Download or read book Validation of Numerical Simulations by 3D Scanning written by Samir Lemeš and published by LAP LAMBERT Academic Publishing. This book was released on 2012-02-15 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: Validation is the subjective process that determines the accuracy with which the mathematical model describes the actual physical phenomenon. This research was conducted in order to validate the use of finite element analysis for springback compensation in 3D scanning of sheet metal objects. The measurement uncertainty analysis was used to compare the digitized 3D model of deformed sheet metal product with the 3D model obtained by simulated deformation. The influence factors onto 3D scanning and numerical simulation processes are identified and analyzed. It is shown that major contribution to measurement uncertainty comes from scanning method and deviations of parts due to manufacturing technology. The analysis results showed that numerical methods, such as finite element method, can successfully be used in computer-aided quality control and automated inspection of manufactured parts.
Download or read book Validation of Numerical Simulations by Digital Scanning of 3D Sheet Metal Objects written by Samir Lemeš and published by Univerza v Ljubljani, Fakulteta za strojništvo. This book was released on 2010-06-23 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Validation is the subjective process that determines the accuracy with which the mathematical model describes the actual physical phenomenon. This research was conducted in order to validate the use of finite element analysis for springback compensation in 3D scanning of sheet metal objects. The measurement uncertainty analysis was used to compare the digitized 3D model of deformed sheet metal product with the 3D model obtained by simulated deformation. The influence factors onto 3D scanning and numerical simulation processes are identified and analysed. It is shown that major contribution to measurement uncertainty comes from scanning method and deviations of parts due to manufacturing technology. The analysis results showed that numerical methods, such as finite element method, can successfully be used in computer aided quality control and automated inspection of manufactured parts.
Download or read book Recommended Values of Thermophysical Properties for Selected Commercial Alloys written by K. C. Mills and published by Woodhead Publishing. This book was released on 2002 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Laboratory Testing and Modelling of Soils and Shales ATMSS written by Alessio Ferrari and published by Springer. This book was released on 2017-01-16 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this spirit, the ATMSS International Workshop “Advances in Laboratory Testing & Modelling of Soils and Shales” (Villars-sur-Ollon, Switzerland; 18-20 January 2017) has been organized to promote the exchange of ideas, experience and state of the art among major experts active in the field of experimental testing and modelling of soils and shales. The Workshop has been organized under the auspices of the Technical Committees TC-101 “Laboratory Testing”, TC-106 “Unsaturated Soils” and TC-308 “Energy Geotechnics” of the International Society of Soil Mechanics and Geotechnical Engineering. This volume contains the invited keynote and feature lectures, as well as the papers that have been presented at the Workshop. The topics of the lectures and papers cover a wide range of theoretical and experimental research, including unsaturated behaviour of soils and shales, multiphysical testing of geomaterials, hydro–mechanical behaviour of shales and stiff clays, the geomechanical behaviour of the Opalinus Clay shale, advanced laboratory testing for site characterization and in–situ applications, and soil – structure interactions.
Download or read book Advances and applications of artificial intelligence and numerical simulation in risk emergency management and treatment written by Yunhui Zhang and published by Frontiers Media SA. This book was released on 2023-07-24 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Active Origami written by Edwin A. Peraza Hernandez and published by Springer. This book was released on 2018-07-12 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Origami structures have the ability to be easily fabricated from planar forms, enable the deployment of large structures from small volumes, and are potentially reconfigurable. These characteristics have led to an increased interest in theoretical and computational origami among engineers from across the world. In this book, the principles of origami, active materials, and solid mechanics are combined to present a full theory for origami structures. The focus is on origami structures morphed via active material actuation and formed from sheets of finite thickness. The detailed theoretical derivations and examples make this an ideal book for engineers and advanced students who aim to use origami principles to develop new applications in their field.
Download or read book Geological Records of Tsunamis and Other Extreme Waves written by Max Engel and published by Elsevier. This book was released on 2020-07-25 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geological Records of Tsunamis and Other Extreme Waves provides a systematic compendium with concise chapters on the concept and history of paleotsunami research, sediment types and sediment sources, field methods, sedimentary and geomorphological characteristics, as well as dating and modeling approaches. By contrasting tsunami deposits with those of competing mechanisms in the coastal zone such as storm waves and surges, and by embedding this field of research into the wider context of tsunami science, the book is also relevant to readers interested in paleotempestology, coastal sedimentary environments, or sea-level changes, and coastal hazard management. The effectiveness of paleotsunami records in coastal hazard-mitigation strategies strongly depends on the appropriate selection of research approaches and methods that are tailored to the site-specific environment and age of the deposits. In addition to summarizing the state-of-the-art in tsunami sedimentology, Geological Records of Tsunamis and Other Extreme Waves guides researchers through establishing an appropriate research design and how to develop reliable records of prehistoric events using field-based and laboratory methods, as well as modeling techniques. - Features a comprehensive overview of the state of the art in tsunami sedimentology and paleotsunami research - Offers advice on the most appropriate mapping, sampling, and analytical approaches for a wide variety of coastal settings and sedimentary environments - Provides methodological details for field sampling and the most important proxy analyses
Download or read book Advances in Water Resources Engineering written by Chih Ted Yang and published by Springer. This book was released on 2014-12-06 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Advances in Water Resources Engineering, Volume 14, covers the topics on watershed sediment dynamics and modeling, integrated simulation of interactive surface water and groundwater systems, river channel stabilization with submerged vanes, non-equilibrium sediment transport, reservoir sedimentation, and fluvial processes, minimum energy dissipation rate theory and applications, hydraulic modeling development and application, geophysical methods for assessment of earthen dams, soil erosion on upland areas by rainfall and overland flow, geofluvial modeling methodologies and applications, and environmental water engineering glossary.
Download or read book NUMISHEET 2022 written by Kaan Inal and published by Springer Nature. This book was released on 2022-06-30 with total page 941 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NUMISHEET conference series is the most significant international conference on the area of the numerical simulation of sheet metal forming processes. It gathers the most prominent experts in numerical methods in sheet forming processes and is an outstanding forum for the exchange of ideas and for the discussion of technologies related to sheet metal forming processes. Topics covered in this volume include but are not limited to the following: Materials Modeling and Experimental Testing Methods Friction and Contact Formability, Necking, and Fracture Instabilities and Surface Defects Fracture and Damage Numerical Methods Springback Incremental Sheet Forming Roll Forming Innovative Forming Methods Product and Process Design and Optimization
Download or read book Medical Simulation written by Dimitris Metaxas and published by Springer Science & Business Media. This book was released on 2004-06-11 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the written contributions to the International Symposium on th Medical Simulation (ISMS’04) held in Cambridge, Massachusetts, USA on June 17 th and June 18 , 2004. Manuscripts are organized around five thematic sections relating to the multidisciplinary field of Medical Simulation: Soft Tissue Properties and Modeling, Haptic Rendering, Real-Time Deformable Models, Anatomical Modeling, and Development Frameworks. The objectives of the symposium are to gather researchers to present their most recent, and promising work, to highlight research trends and foster dialogue and debates among participants. Live demonstrations are also included at the meeting, but cannot be included in this volume. Finally, to address questions about areas for improvement and future directions of the field, we organized a panel of experts including technical, medical and educational representatives. This event continues the successful symposium organized by Hervé Delingette and Nicholas Ayache, in France in June 2003. At that meeting we agreed that it would be beneficial for the community to have an annual gathering for the medical simulation community where researchers can exchange ideas and share their work in this emerging field. ISMS’04 is co-organized by CIMIT / Harvard Medical School and Rutgers University.
Download or read book Proceedings of the RILEM International Symposium on Bituminous Materials written by Hervé Di Benedetto and published by Springer Nature. This book was released on 2021-09-25 with total page 1806 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in bituminous materials and structures and asphalt pavement technology, as presented by leading international researchers and engineers at the RILEM International Symposium on Bituminous Materials (ISBM), held in Lyon, France on December 14-16, 2020. The symposium represents a joint effort of three RILEM Technical Committees from Cluster F: 264-RAP “Asphalt Pavement Recycling”, 272-PIM “Phase and Interphase Behaviour of Bituminous Materials”, and 278-CHA “Crack-Healing of Asphalt Pavement Materials”. It covers a diverse range of topics concerning bituminous materials (bitumen, mastics, mixtures) and road, railway and airport pavement structures, including: recycling, phase and interphase behaviour, cracking and healing, modification and innovative materials, durability and environmental aspects, testing and modelling, multi-scale properties, surface characteristics, structure performance, modelling and design, non-destructive testing, back-analysis, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster new multidisciplinary collaborations.
Download or read book Guided Waves in Structures for SHM written by Wieslaw Ostachowicz and published by John Wiley & Sons. This book was released on 2011-12-30 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding and analysing the complex phenomena related to elastic wave propagation has been the subject of intense research for many years and has enabled application in numerous fields of technology, including structural health monitoring (SHM). In the course of the rapid advancement of diagnostic methods utilising elastic wave propagation, it has become clear that existing methods of elastic wave modeling and analysis are not always very useful; developing numerical methods aimed at modeling and analysing these phenomena has become a necessity. Furthermore, any methods developed need to be verified experimentally, which has become achievable with the advancement of measurement methods utilising laser vibrometry. Guided Waves in Structures for SHM reports on the simulation, analysis and experimental investigation related propagation of elastic waves in isotropic or laminated structures. The full spectrum of theoretical and practical issues associated with propagation of elastic waves is presented and discussed in this one study. Key features: Covers both numerical and experimental aspects of modeling, analysis and measurement of elastic wave propagation in structural elements formed from isotropic or composite materials Comprehensively discusses the application of the Spectral Finite Element Method for modelling and analysing elastic wave propagation in diverse structural elements Presents results of experimental measurements employing advanced laser technologies, validating the quality and correctness of the developed numerical models Accompanying website (www.wiley.com/go/ostachowicz) contains demonstration versions of commercial software developed by the authors for modelling and analyzing elastic wave propagation using the Spectral Finite Element Method Guided Waves in Structures for SHM provides a state of the art resource for researchers and graduate students in structural health monitoring, signal processing and structural dynamics. This book should also provide a useful reference for practising engineers within structural health monitoring and non-destructive testing.
Download or read book Progress in Digital and Physical Manufacturing written by Henrique A. Almeida and published by Springer Nature. This book was released on 2019-09-28 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected papers from the First International Conference on Progress in Digital and Physical Manufacturing (ProDPM'19), organized by the School of Technology and Management (ESTG) of the Polytechnic Institute of Leiria (IPL). It presents a significant contribution to the current advances in digital and physical manufacturing issues as it contains topical research in this field. The book content is of interest to those working on digital and physical manufacturing, promoting better links between the academia and the industry. The conference papers cover a wide range of important topics like biomanufacturing, advanced rapid prototyping technologies, rapid tooling and manufacturing, micro-fabrication, 3D CAD and data acquisition, and collaborative design.
Download or read book Neotectonics and Quaternary Fault reactivation in Europe s Intraplate Lithosphere written by Sierd Cloetingh and published by Elsevier Science & Technology. This book was released on 2005 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: The EU funded interdisciplinary Environmental Tectonics research program ENTEC has led to new insights into the strength distribution of Europe's intraplate lithosphere, and its relationship with the localization of intraplate deformation and associated vertical motions. Pronounced lateral variations in Europe's intraplate strength occur, as a result of recent thermal perturbation in the underlying mantle and inherited inhomogeneity in lithospheric structures, as a result of Europe's polyphase pre-Quaternary evolution. Results are presented from quantitative subsidence analysis studies, and constraints by geothermochronology, pointing to pronounced acceleration in differential vertical motions and associated topography development in intraplate Europe. These results demonstrate the vulnerability of Europe's lithosphere to neotectonic activity documented by detailed studies in the three natural laboratories of the ENTEC program: (1) the Lower Rhine Graben (LRG), (2) the Upper Rhine Graben (URG), and (3) the Vienna Basin (VB).
Download or read book Wind Energy Explained written by James F. Manwell and published by John Wiley & Sons. This book was released on 2024-04-30 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: WIND ENERGY EXPLAINED Authoritative and bestselling textbook detailing the many aspects of using wind as an energy source Wind Energy Explained provides complete and comprehensive coverage on the topic of wind energy, starting with general concepts like the history of and rationale for wind energy and continuing into specific technological components and applications along with the new recent developments in the field. Divided into 16 chapters, this edition includes up-to-date data, diagrams, and illustrations, boasting an impressive 35% new material including new sections on metocean design conditions, wind turbine design, wind power plants and the electrical system, fixed and floating offshore wind turbines, project development, permitting and environmental risks and benefits, turbine installation, operation and maintenance, and high penetration wind energy systems and power-to-X. Wind Energy Explained also includes information on: Modern wind turbines, covering the design and their many components such as the rotor, drive train, and generator Aerodynamics of wind energy, covering one-dimensional momentum theory, the Betz limit, and ideal horizontal axis wind turbine with wake rotation Environmental external design conditions, such as wind, waves, currents, tides, salinity, floating ice, and many more Commonly used materials and components, such as steel, composites, copper, and concrete, plus machinery elements, such as shafts, couplings, bearings, and gears Modern design methods, including probabilistic design Environmental effects and mitigation strategies for wind project siting and the role of public engagement in the development process This book offers a complete examination of one of the most promising sources of renewable energy and is a great introduction to this cross-disciplinary field for practicing engineers. It may also be used as a textbook resource for university level courses in wind energy, both introductory and advanced.
Download or read book Coastal Engineering 2002 Solving Coastal Conundrums Proceedings Of The 28th International Conference In 3 Vols written by Jane Mckee Smith and published by World Scientific. This book was released on 2003-03-14 with total page 4007 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains more than 300 papers presented at the 28th International Conference on Coastal Engineering, held in Cardiff, Wales, in July 2002. It is divided into five parts: coastal waves; nearshore currents, swash, and long waves; coastal structures; sediment transport; and coastal morphology, beach nourishment, and coastal management. The papers cover a broad range of topics, including theory, numerical and physical modeling, field measurements, case studies, design, and management. Coastal Engineering 2002 provides engineers, scientists, and planners with state-of-the-art information on coastal engineering and coastal processes.
