Download or read book Valves and Valve Gears Vol 1 2nd Ed written by F. de R. Furman and published by . This book was released on 1915 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Valves and Valve Gears Vol 1 written by Franklin Deronde Furman and published by Forgotten Books. This book was released on 2017-10-25 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Valves and Valve Gears, Vol. 1: Steam Engines and Steam Turbines Much Of the material in this work has been arranged after ex tended visits to drafting rooms in which the work in valve gears was being carried on in a practical way, and it is believed that the methods here presented will be found to agree fairly well with general practice. In writing up the descriptions Of the practical forms of valves and valve gears the author has received numerous courtesies from manufacturers which are hereby acknowledged. It has been the rule to have the manufacturer Of the valve or gear or engine described to pass finally on the accuracy Of the description and Of the illustrations that appear in this work. Every illustration has been newly prepared for this edition. In order to avoid the use of subscripts in numbering the illustrations and paragraphs as the work Of preparation proceeded, and as changes and additions were made, the author laid out the work originally by leaving ten numbers free at the end Of each section. It will be found that these numbers have been all used at the end Of some of the sections and that none have been used at the end Of other sections. The page numbers, however, are in consecutive order throughout the book. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Valves and Valve Gears Volume 1 Steam Engines and Steam Turbines Second Edition Etc written by Franklin DeRonde FURMAN and published by . This book was released on 1915 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Valves and Valve Gears written by Franklin De Ronde Furman and published by . This book was released on 1915 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Valves and Valve Gear Mechanisms written by William Ernest Dalby and published by . This book was released on 1906 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Valves and Valve Gears written by Franklin DeRonde Furman and published by . This book was released on 1923 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Valves and Valve Gears written by Franklin De Ronde Furman and published by . This book was released on 1915 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Valves Valve gears Valve Diagrams written by Franklin De Ronde Furman and published by . This book was released on 1911 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Valves and Valve Gears written by Franklin De Ronde Furman and published by . This book was released on 1915 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Valves and Valve Gear Mechanisms Classic Reprint written by William Ernest Dalby and published by Forgotten Books. This book was released on 2017-06-09 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Valves and Valve Gear Mechanisms The scope of this volume is limited to an examination of types of those gears in which there is one, and only one, position of the valve for a given position of the crank. In other words, the position of the valve is a function of a single variable only, namely the crank angle. A few gears are however described incidentally in which a governor is included in the mechanism operating the valve. In this case there is more than one position of the valve for a given position of the crank. The valve position is, in fact, a function of two variables, namely the crank angle and the time, and the valve position cannot be set out on a drawing from kinematic considerations alone. The proper examination of gears of this kind requires a study of the dynamics of governors, and this is not included in the present volume. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Valves and Valve Gears Vol 2 written by Franklin Deronde Furman and published by Forgotten Books. This book was released on 2017-07-18 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Valves and Valve Gears, Vol. 2: Gasoline, Gas, and Oil Engines The part of this work on Valves and Valve Gears which relates to internal combustion engines is printed as a separate volume in order to meet the requirements Of varying courses of study, and the needs of those generally who are interested only in gasoline, gas, or Oil engines. This will enable those who wish to study particular cases to do so without being encumbered with literature relating to the steam engine when only matter concerning the internal combustion engine is desired, or vice versa. Those who wish to make a general study Of the methods of oper ating the several types Of internal combustion engines should first study Sections III and IV Of Volume I of this work. In these sec tions it is shown that seven fundamental valve forms underlie all valves in general use, and that six fundamental mechanisms, with their variations, underlie all valve gears whether applied to internal combustion engines or to steam engines. An understanding Of how the whole subject of valves and valve gears for all prime movers can be reduced to so few fundamental forms should materially aid in obtaining a grasp Of the subject as it is applied, in the present volume, to practical gasoline, gas, and Oil engines. The preface given in Volume I applies to this work on Valves and Valve Gears as a whole, and the comments and acknowledgments there made refer to this second volume as well as to the first. It is. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Valves Valve Gears and Valve Diagrams written by Franklin Der; Furman and published by Forgotten Books. This book was released on 2015-06-11 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Valves, Valve-Gears and Valve Diagrams About eight years ago the author prepared a set of Notes on this subject and they have since been regularly issued and revised every one or two years in neostyle form. This method of issuing notes is admirable for the purpose of making revisions that appear to be desirable after a course in the class room, and the author would be reluctant to abandon this advantage were it not that the well-established points of the subject in general appear to be in such shape that very little revision has seemed necessary the past few years. On account of the fact that about twenty per cent. of new material, both in text and illustrations, has been added this summer in the preparation for this book, the author feels that there may be some revision of this new matter desirable after it has been tried out in the class room, and has, therefore, decided to publish the book privately and in small editions until, at least, this new part of the subject shall become as settled as the older part. A further prompting for issuing these notes in book form is the fact that during the past few years there has been a small scattered call from graduates who have not kept or have lost their loose-sheet notes, and also a call from outsiders. Books are more satisfactory in meeting such cases. Notes on this subject at Stevens Institute were started by Professor Jacobus, and continued by Professors Anderson and Pryor, until the subject came into the writer's hands in 1903. The work thus started was part of a more general course in engine work and consisted principally of notes leading up to the drafting-room course, covering eight problems which are now given at pages 17, 28, 50, 54, 64, 82, 98 and 116. Of these problems, four, comprising the double-ported, Meyer, Corliss and floating valves, have been either largely revised or entirely changed. The material in this book, aside from the drafting-room problems, has been arranged for classroom and recitation work after extended visits to drafting rooms in which the work in the design of valves and valve gears was being carried on in a practical way, and it is believed that the methods here presented will be found to agree fairly well with general practice. While an arrangement of material that would best fit in with the general course of mechanical engineering at Stevens Institute has been the principal aim of the author in presenting this work, and while many suggestions from numerous sources, including the works of Zeuner, Bilgram, Auchincloss, Welch, Halsey, Peabody, Spangler and Begtrup, have been adopted, there have been introduced some features that have been original in their conception so far as is known to the writer. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Valves and Valve gearing written by Charles Hurst and published by . This book was released on 1907 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Valves and Valve Gears by Franklin De Ronde Furman written by Franklin De Ronde Furman and published by . This book was released on 1915 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Valve Gears and Indicators written by American School (Lansing, Ill.) and published by . This book was released on 1908 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Locomotive Valves and Valve Gears with a Special Treatise on Valve Setting written by Jacob Herbert Yoder and published by . This book was released on 1917 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Valves Valve Gears and Valve Diagrams Classic Reprint written by Franklin Der Furman and published by Forgotten Books. This book was released on 2017-09-15 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Valves, Valve-Gears and Valve Diagrams The material in this book, aside from the drafting-room problems, has been arranged for class room and recitation work after extended visits to drafting rooms in which the work in the design of valves and valve gears was being carried on in a practical way, and it is believed that the methods here presented will be found to agree fairly well with general practice. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
