commercial software. Practical details of machine design are included to motivate the non-mathematically inclined student.
Download or read book Planning and Design of Engineering Systems written by Graeme Dandy and published by CRC Press. This book was released on 2018-04-17 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing students with a commonsense approach to the solution of engineering problems and packed full of practical case studies to illustrate the role of the engineer, the type of work involved and the methodologies employed in engineering practice, this textbook is a comprehensive introduction to the scope and nature of engineering. It outlines a conceptual framework for undertaking engineering projects then provides a range of techniques and tools for solving the sorts of problems that commonly arise. Focusing in particular on civil engineering design, problem solving, and the range of techniques and tools it employs, the authors also explore: creativity and problem solving, social and environmental issues, management, communications and law, and ethics the planning, design, modelling and analysis phases and the implementation or construction phase. Designed specifically for introductory courses on undergraduate engineering programs, this extensively revised and extended second edition is an invaluable resource for all new engineering undergraduates as well as non-specialist readers who are seeking information on the nature of engineering work and how it is carried out.
Download or read book Engineering System Dynamics written by Forbes T. Brown and published by CRC Press. This book was released on 2001-08-17 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt: With over 1000 references, tables, equations, and illustrations, this reference covers design-motivated modeling and analysis of systems with mechanical, fluid, electrical, thermodynamic, or hybrid components. Creating effective models based on Paynterian bond graphs and constitutive characteristics, it provides case studies, guided problems, numbered and highlighted examples, and numerous assignable problems in every chapter. Offering extensive developments of conventional linear methods, an introduction to automatic control, and the approach of classical vibrations, the author employs a step-by-step pedagogy that makes advanced techniques accessible to introductory courses.
Download or read book Books and Pamphlets Including Serials and Contributions to Periodicals written by Library of Congress. Copyright Office and published by . This book was released on 1973 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Systems written by Craig A. Kluever and published by John Wiley & Sons. This book was released on 2020-06-23 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The simulation of complex, integrated engineering systems is a core tool in industry which has been greatly enhanced by the MATLAB® and Simulink® software programs. The second edition of Dynamic Systems: Modeling, Simulation, and Control teaches engineering students how to leverage powerful simulation environments to analyze complex systems. Designed for introductory courses in dynamic systems and control, this textbook emphasizes practical applications through numerous case studies—derived from top-level engineering from the AMSE Journal of Dynamic Systems. Comprehensive yet concise chapters introduce fundamental concepts while demonstrating physical engineering applications. Aligning with current industry practice, the text covers essential topics such as analysis, design, and control of physical engineering systems, often composed of interacting mechanical, electrical, and fluid subsystem components. Major topics include mathematical modeling, system-response analysis, and feedback control systems. A wide variety of end-of-chapter problems—including conceptual problems, MATLAB® problems, and Engineering Application problems—help students understand and perform numerical simulations for integrated systems.
Download or read book The Shock and Vibration Bulletin written by and published by . This book was released on 1986 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Orbital Mechanics for Engineering Students written by Howard D. Curtis and published by Elsevier. This book was released on 2009-10-26 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Orbital Mechanics for Engineering Students, Second Edition, provides an introduction to the basic concepts of space mechanics. These include vector kinematics in three dimensions; Newton's laws of motion and gravitation; relative motion; the vector-based solution of the classical two-body problem; derivation of Kepler's equations; orbits in three dimensions; preliminary orbit determination; and orbital maneuvers. The book also covers relative motion and the two-impulse rendezvous problem; interplanetary mission design using patched conics; rigid-body dynamics used to characterize the attitude of a space vehicle; satellite attitude dynamics; and the characteristics and design of multi-stage launch vehicles. Each chapter begins with an outline of key concepts and concludes with problems that are based on the material covered. This text is written for undergraduates who are studying orbital mechanics for the first time and have completed courses in physics, dynamics, and mathematics, including differential equations and applied linear algebra. Graduate students, researchers, and experienced practitioners will also find useful review materials in the book. - NEW: Reorganized and improved discusions of coordinate systems, new discussion on perturbations and quarternions - NEW: Increased coverage of attitude dynamics, including new Matlab algorithms and examples in chapter 10 - New examples and homework problems
Download or read book Advanced Multibody System Dynamics written by Werner Schiehlen and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The German Research Council (DFG) decided 1987 to establish a nationwide five year research project devoted to dynamics of multibody systems. In this project universities and research centers cooperated with the goal to develop a general pur pose multibody system software package. This concept provides the opportunity to use a modular structure of the software, i.e. different multibody formalisms may be combined with different simulation programmes via standardized interfaces. For the DFG project the database RSYST was chosen using standard FORTRAN 77 and an object oriented multibody system datamodel was defined. The project included • research on the fundamentals of the method of multibody systems, • concepts for new formalisms of dynamical analysis, • development of efficient numerical algorithms and • realization of a powerful software package of multibody systems. These goals required an interdisciplinary cooperation between mathematics, compu ter science, mechanics, and control theory. ix X After a rigorous reviewing process the following research institutions participated in the project (under the responsibility of leading scientists): Technical University of Aachen (Prof. G. Sedlacek) Technical University of Darmstadt (Prof. P. Hagedorn) University of Duisburg M. Hiller) (Prof.
Download or read book Modeling of Dynamic Systems with Engineering Applications written by Clarence W. de Silva and published by CRC Press. This book was released on 2022-07-27 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides cutting-edge insight into systems dynamics for both students and practicing engineers. Updated throughout for the second edition, this book serves as a firm foundation to develop expertise in design, prototyping, control, instrumentation, experimentation, and performance analysis. Providing a clear discussion of system dynamics, this book enables students and professionals to both understand and subsequently model mechanical, thermal, fluid, electrical, and multi-domain (or, multi-physics) systems in a systematic, unified, and integrated manner. Concepts of through and across-variables, are introduced and applied, alongside tools of modeling and model representation in linear graphs. This book uses innovative worked examples and case studies, alongside problems and exercises based on practical situations. This book is a crucial companion to undergraduate and postgraduate engineering students, alongside professionals in the engineering field. Complete solutions to end-of-chapter problems are provided in a solutions manual, which is available to instructors.
Download or read book Catalog of Copyright Entries Third Series written by Library of Congress. Copyright Office and published by Copyright Office, Library of Congress. This book was released on 1973 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt:
